R. Mahrwald (Ed.) Modern Aldol Reactions Vol. 1: Enolates, Organocatalysis, Biocatalysis and Natural Product Synthesis
...
562 downloads
1462 Views
6MB Size
Report
This content was uploaded by our users and we assume good faith they have the permission to share this book. If you own the copyright to this book and it is wrongfully on our website, we offer a simple DMCA procedure to remove your content from our site. Start by pressing the button below!
Report copyright / DMCA form
R. Mahrwald (Ed.) Modern Aldol Reactions Vol. 1: Enolates, Organocatalysis, Biocatalysis and Natural Product Synthesis
Modern Aldol Reactions. Vol. 1: Enolates, Organocatalysis, Biocatalysis and Natural Product Synthesis. Edited by Rainer Mahrwald Copyright 8 2004 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim ISBN: 3-527-30714-1
Also of Interest Grubbs, R. H. (Ed.)
Handbook of Metathesis 3 Volumes 2003
ISBN 3-527-30616-1
Nicolaou, K. C., Snyder, S. A.
Classics in Total Synthesis II More Targets, Strategies, Methods 2003
ISBN 3-527-30685-4 (Hardcover with CD-Rom) ISBN 3-527-30684-6 (Softcover)
De Meijere, A., Diederich, F. (Eds.)
Metal-Catalyzed Cross-Coupling Reactions Second, Completely Revised and Extended Edition 2 Volumes 2004
ISBN 3-527-30518-1
Krause, N., Hashmi, A. S. K. (Eds.)
Modern Allene Chemistry 2 Volumes 2004
ISBN 3-527-30671-4
Rainer Mahrwald (Ed.)
Modern Aldol Reactions Vol. 1: Enolates, Organocatalysis, Biocatalysis and Natural Product Synthesis
PD Dr. Rainer Mahrwald Department of Organic Chemistry Humboldt University Brook-Taylor-Str. 2 12489 Berlin Germany
9 This book was carefully produced. Nevertheless, editor, authors and publisher do not warrant the information contained therein to be free of errors. Readers are advised to keep in mind that statements, data, illustrations, procedural details or other items may inadvertently be inaccurate. Library of Congress Card No.: Applied for British Library Cataloguing-inPublication Data: A catalogue record for this book is available from the British Library. Bibliographic information published by Die Deutsche Bibliothek Die Deutsche Bibliothek lists this publication in the Deutsche Nationalbibliografie; detailed bibliographic data is available in the Internet at http://dnb.ddb.de ( 2004 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim All rights reserved (including those of translation in other languages). No part of this book may be reproduced in any form – by photoprinting, microfilm, or any other means – nor transmitted or translated into machine language without written permission from the publishers. Registered names, trademarks, etc. used in this book, even when not specifically marked as such, are not to be considered unprotected by law. Printed in the Federal Republic of Germany. Printed on acid-free paper. Typesetting Asco Typesetters, Hong Kong Printing Strauss Gmbh, M€ orlenbach Bookbinding Litges & Dopf Buchbinderei GmbH, Heppenheim ISBN 3-527-30714-1
v
Foreword Historically, the stimulus for the development of a particular reaction has been interconnected with a class of natural products whose synthesis would be greatly facilitated by the use of that particular bond construction. For example, the steroid synthesis challenges proved instrumental in the development of the Diels–Alder reaction. So too the synthesis challenges associated with the macrolide antibiotics have provided the motivation for the development of the full potential of the aldol addition reaction. R. B. Woodward’s 1956 quote on the ‘‘hopelessly complex’’ architecture of the erythromycins was probably stimulated, in part, by the fact that the aldol reaction existed in a completely underdeveloped state five decades ago. O Me
Me Me
OH
Me
OH Me
OH
O
The erythromycin-A structure, as viewed by Woodward in the ’50s
Me O
Et
O
H
O
O Me Me
H
O Me
MeO OH
NMe2 OH
‘‘Erythromycin, with all of our advantages, looks at present quite hopelessly complex, particularly in view of its plethora of asymmetric centers.’’ R. B. Woodward in Perspectives in Organic Chemistry; Todd, A. Ed.; WileyInterscience, New York, 1956, page 160.
The challenges associated with the development of this reaction are also embodied in the more general goals of acyclic stereocontrol that have been under active investigation for nearly twenty-five years. In these studies, the goal of understanding pi-face selectivity at trigonal carbon centers for a multitude of organic transformations has been the ultimate objective. From these research activities, a host of stereochemical models have evolved, such as the Felkin–Anh model for carbonyl addition and the Zimmermann– Traxler aldol stereochemical model for aldol diastereoselection.
vi
Foreword
The development of modern aldol reaction methods has evolved through a succession of pivotal discoveries that have advanced the whole field of stereoselective synthesis: A. Development of enolization strategies for the formation of (E) and (Z) enolates. B. Development of kinetic diastereoselective aldol addition variants through the discovery of optimal metal architectures [B(III), Ti(IV), Sn(II)]. C. Discovery of aldol reaction variants such as the Lewis acid catalyzed addition of enolsilanes to aldehydes (Mukaiyama aldol variant). D. Development of chiral enolates exhibiting exceptional pi-face selectivities. E. Development of chiral metal complexes as Lewis acid aldol catalysts. This two-volume series on aldol addition reaction methodology brings together an up-to-date discussion of all aspects of this versatile process. The reader will gain an appreciation for the role of metal enolate architecture in aldol diastereoselectivities (Vol. I; Chapters 1–3) and for the utility of chiral metal complexes in the catalysis of the Mukaiyama aldol reaction (Vol. II; Chapters 1–3, 5). In Vol. II; Chapter 6, enantioselective catalytic processes incorporating both enolization and addition are surveyed, as is the exciting progress being made in the use of chiral amines as aldol catalysts (Vol. I; Chapter 4). This highly active area of research will continue to develop ever more versatile chiral catalysts and stereochemical control concepts. Students and researchers in the field of asymmetric synthesis will greatly profit from the contributions of this distinguished group of authors who have so insightfully reviewed this topic. May 2004
David A. Evans Harvard University
vii
Contents Volume 1 Preface
xvii
List of Contributors 1
1.1 1.2 1.3 1.4 1.4.1 1.4.1.1 1.4.1.2 1.4.2 1.4.3 1.4.4 1.5
2
2.1 2.2 2.3 2.3.1 2.3.2
xix
Fundamentals and Transition-state Models. Aldol Additions of Group 1 and 2 Enolates 1 Manfred Braun Introduction 1 The Acid or Base-mediated ‘‘Traditional’’ Aldol Reaction 2
The Aldol Addition of Preformed Enolates – Stereoselectivity and Transition-state Models 9 Stereoselective Aldol Addition of Lithium, Magnesium and Sodium Enolates 25 Addition of Chiral Enolates to Achiral Carbonyl Compounds 26 a-Substituted Enolates 26 a-Unsubstituted Enolates 32 Addition of Achiral Enolates to Chiral Carbonyl Compounds 41 Addition of Chiral Enolates to Chiral Carbonyl Compounds 49 Addition of Achiral Enolates to Achiral Carbonyl Compounds in the Presence of Chiral Additives and Catalysts 51 Conclusion 52 References 53 The Development of Titanium Enolate-based Aldol Reactions Arun K. Ghosh, M. Shevlin Introduction 63 Additions of Enolates to Ketones 65
63
Addition of Enolates Without a-Substituents to Aldehydes 66 Stereoselective Acetate Aldol Reactions Using Chiral Auxiliaries 67 Stereoselective Acetate Aldol Reactions Involving Chiral Titanium Ligands 69
viii
Contents
2.3.3 2.4 2.4.1 2.4.1.1 2.4.1.1.1 2.4.1.1.2 2.4.1.1.3 2.4.1.2 2.4.1.2.1 2.4.1.2.2 2.4.1.2.3 2.4.1.2.4 2.4.1.3 2.4.1.4 2.4.2 2.4.2.1 2.4.2.2 2.4.2.2.1 2.4.2.2.2 2.4.2.3 2.5 2.5.1 2.5.1.1 2.5.1.2 2.5.1.3 2.5.1.4 2.5.2 2.5.2.1 2.5.2.2 2.5.2.3 2.5.2.4 2.5.2.5 2.5.3 2.5.3.1 2.5.3.2 2.5.3.3 2.5.3.4 2.5.3.5 2.6 2.6.1
Alternative Approaches to Acetate Aldol Adducts 70 Addition of Enolates with a-Substituents to Aldehydes 72 Syn Diastereoselectivity 74 Synthesis of syn Aldols in Racemic Form 75 Reactions of Ketones 75 Reactions of Esters and Thiol Esters 77 Aldol Reactions of Aldehyde Hydrazones 78 Synthesis of Optically Active syn Aldols Using Chiral Auxiliaries 80 Amino Acid-derived Oxazolidinone and Related Auxiliaries 80 Camphor-derived Chiral Auxiliaries 84 Aminoindanol and Amino Acid-derived Chiral Auxiliaries 87 Other Chiral Auxiliaries 90 Synthesis of Optically Active syn Aldols Using Chiral Titanium Ligands 92 Synthesis of Optically Active syn Aldols with Chiral Enolates 95 Anti Diastereoselectivity 98 Synthesis of anti Aldols in Racemic Form 98 Synthesis of Optically Active anti Aldols by Use of Chiral Auxiliaries 99 Aminoindanol and Related Chiral Auxiliaries 99 Oxazolidinethione and Oxazolidineselone Chiral Auxiliaries 103 Synthesis of Optically Active anti Aldols by Use of Chiral Titanium Ligands 104 Natural Product Synthesis via Titanium Enolate Aldol Reactions 105 Lactone Natural Products 105 Tetrahydrolipstatin 106 Myxopyronins A and B 106 Callystatin A 107 AI-77-B 108 Macrolide Natural Products 110 Epothilone 490 110 Cryptophycin B 110 Amphidinolide T1 111 Rapamycin 112 Spongistatins 1 and 2 113 Miscellaneous Natural Products 114 Tautomycin 114 Crocacin C 115 Stigmatellin A 116 Denticulatin B 117 Membrenone C 119 Typical Experimental Procedures for Generation of Titanium Enolates 120 Experimental Procedures 120
Contents
2.6.2 2.7
Alternative Approaches to Titanium Enolate Generation Conclusion 121 References 122
3
Boron and Silicon Enolates in Crossed Aldol Reaction Teruaki Mukaiyama and Jun-ichi Matsuo Introduction 127
3.1 3.2 3.2.1 3.2.2 3.2.3 3.2.4 3.2.5 3.2.6 3.3 3.3.1 3.3.2 3.3.3 3.3.4 3.3.5 3.3.6 3.3.6.1 3.3.6.2
4
4.1 4.2 4.2.1 4.2.1.1 4.2.1.2 4.2.2 4.2.2.1 4.2.2.2 4.3 4.3.1 4.3.1.1 4.3.1.2 4.3.2 4.3.2.1
121
127
Crossed Aldol Reactions Using Boron Enolates 127 Discovery of Aldol Reaction Mediated by Boron Enolates 127 New Method for Direct Generation of Boron Enolates 129 Regioselectivity on Generation of Boron Enolates 130 Stereoselective Formation of (E) or (Z) Boron Enolates 131 syn-Selective Asymmetric Boron Aldol Reactions 134 anti-Selective Asymmetric Aldol Reaction 135 Crossed Aldol Reactions Using Silicon Enolates 137 Discovery of Silicon Enolate-mediated Crossed Aldol Reactions 137 Lewis Acid-catalyzed Aldol Reactions of Silicon Enolates 143 Non-catalyzed Aldol Reactions of Silicon Enolates 147 Lewis Base-catalyzed Aldol Reactions of Trimethylsilyl Enolates 148 Diastereoselective Synthesis of Polyoxygenated Compounds 149 Asymmetric Aldol Reactions Using Chiral Tin(II) Lewis Acid Catalysts 150 Stoichiometric Enantioselective Aldol Reaction 151 Catalytic Enantioselective Aldol Reaction 154 References 155 Amine-catalyzed Aldol Reactions Benjamin List Introduction 161
161
Aminocatalysis of the Aldol Reaction 162 Intermolecular Aldolizations 163 Aldehyde Donors 164 Ketone Donors 166 Intramolecular Aldolizations 167 Enolexo Aldolizations 167 Enolendo Aldolizations 171 Asymmetric Aminocatalysis of the Aldol Reaction Intramolecular Aldolizations 173 Enolendo Aldolizations 173 Enolexo Aldolizations 177 Intermolecular Aldolizations 179 Ketone Donors 179
173
ix
x
Contents
4.3.2.2
Aldehyde Donors References 196
5
Enzyme-catalyzed Aldol Additions Wolf-Dieter Fessner Introduction 201 General Aspects 202 Classification of Lyases 202
5.1 5.2 5.2.1 5.2.2 5.2.3 5.3 5.3.1 5.3.2 5.3.3 5.3.4 5.4 5.4.1 5.4.2 5.4.3 5.4.4 5.4.5 5.4.6 5.5 5.6 5.7 5.8 5.9
6
6.1 6.2 6.2.1 6.2.2 6.2.2.1 6.2.2.2 6.2.2.3 6.3 6.3.1 6.3.2
193
201
Enzyme Structure and Mechanism 204 Practical Considerations 207 Pyruvate Aldolases 208 N-Acetylneuraminic Acid Aldolase 208 KDO Aldolase 216 DAHP Synthase 217 KDPG Aldolase and Related Enzymes 218 Dihydroxyacetone Phosphate Aldolases 221 FruA 222 TagA 224 RhuA and FucA 224 DHAP Synthesis 227 Applications 230 Aldol Transfer Enzymes 246 Transketolase and Related Enzymes 247 2-Deoxy-D-ribose 5-Phosphate Aldolase 250 Glycine Aldolases 254 Recent Developments 257 Summary and Conclusion 258 References 260 Antibody-catalyzed Aldol Reactions 273 Fujie Tanaka and Carlos F. Barbas, III Introduction 273 Generation of Aldolase Antibodies 273 Antibody as Catalyst Scaffold 273
Generation of Aldolase Antibodies that Operate via an Enamine Mechanism 274 Reactive Immunization with the Simple Diketone Derivative 275 Combining Reactive Immunization with Transition-state Analogs 277 Reactive Immunization with other Diketones 279 Aldolase Antibody-catalyzed Aldol and Retro-aldol Reactions 279 Antibody 38C2-catalyzed Aldol Reactions 280 Antibody 38C2-Catalyzed Retro-aldol Reactions and their Application to Kinetic Resolution 283
Contents
6.3.3 6.3.4 6.3.5 6.3.6 6.4 6.5 6.6 6.7 6.8 6.9 6.10
Aldol and Retro-aldol Reactions Catalyzed by Antibodies 93F3 and 84G3 285 Preparative-scale Kinetic Resolution Using Aldolase Antibodies in a Biphasic Aqueous–Organic Solvent System 288 Aldolase Antibody-catalyzed Reactions in Natural Product Synthesis 290 Retro-aldol Reactions in Human Therapy: Prodrug Activation by Aldolase Antibody 291 Aldolase Antibodies for Reactions Related to an Enamine Mechanism and the Nucleophilic Lysine e-Amino Group 293 Concise Catalytic Assays for Aldolase Antibody-catalyzed Reactions 297 Structures of Aldolase Antibodies and Reaction Mechanism of Nucleophilic Lysine e-Amino Group 298 Evolution of Aldolase Antibodies In Vitro 302 Cofactor-mediated Antibody-catalyzed Aldol and/or Retro-aldol Reactions 305 Summary and Conclusion 305 Experimental Procedures 306 Acknowledgments 307 References 307
7
The Aldol Reaction in Natural Product Synthesis: The Epothilone Story 311 Dieter Schinzer
7.1
History of Epothilones: Biological Source, Isolation, and Structural Elucidation 311 History of Epothilones: The Total Synthesis Race 311 Different Strategies with Aldol Reactions: The Danishefsky Synthesis of Epothilone A Relying on Intramolecular Aldol Reaction 312 Different Strategies with Aldol Reactions: The Nicolaou Synthesis of Epothilone A Using an Unselective Aldol Reaction 313 Different Strategies with Aldol Reactions: The Schinzer Synthesis of Epothilone A with Complete Stereocontrol in the Aldol Reaction 314 Model Study via Chelation Control in the Aldol Reaction by Kalesse 319 Different Aldol Strategies: Mulzer’s Total Syntheses of Epothilones B and D 320 Long-range Structural Effects on the Stereochemistry of Aldol Reactions 322 Summary and Conclusion 326 References 326
7.2 7.2.1
7.2.2 7.2.3
7.3 7.3.1 7.4 7.5
Index
329
xi
xii
Contents
Volume 2 Preface
xvii
List of Contributors 1
1.1 1.2 1.3 1.4 1.5
2
2.1 2.1.1 2.1.2 2.1.3 2.1.4 2.2 2.2.1 2.2.2 2.2.3 2.3 2.3.1 2.3.2 2.3.3 2.3.4
3
3.1 3.2 3.3 3.3.1 3.3.1.1 3.3.1.2 3.3.2 3.3.2.1 3.3.2.2
xix
Silver, Gold, and Palladium Lewis Acids Akira Yanagisawa Introduction 1
1
Mukaiyama Aldol Reaction and Related Reactions 1 Asymmetric Aldol Reactions of a-Isocyanocarboxylates Summary and Conclusions 15 Experimental Procedures 18 References 21
8
Boron and Silicon Lewis Acids for Mukaiyama Aldol Reactions Kazuaki Ishihara and Hisashi Yamamoto Achiral Boron Lewis Acids 25 Introduction 25 BF3 Et2 O 26 B(C6 F5 )3 29 Ar2 BOH 30 Chiral Boron Lewis Acids 33 Introduction 33 Chiral Boron Lewis Acids as Stoichiometric Reagents 33 Chiral Boron Lewis Acids as Catalytic Reagents 40 Silicon Lewis Acids 53 Introduction 53 Lewis Acidity of Silicon Derivatives 54 Silicon Lewis Acids as Catalytic Reagents 55
25
Activation of Silicon Lewis Acids by Combination with Other Lewis Acids 60 References 65 Copper Lewis Acids 69 Jeffrey S. Johnson and David A. Nicewicz Introduction 69 Early Examples 69
Mukaiyama Aldol Reactions with Cu(II) Complexes 70 Enolsilane Additions to (Benzyloxy)acetaldehyde 70 Scope and Application 70 Mechanism and Stereochemistry 75 Enolsilane Additions to a-Keto Esters 80 Scope and Application 80 Mechanism and Stereochemistry 85
Contents
3.3.3 3.4 3.4.1 3.4.2 3.4.3 3.4.4 3.4.4.1 3.4.4.2 3.4.5 3.5
4
4.1 4.2 4.2.1 4.2.2 4.2.3 4.2.4 4.3 4.3.1 4.3.2 4.4 4.4.1 4.4.2 4.4.3 4.4.4 4.4.5 4.4.6
Enolsilane Additions to Unfunctionalized Aldehydes 88 Additions Involving In-Situ Enolate Formation 90 Pyruvate Ester Dimerization 90 Addition of Nitromethane to a-Keto Esters 91 Malonic Acid Half Thioester Additions to Aldehydes 94 Dienolate Additions to Aldehydes 96 Scope and Application 96 Mechanistic Considerations 97 Enantioselective Cu(II) Enolate-Catalyzed Vinylogous Aldol Reactions 99 Conclusions 101 References 102 Tin-promoted Aldol Reactions and their Application to Total Syntheses of Natural Products 105 Isamu Shiina Introduction 105 Tin-promoted Intermolecular Aldol Reactions 105 Achiral Aldol Reactions 105 The Reaction of Silyl Enolates with Aldehydes or Ketones 108 The Reaction of Silyl Enolates with Acetals 117 Reaction of Dienol Silyl Ethers 120 Tin-promoted Intramolecular Aldol Reactions 121 The Intramolecular Aldol Reaction of Silyl Enolates 121 Reaction of Dienol Silyl Ethers or g-Silyl-a,b-enones 123 Chiral Diamine–Sn(II) Complex-promoted Aldol Reactions 124 Asymmetric Aldol and Related Reactions of Sn(II) Enolates 125 Chiral Diamine–Sn(II) Complex-promoted Aldol Reactions 128 Asymmetric Aldol Reaction of Silyl Enolates 129 Catalytic Asymmetric Aldol Reaction 131 Asymmetric Synthesis of syn- and anti-1,2-Diol Groups 135
Enantioselective Synthesis of Both Enantiomers of Aldols Using Similar Diamines Derived from L-Proline 139 4.5 Asymmetric Total Syntheses of Complex Molecules Using Chiral Diamine–Sn(II) Catalysts 140 4.5.1 Monosaccharides 140 4.5.2 Leinamycin and a Part of Rapamycin 142 4.5.3 Sphingosine, Sphingofungins, and Khafrefungin 145 4.5.4 Febrifugine and Isofebrifugine 147 4.5.5 Altohyrtin C (Spongistatin 2) and Phorboxazole B 148 4.5.6 Paclitaxel (Taxol) 149 4.5.7 Cephalosporolide D 153 4.5.8 Buergerinin F 153 4.5.9 Octalactins A and B 154 4.5.10 Oudemansin-antibiotic Analog 155
xiii
xiv
Contents
4.6 4.7
Conclusions 157 Experimental 158 References 159
5
Zirconium Alkoxides as Lewis Acids 167 Yasuhiro Yamashita and Shu¯ Kobayashi Introduction 167
5.1 5.2 5.3 5.4 5.5 5.6 5.7 5.8
6
6.1 6.2 6.3 6.4 6.5 6.6 6.7 6.8
7
The Asymmetric Mukaiyama Aldol Reaction 169 Asymmetric Hetero Diels–Alder Reaction 175 Reaction Mechanism 180 Structure of the Chiral Zirconium Catalyst 184 Air-stable and Storable Chiral Zirconium Catalyst 187 Conclusion 190 Experimental 191 References 192 Direct Catalytic Asymmetric Aldol Reaction Using Chiral Metal Complexes 197 Masakatsu Shibasaki, Shigeki Matsunaga, and Naoya Kumagai Introduction 197 Direct Aldol Reactions with Methyl Ketones 198 Direct Aldol Reactions with Methylene Ketones 208 Direct Aldol Reaction with a-Hydroxyketones 210 Direct Aldol Reaction with Glycine Schiff Bases 219 Other Examples 221 Conclusion 224 Experimental Section 225 References and Notes 226
Catalytic Enantioselective Aldol Additions with Chiral Lewis Bases Scott E. Denmark and Shinji Fujimori 7.1 Introduction 229 7.1.1 Enantioselective Aldol Additions 229 7.1.1.1 Background 230 7.1.2 Lewis Base Catalysis 233 7.1.3 Organization of this Chapter 235 7.2 Preparation of Enoxytrichlorosilanes 236 7.2.1 General Considerations 238 7.2.2 Preparation of Ketone-derived Trichlorosilyl Enolates 240 7.2.3 Preparation of Aldehyde-derived Trichlorosilyl Enolates 246 7.2.4 Preparation of Trichlorosilyl Ketene Acetals 248 7.3 Preparation of Chiral Lewis Bases 249 7.3.1 Preparation of Chiral Phosphoramides 250 7.3.2 Synthesis of Chiral bis-N-Oxides 251
229
Contents
7.4 7.4.1 7.4.2 7.4.3 7.5 7.5.1 7.5.1.1 7.5.1.2 7.5.2 7.5.2.1 7.5.2.2 7.5.3 7.6 7.7 7.8 7.9 7.9.1 7.9.2 7.9.3 7.10 7.11 7.11.1 7.11.2
8
8.1 8.2 8.2.1 8.2.2 8.2.3 8.2.4 8.3
Enantioselective Aldol Addition of Achiral Enoxytrichlorosilanes 253 Aldol Additions of Achiral Methyl Ketone-derived Enolates 254 Aldol Additions of Cyclic Trichlorosilyl Enolates 263 Addition of Acyclic Ethyl Ketone-derived Enolates 267 Diastereoselective Additions of Chiral Enoxytrichlorosilanes 272 Aldol Addition of Lactate-derived Enoxytrichlorosilanes 273 Methyl Ketone-derived Enolates 273 Ethyl Ketone-derived Enolates 277 Aldol Addition of b-Hydroxy-a-Methyl Ketone-derived Enoxytrichlorosilanes 280 Methyl Ketone-derived Enolates 280 Ethyl Ketone-derived Enolates 282 Addition of Enoxytrichlorosilanes with a b-Stereogenic Center 283 Aldol Additions of Aldehyde-derived Enoxytrichlorosilanes 288 Aldol Addition of Trichlorosilyl Ketene Acetal to Aldehydes and Ketones 294 Lewis Base Activation of Lewis Acids – Aldol Additions of Silyl Enol Ethers to Aldehydes 298 Toward a Unified Mechanistic Scheme 305 Cationic Silicon Species and the Dual-pathway Hypothesis 306 Unified Mechanistic Scheme 310 Structural Insights and Modifications 312 Conclusions and Outlook 315 Representative Procedures 316 Preparation of Enoxytrichlorosilanes 316 Aldol Addition of Ketone-derived Enoxytrichlorosilane 317 References 319 The Aldol–Tishchenko Reaction R. Mahrwald Introduction 327
327
The Aldol–Tishchenko Reaction 327 The Aldol–Tishchenko Reaction with Enolizable Aldehydes 327 The Aldol–Tishchenko Reaction with Ketones and Aldehydes 329 The Evans–Tishchenko Reduction 334 Related Reactions 339 Representative Procedures 341 References 342 Index
345
xv
xvii
Preface The aldol reaction was first described by Kane in 1848. Thus it is high time to provide a comprehensive overview of the different developments in aldol chemistry, especially those of the past few decades. Demands for this important method of CaCabond formation came and continue to come from every field of synthetic chemistry, particularly from natural product synthesis. Here, challenging problems in regioselectivity, chemoselectivity, diastereoselectivity and enantioselectivity frequently arise, many of which are still awaiting a solution. Symptomatically the word ‘‘selectivity’’ in its various connotations occurs no fewer than 1,100 times in both volumes, i.e. an average of twice a page. This book examines the enormous variety of aldol chemistry from the view of both organic as well as inorganic and bioorganic chemistry. It presents a wide range of potent syntheses based on the discoveries from enolate chemistry or the catalysis of Lewis acids and Lewis bases, for instance. The important role of metal catalysis, organocatalysis and direct aldol addition is described, along with enzymatic methods. However, it was not our intention to simply list all existing publications about aldol chemistry. Instead, we wanted to point out fundamental and at the same time efficient ways leading to defined configured aldol products. Two of these are depicted on the cover: the metal catalysis and the enzymatic method. It is now my pleasure to express my profound gratitude to the 22 authors and co-authors, all belonging to the elite of aldol chemistry, for their outstanding contributions and their professional cooperation. Special thanks are due to Wiley-VCH, especially Elke Maase and Rainer Mu¨nz, for their fine work in turning the manuscript into the finished book. Finally, I am indebted to my wife and my son for countless hours of assistance. Last but not least, this book is also a tribute to the works of Teruaki Mukaiyama, who has done tremendous work in the field of aldol reaction and now celebrates his 77th birthday. Berlin, Germany May 2004
Rainer Mahrwald
xix
List of Contributors Editor PD Dr. Rainer Mahrwald Institut fu¨r Organische und Bioorganische Chemie der Humboldt-Universita¨t zu Berlin Brook-Taylor-Str. 2 12489 Berlin Germany Authors Prof. Dr. Carlos F. Barbas, III The Skaggs Institute for Chemical Biology and the Department of Molecular Biology The Scripps Research Institute 10550 North Torrey Pines Road La Jolla, CA 92037 USA Prof. Dr. Manfred Braun Institut fu¨r Organische Chemie und Makromolekulare Chemie I Heinrich-Heine-Universita¨t Du¨sseldorf Universita¨tsstr. 1 40225 Du¨sseldorf Germany Prof. Dr. Scott E. Denmark 245 Roger Adams Laboratory, Box 18 Department of Chemistry University of Illinois 600 S. Mathews Avenue Urbana, IL 61801 USA Prof. Dr. Wolf-Dieter Fessner TU Darmstadt Department of Organic Chemistry and Biochemistry Petersenstr. 22 64287 Darmstadt Germany
Shinji Fujimori 236 Roger Adams Laboratory, Box 91-5 Department of Chemistry University of Illinois 600 S. Mathews Avenue Urbana, IL 61801 USA
Prof. Dr. Arun K. Ghosh Department of Chemistry University of Illinois at Chicago 845 West Taylor Street Chicago, IL 60607 USA
Prof. Dr. Kazuaki Ishihara Graduate School of Engineering Nagoya University Chikusa Nagoya, 464-8603 Japan
Prof. Dr. Jeffrey S. Johnson Department of Chemistry University of North Carolina at Chapel Hill Chapel Hill, NC 27599-3290 USA
Prof. Dr. Shu¯ Kobayashi Graduate School of Pharmaceutical Sciences The University of Tokyo Hongo, Bunkyo-ku Tokyo 113-0033 Japan
xx
List of Contributors Naoya Kumagai Graduate School of Pharmaceutical Sciences The University of Tokyo Hongo 7-3-1, Bunkyo-ku Tokyo, 113-0033 Japan
Michael Shevlin Department of Chemistry University of Illinois at Chicago 845 West Taylor Street Chicago, IL 60607 USA
Prof. Dr. Benjamin List Max-Planck-Institut fu¨r Kohlenforschung Kaiser-Wilhelm-Platz 1 45470 Mu¨lheim an der Ruhr Germany
Prof. Dr. Masakatsu Shibasaki Graduate School of Pharmaceutical Sciences The University of Tokyo Hongo 7-3-1, Bunkyo-ku Tokyo, 113-0033 Japan
PD Dr. Rainer Mahrwald Institut fu¨r Organische und Bioorganische Chemie der Humboldt-Universita¨t zu Berlin Brook-Taylor-Str. 2 12489 Berlin Germany Prof. Dr. Shigeki Matsunaga Graduate School of Pharmaceutical Sciences The University of Tokyo Hongo 7-3-1, Bunkyo-ku Tokyo, 113-0033 Japan Dr. Jun-ichi Matsuo The Kitasato Institute Center for Basic Research (TCI) 6-15-5 Toshima Kita-ku, Tokyo 114-003 Japan Prof. Dr. Teruaki Mukaiyama The Kitasato Institute Center for Basic Research (TCI) 6-15-5 Toshima Kita-ku, Tokyo 114-003 Japan David A. Nicewicz Department of Chemistry University of North Carolina at Chapel Hill Chapel Hill, NC 27599-3290 USA Prof. Dr. Dieter Schinzer Otto-von-Guericke-Universita¨t Magdeburg Chemisches Institut Universita¨tsplatz 2 39106 Magdeburg Germany
Prof. Dr. Isamu Shiina Department of Applied Chemistry Faculty of Science Tokyo University of Science Kagurazaka, Shinjuku-ku Tokyo 162-8601 Japan Prof. Dr. Fujie Tanaka Department of Molecular Biology The Scripps Research Institute 10550 North Torrey Pines Road La Jolla, CA 92037 USA Prof. Dr. Hisashi Yamamoto Department of Chemistry The University of Chicago 5735 S. Ellis Avenue Chicago, IL 60637 USA Dr. Yasuhiro Yamashita Graduate School of Pharmaceutical Sciences The University of Tokyo Hongo, Bunkyo-ku Tokyo 113-0033 Japan Prof. Dr. Akira Yanagisawa Department of Chemistry Faculty of Science Chiba University Inage, Chiba 263-8522 Japan
1
1
Fundamentals and Transition-state Models. Aldol Additions of Group 1 and 2 Enolates* Manfred Braun 1.1
Introduction
In an aldol reaction, an enolizable carbonyl compound reacts with another carbonyl compound that is either an aldehyde or a ketone. The enolizable carbonyl compound, which must have at least one acidic proton in its aposition, acts as a nucleophile, whereas the carbonyl active component has electrophilic reactivity. In its classical meaning the aldol reaction is restricted to aldehydes and ketones and can occur between identical or nonidentical carbonyl compounds. The term ‘‘aldol reaction’’, in a more advanced sense, is applied to any enolizable carbonyl compounds, for example carboxylic esters, amides, and carboxylates, that add to aldehydes or ketones. The primary products are always b-hydroxycarbonyl compounds, which can undergo an elimination of water to form a,b-unsaturated carbonyl compounds. The reaction that ends with the b-hydroxycarbonyl compound is usually termed ‘‘aldol addition’’ whereas the reaction that includes the elimination process is denoted ‘‘aldol condensation’’. The ‘‘traditional’’ aldol reaction [1] proceeds under thermodynamic control, as a reversible reaction, mediated either by acids or bases. In contrast, modern aldol methods rely on the irreversible formation of ‘‘preformed enolates’’ which are added to aldehydes or ketones. In any case, the aldol reaction has proven itself by a plethora of applications to be one of the most reliable methods for carbon–carbon bond-formation yielding either carbon chains, with oxygen functionality in 1,3-positions, or alkenes, by a carbonyl olefination process [2, 3]. The first example of this reaction, the acid-catalyzed self-condensation of acetone to give mesityl oxide, was reported more than one and a half centuries ago by Kane [4]. The condensation of an aromatic aldehyde with an aliphatic aldehyde or ketone, obviously the first example of an aldol condensation under basic conditions, was reported by Schmidt [5] and by *
This chapter is dedicated to the memory of Ulrike Mahler (deceased 1995) and Ralf Devant (deceased 2002).
Modern Aldol Reactions. Vol. 1: Enolates, Organocatalysis, Biocatalysis and Natural Product Synthesis. Edited by Rainer Mahrwald Copyright 8 2004 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim ISBN: 3-527-30714-1
2
1 Fundamentals and Transition-state Models. Aldol Additions of Group 1 and 2 Enolates
Claisen and Clapare`de [6], and named after the inventors (‘‘Claisen– Schmidt condensation’’) [2]. Obviously, Wurtz first recognized [7] the simultaneous presence of aldehyde and alcohol moieties in the ‘‘aldol’’ 1 resulting from the acid-induced reaction of acetaldehyde, and the reaction was named after the product it leads to later on (Eq. (1)). O H
H 3C
OH
HCl, H2O
O
ð1Þ
H
H 3C 1
1.2
The Acid or Base-mediated ‘‘Traditional’’ Aldol Reaction
Several reaction conditions feature in this ‘‘traditional’’ transformation. First, the reaction is run in protic solvents and can be mediated either by acid or by base. Second, the reaction is reversible, particularly under these conditions. Finally, the enol or the enolate, which acts as a nucleophile, is inevitably generated in the presence of the aldehyde or ketone that functions as an electrophile. The aldol reaction performed under these conditions (Scheme 1.1) was ‘‘the state of the art’’ until the early nineteenseventies, when the chemistry of ‘‘preformed enolates’’ emerged. The ‘‘traditional’’ aldol reaction has been the subject of several reviews, among which the summary by Nielsen and Houlihan in ‘‘Organic Reactions’’ in 1968 is a classical contribution and a very valuable survey [1]. The subject has also been treated in House’s monograph [2] and, more recently, by Heathcock [3]. Thus, only general features and few representative examples of ‘‘traditional’’ aldol addition will be given here; the reader is referred to the above-mentioned surveys for more details. Synthetically the reversibility of the aldol addition can cause substantial problems. Investigations performed in order to determine the relative energies of an enolate and an aldehyde on the one hand and the aldolate on the other revealed the outcome of the aldol reaction to be slightly exergonic [8]. The aldol formed by either acid- or base-catalyzed reaction is significantly stabilized by a strong OH bond in the aldol 2 which arises either directly from acid-mediated addition or on protonation of the aldolate 3 in the base-catalyzed variant, as shown in Scheme 1.1. Alternatively, chelation of the counter-ion in aldolates resulting from preformed enolates in non-protic media serves as the driving force [9]. As a general rule, applicable for protic solvents, the equilibrium in an aldol addition is located on the product side when aldehydes react with each other (Eq. (2)), but on the side of the starting materials for ketones (Eq. (3)). OH
O 2
R
O
R H
H R
ð2Þ
1.2 The Acid or Base-mediated ‘‘Traditional’’ Aldol Reaction
acid catalysis H
O H
O +
R
O
R
R
H
H
O
H
H R
H (cat)
2
O
H2O
R
OH
H OH H2O +
R
O
O
O H
R
O
R
H
H
R 3
basic catalysis Scheme 1.1
Aldol addition: general acidic and basic catalysis.
OH O 2
R
O
R
R
R R
ð3Þ
R
As a consequence, self-addition of enolizable aldehydes is usually readily accomplished in aqueous basic media if sufficient solubility is not prevented by the extended length of the carbon chain. The aldol addition (Eq. (4)) and condensation (Eq. (5)) of butanal giving 2-ethyl-3-hydroxyhexanal [10] and 2ethylhexenal [11], respectively, can serve as illustrative examples. The selfaddition of enolizable ketones, on the other hand, does not, per se, lead to substantial amounts of the aldol product, because of the unfavorable equilibrium mentioned above. This equilibrium can, however, often be shifted by a subsequent elimination step, so the aldol condensation of ketones is more frequently applied than addition. There are also special procedures that enable shifting of the equilibrium in the aldol reaction of ketones towards the products. Among these the formation of ‘‘diacetone’’ 4 by heating acetone under reflux in a Soxhlet apparatus filled with calcium or barium hydroxide is a well-known procedure which avoids contact of the base with the non-volatile hydroxy ketone 4 thus preventing a retro aldol reaction from occurring (Eq. (6)) [12, 13].
3
4
1 Fundamentals and Transition-state Models. Aldol Additions of Group 1 and 2 Enolates
OH O
O
KOH, H2O 75%
H
86%
H
Ba(OH)2 Soxhlet, reflux
O
ð4Þ
H
ð5Þ
O
NaOH, H2O 80°C
O
H
OH
O
ð6Þ
75% 4
Mixed aldol reactions between different aldehydes or ketones are usually plagued by formation of a mixture of products, because each component can function as a CH-acidic and carbonyl-active compound. Whereas the ‘‘directed aldol reaction’’ [14–16] is a rather general solution to this problem, the traditional aldol addition of non-identical carbonyl compounds is only successful when applied within the framework of a limited substitution pattern. Thus, a fruitful combination in mixed aldol reactions is that of an aldehyde with an enolizable ketone. Obviously, the aldehyde, having higher carbonyl reactivity, reacts as the electrophilic component, whereas the ketone, with comparatively lower carbonyl reactivity, serves as the CH-acidic counterpart. Because the self-aldolization of ketones is endothermic, this type of side reaction does not occur to a significant extent, so the product of the mixed aldol condensation is obtained in fair yield, as illustrated by the formation of ketone 6 from citral 5 and acetone, a key step in the synthesis of b-ionone (Eq. (7)) [17]. O
O + H
5
O
NaOEt 45-49% 6
ð7Þ The most efficient variant of this combination is based on reaction of an enolizable ketone with a non-enolizable aldehyde, so that self-condensation of the latter cannot occur. Several examples of this type of combination in aldol reactions are given in Scheme 1.2. Usually in situ elimination occurs, so a,b-unsaturated ketones result, in particular when aromatic aldehydes are condensed with ketones (‘‘Claisen–Schmidt reaction’’) [18–21]. The intramolecular aldol condensation of dialdehydes, ketoaldehydes, and
1.2 The Acid or Base-mediated ‘‘Traditional’’ Aldol Reaction
NaOH, H2O, EtOH 20–25°C
O
O +
2 Ph
H3C
H
H O
+
+ Ph
H
ref. [18] Ph
Ph
CH3 O
ref. [19]
O
NaOH, H2O, EtOH 15–30°C
O
O
60–66%
CH3
H3C
O
1. NaOH, H2O 2. H
O
O
Ph
90-94%
CH3
5
85%
CH3
O ref. [20] Ph
Ph
OCH3 OCH3
CH3
H3C
CH3
H + O
NaOH, H2O, EtOH 25°C
CH3 CH3 ref. [21]
88% O O
Scheme 1.2
Illustrative examples of the condensation of aromatic aldehydes with enolizable ketones (‘‘Claisen–Schmidt reaction’’).
diketones is one of the most efficient means of synthesizing five, six, and seven-membered rings. There are numerous applications of this variant of the aldol reaction, in particular in the context of the Robinson annelation reaction, described in the literature for decades. Because this topic has been reviewed comprehensively [22, 23], a few illustrative examples only will be given here. An early and rather prominent example of the intramolecular aldol condensation is found in Woodward’s synthesis of cholesterol [24]. Because the precursor 7 is an unsymmetrical dialdehyde, the problem of regioselectivity arises. Nevertheless, the a,b-unsaturated aldehyde 8 is formed in excess and only minor amounts of the regioisomer 9 are obtained (Eq. (8)). Complete regioselectivity was observed, however, when dialdehyde 10 was submitted to an intramolecular aldol condensation. Thus, the enal 11 was obtained exclusively in the first synthesis of genipin described by Bu¨chi and coworkers (Eq. (9)) [25].
1 Fundamentals and Transition-state Models. Aldol Additions of Group 1 and 2 Enolates
6
H
H
piperidine, AcOH, benzene 60°C
CHO CHO
66%
H O 7
CHO H
H
H
H
+ H
H
CHO
O
O 8
9
ð8Þ MeO2C
MeO2C
H
O OH
CHO
piperidine, AcOH
CHO
68%
H
ð9Þ
O
H
OH
10
H
CHO
11
When ketoaldehydes, compounds that are unsymmetrical per se, are submitted to intramolecular aldol condensation the ketone usually acts as the CH-acidic component whereas the aldehyde plays the role of the carbonyl active counterpart. This regiochemical outcome is also favored when the conditions of a thermodynamic control are used. Again, this type of aldol condensation has been used in a variety of natural products synthesis. A steroid synthesis, the aldolization step of which is given in Eq. (10), is an illustrative example [26]. O O H H
O
CHO
KOH, H2O 50–80°C
H
73%
H
O O
O
ð10Þ When this type of stereochemical outcome is prevented by steric hindrance, the two carbonyl groups can play opposite roles in the sense that the aldehyde, deprotonated in its a-position, functions as nucleophile whereas
1.2 The Acid or Base-mediated ‘‘Traditional’’ Aldol Reaction
the ketone acts as the carbonyl-active compound, as shown in the example given in Eq. (11) [27]. OCH2Ph
OCH2Ph O
Na2CO3, EtOH, H2O
ð11Þ
46% H
O
CHO
Although problems of regiochemistry are inherent, the aldol condensation of diketones has found wide application. Typical examples are syntheses of cyclopentenones and cyclohexenones from 1,4- and 1,5-diketones, respectively. The concept is illustrated by a synthesis of jasmone 12 (Eq. (12)) [28] and of the homosteroid derivative 13, the latter arising under thermodynamic control in a Robinson annelation reaction (Eq. (13)) [29]. O
O
ð12Þ
O 12 OMe MeO
+ O O OMe
OMe
O
O
O 13
ð13Þ Intramolecular aldol condensations also serve as the key step in ‘‘biomimetic’’ syntheses of polyketides, synthetic strategies that try to imitate in vitro a proven or an assumed biosynthetic pathway [30]. Although the first attempts in this direction go back to the early 20th century [31], practical and efficient syntheses based on this concept were elaborated much later.
7
8
1 Fundamentals and Transition-state Models. Aldol Additions of Group 1 and 2 Enolates
O O
OEt O
O
+
O
O
O O
O
O
2
O
O OEt
O
O
14
15
O
OH
16
OH
O
O O
O
O
OH
39%
O
O
OH 17 OH
OH
O
94%
OH
1. HCl 2. HI, HOAc
KOH, MeOH
O
OH
78%
O
OH
OH
HO 18
OH
O
OH
70% HO O 19 Scheme 1.3
Biomimetic synthesis of emocline 19 involving intramolecular aldol reactions.
The concept is illustrated in Scheme 1.3 – when intermediate 16 containing a carbon chain with six free keto groups and one protected keto group has been generated by twofold Claisen condensation of the diester 14 with the highly reactive dianion 15, it undergoes spontaneous aldol condensation followed by aromatization to give the naphthalene derivative 17. A further aldol addition, which leads to the formation of a third six-membered ring, needs treatment with potassium hydroxide. Finally, dehydration and deprotection lead to the anthrone 18, which is readily oxidized to the natural product emodine 19 [32]. Similar approaches based on intramolecular aldol reactions have been applied to the synthesis of naturally occurring anthracyclinones [33] and isoquinolines [34]; the biosynthesis of these is known to involve polyketone intermediates. The problem of stereochemistry has very rarely been addressed by tra-
1.3 The Aldol Addition of Preformed Enolates – Stereoselectivity and Transition-state Models
ditional aldol addition. The question of relative stereochemistry has been studied occasionally in the context of intramolecular, in particular transannular, aldolizations. There were, however, few diastereoselective variants. Control of enantioselectivity was achieved to a remarkable extent in the cyclization of 1,3-cyclopentanediones. Independent work by research groups at Hoffmann LaRoche and Schering AG in the early nineteen seventies revealed that highly enantioselective cyclization of triketones 20a, b can be accomplished by treatment with catalytic amounts of l-proline, as shown in Eq. (14) [35, 36]. Thus, the products 21a and 21b are obtained from the Hajos–Parrish–Eder–Sauer–Wiechert reaction, the intramolecular aldol condensation, in 93 and 99% ee, respectively. The method has been applied successfully to enantioselective steroid syntheses, and provided a route to the skeleton of several other natural products [37]. The source of stereoselectivity in this cyclization has been investigated carefully [38]. Very recently, proline catalysis has also been applied to enantioselective intermolecular aldol additions [39]. This promising approach will be discussed in detail in Chapter 4 of Part I. O N H
R
O
R
CO2H , DMF
O O
20a: R = Me 20b: R = Et
O
OH
21a: 93.4% ee 21b: 99.5% ee
ð14Þ Although the number of applications of the ‘‘traditional’’ aldol reaction ‘‘is legion’’, and despite its undoubted versatility, the reaction suffers from general lack of control of stereochemistry and from the difficulty of reliable determination of the carbonyl-active and CH-acidic components. Both problems have been solved by the technique of directed aldol addition based on preformed enolates.
1.3
The Aldol Addition of Preformed Enolates – Stereoselectivity and Transitionstate Models
The chemistry of preformed enolates emerged in temporal and causal coherence with the ‘‘LDA area’’. Although lithium and magnesium salts of diisopropylamine were first developed in the nineteen-fifties [40], lithium diisopropylamide (LDA) has been a widely used reagent since 1970, because of its behavior as a soluble, strong, and non-nucleophilic base [14]. LDA and related bases, for example lithium hexamethyldisilazane (LIHMDS) [41], lithium N-isopropylcyclohexylamide (LICA) [42], and lithium 2,2,6,6-
9
10
1 Fundamentals and Transition-state Models. Aldol Additions of Group 1 and 2 Enolates
tetramethylpiperidide (LITMP) [43] turned out to be the reagents of choice for conversion of a variety of carbonyl compounds into their enolates in an irreversible reaction which also enabled control of regiochemistry. This is illustrated in the kinetically controlled deprotonation of 2-methylcyclohexanone, 22, which leads to the formation of the enolate 23 with remarkable regioselectivity (Eq. (15)) [44]. Complementary routes that lead to the formation of the regioisomeric enolate 24 with a more substituted double bond have also been elaborated; they are based on a deprotonation under thermodynamic control or use of enol acetates, silyl enol ethers, or a,bunsaturated carbonyl compounds as precursors. In addition, procedures for formation of (E) and (Z) enolates were elaborated. The formation of preformed enolates has been reviewed comprehensively [45, 46]. In addition, the determination of enolate structures by crystal structure analyses, pioneered by the research groups of Seebach, Boche, and Williard, and NMR spectroscopic investigations and theoretical calculations led to insight into their reactivity [47]. O
22
LiN(iPr2), MeOCH2CH2OMe, -78°C
OLi
OLi +
23 99
24 :
1
ð15Þ Preformed enolates can be obtained not only from aldehydes and ketones, but also from carboxylic esters, amides, and the acids themselves. The corresponding carbonyl compound always acts irreversibly as the CH-acidic component. Thus, the term aldol reaction is no longer restricted to aldehydes and ketones but extended to all additions of preformed enolates to an aldehyde or a ketone. In contrast with the ‘‘traditional’’ aldol reaction, this novel approach is based on a three-step procedure (usually, however, performed as a one-pot reaction). First, the metal enolate 25 is generated irreversibly, with proton sources excluded, and, second, the compound serving as the carbonyl active, electrophilic component is added. The metal aldolate 26 thus formed is finally protonated, usually by addition of water or dilute acidic solutions, to give the aldol 27 (Scheme 1.4) [45, 46]. The principal aim in the development of the ‘‘modern’’ aldol reaction was stereochemical control, a field that has been treated in a series of review articles [46, 48–60]. In stereochemical terminology, the topic is discussed in the terms of ‘‘simple diastereoselectivity’’ and ‘‘induced stereoselectivity’’ [61]. Except for relatively rare examples when R1 is identical with R2 and R3 is identical with R 4 , all aldol additions are stereogenic. If the carbonyl-active compound is either an aldehyde (except formaldehyde – R 4 ¼ H) or a prochiral ketone (R 3 0 R 4 ), addition of the enolate leads to formation of either
1.3 The Aldol Addition of Preformed Enolates – Stereoselectivity and Transition-state Models
O R
1
R2
R1
a
α
O
M
C C
X
R2
H
X 25
O
M
O
O
R4
R3 b
R4
R3
X R1
R2
26
OH H3O c
R4
R3
O X
R2 R 27
1
R1, R2: H, alkyl, aryl, OR, NR2 R3, R4: H, alkyl X: H, alkyl, aryl, OR, NR2, OM Scheme 1.4
Aldol reaction of preformed enolates. (a) irreversible enolate formation; (b) addition of the preformed enolate to aldehydes or ketones; (c) protonation.
one or two stereogenic centers. This depends on whether an enolate with identical a-substituents (mostly R1 ¼ R2 ¼ H) or an enolate with different asubstituents is used. Under the latter conditions one of the substituents R1 and R2 is usually a hydrogen atom (Scheme 1.4). A general stereochemical pattern of the aldol addition is shown in Scheme 1.5. When a carbonyl compound 28 with an a-substituent R2 (which can be an alkyl or an aryl group, or a hetero substituent, for example alkoxy, or a protected amino group, but which is not identical with hydrogen) is converted into the ‘‘preformed’’ enolate 29 and added to an aldehyde, four stereoisomeric products 30a, 30b, 31a, 31b can result. When neither the enolate 29 nor the aldehyde contains stereogenic units, both reactants have enantiotopic faces and 30a and 30b are enantiomers. The same is true for the pair 31a and 31b. However, 30 and 31 form a pair of diastereomers. When an aldol addition leads to an excess of one of these diastereomers 30 or 31, it is said to exhibit simple diastereoselectivity. Several notations that assign descriptors to diastereomeric aldols are found in the literature. The classical erythro/threo nomenclature, which is based on Fischer projection formulas [62], will not be used in this chapter, because it can cause considerable confusion with branched carbon chains. Among the
11
12
1 Fundamentals and Transition-state Models. Aldol Additions of Group 1 and 2 Enolates
OH
O
OH R3
R1
R3
R1
R2 30b OH
R2 31a
O
OH R3
R1
O R3
R1
R2
R2
30a
31b R1CHO
R2 =/ H
O R2
O
CH2
C
O R2
CH
M
C R3
R3
28
29
R1CHO
OH
O
OH R3
R1
R2 = H
32a
O R3
R1 32b
Scheme 1.5
Stereochemical pattern of aldol addition.
different alternatives proposed in the literature, the Prelog–Seebach notation deserves mention: their l (like) and u (unlike) descriptors are systematic and unambiguous, because they correlate strictly with Cahn–Ingold–Prelog nomenclature [63]. For practical reasons, however, the syn/anti notation, introduced by Masamune [64], will be used in this chapter. Thus, the carbon chain that contains the two stereogenic centers is drawn in a zigzag fashion. In the syn diastereomers both substituents at the stereocenters are directed either toward or away from the viewer. In the anti isomers one of the substituents is directed toward the viewer, the other one away from the viewer, or vice versa. According to this notation the stereoisomers 30a and 30b are termed syn whereas 31a and 31b are defined as the anti isomers. When the topicity of an aldol addition is of interest the lk (like) and ul (unlike) notation [63] will be used in this chapter to describe the pathway by which the enolate approaches the carbonyl compound (aldehyde or ketone). The problem of simple diastereoselectivity does not arise in aldol additions when an a-unsubstituted enolate 29 (R2 ¼ H) or an enolate with two identical a-substituents reacts with an aldehyde or a prochiral ketone. The products 32a and 32b obtained from this combination are enantiomers, if neither the aldehyde nor the enolate is a chiral molecule.
1.3 The Aldol Addition of Preformed Enolates – Stereoselectivity and Transition-state Models
If an aldol addition is performed using either an enolate with stereogenic units, which can be located in the a-substituent R2 or in the ipso substituent R3 , or if a chiral aldehyde is used as the electrophilic component, the aldol products 30a, 31a, and 32a are diastereomers of 30b, 31b, and 32b. In these combinations not only is simple diasteroselectivity has to be achieved (except for the a-unsubstituted case leading to 32a/b) but also induced stereoselectivity. In detail, induced stereoselectivity is postulated for the following combinations of reactants: 1. reaction of chiral enolates with achiral or chiral aldehydes; 2. reaction of achiral enolates with chiral aldehydes; and 3. reaction of achiral enolates with achiral aldehydes, if they are mediated by use of a chiral catalyst (including enzymes or antibodies), chiral ligands at the metal M, or all kinds of chiral solvents. When, in reactions 1–3, the enolate does not have an a-substituent, e.g. 29 (R2 ¼ H), induced stereoselectivity is highly desirable. In addition, the corresponding reaction of a-substituted enolates 29 (R2 0 H) should not only provide induced stereoselectivity but also simple diastereoselectivity. In this chapter we will not use ‘‘induced diastereoselectivity’’ as a subdivision applicable to reactions 1 and 2 and ‘‘induced enantioselectivity’’ for reaction 3 (leading to enantiomeric aldol products), because, irrespective of the stereochemical relationship of the products (diastereomers or enantiomers), the transition states leading to the different stereoisomeric compounds are always diastereotopic, even if the products are enantiomers (reaction 3). The term ‘‘induced stereoselectivity’’, which includes the different variants 1–3, is therefore used here [57, 61]. Most aldol additions of preformed enolates are run under kinetic control. In some such kinetically controlled aldol reactions simple diastereoselectivity is related to the configuration of the enolate. The seminal investigations of Dubois [65], then intensive studies by the research groups of OM R2
R3
1. R1CHO 2. H3O
OH
R3
R1 R2
H (Z )-enolate
OM H
R3 R
O
syn aldol
1. R1CHO 2. H3O
OH
R3
R1 R2
2
(E )-enolate
O
anti aldol
Scheme 1.6
Correlation between enolate geometry and aldol configuration.
13
14
1 Fundamentals and Transition-state Models. Aldol Additions of Group 1 and 2 Enolates
House, Heathcock, and Ireland [48–51], revealed that (Z)-configured enolates furnish mainly syn-aldols whereas anti-b-hydrocarbonyl compounds arise predominantly from (E) enolates. In this context, the descriptors E and Z refer to the relative position of the a-substituent R2 and the oxygen–metal bond (Scheme 1.6). Because procedures for the selective generation of (Z) and (E) enolates have been elaborated for a variety of carbonyl compounds [45], the kinetically controlled aldol addition offers a solution to the problem of simple diastereoselectivity. Representative examples of the Z/syn and E/anti correlation are given in Eqs. (16) and (17) [66, 67].
OLi Me
OH
O
Ph
R
H (Z )-enolate
OH
1. PhCHO THF, -78°C
R
2. H3O
+
O
Ph
R Me
Me syn
anti
syn
R
: anti
98.7 : 1.3
CMe3 Et
90
: 10
ð16Þ OLi H
O
Ph
X Me
OH
1. PhCHO THF, -78°C
OH X
2. H3O
+
Ph
X
Me
Me
syn
(E )-enolate
O
anti
syn : anti
X OMe
62
:
38
OCMe3 Me
51
:
49
12
:
88
2
:
98
O Me Me3C O
Me
Me3C
ð17Þ
1.3 The Aldol Addition of Preformed Enolates – Stereoselectivity and Transition-state Models
As shown by Eq. (16), (Z) lithium ketone enolates yield syn aldols, if the substituent R at the carbonyl group is sterically demanding. Because carboxylic amides and thioamides, like ketones, form (Z) enolates predominantly, their aldol addition also leads to the predominant formation of syn-b-hydroxycarboxylic acids (or their corresponding derivatives). In general, Z-configured boron and titanium enolates result in higher simple diastereoselectivity in favor of syn aldols than the corresponding lithium or magnesium enolates. Also, with regard to the induced stereoselectivity boron enolates are usually more selective than lithium enolates [49, 52]. This might be because the boron–oxygen bond in enolates is shorter than the lithium–oxygen bond, so cyclic transition states involving boron as the metal are tighter, and steric repulsion is more effective and chiral information is transferred more efficiently (for chiral auxiliary groups or ligands). On the other hand, carboxylic esters and thioesters, which form predominantly (E) enolates, react with aldehydes with substantial anti selectivity. As shown in Eq. (18), this selectivity is, however, restricted to reactions in which bulky aromatic substituents form the alcoholic moiety of the ester. The anti diastereoselectivity of (E) enolates is usually lower then the syn selectivity of comparable (Z) enolates. One must also take into account the effect of the asubstituent. As shown in Eq. (18) the Z–syn correlation can be completely reversed for a-substituents that are bulky, sterically demanding alkyl groups [68]. OLi R
CMe3 H
1. Me3CCHO Et2O, 20°C 2. H3O
OH
O
OH
O
CMe3 + Me3C
Me3C
CMe3
R
R
syn
anti R
syn : anti 100 : 100 :
0
Et n-Pr
98 :
2
CHMe2
29 :
71
Me
CMe3
0
0
: 100
ð18Þ In the Mukaiyama addition of the aldol reaction [16], silyl ketene acetals or silyl enol ethers are added to aldehydes in a reaction mediated by Lewis acids or fluoride. Here again the Z–syn correlation is sometimes not observed [69, 70]. Thus, the Z–syn, E–anti correlation seems to be a rule with several exceptions [71]. The stereochemical outcome of the different aldol additions of preformed enolates calls for plausible transition state models. Two kinds of explanation seem suitable for rationalizing the different stereochemical results, which
15
16
1 Fundamentals and Transition-state Models. Aldol Additions of Group 1 and 2 Enolates
even seem to contradict each other: Thus, in a single type of transition state model a different substitution pattern might cause the reactants to have different orientations to each other so that formation of different stereoisomers results. On the other hand, different reaction conditions and reactants can be used, even if the way the aldol reaction is run is restricted to the use of preformed enolates. Thus, the latter might have very different counter-ions, and the solvents might also be different. It seems plausible that this can cause the reaction to occur via completely different types of transition state. The most widely accepted transition state hypothesis for aldol additions is the Zimmerman–Traxler model. This was originally developed to explain the stereochemical outcome of the Ivanoff reaction – addition of the dianion of carboxylic acids with magnesium counter-ions to aldehydes and ketones [72]. On the basis of investigation of the stereochemical outcome of the reaction of doubly deprotonated phenyl acetic acid to benzaldehyde (Eq. (19)), Zimmerman and Traxler proposed in a seminal paper a transition state model that involves a six-membered chair-like assembly of the reactants [73]. i-PrMgBr, Et2O
O Ph
OMgBr Ph
OH
OMgBr H
ð19Þ OH
OH
O
1. PhCHO Ph 2. H3O
OH Ph 69%
+
Ph
O OH
Ph 22%
This model offers a plausible explanation of the (Z)–syn, (E)–anti correlation, as shown in Scheme 1.7. The diasteromeric transition states 33a and 33b, which emerge from addition of a (Z) enolate to an aldehyde, differ in the position of the substituent R1 , which is equatorial in 33a and axial in 33b. By analogy with conformational analysis of the cyclohexane system [62], the transition state 33a is expected to have a lower energy than the diastereomeric alternative 33b. As a consequence the predominant formation of syn aldolates results from this kinetically controlled reaction. When the (E) enolate is chosen as the starting material, the analogous argument indicates the transition state 34a with R1 in an equatorial position to be favored compared with the alternative 34b, in which the substituent R1 occupies an axial position. Accordingly, the anti aldolate is expected to be the predominant product. Although first developed for a magnesium enolate, the Zimmerman– Traxler model could be used very successfully to explain the stereochemical
1.3 The Aldol Addition of Preformed Enolates – Stereoselectivity and Transition-state Models
R2 O R1
O
M
R1
OM R2
R1
H
OH O
H H
H
O
17
33a
R3
R1
H
R2
R3 syn aldolate
R3
O
syn aldol
R2 OM
H
R3 (Z )-enolaye H
R2
O
O
M
O
H
R1
R1 R1
H
R3
33b
O
M
R1 R
H H
OH O
H
O
R2 anti aldol
OH O
H
2
R3
R2
O R3
R1 R2
R3
anti aldol
anti aldolate
34a
R3
R3
OM H
R1
O
R1
anti aldolate
H O R1
OM R2
H
H OM
R2 R3
(E )-enolate
H H
O
O R1
M
O
H R1
R2 34b
OM H
H R1
R3
OH O
R2
R3 syn aldolate
Scheme 1.7
Zimmerman–Traxler transition state models in the aldol additions of (Z ) and (E ) enolates.
outcome of aldol additions of boron and titanium enolates. This might be because they are monomeric, in contrast with the enolates of lithium and magnesium, known to form aggregates. Not only is (Z)–syn [49, 52] and (E)–anti [74, 75] correlation better for boron enolates, they also usually result in greater induced stereoselectivity. This also is easily explained by the Zimmerman–Traxler model if it is assumed that for boron and titanium enolates, stronger Lewis acids than lithium and magnesium, the sixmembered transition state is tighter, so steric effects are maximized.
O R3
R1 R2 syn aldol
18
1 Fundamentals and Transition-state Models. Aldol Additions of Group 1 and 2 Enolates
The validity of the Zimmerman–Traxler model for alkali metal or magnesium enolates could be questioned, because these strongly electropositive metals might form ionic rather than covalent bonds to the enolate/aldolate oxygen atom. Even if there was a contact ion-pair of metal cation and oxygen anion, however, the geometry of a six-membered chair in the transition state would be very similar to that shown in Scheme 1.7. Even the aggregation of lithium enolates, well recognized today [47], does not severely contradict the Zimmerman–Traxler model – indeed, a six-membered transition state, postulated to occur at a tetrameric lithium pinacolone enolate [76], is very compatible with the ‘‘closed’’ model proposed by Zimmerman and Traxler. The Zimmerman–Traxler model has, however, been challenged by the frequent observation that (Z) enolates result in higher simple diastereoselectivity, giving syn aldols, compared with the lower anti selectivity of (E) enolates [49–51, 68]. Assuming the classical chair transition state, it has been remarked that for (E) enolates models 34a and 34b might both be plagued by unfavorable steric repulsion. Thus, the equatorial orientation of R1 in 34a avoids repulsion by R3 , but at the expense of a steric hindrance between R1 and R2 , which is enhanced because the torsional angle at the forming carbon–carbon bond is less than 60 . This has been postulated in skewed transition state models, proposed by Dubois [68] and Heathcock [51], in which the dihedral angle between the enolate double bond and the carbonyl group approaches 90 , as shown in Scheme 1.8 for the E–syn and E–anti correlation. The alternative, 34b, takes advantage of minimizing the R1 –R2 repulsion, but on the other hand, is disfavored by the axial R1 –R3 hindrance. As a result, both transition states 34a and 34b become similar in energy, so stereoselectivity is reduced. An important modification of the classical Zimmerman–Traxler model, which still relies on the idea of a ‘‘pericyclic-like’’ transition state, considers H R
O
M
1
O
R2 H
OH
R2
R3
O
H
anti
M O
R2
R3
R1
(E )-enolate H
O
R1
R3 (E )-enolate Scheme 1.8
Skewed transition state model for (E) enolates.
OH
O R3
R1 R2 syn
1.3 The Aldol Addition of Preformed Enolates – Stereoselectivity and Transition-state Models
R3 H
OH
O
O M
H
O R2
R3
R1 R2
R1
(Z )-enolate
syn
R3 R1
OH
O
O M
H
O R2
H
(Z )-enolate
R3
R1 R2 anti
Scheme 1.9
Boat transition state models for (Z ) enolates.
boat conformations as alternatives. Thus, Evans [49, 77] has suggested boat transition states when there is substantial steric hindrance between groups R1 and R2 on the forming carbon–carbon bond. The model plausibly explains the results given in Eq. (18), which show that an increase of the asubstituent R2 in a (Z) enolate leads to a higher proportion of the anti aldol. The alternative orientations outlined in Scheme 1.9 for the Z–syn and Z– anti correlation show the latter to be a reasonable alternative for large substituents R2 . Hoffmann, Cremer and co-workers have proposed a transition state model for addition of enol borates to aldehydes [78]. The authors pointed out that a twist-boat 36b could easily be formed from the U-conformation of the boron enolate (E)-35b whereas the intermediate with the W-orientation, (Z)-35a, is a suitable precursor of the chair-type transition state 36a. The consequence of the assumption that (Z) enolates react via a chair transition state whereas (E) enolates react via a boat conformation is that syn aldols are formed irrespective of enolate geometry, as shown in Scheme 1.10 [79]. This type of stereochemical outcome has been observed in various examples of the Mukaiyama-type aldol addition [80] and in aldolizations of enol stannanes and zirconium enolates [81, 82]. In contrast, a clear (Z)–syn, (E)–anti correlation has been observed in the addition of allylboronates to aldehydes [83], a reaction that is closely related to the aldol addition. The stereochemical hypothesis shown in Scheme 1.10 has been underscored by the semi-empirical calculations of Gennari and coworkers [84] which show that, starting from (Z) enolates, the half-chair transition state leading to syn aldols is preferred. For (E) enolates, a preference for either syn or anti aldols is predicted, depending on whether or not the metal carries a bulky substituent. The diminished simple diastereoselectivity in aldol additions of (E) enolates can be interpreted as a result of competition between the chair
19
20
1 Fundamentals and Transition-state Models. Aldol Additions of Group 1 and 2 Enolates
R3
R3 O 1
M
H
O R
H
R
M
O H
O
2
R1
35a
O R3
R1 R
M
R1
H H
R
36a
OH
O
2
2
H H R2
O R3
R1
M O O
R2
35b
R3 36b
Scheme 1.10
Different transition state models (chair and twist-boat) for (Z ) and (E ) enolates (M ¼ BL2 ).
and twist-boat transition states [85]. More recently, six-membered transition state hypotheses have also been proposed for ‘‘direct’’ aldol additions [86] and for the phosphoramide-catalyzed addition of trichlorosilyl enolates to aldehydes [87]. A different cyclic transition state model which does, however, not incorporate the metal, has been proposed by Mulzer and coworkers. It was developed to explain the observation that in the addition of doubly deprotonated phenyl acetic acid to pivaldehyde the highest anti selectivity is obtained with the most ‘‘naked’’ enolate anions (e.g. K/18-crown-6). The hypothesis, which might explain this stereochemical result, assumes that the approach of the enolate to the aldehyde is dominated by the interaction of the enolate HOMO and the p orbital of the aldehyde that functions as the LUMO. The favored approach of the reactants occurs when the substituents of the enolate (phenyl) and the aldehyde (t-butyl) are oriented in a trans orientation at the forming carbon bond, so that their mutual steric repulsion is minimized (Scheme 1.11). The expected transition state 37 has some similarity to that of a 1,3-dipolar cycloaddition, although the corresponding cycloadduct 38 does not form, because of the weakness of the oxygen–oxygen bond. Instead, the doubly metalated aldol adduct 39 results [88]. In a similar
1.3 The Aldol Addition of Preformed Enolates – Stereoselectivity and Transition-state Models
H Me3C
OH OM
CHO + Ph
O OH + Me3C
Me3C
OM
OH
Ph syn M
anti
:
syn
58 70 97
: : :
42 30 3
R1 O
H
O R1
H
LUMO
O
R2
H O M
H HOMO R2
R1 H
O M
M 38
R2
OM
OM OM
H
37
O OH
Ph anti
½ Mg Li K/18-crown-6
21
O 39
R1 = C(CH3)3; R2 = C6H5 Scheme 1.11
Anti selectivity in the aldol addition of doubly deprotonated phenylacetic acid and 1,3-dipolar cycloaddition transition state model.
way, Anh and Thanh emphasized that frontier orbital interactions played an essential role in determining the stereochemical outcome of the aldol reaction [89]. A completely different rationale for the stereochemical outcome of aldol additions relies on open-transition-state models. These involve antiperiplanar orientation of enolate and carbonyl group, in contrast with their syn-clinal conformation assumed in the six-membered cyclic transition states. Open-transition-state structures have been proposed to offer a rationale for those aldol additions that give predominantly syn products, irrespective of enolate geometry [90]. This outcome has been observed in aldol reactions of tin and zirconium enolates and of ‘‘naked’’ enolates generated from enolsilanes by treatment with tris(diethylamino)sulfonium difluoromethylsiliconate [70]. As shown in Scheme 1.12, the driving force for the
22
1 Fundamentals and Transition-state Models. Aldol Additions of Group 1 and 2 Enolates
O + R1
R2
OSiMe3 CH
(Et2N)3S
C
Me3SiF2
R3
H
Me3SiO
O
Me3SiO R3
R1
+
O R3
R1
R2
R2
syn
anti
enolate (Z ) : (E ) 99 : 9 :
1 91
product ratio syn : anti 95 94
: :
5 6
R1 = R3 = Ph; R2 = Me
δ− O R1
O R2
R3 H
O
H
δ−
O R2
H 41a (Z )
O δ−
δ−
δ− O R1 R1
R2 syn favored
O
R2 40b (E )
OH
R3
H
R3 R1
R2 anti disfavored
δ− O H
R1
R1
R3
40a (Z )
R3
δ− O H
OH
H
R3 H
R2
O δ−
41b (E )
Scheme 1.12
Formation of syn aldols irrespective of enolate geometry. Open-transition-state models.
open-transition-state model is the tendency of the negatively charged oxygen atoms to be as far apart from each other as possible. It is assumed that both transition states that lead to the formation of the anti aldol, i.e. 40a formed from the (Z) enolate and 40b from the (E) enolate, are disfavored, because of the steric repulsion of substituents R1 and R2 , which are oriented in a gauche conformation. This type of steric hindrance is avoided in the transition state structures 41a and 41b, so both (Z) and (E) enolates give the syn aldol predominantly. The basic assumption of open-chain transition-state models is the antiperiplanar orientation of the enolate and the carbonyl double bond. This
1.3 The Aldol Addition of Preformed Enolates – Stereoselectivity and Transition-state Models
H
C
H
H
O
Li +
O C C
H
H
C
H
Li O
O
C C
H
H
H
H 40
=/
Li O
O 106.9°
C H
H
O
C
H
41
O
C H
C H
Li
H
C C
H
H
H H 42
Scheme 1.13
Calculated reaction pathway for addition of acetaldehyde lithium enolate to formaldehyde.
type of model has also been used to explain the stereochemical outcome observed in aldol additions of thioester silylketene acetals [84]. An open transition has also been proposed in additions of silyl ketene acetals to aldehydes, mediated by chiral copper complexes [91]. Even if a particular enolate with a distinct geometry is reacted with an aldehyde, the question whether the transition state is ‘‘closed’’ or ‘‘open’’ cannot be answered by simple ‘‘either–or’’. More recent discussions have, instead, led to an ‘‘as well as’’, because the role of the counter-ion becomes more evident. Thus, ab-initio calculations of Houk and coworkers [92] predict an open-transition-state structure for metal-free, ‘‘naked’’ enolates and closed transition states for lithium enolates. For addition of acetaldehyde lithium enolate to formaldehyde, the lowest-energy reaction pathway (shown in Scheme 1.13) has been studied on the basis of on ab-initio (3–21 G) calculations [93]. The reactants first reach the coordination complex 40, a local minimum on the energy hypersurface [94]. In this complex the OaLiaO angle can vary from 145 to 180 . The transition state of carbon–carbon bond formation is calculated to have the half-chair conformation 41. The angle of nucleophilic attack on the carbonyl group is 106.9 , consistent with the Bu¨rgi–Dunitz trajectory [95] and in accordance with calculations of Houk and coworkers [92]. The transition state structure 41 finally collapses to the aldolate 42 with the lithium atom coordinating the two oxygen atoms. The activation barrier of the reaction is calculated to be 1.9 kcal mol1 and the overall exothermicity is 40.2 kcal mol1 . Concerning the question of the conformation of the six-membered cyclic transition state, the different possibilities, for example chair, half-chair, or
23
24
1 Fundamentals and Transition-state Models. Aldol Additions of Group 1 and 2 Enolates
twist boat, seem to be quite close in relative energy so the particular substitution pattern is assumed to determine the favored conformation. The key role of the counter-ion has been confirmed by experimental results obtained from the intramolecular aldol addition of bicyclic keto aldehydes. Here again, enolates with a strongly coordinating metal counter-ion, for example Mg 2þ , have strong preference for a reaction via a closed transition state in which the metal counter-ion is coordinated both to the enolate and to the carbonyl oxygen atom. ‘‘Naked’’ enolates, on the other hand, have a pronounced tendency to react through an open transition structure with an anti-periplanar conformation of the enolate and the carbonyl moiety [96]. It is self-evident that the transition state hypotheses discussed above are exclusively relevant to kinetically controlled aldol additions. Although this type of reaction control is the rule when preformed enolates are used, one should be aware that the reversibility of aldol additions cannot be excluded a priori and in any instance. In aldol reactions of preformed enolates, reversibility becomes noticeable in equilibration of syn aldolates with anti aldolates rather than in an overall low yield as found in the traditional aldol reaction. Considering the chair conformations of the syn and the anti aldolates, the former seem to be thermodynamically less stable, because of the axial position of the a-substituent R2 . This situation is avoided in the anti adduct (Eq. (20)). Indeed, the anti diastereoisomer is favored in most aldol additions run under thermodynamic control. This has been observed, for example, in aldolates syn-43 and anti-43, which arise from addition of doubly lithiated phenylacetic acid to pivalaldehyde. Whereas the kinetically controlled reaction gives a syn/anti ratio of 1.9:1, equilibration occurring after several hours in tetrahydrofuran at 25 C leads to a 1:49 in favor of the anti products (Eq. (21)) [88]. R2
O
O
M
R1
R
OLi CO2Li Ph syn-43
O
M
ð20Þ
R2
3
H
syn
Me3C
H
R1
H H
O
R
3
anti Ph
OLi
H
OLi +
Me3C
OLi CO2Li
Me3C CHO
Ph anti-43
ð21Þ The enolate counter-ion has an important effect on the rate of the reverse aldol reaction. Boron enolates usually undergo completely irreversible addition to aldehydes. The more ‘‘ionic’’ of the alkali metals, for example
1.4 Stereoselective Aldol Addition of Lithium, Magnesium and Sodium Enolates
sodium and potassium, have a greater tendency to undergo retro aldol reactions than lithium. Thus the potassium aldolate anti-44 formed from deprotonated ethyl mesityl ketone and benzaldehyde undergoes equilibration to syn-44 even at 78 C, whereas the corresponding lithium aldolate isomerizes at 0 C (Eq. (22)) [66]. That, in this reaction, the syn-aldolate is thermodynamically favored is possibly explained by the steric hindrance between the a substituent (methyl) and the bulky ipso substituent (mesityl) in the anti isomer. OM
O
Me
OM
Ph
O
Me
Ph Me Me syn-44
Me
Me Me
Me
anti-44
ð22Þ The influence of further counter-ions like ammonium, magnesium and zinc on the reversibility has been studied [65, 71]. Another influence comes from the stability of the enolate. As a rule, the rate of the retroaldol reaction correlates with the stability of the enolate. In stereoselective aldol addition, the reversibility is, in general, rather considered as a complication than a tool to obtain high selectivity. In particular, thermodynamically controlled aldol additions are usually not suitable to obtain non-racemic aldols.
1.4
Stereoselective Aldol Addition of Lithium, Magnesium and Sodium Enolates
Modern synthetic methods in organic chemistry are aimed at obtaining chiral products in a non-racemic, if at all possible, enantiomerically pure form. In addition, the products should be accessible as pure diastereomers. This section therefore focuses on aldol additions that provide pure stereoisomers. Amongst the enolate counter-ions of groups 1 and 2, only magnesium, sodium, and, particularly, lithium are important for this synthetic purpose. Although it should be remarked that most aldol additions leading to enantiomerically pure products rely on boron, tin, titanium, and zirconium enolates, topics that will be discussed in Chapters 1 and 3 of Part I of this book and Chapters 3–5 of Part II, there are also advantages of the more polar lithium and magnesium enolates. They are, in particular, highly reactive and can be added to aldehydes under mild conditions at low temperatures. Furthermore, their handling is easy, and they can be used on a large scale. As a consequence, a variety of useful aldol additions that rely on lithium and magnesium enolates have been developed and are applied fairly frequently.
25
26
1 Fundamentals and Transition-state Models. Aldol Additions of Group 1 and 2 Enolates
1.4.1
Addition of Chiral Enolates to Achiral Carbonyl Compounds a-Substituted Enolates A variety of carbohydrate-derived ketones have been converted into their corresponding lithium enolates and used as chiral nucleophiles in additions to aldehydes. Induced diastereoselectivity was, however, found to be moderate only. Chiral ketones, oxazolidinones, amides, and esters, on the other hand, performed amazingly well when used as boron, titanium, or tin enolates in aldol additions [49, 52, 55, 57]. The corresponding lithium enolates, however, resulted in substantially lower stereoselectivity. Interestingly, the lithium enolate generated from a-siloxy ketone 45 leads, stereoselectively, to the syn aldol 46a; the diastereomeric ratio (dr) exceeds 95:5, defined as the ratio of the major isomer to the sum of all other isomers. In contrast, the corresponding boron enolate furnishes the diastereomeric syn aldol 46b, which results from the opposite induced stereoselectivity (Scheme 1.14). The different behavior of the enolates is explained by a transition state model 48a with a chelated lithium counter-ion and a non-chelating boron atom in 48b. When ketone 45 is deprotonated by treatment with bromomagnesium tetramethylpiperidide, the anti diastereomer 47a is obtained in substantial excess relative to the minor product, the anti stereoisomer 47b. It turns out that the enolates with the different counter-ions lithium, boron, and magnesium are, in a sense, complementary. The anti selectivity of the magnesium enolate is rationalized by assuming that it has the (E) configuration (Scheme 1.14) [45, 97–100]. 1.4.1.1
Procedure: 6-Hydroxy-3-trimethylsilyloxy-4-alkanones 47a by Magnesiummediated Addition of (S)-5,5-Dimethyl-4-trimethylsiloxy-3-hexanone to Aldehydes [100]. An oven-dried 5-mL Wheaton vial is flushed with nitrogen and 2,2,6,6-tetramethylpiperidine (0.26 mL, 1.5 mmol), dry THF (0.5 mL) and ethylmagnesium bromide (1.2 m in THF, 1.16 mL, 1.4 mmol) are added. The vial is capped securely and heated with stirring at 70 C for 24 h. The resulting solution is cooled to 0 C, and (S)-5,5-dimethyl-4-trimethylsiloxy-3hexanone (0.10 mL, 0.08 g, 0.50 mmol) in THF (0.25 mL) is added over 30– 60 min with a syringe pump. The solution is stirred for 1.5 h at 0 C after addition is complete. The enolate solution is then cooled to 78 C and the aldehyde (2 mmol) is added dropwise. After 30 min the reaction is quenched by pouring the mixture into satd aq. NaHCO3 (5 mL). The layers are separated, and the aqueous phase is extracted with diethyl ether (5 10 mL). The combined organic layers are washed with cold HCl (1%, 10 mL) and satd aq. NaHCO3 (10 mL). After drying, the solution is concentrated to yield the product as a clear oil. Ratios of diastereomers are determined by integration of the relevant peaks in the 1 H NMR spectra of the crude products. Purification is accomplished by flash chromatography (diethyl
1.4 Stereoselective Aldol Addition of Lithium, Magnesium and Sodium Enolates
1. LiN(i-Pr)2/THF -78°C 2. TMEDA 3. RCHO
OH
O
R
d.r. > 95 : 5 Me3SiO 46a 1. Bu2BOTf/(i-Pr)2NEt 2. RCHO 3. H2O2, OH
O
OH R
d.r. > 95 : 5 Me3SiO
O
46b
Me3SiO
1.
NMgBr
45
OH
O 2. RCHO
R
d.r. > 92 : 8 Me3SiO 47a NMgBr
1.
O
2. HMPA/ClTi(Oi-Pr)3 3. RCHO
OH R
d.r. > 95 : 5 Me3SiO 47b SiMe3
Me3C H
H
H O Li O
46a
R Me 48a
Me3SiO
H
O
CMe3 H H BBu2 O O
46b
R Me 48b
Scheme 1.14
Stereodivergent aldol addition of (S )-5,5-dimethyl-4-(trimethylsilyloxy)-3-hexanone (45).
27
1 Fundamentals and Transition-state Models. Aldol Additions of Group 1 and 2 Enolates
28
ether:hexanes, 5:95). The products 47a are thus obtained: R ¼ i-Pr, 70%; R ¼ t-Bu, 80%; R ¼ Ph, 80%. Because the titanium enolate of the ketone 45 affords the stereoisomeric product 47b this completes a method of stereodivergent aldol addition. Starting from the identical chiral ketone 45 they lead to all of the different stereoisomeric products in a controlled manner [45]. The chiral a-benzoyloxyketone 49, accessible from mandelic acid, also reacts stereoselectively with aldehydes to give the syn aldols 50a/b. Both the lithium [101] and the titanium [102] enolates lead to the predominant formation of the diastereomer 50a. However, the stereoselectivity obtained by use of the titanium enolate surpasses that of the lithium analog (Eq. (23)). O O
Ph
1. LiN(i-Pr)2 2. ClTi(Oi-Pr)3 3. RCHO
O
O
1. LiN(i-Pr)2/THF 2. RCHO or
O Ph
O
O +
R OH
49
O
Ph
R OH
O
50a
50b
Enolate counterion
R
Li Li Ti Ti
Et Me2CH Et Me2CH
ratio 50a : 50b 96 96 97 97.7
: : : :
4 4 3 2.3
ð23Þ Remarkably high stereoselectivity is obtained by means of the sodium enolate of a-N,N-dibenzylamino-substituted ketone 51, a counter-ion not very frequently used in stereoselective aldol additions. In this instance, however, the sodium enolate turned out to be more efficient than the lithium analog. The predominant formation of the main diastereomeric product 52a rather than 52b is explained by an open transition state, assumed to be strongly favored over the cyclic transition state, when the more ‘‘ionic’’ sodium enolate is used rather than the corresponding lithium reagent (Eq. (24)) [103]. A large variety of propionic acid esters and higher homologs having a chiral alcohol moiety have been used in additions to aldehydes [56, 57]. It turned out, however, that the lithium enolates result in only moderate simple diastereoselectivity and induced stereoselectivity, in contrast with the corresponding boron, titanium, tin, or zirconium enolates and silyl ketene acetals, with which stereoselectivity is excellent. The same feature has been observed in enolates derived from chiral amides and oxazolidinones, as
1.4 Stereoselective Aldol Addition of Lithium, Magnesium and Sodium Enolates
1. LiN(i-Pr)2/THF or NaN(SiMe3)2
O R
O R Bn2N
51
OH
R
+
R'
2. R'CHO Bn2N
O
OH
R'
Bn2N 52a
52b
enolate counter ion
R
R'
Li Na
Me Me
Ph Ph
Li
CHMe2
Ph
63
: 11 : 6 : 37
Na
CHMe2
Ph
>95
: 5
ratio 52a : 52b 89 94
ð24Þ outlined in Chapter 2 and in Chapter 3 of Part I. The aldol additions of the chiral propanoate 53, generated from triphenylglycol, serve as an illustrative example. Whereas the lithium enolate 54 (M ¼ Li) gives the diastereomers 55a, b and 56a, b in a more or less stereo-random manner, acceptable simple diastereoselectivity in favor of the anti product combined with high induced stereoselectivity was obtained only after transmetalation of the lithium enolate into the zirconium species (Eq. (25)) [104, 105]. O Me
OM
Ph Me
OSiMe3
O Ph 53
Ph
Ph OSiMe3
O Ph
H
Ph
54
OH
OH
O
PhCHO Ph
OR*
+
OH OR*
+
ð25Þ
O
Ph
56a
OR* 56b
ratio enolate counterion anti-55 : syn-56 Li Cp2ZrCl
OR* 55b
O
Ph
O
Ph
55a OH
29
70 : 30 90 : 10
ratio 55a : 55b 68 : 32 >97 :
3
30
1 Fundamentals and Transition-state Models. Aldol Additions of Group 1 and 2 Enolates
The aldol reaction of chiral lactones, developed in the context of ‘‘selfreproduction of chirality’’ [106], takes advantage of the easy generation and high reactivity of lithium enolates. When the chiral cis dioxolanone 57, readily available from (S)-lactic acid and pivalaldehyde, is treated with LDA, the lactone enolate 58 is generated. Although the stereogenic center originating from lactic acid has vanished, because of enolate formation, the acetal carbon atom maintains the chiral information and the t-butyl residue directs the topicity in the addition to aldehydes and unsymmetrical ketones, so high stereoselectivity is achieved (Eq. (26)) [107]. H CMe3 LiN(i-Pr) 2 THF; -78°C O O H
O
57
Ph
O
O
H CMe3
O
H CMe3
Me
Ph
O
O O
OLi
HO
58
ð26Þ By analogy, a series of heterocyclic compounds 59 have been deprotonated to give the corresponding a-hetero-substituted cyclic enolates 60. On addition to aldehydes they are found to react with both high simple diastereoselectivity and induced stereoselectivity (Eq. (27)) [106–108]. H CMe3 X
Y
R
O
H CMe3 X
Y OLi
R
59
ð27Þ
60
X = O, NR', S; Y = O, NR'; R = H, Alkyl
The concept has also been extended to a six-membered homolog, the dioxanone 61, which furnishes the enolate 62 by deprotonation. Here again, subsequent aldol addition proceeds with high stereoselectivity and the diastereomer 63a results predominantly or almost exclusively (Eq. (28)) [109, 110]. With all heterocyclic enolates 58, 60, and 62 stereocontrol is relatively easily accomplished, because of the rigid structure of the heterocycle. Procedure: Aldol Addition of 2-tert-Butyl-6-methyl-one-1,3-dioxan-4-one to Propanal [110]. An ice-cold solution of (i-Pr)2 NH (11.13 mL, 79.4 mmol, 1.14 equiv.) in THF (160 mL) is treated with a solution of n-butyllithium in hexane (1.4 m, 53 mL, 79.4 mmol, 1.14 equiv.), kept at 0 C for 15 min, then cooled to 78 C. To this solution of LDA is added the dioxanone 61 (12.0 g, 69.7 mmol) in THF (80 mL) at such a rate that the temperature never ex-
1.4 Stereoselective Aldol Addition of Lithium, Magnesium and Sodium Enolates
CMe3 O
CMe3
LiN(i-Pr)2 THF; -78°C
O
RCHO
O
O
O
OLi
61
62
O
H
O
O
O
H
+
O
O R
ð28Þ
CMe3
CMe3
R
OH
OH 63b
63a
ceeds 70 C; the mixture is then maintained at 78 C for 45 min. To the resulting enolate solution are added (7.15 mL, 99 mmol, 1.42 equiv.) propanal in THF (80 mL), the temperature never being allowed to rise above 70 C. The reaction mixture is stirred at 78 C for 3 h then quenched at 78 C by the addition of satd aq. NH4 Cl (200 mL) then diethyl ether (200 mL). The two phases are separated, and the aqueous phase is extracted with diethyl ether (2 200 mL). The combined organic extracts are dried (MgSO4 ) and the volatile compounds removed by rotary evaporation and then with a high-vacuum pump. The crude product obtained, a 7:1 ratio of epimers at C(1 0 ), is (1 0 S,2R,5R,6R)-2-t-butyl-5-(1-hydroxypropyl)-6-methyl1,3-dioxan-4-one 63a (R ¼ Et), yield 9.6 g (60%). Efficient stereochemical control is also provided by the chiral lithium ketone enolate 64, addition of which to a variety of aldehydes leads to the formation of the corresponding b-hydroxy ketones 65, usually as single products (Eq. (29)) [111]. O
Ph
O
H
N
H
LiN(i-Pr)2 THF Ph
Tos
O
LiO H
N
H
Tos 64 HO O
RCHO
Ph
O
H
N
H
R H
Tos 65 R = CHMe2, (CH2)3Me, CH=C(Me)-CO2Et
ð29Þ
31
32
1 Fundamentals and Transition-state Models. Aldol Additions of Group 1 and 2 Enolates
The deprotonation of chiral iron acyl complexes, which can be obtained as enantiomerically pure compounds, leads to the corresponding enolates, as shown by the research groups of Davies and Liebeskind [112–115]. The lithium enolate 67a, however, which originates from propanoate 66a, reacts stereoselectively with aldehydes or ketones only if it has been transmetalated into the corresponding copper or aluminum enolate (Eq. (30)) [116]. PPh3 OC
n-BuLi THF, -78°C
Fe
R
PPh3 OC
Fe
Me
R = Me OLi
O 66a: R = Me 66b: R = OBn
67a
n-BuLi R = OBn THF, -78°C
ð30Þ
PPh3 OC
Fe
OBn O
67b
PPh3
O
Li
OC
OBn
Fe
40% O
OH
68
Stereoselective aldol addition to the lithium enolates themselves has been achieved by reaction of the deprotonated benzyloxy-substituted iron complex 66b and subsequent reaction with symmetrical ketones. The enolate involved in this procedure is assumed to exist as a chelated species 67b. The aldol 68 is obtained in a diastereomeric ratio higher than 99:1. The reaction is, nevertheless, plagued by low chemical yield, because of deprotonation of acetone. Because a symmetric ketone is used as an electrophile, the reaction leads to the formation of just one new stereogenic center [117, 118]. a-Unsubstituted Enolates When, instead of an a-substituted enolate 29 (R2 0 H), the a-unsubstituted enolate 29 (R2 ¼ H) is used in an aldol addition, the stereochemistry is, at first glance, simplified, as outlined in Scheme 1.5. Formation of the aldol products 32a and 32b shows that now only one new stereogenic center is formed. Nevertheless, aldol addition of a-unsubstituted chiral enolates (or achiral enolates, mediated by chiral ligands or additives) has been a problem, because of insufficient induced stereoselectivity [53]. In fact, using the same chiral auxiliary group R3 transition from an a-substituted to an aunsubstituted enolate is often accompanied by complete loss of the ability to discriminate between the enantiotopic faces of an aldehyde, so that more or less equal amounts of the stereoisomers 32a and 32b result (cf. Scheme 1.4.1.2
1.4 Stereoselective Aldol Addition of Lithium, Magnesium and Sodium Enolates
1.5). The problem occurs in aldol additions of methyl ketones and all kind of acetic acid derivative, esters, amides, and thioamides [53, 54]. In a pioneering investigation, the lithium enolate derived from 3-methyl2-pentanone was added to aldehydes. Only moderate diastereoselectivity was obtained, however [119]. Exceptionally high induced stereoselectivity was observed when camphor-derived ketone 69 was converted into the lithium enolathe and subsequently added to aldehydes. a-Cleavage at the carbonyl group enabled the formation of b-hydroxy aldehydes and acids in high enantiomeric excess (Eq. (31)) [60]. The work on the aldol addition of methyl ketones led to a variety of stereoselective variants which rely mainly on boron enolates and will be discussed in Chapter 3 of Part I of this book. On the other hand, the transition from lithium to boron enolates did not significantly improve the induced stereoselectivity of chiral acetamides [53]. Several highly stereoselective procedures based on tin and titanium enolates have been developed, however.
(31) Many attempts have been made to add chiral acetates to aldehydes or prochiral ketones, to obtain non-racemic b-hydroxycarboxylic esters. Here again, several variants based on boron and titanium enolates and on Mukaiyama aldol additions of silyl ketene acetals have been developed, and will be described in Chapter 2 (titanium enolates), Chapter 3 (boron enolates) and in Part II (Mukaiyama reaction). For enolates of group 1 and 2 elements the following fruitful approaches were elaborated. First, sulfinyl acetates 70 [120, 121], carrying their chiral information in the sulfoxide moiety were efficiently deprotonated with t-butylmagnesium bromide and added to aldehydes to give the aldol adducts 71. Removal of the sulfinyl residue is accomplished – in an immolative manner – by reduction with aluminum amalgam to furnish t-butyl b-hydroxycarboxylic esters 72. Remarkably, the method developed by Solladie´ and Mioskowski is not restricted to aldehydes as electrophilic components, but has been extended to prochiral ketones also (Scheme 1.15) [122]. The transition-state model 73, in which the magnesium atom is chelated by the enolate, sulfoxide, and carbonyl oxygen atoms, serves to explain the stereochemical outcome of the reaction. It is plausible that the aldehyde approaches the enolate from the side of the non-bonding electron pair of the sulfoxide (opposite to the aryl residue) and that the larger group R occupies a position anti to the sulfinyl substituent.
33
34
1 Fundamentals and Transition-state Models. Aldol Additions of Group 1 and 2 Enolates
1. t-BuMgBr THF, -78°C 2. O O Tol
O
S
OH R1 R2
R2
R1
O
OCMe3
OCMe3 S
O
Tol 70
71 OH
Al/Hg
O
R1
OCMe3
R2 72
Starting Material R1
R2
H
CH3
t-Butyl 3-Hydroxy Ester 72 e.e. (%)
Yield (%)
C7H15
86
80
C CC3H7
80
73
C CC6H13
70
53
C6H5
91
85
C7H15
95
88
C CC3H7
48
60
C CC6H13
36
72
8
80
C2H4OCOCH3
40
90
C6H5
68
75
CF3
20
75
COOC2H5
C6H5
L L Mg O O
70 Tol
S
O
RCHO Tol
S
L L Mg
O 71
O OCMe3
OCMe3 R
H 73 Scheme 1.15
Aldol addition of (R)-tolylsulfinylacetate 70 to aldehydes and prochiral ketones. Transition state model 73 (reaction of the magnesium enolate of 70 with RCHO).
1.4 Stereoselective Aldol Addition of Lithium, Magnesium and Sodium Enolates
Procedure: 3-Hydroxy carboxylic esters by addition of tert-butyl (B)-(R)-2-(4methylphenylsulfinyl)acetate to carbonyl compounds [123]. A solution of tBuMgBr (40 mL; prepared from 3 g Mg, 20 g t-BuBr, and 50 mL Et2 O) is added to a solution of sulfinyl ester 70 (1.5 g, 5.9 mmol) in THF (400 mL), at 78 C, over a period of 20 min, under argon. The mixture is then stirred for 30 min and the carbonyl compound (2 g) in THF (30 mL) is added. After 12 h at 78 C the mixture is hydrolyzed by addition of satd aq. NH4 Cl (50 mL) and extracted with CHCl3 (2 50 mL). The extract is dried with Na2 SO4 and concentrated. The residue, the b-hydroxy-a-sulfinyl ester, is diluted with THF (400 mL) and water (40 mL) and then treated with aluminum amalgam (4 5-g portions) while maintaining the temperature at 15–20 C. The solvent is evaporated and the residue, the b-hydroxy ester 72, is purified by column chromatography (silica gel; Et2 O–petroleum ether 20:80). The Solladie´ procedure has been successfully applied in a synthesis of maytansin [124]. In an analogous manner, chiral sulfinyl acetamides 70 (NMe2 instead of OCMe3 ) can be added to aldehydes and deliver b-hydroxy amides in high enantiomeric excess, again after reductive removal of the chiral auxiliary group [125]. More recently, the lithium enolate derived from the acetate 74 with axial chirality has been found to react with aldehydes in a highly stereoselective manner to give b-hydroxy esters 75 that can be converted into the corresponding carboxylic acids by alkaline hydrolysis (Eq. (32)) [126].
(32) Chiral acetyl iron complexes 76 also seem predestined to serve as reagents that enable introduction of a chiral acetate unit into aldehydes. In contrast with the benzyloxy-substituted derivative 66b (Eq. (30)), however, only marginal induced stereoselectivity is achieved when the lithium enolate of 76 is added to aldehydes, and the diastereomer 77a is formed in low preference compared with 77b (Eq. (33)). High diastereoselectivity is obtained only after transmetalation [112, 114, 115]. A significant improvement – as far as chiral lithium enolates of acetyl iron complexes are concerned – came from the complex 78, which carries a (pentafluorophenyl)diphenylphosphane ligand instead of the usual triphenylphosphane. Thus, the enolate 79, generated by treatment with LDA, gives the diastereomeric adducts 80a and 80b in a diastereomeric ratio of 98.5:1.5 on treatment with benzaldehyde. A donor–acceptor interaction between the enolate oxygen atom and the fluorinated aromatic ring, supported
35
36
1 Fundamentals and Transition-state Models. Aldol Additions of Group 1 and 2 Enolates
PPh3 OC
1. n-BuLi THF, -78°C
Fe
2. PhCHO O 76
ð33Þ PPh3 OC
PPh3
Fe
Ph O
+
OC
Fe
OH
O
77a d.r.
Ph OH
77b :
57
43
by spectroscopic studies, in the boat like transition state model 81 is assumed to be responsible for the observed lk-topicity (i.e. the (S)-enolate 79 approaches the aldehyde from its Si face) of the reaction (Scheme 1.16) [127]. Despite the elegance of the concept of Davies–Liebeskind enolates, one should be aware that preparation of the acyl iron complexes definitely needs resolution. It is somewhat typical that a series of procedures has been elaborated by using the racemic iron complexes [115]. It is highly desirable that chiral a-unsubstituted enolates should be available by simple methods from enantiomerically pure starting materials that are inexpensive and readily accessible in both enantiomeric forms. This postulate seems to be fulfilled to a reasonable extent by (R)- and (S)-2hydroxy-1,1,2-triphenylethyl acetate 83 (‘‘HYTRA’’) [53, 128, 129]. It is readily prepared from methyl mandelate which is first converted into triphenylglycol 82 and subsequently converted into the acetic ester 83 by treatment with acetyl chloride (Eq. (34)). Both enantiomers of the reagent are readily accessible, because both (R)- and (S)-mandelic acid are industrial products [130]. Diol 82 and acetate 83 are commercially available. PhMgBr Et2O, reflux
Ph HO
OMe
Ph OH
HO
77%
Ph
O (R)-methyl mandelate
Ph
82
ð34Þ
O Cl pyridine 92%
O
Ph O
OH
Ph Ph (R)-83
1.4 Stereoselective Aldol Addition of Lithium, Magnesium and Sodium Enolates
P(C6F5)(C6H5)2 OC
P(C6F5)(C6H5)2
LDA (2 equiv) THF; -42°C
Fe
OC
Fe
CH2
O
OLi
78
79 P(C6F5)(C6H5)2 OC
Fe
P(C6F5)(C6H5)2
C6H5 O
C6H5CHO THF; -78°C
+
Fe
OC
OH
C6H5 O
80a
OH
80b
F
F
F F
Ph Ph OC
F
P
O Fe Li O
H C6H5
81 Scheme 1.16
Diastereoselective aldol addition of lithiated (pentafluorophenyl)diphenyl-substituted acetyl iron complexes 78. Transition state model 81.
Double deprotonation of the chiral acetate (R)-83 by treatment with 2 equiv. LDA enables generation of the enolate 84. Remarkably, the dilithiated reagent 84 dissolves in THF whereas the ester 83 is fairly insoluble. Bridging of the oxygen anions by the lithium cations in the enolate 84 might explain the enhanced solubility. When the lithium enolate is added to aldehydes at 78 C, the diastereomeric aldol adducts 85a are formed predominantly, the ratio of diastereomers 85a:85b ranging between 10:1 and 12:1. Enhancement of the induced stereoselectivity can be accomplished by transmetalation to the corresponding magnesium enolate and by performing the addition to the aldehyde at lower temperatures (110 C to 135 C, using 2-methylbutane as co-solvent). Thus diastereomeric ratios up to 50:1 can be achieved. A single recrystallization of the crude product mixture
37
38
1 Fundamentals and Transition-state Models. Aldol Additions of Group 1 and 2 Enolates
O
2 LiN(i-Pr)2 THF; -78°C to 0°C
Ph OH
O Ph 83
Ph
O 84
Ph
Ph
OH
O
Ph
1. MX 2. RCHO
LiO OLi
O
R
OH OH +
Ph
R
O
Ph OH
O Ph
Ph
85a
Ph
Ph
85b
Ph OH
− HO
NaOH
Ph Ph 82 OH
O
R
OH 86
Scheme 1.17
Stereoselective aldol additions of the chiral acetate 83.
usually gives the major diastereomer 85a in the pure form. Mild alkaline hydrolysis of the aldol adducts 85 furnishes the b-hydroxycarboxylic acids 86 and triphenylglycol 82, which is easily separated and can be reused (Scheme 1.17) [131]. When the lithium enolate 84 is added to propenal (without transmetalation), the diastereomeric esters 87a and 87b are formed in the ratio 92:8. In this reaction the crude mixture 87a/87b was hydrolyzed to give the carboxylic acid (R)-88 in 83.5% ee. To obtain the enantiomerically pure 3-hydroxy4-pentenoic acid, enrichment was performed by single recrystallization of the ammonium salt, formed from (S)-1-phenylethylamine. When the amine has been liberated from the salt the carboxylic acid (R)-88 is obtained in >99.8% ee and 41% overall yield (Scheme 1.18) [132]. The (S) enantiomer, but not the (R) enantiomer, of 3-hydroxy-4-pentenoic acid 88 (both prepared according to this procedure) has been shown to be a substrate for the enzyme 3-hydroxybutanoate dehydrogenase – another example of the different biological activity of enantiomeric compounds [133]. Procedure: (R)-3-Hydroxy-4-pentenoic acid (88) by aldol addition of doubly deprotonated (R)-HYTRA (83) [132]. A 250-mL, two-necked, round-bottomed flask is equipped with a magnetic stirrer, a septum, and a connection to a combined vacuum and nitrogen line. The air in the flask is replaced by nitrogen and dry THF (100 mL) and diisopropylamine (37.7 mL, 0.264 mol)
1.4 Stereoselective Aldol Addition of Lithium, Magnesium and Sodium Enolates
1. 2 LiN(i-Pr)2 O 2. O
Ph
Ph 83 O
OH
H
OH
O
Ph
Ph
OH OH
O Ph
+
O
Ph OH
O Ph
Ph
Ph
87b
87a KOH MeOH, H2O
OH
O
Ph
OH OH
− HO
88 83.5% e.e.
Ph Ph 82 1.
NH2
Ph Me 2. recrystallization 3. NaOH
OH
O OH
88 99.8% e.e. Scheme 1.18
Synthesis of (R)-3-hydroxy-4-pentenoic acid 88 by stereoselective aldol addition of the chiral acetate (R)-83.
are injected via syringes via the septum. The mixture is cooled to 78 C and treated, while stirring, with a solution of n-butyllithium (15%, 168 mL, 0.269 mol) in hexane. The dry ice–acetone bath is replaced with an ice bath and stirring is continued for 30 min. A 2-L, three-necked, round-bottomed flask equipped with a mechanical stirrer, a septum, and a connection to a combined vacuum and nitrogen line is charged with (R)-83 (40.0 g, 0.120 mol). The air in the flask is replaced by nitrogen and dry THF (400 mL) is added through a cannula of 2 mm i.d., during which the flask is slightly evacuated. The suspension is stirred at 78 C in a dry ice–acetone bath. The ice-cold solution of LDA is added via a cannula, with vigorous stirring, during which the 2-L flask is slightly evacuated. The mixture is stirred at 0 C for 30 min to complete double de-
39
40
1 Fundamentals and Transition-state Models. Aldol Additions of Group 1 and 2 Enolates
protonation. A clear, orange solution forms. This is subsequently cooled to below 70 C (dry ice/acetone bath). The septum is removed cautiously (overpressure) and dry 2-methylbutane (900 mL) is poured into the flask (alternatively, a low-boiling (30–37 C) fraction of petroleum ether can be used) during which a vigorous stream of nitrogen is maintained. The flask is immediately closed with a septum and a thermocouple, connected to a resistance thermometer, is introduced via the septum. The reaction flask is plunged into a liquid-nitrogen bath, the depth of immersion being 2–3 cm. When the temperature of the suspension has reached 125 C, a solution of propenal (acrolein; 19.2 mL, 0.285 mol) in dry THF (30 mL) is added dropwise via a syringe through the septum at such a rate that the temperature does not exceed 120 C. Stirring is continued for 30 min at 120 to –125 C, during which time the yellowish color turns to pale blue. The mixture is treated with satd aq NH4 Cl (250 mL) and left to warm to r.t. The organic solvents are removed in vacuo. The precipitate in the aqueous suspension is separated by suction filtration, washed with several portions of water (total 400 mL), and transferred to a 4-L, round-bottomed flask equipped with a magnetic stirrer and a condenser. Methanol (2.4 L), water (1 L), and potassium hydroxide (72 g) are added, and the mixture is heated under reflux for 3 h. After cooling to r.t. the organic solvent is removed in vacuo. The residual aqueous alkaline suspension is shaken with 200-mL portions of CH2 Cl2 . The aqueous solution is transferred to a 2-L, roundbottomed flask, immersed in an ice bath, and acidified to pH 3 by cautious addition of hydrochloric acid (6 mol L1 ); the mixture is stirred vigorously with a magnetic stirrer and the pH is controlled carefully in order to avoid over-acidification. The clear solution is saturated with NaCl and extracted with ethyl acetate (8 200 mL), during which the pH of the aqueous layer is monitored and, if necessary, readjusted to pH 3 by the addition of hydrochloric acid (6 mol L1 ). The combined organic layers are dried with MgSO4 , concentrated, and the oily residue is distilled under reduced pressure in a short-path distillation apparatus to afford the colorless acid 88; yield 8.32 g (59.6%); b.p. 69 C/0.04 Torr (5.3 Pa); [a]D 17 21.7 (c ¼ 1.95% aq. ethanol); 83.5% ee. A solution of the acid (8.32 g, 0.072 mol; 83.5% ee) in dry diethyl ether (300 mL) at r.t. is placed in a 500-mL, round-bottomed flask equipped with a magnetic stirrer. ()-(S)-1-Phenylethylamine (20 mL, 0.157 mol) is added in one portion with vigorous stirring. A white precipitate forms immediately and the flask is closed with a drying tube filled with calcium chloride. After stirring for 30 min at 25 C the precipitate is separated by suction filtration and washed with ice-cold diethyl ether (2 50-mL). Recrystallization from dry THF (240 mL) affords 13.80 g of a colorless salt, m.p. 127 C; [a]D 20 9.7 (c ¼ 1.998, deionized water). The salt is treated with aq. sodium hydroxide (2%, 400 mL) and the mixture is washed with CHCl3 (3 70 mL). The acidified aqueous solution is extracted with ethyl acetate (as described above) and the combined organic extract is dried with MgSO4 and con-
1.4 Stereoselective Aldol Addition of Lithium, Magnesium and Sodium Enolates
centrated. To remove remaining traces of solvent the flask containing the product is connected via a short, curved glass tube to a two-necked, liquidnitrogen-cooled flask, which is connected to an efficient oil pump; yield 5.77 g (69.4%, 41.4% relative to (R)-2-hydroxy-1,2,2-triphenylethyl acetate); [a]D 17 26 (c ¼ 0.996, 95% aqueous ethanol); >99.8% ee (determined by 1 H NMR measurement of the methyl ester in the presence of Eu(hfc)3 , no signals of the (S) enantiomer are detected). Since the first report of stereoselective aldol additions of the chiral acetate 83, the reagent has been applied frequently in syntheses of natural products and biologically active compounds. Among these are g-amino-b-hydroxybutanoic acid (‘‘GABOB’’) [134], the enantiomeric naphthoquinones shikonin and alkannin [135], d- and l-digitoxose [136], desoxy and aminodesoxy furanosides [132], detoxinine [137], tetrahydrolipstatin and related pancreatic lipase inhibitors [138], statin [139] and statin analogs [140], compactin and mevinolin [141], fluoroolefin peptide isoesters [142], the HMG-CoA synthase inhibitor F-(244) [143], epothilone A [144], the A-ring building block of 1a,25-dihydroxyvitamin D3 [145], intermediates for (23S)-hydroxyvitamin D3 derivatives [146], building blocks of lankacidin C [147], the synthetic statin NK-104 [148], the C1aC9 segment of bryostatin [149], the C20aC34 segment of the immunosuppressant FK-506 [150], and pyranoyl steroids having hypocholesterolemic properties [151]. Selected examples are shown in Scheme 1.19. Furthermore, a large variety of synthetic inhibitors of HMG-CoA reductase have been synthesized by including the HYTRA aldol procedure as one of the key steps [152–158]. The enzyme is responsible for reduction of hydroxymethylglutaryl CoA to mevalonic acid, a key step in cholesterol biosynthesis. HMG CoA reductase inhibitors contain a b,ddihydroxycarboxylic ester or carboxylate moiety or the corresponding dlactone. Several of these compounds, which can be regarded as synthetic analogs of compactin and mevinolin, have found their way to the marketplace, because of their hypocholesterolemic activity. Selected examples of the structures of these drugs are given in Scheme 1.20. As in the previous scheme, the stereogenic center generated by aldol addition of the chiral acetate 83 is marked with an asterisk. The (R)-configured reagent 83 always attacks the aldehyde predominantly from the Re side, the (S) acetate 83 correspondingly from the Si side. Thus, there is a predictable lk topicity in HYTRA aldol additions (Scheme 1.21). It has been reported that the induced stereoselectivity in aldol additions of the chiral lactate 83 can be improved by using an excess of base (LDA or lithium hexamethyldisilazane) in the deprotonation step [159]. 1.4.2
Addition of Achiral Enolates to Chiral Carbonyl Compounds
In a chiral aldehyde or ketone the two carbonyl faces are diastereotopic and the products resulting from either Re or Si face attack of the enolate are
41
42
1 Fundamentals and Transition-state Models. Aldol Additions of Group 1 and 2 Enolates
HO
O
HO
O
OH H3N
COO
*
* HO
O OH (R)-Shikonin
(R)-GABOB
OH
H N
* HO
O
O
* H
O OH (S)-Alkannin
O
O
OH HCO NH C11H23
OH
O *
*
H Tetrahydrolipstatin
Detoxinine
O
O NH3
HN
OCMe3
HN
OH
* OH
O
OH
R
CO2
OH O R = C6H11, Ph Statine analogs
epi-N-Boc-statine
O
*
OH
*
N-Boc-statine
OH O
O
OCMe3
*
CH2Ph
H O
pyroGluPheN
O LeuMetNH2
F R R = H: Compactin R = Me: Mevinolin Scheme 1.19
Natural products and biologically active compounds synthesized by use of the HYTRA aldol method.
Fluoroolefin peptide mimic
1.4 Stereoselective Aldol Addition of Lithium, Magnesium and Sodium Enolates
43
O S *
HO
O
OH
N
O
O
O
HMG-CoA synthase inhibitor
*
O OH Epothilone A
OR' *
R
*
CHCO2R
Me3CMe2SiO
O
O
OSiMe2CMe3 OR''
Vitamin D3 A-ring building block
23-Hydroxy vitamin D3 building blocks
Scheme 1.19 (continued)
diastereomers. The question of the stereochemistry of nucleophilic addition to chiral aldehydes or ketones has been addressed by the seminal studies of Cram and co-workers [160–162]. Indeed, the stereochemical outcome of this type of reaction is best rationalized by either the ‘‘Cram–Felkin–Anh model’’ [163] or ‘‘Cram’s cyclic model’’ when the carbonyl group is substituted by ether or amino residues. The latter type of stereochemical result has also been termed ‘‘chelation control’’, the former type of reaction accordingly as ‘‘non chelation control’’ [164]. Most of these investigations have been performed on racemic substrates. In view of the tendency towards enantiomerically pure products, emphasis is given here to those procedures that start from non-racemic aldehydes or ketones. In the aldol reaction ‘‘chelation control’’ is usually provided by those variants that use strong Lewis acidic enolate metals, for example boron, titanium, and tin. In particular, ‘‘chelation control’’ results very frequently in Mukaiyama aldol additions to a-oxygen- and a-nitrogen-substituted aldehydes [165]. Lithium enolates, in contrast, either give predominantly the product predicted by the ‘‘Cram–Felkin–Anh model’’ or react more or less nonstereoselectively. Thus, the favored formation of the syn-aldol product in the reaction of 2-phenylpropanal with the lithium enolates of acetone, pinacolone, methyl acetate, or N,N-dimethylacetamide is in accordance with Cram’s rule or the Felkin–Anh model (Eq. (35)). However, a rather moderate syn:anti ratio of 3:1 is typical of this type of reaction [51, 67].
44
1 Fundamentals and Transition-state Models. Aldol Additions of Group 1 and 2 Enolates
HO
F
O O
*
H
F
OH
OH
O
* N
OCMe3 F
N F ref. [141]
ref. [152]
OH
OH
CO2H
CO2Na
*
N
HO *
O
OH
O
N
F ref. [154]
ref. [153]
HO
HO
O *
O O
O
O
*
F
N R
H
H
R N
OH
N N Ph
HO
R
CONHPh
ref. [155]
ref. [157]
ref. [156]
R
R
OH *
N
N
R
R ref. [158] Scheme 1.20
Hypocholesterolemic-active drugs (HMGCoA reductase inhibitors) prepared by use of the HYTRA aldol method (selected examples).
*
OH CO2H
O
1.4 Stereoselective Aldol Addition of Lithium, Magnesium and Sodium Enolates
O
Ph
Ph OH
O
HO
Ph Ph (R)-83
MO MO
Ph Ph
O
Ph
O R
Si
O
O Ph (S)-83
Ph
Re
45
Ph Ph
OM OM
Ph
O
H
(R)-84
(S)-84
Scheme 1.21
Lk-topicity in aldol additions of (R) and (S ) acetate 83.
H
Ph
R
R
+ Ph
+ OLi
O
OH
O
OH
syn
O
anti 25
:
75
R
Ph
ð35Þ When the a-substituted (E) enolate 89 is added to 2-phenylpropanal, control of simple diastereoselectivity is provided in as far as the products with the 2,3-anti configuration result exclusively. Induced stereoselectivity is lower, however, as indicated by the 80:20 ratio of diastereomeric b-hydroxy esters 90a and 90b (Eq. (36)) [51]. OLi + Ph
CHO 89
O
Ph OH
+
O 90a 80
O
Ph OH
:
O 90b 20
ð36Þ
46
1 Fundamentals and Transition-state Models. Aldol Additions of Group 1 and 2 Enolates
A single diastereomer 93, however, results from addition of the lithium enolate 92 derived of t-butyl thiopropanoate to the chiral, enantiomerically pure aldehyde 91. The transformation is a key carbon-chain-elongation step in Woodward’s synthesis of erythromycin A (Eq. (37)) [166]. Somewhat lower diastereoselectivity is observed in the aldol reaction between the lithium enolate 95 and the chiral aldehyde 94, a transformation used in a synthesis of maytansin (Eq. (38)). The diastereomeric adducts 96a and 96b result in a ratio of 90:10 [167].
H MeO
O
O
O
O
OAc
O
O
SCMe3
+
OLi 91
92
ð37Þ SCMe3 MeO
O
O
O
O
OAc
O
OH
O
93
O
H
O
Me3SiO
SLi +
H
SEt
94
O
95
H
OH
S
O SEt
Me3SiO 96a
+
:
H
OH
S SEt
Me3SiO 96b
ð38Þ A variety of a-alkoxy-substituted aldehydes have been submitted to aldol addition of lithium enolates. ‘‘Cram–Felkin–Anh’’ selectivity is usually observed, although often with rather low stereoselectivity. Exceptionally high diastereoselectivity results from the aldol reaction between the lithium enolate of pinacolone and isopropylidene glyceraldehyde. Thus, the b-hydroxy ketone 97 is obtained as a single product (Eq. (39)). Distinctly lower selectivity is observed when the same aldehyde is submitted to aldol additions of ester enolates, however [168].
1.4 Stereoselective Aldol Addition of Lithium, Magnesium and Sodium Enolates
O
O
CMe3
O
O
+
H
CMe3
OLi O
OH
O
97
ð39Þ The N-dibenzyl protecting group has been developed as a tool to provide non-chelate-controlled additions to a-amino aldehydes. Thus, anticonfigured aldol adducts are obtained predominantly when a-N-dibenzylprotected aldehydes 98 are submitted to aldol additions of lithium enolates as shown in Eqs. (40) and (41) [169, 170]. O R1
OLi R2
+
H
OMe R2
(PhCH2)2N 98 OH
O
1
R
OH OMe
(PhCH2)2N
R
+
R2 R 2
OMe
(PhCH2)2N
ð40Þ
R 2 R2 syn
anti
R1
R2
diastereomeric ratio anti : syn
yield
Me
H
95 : 5 90 : 10
82
97 :
84
PhCH2
H
Me
Me
(PhCH2)2N
O
1
83
3
O OLi H
+ OMe
O
O
(PhCH2)2N
(PhCH2)2N OMe OH
82%
d. r.:
>96
OMe
+
:
OH
<4
ð41Þ
47
48
1 Fundamentals and Transition-state Models. Aldol Additions of Group 1 and 2 Enolates
Further selected examples of diastereoselective aldol reactions between lithium enolates and chiral aldehydes are given in Eqs. (42) [171], (43) [172], and (44) [173]. In the last example, the salt-free generation of the lithium enolate was occasionally found to be crucial to stereoselectivity [174]. Me3CMe2SiO
O
OLi +
H
CMe3
Me3CMe2SiO
OH
Me3CMe2SiO
O CMe3
d. r.:
OH
O
+
CMe3
:
88
12
ð42Þ OR PhCH2 CH O 2 N H
OLi +
O
O
OR
OR
PhCH2 CH OH 2 N
O
PhCH2 O
CH2
OH
O
N
+
O
O
O
d. r.:
:
70
30
ð43Þ O H PhCH2O
H
OLi
H
OCMe3
+
O
87%
O
O OCMe3 PhCH2O d. r.:
OH 82
OCMe3
+ PhCH2O
O :
OH
O
18
ð44Þ
1.4 Stereoselective Aldol Addition of Lithium, Magnesium and Sodium Enolates
1.4.3
Addition of Chiral Enolates to Chiral Carbonyl Compounds
If a chiral aldehyde reacts with an achiral enolate the induced stereoselectivity is determined by the ‘‘inherent’’ preference of the aldehyde to be attacked from its Re or Si face. If, however, a chiral aldehyde is combined with a chiral enolate one must consider whether the inherent selectivities of the two reagents will be consonant in one of the combinations (‘‘matched pair’’), but dissonant in the other combination (‘‘mismatched pair’’). Thus, different diastereoselectivity results from each combinations. The problem of insufficient stereoselectivity in the ‘‘mismatched’’ combination can be solved by means of highly efficient chiral enolates which can ‘‘outplay’’ the inherent selectivity of the aldehyde. The concept has been applied extensively in the context of boron enolates, a topic that has been reviewed comprehensively [52] and is discussed in detail in Chapter 3 of Part I of this book. The principle of ‘‘enolate controlled’’ stereochemistry can be demonstrated by use of the chiral acetate 83. When doubly deprotonated (R)- and (S)-HYTRA 83 reacts with enantiomerically pure 3-benzyloxybutanal 99 the (R)-configured acetate enolate attacks the aldehyde 99 (irrespective of its chirality) predominantly from the Re face so that, after hydrolysis, anti hydroxycarboxylic acid 100a results. On the other hand, the (S)-configured enolate of 83 attacks the enantiomerically pure aldehyde preferentially from the Si side to give syn carboxylic acids 100b with comparable selectivity, as shown in Scheme 1.22 [175]. In addition to this example of ‘‘acyclic’’ stereocontrol, the concept has also been applied to the cyclic chiral lithium enolate 101; this also resulted in high diastereoselectivity when the enantiomeric enolates were combined with the chiral aldehydes 102. As demonstrated by Eqs. (45) and (46), here again the stereochemical outcome is determined by the configuration of the enolate 101 [176].
Me N
OLi H
+
Me3C N
O
Bz
ð45Þ
(R)-101 Me O
N Me3C N H
H
OBz
49
50
1 Fundamentals and Transition-state Models. Aldol Additions of Group 1 and 2 Enolates
O
Ph OH
O Ph
Ph
(R)-83 1. 2 LiN(i-Pr)2, THF, MgI2 2. PhCH2O O H
–125°C
99 3. KOH/MeOH, H2O
anti : syn :
:
90 PhCH2O
OH
10
O
PhCH2O
OH
O
+ OH
OH
anti-100a anti : syn :
syn-100b :
5
95
1. 2 LiN(i-Pr)2, THF, MgI2 2. PhCH2O O H 99 3. KOH/MeOH, H2O O
Ph OH
O Ph (S)-83 Scheme 1.22
‘‘Enolate controlled’’ addition of doubly deprotonated (R) and (S ) acetate 83 to (R)benzyloxybutanal.
Ph
–125°C
1.4 Stereoselective Aldol Addition of Lithium, Magnesium and Sodium Enolates
Me N
OLi H
+
Me3C N
O
Bz
ð46Þ
(S)-101 Me O
N Me3C N H
H
OBz
1.4.4
Addition of Achiral Enolates to Achiral Carbonyl Compounds in the Presence of Chiral Additives and Catalysts
Combination of achiral enolates with achiral aldehydes mediated by chiral ligands at the enolate counter-ion opens another route to non-racemic aldol adducts. Again, this concept has been extremely fruitful for boron, tin, titanium, zirconium and other metal enolates. It has, however not been applied very frequently to alkaline and earth alkaline metals. The main, inherent, drawback in the use of these metals is that the reaction of the corresponding enolate, which is not complexed by the chiral ligand, competes with that of the complexed enolate. Because the former reaction pathway inevitably leads to formation of the racemic product, the chiral ligand must be applied in at least stoichiometric amounts. Thus, any catalytic variant is excluded per se. Among the few approaches based on lithium enolates, early work revealed that the aldol addition of a variety of lithium enolates in the presence of (S,S)-1,4-(bisdimethylamino)-2,3-dimethoxy butane or (S,S)-1,2,3,4tetramethoxybutane provides only moderate induced stereoselectivity, typical ee values being 20% [177]. Chelation of the ketone enolate 104 by the chiral lithium amide 103 is more efficient – the b-hydroxyl ketone syn-105 is obtained in 68% ee and no anti adduct is formed (Eq. (47)) [178]. Ph
O + CMe3
OMe N
Me2CH
+ LiN(i-Pr)2 Li
103
ð47Þ OLi CMe3 104
OH
O
PhCHO Ph
CMe3
105 92%, e.e.: 68%
51
52
1 Fundamentals and Transition-state Models. Aldol Additions of Group 1 and 2 Enolates
A variety of other chiral lithium amides, for example 106 and 108, have been applied more recently to bring about enantioselective aldol additions. As shown in Eqs. (48) [179] and (49) [180], both simple diastereoselectivity and induced stereroselectivity can be induced by these reagents. In the latter reaction, the enolate itself becomes chiral, because of desymmetrization of ketone 107 on deprotonation. Ph O LiN(i-Pr)2
+
N
+
O
N
OCMe3
Li O 106 OAc
OAc
O
1. PhCHO Ph
2. Ac2O
+
OCMe3
ð48Þ O
Ph
anti (76%) e.e.: 94%
OCMe3 syn (7%)
O Me O
O
Me
CMe3
+
Ph
+
N
LiCl
Li
107
108 CHO
95%
ð49Þ OH
H
O
O
O
Me
CMe3
single diastereomer e.e.: 90%
1.5
Conclusion
In a period longer than a century the aldol addition has proven itself to be an extremely useful ‘‘work horse’’ in organic synthesis. During the long history of this reaction the preformed-enolate technique was a breakthrough
References
enabling particular stereoselectivity to be achieved. Although boron and titanium become increasingly favored as counter-ions, lithium and magnesium enolates found their place in the repertoire of organic chemistry. The high reactivity of these reagents combined with easy handling has made them a useful tool in the hands of synthetic chemists.
References 1 A. T. Nielsen, W. J. Houlihan, Organic Reactions 1968, Vol.
16. 2 H. O. House, Modern Synthetic Reactions, 2nd ed., W. A.
Benjamin, Menlo Park, 1972. 3 C. H. Heathcock in Comprehensive Organic Synthesis, Vol. 2
(Ed.: B. M. Trost), Pergamon, Oxford 1991, Chapter 1.5. 4 R. Kane, J. Prakt. Chem. 1838, 15, 129. 5 J. G. Schmidt, Ber. Dtsch. Chem. Ges. 1880, 13, 2342; 1881, 14,
1459. 6 L. Claisen, A. Clapare`de, Ber. Dtsch. Chem. Ges. 1881, 14,
349. 7 ‘‘. . . dasselbe ist zugleich Aldehyd und Alkohol, . . . es ist der
8
9
10
11 12
13
14 15 16 17 18
erste Aldehyd eines Glycols’’: W. Wurtz, Ber. Dtsch. Chem. Ges. 1872, 5, 326. For the thermochemistry of the aldol reaction, see: J. P. Guthrie, Can. J. Chem. 1974, 52, 2037; 1978, 56, 962; E. M. Arnett, F. J. Fisher, M. A. Nichols, A. A. Ribeiro, J. Am. Chem. Soc. 1989, 111, 748; J. P. Richard, R. W. Nagorski, J. Am. Chem. Soc. 1999, 121, 4763. In the case of non-coordinating counter ions, the formation of the aldolate anion has been shown to be endothermic; cf. R. Noyori, I. Nishida, J. Sakata, M. Nishizawa, J. Am. Chem. Soc. 1980, 102, 1223. V. Grignard, A. Vesterman, Bull. Soc. Chim. Fr. 1925, 37, 425; C. Weizmann, S. F. Garrard, J. Chem. Soc. 1920, 117, 324. M. Ha¨usermann, Helv. Chim. Acta 1951, 34, 1482. J. B. Conant, N. Tuttle in R. Amus, Organische Synthesen, Vieweg u. Sohn, Braunschweig 1937, p. 192; cf. Organikum, Wiley–VCH, Weinheim, 21nd ed.; 2001, p. 522. For more recent applications of solid basic metal salts as catalysts in aldol reactions, see: J. F. Sanz, J. Oviedo, A. Ma´rquez, J. A. Odriozola, M. Montes, Angew. Chem. Int. Ed. Engl. 1999, 38, 506; G. Zhang, H. Hattori, K. Tanabe, Bull. Chem. Soc. Jap. 1989, 62, 2070; K. Tanabe, G. Zhang, H. Hattori, Appl. Catalysis 1989, 48, 63; G. Zhang, H. Hattori, K. Tanabe, Appl. Catalysis 1988, 36, 189. G. Wittig, Top. Curr. Chem. 1976, 67, 1. G. Wittig, H. Reiff, Angew. Chem. Int. Ed. Engl. 1968, 7, 7. T. Mukaiyama, Organic Reactions 1982, 28, 203. A. Russell, R. L. Kenyon, Org. Synth. Coll. Vol. III, 1955, 747. C. R. Conard, M. A. Dolliver, Org. Synth. Coll. Vol. II, 1943, 167.
53
54
1 Fundamentals and Transition-state Models. Aldol Additions of Group 1 and 2 Enolates 19 J. G. Leuck, L. Cejka, Org. Synth. Coll. Vol. I, 1944, 283. 20 E. P. Kohler, H. M. Chadwell, Org. Synth. Coll. Vol. I, 1944, 21 22 23 24 25 26 27 28 29 30
31 32 33 34 35 36 37
38 39
40 41 42 43 44 45 46 47
78. G. Kabas, Tetrahedron 1966, 22, 1213. M. E. Jung, Tetrahedron 1976, 32, 3. R. E. Gawley, Synthesis 1976, 777. R. B. Woodward, F. Sondheimer, D. Taub, K. Heusler, W. M. McLamore, J. Am. Chem. Soc. 1952, 74, 4223. ¨ chi, B. Gubler, R. S. Schneider, J. Wild, J. Am. G. Bu Chem. Soc. 1967, 89, 2776. G. I. Poos, W. F. Johns, L. H. Sarett, J. Am. Chem. Soc. 1955, 77, 1026. J. A. Marshall, A. E. Greene, J. Org. Chem. 1972, 37, 982. T.-L. Ho, Synth. Commun. 1974, 4, 265 and references given therein. W. S. Johnson, J. J. Korst, R. A. Clement, J. Dutta, J. Am. Chem. Soc. 1960, 82, 614. For a short survey, see: J. Mulzer, H.-J. Altenbach, M. Braun, K. Krohn, H.-U. Reissig, Organic Synthesis Highlights, VCH, Weinheim 1991, 232. J. N. Collie, J. Chem. Soc. 1907, 91, 1806. T. M. Harris, C. M. Harris, Tetrahedron 1977, 33, 2159. S. G. Gilbreath, C. M. Harris, T. M. Harris, J. Am. Chem. Soc. 1988, 110, 6172. G. Bringmann, Tetrahedron Lett. 1982, 23, 2009; G. Bringmann, J. R. Jansen, Tetrahedron Lett. 1984, 25, 2537. Z. G. Hajos, D. R. Parrish, J. Org. Chem. 1974, 39, 1615; Org. Synth. 1985, 63, 26. U. Eder, G. Sauer, R. Wiechert, Angew. Chem. Int. Ed. Engl. 1971, 10, 496. G. Sauer, U. Eder, G. Haffer, G. Neef, R. Wiechert, Angew. Chem. Int. Ed. Engl. 1975, 14, 417; P. Buchschacher, ¨ rst, Org. Synth. 1985, 63, 37. A. Fu C. Agami, C. Puchot, H. Sevestre, Tetrahedron Lett. 1986, 27, 1501; C. Agami, Bull. Soc. Chim. Fr. 1988, 499. B. List, R. A. Lerner, C. F. Barbas III, J. Am. Chem. Soc. 2000, 122, 2395; A. B. Northrup, D. W. C. MacMillan, J. Am. Chem. Soc. 2002, 124, 6798. F. C. Frostick, Jr., C. R. Hauser, J. Am. Chem. Soc. 1949, 71, 1350; M. Hammell, R. Levine, J. Org. Chem. 1950, 15, 162. M. W. Rathke, J. Am. Chem. Soc. 1970, 92, 3222; C. R. ¨ ger, E. G. Rochow, J. Organomet. Chem. 1964, 1, 476. Kru M. W. Rathke, A. Lindert, J. Am. Chem. Soc. 1971, 93, 2318. R. A. Olofson, C. M. Dougherty, J. Am. Chem. Soc. 1973, 95, 581, 582. H. O. House, M. Gall, H. D. Olmstead, J. Org. Chem. 1971, 36, 2361. C. H. Heathcock in Modern Synthetic Methods 1992, (Ed.: R. Scheffold), VHCA, VCH, Basel, Weinheim 1992, 1. C. H. Heathcock in Comprehensive Organic Synthesis, Vol. 2 (Ed.: B. Trost), Pergamon, Oxford 1993, Chapter 1.6. For comprehensive reviews, see: D. Seebach, Angew. Chem. Int. Ed. Engl. 1988, 27, 1624; C. Lambert, P. v. R. Schleyer in Houben Weyl, Methoden der Organischen Chemie, Vol. E 19d
References
48 49 50
51 52 53 54 55
56 57
58 59 60 61
62
63 64 65
66 67
68
(Ed.: M. Hanack), Thieme, Stuttgart 1993, p. 75; L. M. Jackman, J. Bortiatynski in Advances in Carbanion Chemistry, Vol. 1 (Ed.: V. Snieckus), JAI Press, Greenwich, Connecticut 1992, p. 45; P. G. Williard in Comprehensive Organic Synthesis, Vol. 1 (Ed.: B. M. Trost), Pergamon, Oxford 1991, Chap. 1.1. C. H. Heathcock, Science 1981, 214, 395. D. A. Evans, J. V. Nelson, T. R. Taber, Top. Stereochem. 1982, 13, 1. C. H. Heathcock, in Comprehensive Carbanion Chemistry, Part B (Eds.: E. Buncel, T. Durst), Elsevier, Amsterdam 1984, Chap. 4. C. H. Heathcock, in Asymmetric Synthesis Vol. 3, Part B (Ed.: J. D. Morrison), Academic Press, New York 1984, Chap. 2. S. Masamune, W. Choy, J. S. Petersen, L. R. Sita, Angew. Chem. Int. Ed. Engl. 1985, 24, 1. M. Braun, Angew. Chem. Int. Ed. Engl. 1987, 26, 24. M. Braun in Advances in Carbanion Chemistry, Vol. 1 (Ed.: V. Snieckus), JAI Press, Greenwich, Connecticut 1992, p. 177. B. M. Kim, S. F. Willians, S. Masamune in Comprehensive Organic Synthesis, Vol. 2 (Ed.: B. M. Trost), Pergamon, Oxford 1993, Chap. 1.7; M. W. Rathke, P. Weipert, ibid., Chap. 1.8.; I. Paterson, ibid., Chap. 1.9; C. Gennari, ibid., Chap. 2.4. M. Braun, H. Sacha, J. Prakt. Chem. 1993, 335, 653. M. Braun in Houben Weyl, Methoden der Organischen Chemie, Vol. E21b (Eds.: G. Helmchen, R. W. Hoffmann, J. Mulzer, E. Schaumann), Thieme, Stuttgart 1996 p. 1603. R. Mahrwald, Chem. Rev. 1999, 99, 1097. M. Sawamura, Y. Ito in Catalytic Asymmetric Synthesis (Ed.: I. Ojima), VCH, Weinheim 1993, chapter 7.2. C. Palomo, M. Oiarbide, J. M. Garcı´a, Chem. Eur. J. 2002, 8, 37; Chem. Soc. Rev. 2004, 33, 65. The stereochemical notation follows that proposed in the Houben–Weyl edition on ‘‘Stereoselective Synthesis’’, cf. G. Helmchen in Houben–Weyl, Methoden der Organischen Chemie, Vol. E21a (Eds.: G. Helmchen, R. W. Hoffmann, J. Mulzer, E. Schaumann), Thieme, Stuttgart 1996, p. 1. See textbooks on stereochemistry: e.g.: E. L. Eliel, S. H. Wiley, L. N. Mander, Stereochemistry of Organic Compounds, Wiley, New York 1994. D. Seebach, V. Prelog, Angew. Chem. Int. Ed. Engl. 1982, 21, 654. S. Masamune, S. A. Ali, D. L. Snitman, D. S. Garvey, Angew. Chem. Int. Ed. Engl. 1980, 19, 557. J. E. Dubois, M. Dubois, Tetrahedron Lett. 1967, 4215; J. Chem. Soc., Chem. Commun. 1968, 1567; Bull. Soc. Chim. Fr. 1969, 3120, 3553; J. E. Dubois, P. Fellmann, C. R. Acad. Sci. Se´r. C 1972, 274, 1307; Tetrahedron Lett. 1975, 1225. C. H. Heathcock, C. T. Buse, W. A. Kleschick, M. C. Pirrung, J. E. Sohn, J. Lampe, J. Org. Chem. 1980, 45, 1066. C. H. Heathcock, M. C. Pirrung, J. Org. Chem. 1980, 45, 1727; C. H. Heathcock, M. C. Pirrung, S. H. Montgomery, J. Lampe, Tetrahedron 1981, 37, 4087. P. Fellmann, J.-E. Dubois, Tetrahedron 1978, 34, 1349.
55
56
1 Fundamentals and Transition-state Models. Aldol Additions of Group 1 and 2 Enolates 69 T. H. Chan, T. Aida, P. W. K. Lau, V. Gorys, D. N. Harpp,
Tetrahedron Lett. 1979, 4029. 70 R. Noyori, I. Nishida, J. Sakata, J. Am. Chem. Soc. 1981,
103, 2106. 71 See, for example, the stereochemical outcome of aldol addition
72 73 74 75 76
77 78 79
80
81 82 83 84 85 86 87 88
89 90 91
92
performed with the lithium enolate of cyclohexanone, which definitely has (E) configuration, H. O. House, D. S. Crumrine, A. Y. Teranishi, H. D. Olmstead, J. Am. Chem. Soc. 1973, 95, 3310; M. Majewski, D. M. Gleave, Tetrahedron Lett. 1989, 42, 5681. D. Ivanoff, A. Spassoff, Bull. Soc. Chim. Fr. 1931, 49, 371; D. Ivanoff, N. Nicoloff, Bull. Soc. Chim. Fr. 1932, 51, 1325. H. E. Zimmerman, M. D. Traxler, J. Am. Chem. Soc. 1957, 79, 1920. S. Masamune, T. Sato, B. M. Kim, T. Wollmann, J. Am. Chem. Soc. 1986, 108, 8279. E. J. Corey, S. S. Kim, J. Am. Chem. Soc. 1990, 112, 4976. R. Armstutz, W. B. Schweizer, D. Seebach, J. D. Dunitz, Helv. Chim. Acta 1981, 64, 2617; E. Juaristi, A. K. Beck, J. Hansen, T. Matt, T. Mukhopadhyay, M. Simson, D. Seebach, Synthesis 1993, 1271. D. A. Evans, L. R. McGee, Tetrahedron Lett. 1980, 25, 3975. R. W. Hoffmann, K. Ditrich, S. Froech, D. Cremer, Tetrahedron 1985, 41, 5517. R. W. Hoffmann, K. Ditrich, Tetrahedron Lett. 1984, 25, 1781; C. Gennari, L. Colombo, C. Scolastico, R. Todeschini, Tetrahedron 1984, 40, 4051. R. Noyori, S. Murata, M. Suzuki, Tetrahedron 1981, 37, 3899; T. Mukaiyama, S. Kobayashi, M. Tamura, Y. Sagawa, Chem. Lett. 1987, 491; E. Nakamura, M. Shimizu, I. Kuwajima, J. Sakata, K. Yokoyama, R. Noyori, J. Org. Chem. 1983, 48, 932. S. S. Labadie, J. K. Stille, Tetrahedron 1984, 40, 2329. D. A. Evans, L. R. McGee, J. Am. Chem. Soc. 1981, 103, 2876; T. Katuski, M. Yamaguchi, Tetrahedron Lett. 1985, 26, 5807. R. W. Hoffmann, Pure Appl. Chem. 1988, 60, 123 and references given therein. C. Gennari, R. Todeschini, M. G. Baretta, G. Favini, C. Scolastico, J. Org. Chem. 1986, 51, 612. I. Kuwajima, E. Nakamura, Acc. Chem. Res. 1985, 18, 181. R. Mahrwald, B. Ziemer, Tetrahedron Lett. 2002, 43, 4459. S. E. Denmark, X. Su, Y. Nishigaichi, J. Am. Chem. Soc. 1998, 120, 12990. ¨ ntrup, J. Finke, M. Zippel, J. Am. Chem. J. Mulzer, G. Bru ¨ntrup, J. Soc. 1979, 101, 7723; J. Mulzer, M. Zippel, G. Bru Senger, J. Finke, Liebigs Ann. Chem. 1980, 1108. N. T. Anh, B. T. Thanh, Nouv. J. Chim. 1986, 10, 681. Y. Yamamoto, K. Maruyama, Tetrahedron Lett. 1980, 21, 4607. D. A. Evans, M. C. Kozlowski, J. A. Murry, C. S. Burgey, K. R. Campos, B. T. Connell, R. J. Staples, J. Am. Chem. Soc. 1999, 121, 669. Y. Li, M. N. Paddon-Row, K. Houk, J. Org. Chem. 1990, 55, 481.
References 93 R. Leung-Toung, T. T. Tidwell, J. Am. Chem. Soc. 1990, 112,
1042. 94 Based on calculations, a similar coordination of the lithium
95
96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115
116
cation has been postulated previously, cf. E. Kaufmann, P. v. R. Schleyer, K. N. Houk, Y. D. Wu, J. Am. Chem. Soc. 1985, 107, 5560; S. M. Bachrach, A. Streitwieser, Jr., J. Am. Chem. Soc. 1986, 108, 3946; G. Stork, R. L. Polt, Y. Li, K. N. Houk, J. Am. Chem. Soc. 1988, 110, 8360; S. M. Bachrach, J. P. Ritchie, J. Am. Chem. Soc. 1989, 111, 3134; E. Kaufmann, S. Sieber, P. v. R. Schleyer, J. Am. Chem. Soc. 1989, 111, 4005; A. E. Dorigo, K. Morokuma, J. Am. Chem. Soc. 1989, 111, 4635; see also ref. 92. ¨rgi, E. Shefter, J. D. Dunitz, Tetrahedron 1975, 31, H. B. Bu ¨ rgi, J. D. Dunitz, E. Shefter, J. Am. Chem. 3089; H. B. Bu Soc. 1973, 95, 5065. S. E. Denmark, B. R. Henke, J. Am. Chem. Soc. 1991, 113, 2177. C. H. Heathcock, C. T. White, J. J. Morrison, D. VanDerveer, J. Org. Chem. 1981, 46, 1296. C. H. Heathcock, C. T. White, J. Am. Chem. Soc. 1979, 101, 7076. C. H. Heathcock, S. Arseniyadis, Tetrahedron Lett. 1985, 26, 6009. N. A. Van Draanen, S. Arseniyadis, M. T. Crimmins, C. H. Heathcock, J. Org. Chem. 1991, 56, 2499. A. Choudhury, E. Thornton, Tetrahedron 1992, 48, 5701. A. Choudhury, E. Thornton, Tetrahedron Lett. 1993, 34, 2221. J. B. Goh, B. R. Lagu, J. Wurster, D. C. Liotta, Tetrahedron Lett. 1994, 35, 6029. M. Braun, H. Sacha, Angew. Chem. Int. Ed. Engl. 1991, 30, 1318. ¨ller, M. Braun, Chem. Ber. 1994, 127, H. Sacha, D. Waldmu 1959. D. Seebach, A. R. Sting, M. Hoffmann, Angew. Chem. Int. Ed. Engl. 1996, 35, 2708. D. Seebach, R. Naef, G. Calderari, Tetrahedron 1984, 40, 1313. D. Seebach, T. Weber, Helv. Chim. Acta 1984, 67, 1650. W. Amberg, D. Seebach, Chem. Ber. 1990, 123, 2413. D. Seebach, J.-M. Lapierre, W. Jaworek, P. Seiler, Helv. Chim. Acta 1993, 76, 459. I. Hoppe, D. Hoppe, R. Herbst-Irmer, E. Egert, Tetrahedron Lett. 1990, 31, 6859. S. G. Davies, I. M. Dordor, P. Warner, J. Chem. Soc., Chem. Commun. 1984, 956. S. G. Davies, Pure Appl. Chem. 1988, 60, 13. L. S. Liebeskind, M. E. Welker, Tetrahedron Lett. 1984, 25, 4341. J. S. McCallum, L. S. Liebeskind in Houben–Weyl, Methoden der Organischen Chemie, Vol. E21b (Eds.: G. Helmchen, R. W. Hoffmann, J. Mulzer, E. Schaumann), Thieme, Stuttgart 1996, p. 1667. P. W. Ambler, S. G. Davies, Tetrahedron Lett. 1985, 26, 2129.
57
58
1 Fundamentals and Transition-state Models. Aldol Additions of Group 1 and 2 Enolates 117 S. G. Davies, M. Wills, J. Organomet. Chem. 1987, 328, C 29. 118 S. G. Davies, D. Middlemiss, A. Naylor, M. Wills,
Tetrahedron Lett. 1989, 27, 2971. 119 D. Seebach, V. Ehrig, M. Teschner, Liebigs Ann. Chem.
1976, 1357. 120 C. Mioskowski, G. Solladie´, J. Chem. Soc., Chem. Commun.
1977, 162. 121 For reviews, see: G. Solladie´ in Asymmetric Synthesis Vol. 2,
122 123
124 125
126 127 128 129 130
131 132 133 134 135 136 137 138
139
Part A (Ed.: J. D. Morrison), Academic Press, New York 1983, p. 184. C. Mioskowski, G. Solladie´, Tetrahedron 1980, 36, 227. G. Solladie´ in Houben Weyl, Methoden der Organischen Chemie, Vol. E21b (Eds.: G. Helmchen, R. W. Hoffmann, J. Mulzer, E. Schaumann), Thieme, Stuttgart 1996, p. 1808. E. J. Corey, L. O. Weigel, A. R. Chamberlin, H. Cho, D. H. Hua, J. Am. Chem. Soc. 1980, 102, 6613. R. Annunziata, M. Cinquini, F. Cozzi, F. Montanari, A. Restelli, J. Chem. Soc., Chem. Commun. 1983, 1138; Tetrahedron 1984, 40, 3815; for stereoselective aldol additions of 2-(arylsulfinyl)phenyl ketones, see: S. Nakamura, M. Oda, H. Yasuda, T. Toru, Tetrahedron 2001, 57, 8469. S. S. Keito, K. Hatanaka, T. Kano, H. Yamamoto, Angew. Chem. Int. Ed. 1998, 37, 3378. I. Ojima, H. B. Kwon, J. Am. Chem. Soc. 1988, 110, 5617. M. Braun, R. Devant, Tetrahedron Lett. 1984, 25, 5031. R. Devant, U. Mahler, M. Braun, Chem. Ber. 1988, 121, 397. M. Braun, S. Gra¨f, S. Herzog, Org. Synth. 1993, 72, 32. For an alternative acylation of 82, see: J. Macor, A. J. Sampognaro, P. R. Verhoest, R. A. Mack, Org. Synth. 2000, 77, 45; for a modified procedure of the preparation of 82, see: A. Millar, L. W. Mulder, K. E. Mennen, C. W. Palmer, Organic Preparations and Procedures Int. 1991, 23, 173; Chem. Abstr. 1991, 114, 163667. M. Braun, S. Gra¨f, Org. Synth. 1993, 72, 38. S. Gra¨f, M. Braun, Liebigs Ann. Chem. 1993, 1091. M. Hashmi, S. Gra¨f, M. Braun, M. W. Anders, Chem. Res. Toxicol. 1996, 9, 361. ¨ller, Synthesis 1989, 856. M. Braun, D. Waldmu M. Braun, C. Bauer, Liebigs Ann. Chem. 1991, 1157. M. Braun, J. Moritz, Synlett 1991, 750. W. R. Ewing, B. D. Harris, K. L. Bhat, M. M. Joullie´, Tetrahedron 1986, 42, 2421. P. Barbier, F. Schneider, U. Widmer, Helv. Chim. Acta 1987, 70, 1412; Eur. Patent 185359, 1986; P. Barbier, F. Schneider, U. Widmer, Hoffmann–La Roche and Co. AG; Chem. Abstr. 1987, 106, 102077; Eur. Patent 189577, 1986; Chem. Abstr. 1987, 106, 196249; US Patent 4931463, 1990; P. Barbier, F. Schneider, U. Widmer, Hoffmann–La Roche, Inc.; Chem. Abstr. 1991, 114, 82542; Eur. Patent 444482, 1991; R. Derunges, H. P. Maerki, H. Stalder, A. Szente, Hoffmann–La Roche AG; Chem. Abstr., 1992, 117, 7786. P. G. M. Wuts, S. R. Putt, Synthesis 1989, 951.
References 140 R. Devant, H. E. Radunz, Tetrahedron Lett. 1988, 2307;
141
142
143 144
145 146 147 148
149 150 151
152
153
154
German Patent 3743225, 1989; R. M. Devant, H. E. Radunz, Merck GmbH; Chem. Abstr. 1990, 112, 36458. J. E. Lynch, R. P. Volante, J. V. Wattley, I. Shinkai, Tetrahedron Lett. 1987, 28, 1385; Eur. Patent 251714, 1988; R. P. Volante, E. Corley, I. Shinkai, Merck and Co., Inc.; Chem. Abstr. 1988, 108, 150455; US Patent 4611081, 1986; J. E. Lynch, I. Shinkai, R. P. Volante, Merck and Co., Inc.; Chem. Abstr. 1987, 106, 18119. ¨ hler, Tetrahedron T. Allmendinger, E. Felder, E. Hungerbu Lett. 1990, 31, 7301; Eur. Patent 353732, 1990; T. ¨hler, R. Lattmann, S. Ofner, Allmendinger, E. Hungerbu W. Schilling, G. von Sprecher, E. Felder, Ciba–Geigy AG; Chem. Abstr. 1990, 113, 153046. S. Wattanasin, H. D. Do, N. Bhongle, F. G. Kathawala, J. Org. Chem. 1993, 58, 1610. D. Schinzer, A. Bauer, O. M. Bohm, A. Limberg, M. Cordes, Chem. Eur. J. 1999, 5, 2483; Int. Patent 9959985, 1999; K.-H. Altmann, A. Bauer, D. Schinzer; Novartis AG; Chem. Abstr. 2000, 132, 3284. K. Nagasawa, H. Ishihara, Y. Zako, I. Shimizu, J. Org. Chem. 1993, 58, 2523. Jap. Patent 08301811, 1996; S. Ri, M. Yamanashi, N. Shimizu; Kuraray Co; Chem. Abstr. 1997, 126, 131697. C. T. Brain, A. Chen, A. Nelson, N. Tanikkul, E. J. Thomas, Tetrahedron Lett. 2001, 42, 1247. M. Suzuki, Y. Yanagawa, H. Iwasaki, H. Kanda, K. Yanagihara, H. Matsumoto, Y. Ohara, Y. Yazaki, R. Sakoda, Bioorg. Med. Chem. Lett. 1999, 9, 2977. J. M. Weiss, H. M. R. Hoffmann, Tetrahedron: Asymmetry 1997, 8, 3913. S. Mills, R. Desmond, R. A. Reamer, R. P. Volante, I. Shinkai, Tetrahedron Lett. 1988, 29, 281. US Patent 5216015, 1993; D. G. McGarry, F. A. Volz, J. R. Regan, M. N. Chang; Rohne–Poulenc Rorer Pharmaceuticals Inc.; Chem. Abstr. 1993, 119, 226236. H. Jendralla, E. Baader, W. Bartmann, G. Beck, A. Bergmann, E. Granzer, B. v. Kerekjarto, K. Kesseler, R. Krause, W. Schubert, G. Wess, J. Med. Chem. 1990, 33, 61; H. Jendralla, E. Granzer, B. v. Kerekjarto, R. Krause, U. Schacht, E. Baader, W. Bartmann, G. Beck. A. Bergmann, K. Kesseler, G. Wess, L.-J. Chen, S. Granata, J. Herchen, ¨ ssler, K. Wagner, J. Med. Chem. 1991, H. Kleine, H. Schu 34, 2962; German Patent 3722807, 1989; G. Wess, W. Bartmann, G. Beck, E. Granzer, Hoechst AG; Chem. Abstr. 1989, 110, 231121; Eur. Patent 324347, 1989; E. Baader, H. Jendralla, B. Kerekjarto, G. Beck, Hoechst AG; Chem. Abstr. 1990, 112, 21003; German Patent 3826814, 1990; G. Beck, W. Bartmann, G. Wess, E. Granzer, Hoechst AG; Chem. Abstr. 1991, 114, 23976. O. Tempkin, S. Abel, C.-P. Chen, R. Underwood, K. Prasad, K.-M. Chen, O. Repic, T. J. Blacklock, Tetrahedron 1997, 53, 10659. D. V. Patel, R. J. Schmidt, E. M. Gordon, J. Org. Chem.
59
60
1 Fundamentals and Transition-state Models. Aldol Additions of Group 1 and 2 Enolates
155
156
157 158
159 160 161 162
163 164 165
166
167 168
1992, 57, 7143; German Patent 3805801, 1988; J. J. Wright, S. Y. Sit, Bristol–Myers Co.; Chem. Abstr. 1989, 110, 114836. B. D. Roth, C. J. Blankley, A. W. Chucholowski, E. Ferguson, M. L. Hoefle, D. F. Ortwine, R. S. Newton, C. S. Sekerke, D. R. Sliskovic, C. D. Stratton, M. M. Wilson, J. Med. Chem. 1991, 34, 357; Eur. Patent 409281, 1991; B. D. Roth, Warner–Lambert Co.; Chem. Abstr. 1991, 115, 29107; see also: German Patent 3932887, 1990; N. S. Watson, C. Chan, B. C. Ross, Glaxo Group Ltd.; Chem. Abstr. 1991, 114, 164567. For a synthesis of the [14C] side chain-labeled compound, see: T. H. Lee, P. W. K. Woo, J. Labelled Compounds and Radiopharmaceuticals 1999, 42, 129. – For a review, see: B. D. Roth, Progress in Med. Chem. 2002, 40, 1. D. R. Sliskovic, C. J. Blankley, B. R. Krause, R. S. Newton, J. A. Picard, W. H. Roark, B. D. Roth, C. Sekerke, M. K. Shaw, R. L. Stanfield, J. Med. Chem. 1992, 35, 2095. Eur. Patent 424929, 1991; H. Natsugari, H. Ikeda, Takeda Chemical Industries, Ltd.; Chem. Abstr. 1991, 115, 114373. Int. Patent, 1991; M. Matsuo, T. Manabe, H. Okumura, H. Matsuda, N. Fujii, Fujisawa Pharmaceutical Co. Ltd; Chem. Abstr. 1992, 116, 151782. K. Prasad, K. M. Chen, O. Repic, G. E. Hardtmann, Tetrahedron: Asymmetry 1990, 1, 703. D. J. Cram, F. A. Abd Elhafez, J. Am. Chem. Soc. 1952, 74, 5828. D. J. Cram, D. R. Wilson, J. Am. Chem. Soc. 1963, 85, 1245. For a discussion, see: E. L. Eliel in Asymmetric Synthesis, J. D. Morrison, Ed., Vol. 2, Part A, p. 125, Academic, New York 1983; J. Mulzer, H.-J. Altenbach, M. Braun, K. Krohn, H.-U. Reissig, Organic Synthesis Highlights, p. 3, VCH, Weinheim 1991. M. Che´rest, H. Felkin, N. Prudent, Tetrahedron Lett. 1968, 2199. Review: M. T. Reetz, Angew. Chem. Int. Ed. Engl. 1984, 23, 556. M. Braun in Houben–Weyl, Methoden der Organischen Chemie, Vol. E21b (Eds.: G. Helmchen, R. W. Hoffmann, J. Mulzer, E. Schaumann), Thieme, Stuttgart 1996, p. 1713. R. B. Woodward, E. Logusch, K. P. Nambiar, K. Sakan, D. E. Ward, B.-W. Au-Yeung, P. Balaram, L. J. Browne, P. J. Card, C. H. Chen, R. B. Cheˆnebert, A. Fliri, K. Frobel, H.-J. Gais, D. G. Garratt, K. Hayakawa, W. Heggie, D. P. Hesson, D. Hoppe, I. Hoppe, J. A. Hyatt, D. Ikeda, P. A. Jacobi, K. S. Kim, Y. Kobuke, K. Kojima, K. Krowicki, V. J. Lee, T. Leutert, S. Malchenko, J. Martens, R. S. Matthews, B. S. Ong, J. B. Press, T. V. Rajan Babu, G. Rousseau, H. M. Sauter, M. Suzuki, K. Tatsuta, L. M. Tolbert, E. A. Truesdale, I. Uchida, Y. Ueda, T. Uyehara, A. T. Vasella, W. C. Vladuchick, P. A. Wade, R. M. Williams, H. N.-C. Wong, J. Am. Chem. Soc. 1981, 103, 3210. A. I. Meyers, J. P. Hudspeth, Tetrahedron Lett. 1981, 22, 3925. C. H. Heathcock, S. D. Young, J. P. Hagaen, M. C. Pirrung, C. T. White, D. VanDerveer, J. Org. Chem. 1980, 45, 3846.
References 169 M. T. Reetz, M. W. Drewes, A. Schmitz, Angew. Chem. Int.
Ed. Engl. 1987, 26, 1141. 170 M. T. Reetz, Pure Appl. Chem. 1988, 60, 1607. 171 D. A. Evans, J. R. Gage, Tetrahedron Lett. 1990, 31, 6129. 172 E. J. Corey, G. A. Reichard, J. Am. Chem. Soc. 1992, 114,
10677. 173 J.-M. Escudier, M. Baltas, L. Gorrichon, Tetrahedron Lett.
1991, 32, 5345. 174 D. E. Ward, M. Sales, C. C. Man, J. Shen, P. Sasmal, C.
Guo, J. Org. Chem. 2002, 67, 1618. 175 U. Mahler, R. M. Devant, M. Braun, Chem. Ber. 1988, 121,
2035. 176 D. Seebach, E. Juaristi, D. D. Miller, C. Schickli, T.
Weber, Helv. Chim. Acta 1987, 70, 237. 177 D. Seebach, H. O. Kalinowski, B. Bastani, G. Crass, H.
Daum, N. Do¨rr, N. DuPreez, V. Ehrig, W. Langer, C. ¨sser, H.-A. Oei, M. Schmitt, Helv. Chim. Acta 1977, 60, Nu 301. For more recent applications of this method, see: Y. Nomura, M. Iguchi, H. Doi, K. Tomioka, Chem. Pharm. Bull. 2002, 50, 1131. 178 A. Ando, T. Shioiri, Tetrahedron 1989, 45, 4969. 179 M. Uragami, K. Tomioka, K. Koga, Tetrahedron: Asymmetry 1995, 6, 701. 180 M. Majewski, P. Nowak, J. Org. Chem. 2000, 65, 5152.
61
63
2
The Development of Titanium Enolate-based Aldol Reactions Arun K. Ghosh and M. Shevlin 2.1
Introduction
Asymmetric aldol reactions are very important carbon–carbon bondforming reactions in organic synthesis. Applications of aldol reactions have been widespread, particularly in the synthesis of complex and bioactive natural products. An aldol reaction can create two new stereogenic centers depending upon the choice of enolate substituent and the aldehyde or ketone. Furthermore, as shown in Scheme 2.1, the reaction can generate four possible diastereomers when X contains a chiral center – two syn (3 and 4) and two anti diastereomers (5 and 6). Significant advances in asymmetric aldol reactions has led to control of aldol products with high enantio- and diastereoselectivity [1]. The field of stereoselective synthesis of syn aldol products is particularly sophisticated. Important methods are also emerging for stereoselective anti aldol reactions. The use of chiral auxiliaries [2] has been an important concept in terms of generating one diastereomer in a stereopredictable manner. The ready availability of both enantiomers of a chiral auxiliary and easy removal and recovery are very important. syn and anti diastereoselectivity depends on several factors including enolate geometry, related metal ions, and reaction conditions. In general, Z enolates provide syn aldol products with high selectivity and E enolates afford anti aldol products. This result can be rationalized on the basis of a cyclic Zimmerman–Traxler transition state [3]. As shown in transition state 7 for Z enolates (Scheme 2.2) the enolate substituent is generally pseudoaxial and the aldehyde substituent occupies a pseudoequatorial position, providing a syn product, 8. E enolates adopt transition state 9, in which the enolate and aldehyde substituents are pseudoequatorial and leads to the anti aldol product 10. Beside chair-like transition-state models, boat-like transition-state models have been proposed to explain stereoselectivity. It should be noted that strategies have been developed over the years to form the anti product from the Z enolate, as will be discussed in this chapter. Modern Aldol Reactions. Vol. 1: Enolates, Organocatalysis, Biocatalysis and Natural Product Synthesis. Edited by Rainer Mahrwald Copyright 8 2004 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim ISBN: 3-527-30714-1
2 The Development of Titanium Enolate-based Aldol Reactions
64
O
O
+
X
H
R2
R1
O
OH
X
O
R2
or
X
1
2
OH
O
R2
or
O
OH
X
R2
or
OH
X
R2
R1
R1
R1
R1
3
4
5
6
syn -aldol
anti-aldol
Scheme 2.1
Generation of four possible diastereomers when x contains a chiral center.
Diastereoselective aldol reactions have been extensively utilized in the synthesis of complex natural products, including macrolides [4] and ionophores [5]. In this context, iterative approaches are often exploited to append propionate units one at a time. This approach leads to double stereodifferentiation [6] in which the reactant pairs can be either ‘‘matched’’ or ‘‘mismatched’’. The chirality of the two reactants reinforce each other if they are matched. As a result, the diastereoselectivity is often higher than would
R1 O O
R2
O O
R1 R2 M
X
X
9
7
O
O
OH
X
R2 R1
8 Scheme 2.2
Zimmerman–Traxler transition states.
OH
X
R2 R1
10
M
2.2 Additions of Enolates to Ketones
be expected from either reagent alone. In they are mismatched, the chirality of the reagents has a detrimental effect, leading to a lower selectivity than would have been expected. The metal ion associated with the enolate has pronounced effect on stereoselectivity. Numerous titanium enolate-based asymmetric aldol methods have provided convenient access to aldol products in enantiomerically pure form. The titanium enolate aldol reaction has tremendous synthetic potential, because titanium reagents are readily available and inexpensive. This chapter will focus on the development of a variety of titanium enolate aldol reactions. The first titanium enolate aldol reactions were reported by De Kimpe and coworkers [7], who reported the self-condensation and elimination of achloroketones with TiCl 4 and pyridine.
2.2
Additions of Enolates to Ketones
Although aldol additions to aldehydes are robust methods and the corresponding theory is well developed, aldol additions to ketones are still largely unexplored, possibly because of the additional complexity of differentiating sterically between the two different alkyl groups of ketones. The difficulty of aldol additions to ketones is apparent from the lack of asymmetric methods available for addition of titanium enolates to ketones. The notion of syn and anti products also tends to break down when dealing with non-symmetrical ketones with similar substituents. Tanabe and coworkers reported the first instances of additions of titanium enolates to ketones [8]. They reported moderate to excellent yields for several reactions. When the two substituents on the ketone were sufficiently sterically differentiated, good to excellent syn diastereoselectivity was observed. Representative examples of these crossed-aldol reactions are shown in Table 2.1. The initial method involved a catalytic (5 mol%) amount of trimethylsilyl triflate in the reaction mixture; it was suggested this generates a trichlorotitanium triflate species in situ which is more effective at enolization. This theory was, however, called into question by reports of additions of enolates to ketones with trimethylsilyl chloride as catalyst, which also provides moderate to good yields [9]. Additions of enolates of phenyl esters or phenyl thioesters to ketones were also shown to proceed in good yield and with syn diastereoselectivity in the absence of silyl additive [10]. Oshima and coworkers reported reactions of aldehyde enolates with ketones [11]. They used enolates generated from silyl enol ether 14 with methyllithium and transmetalated with titanium tetrabutoxide. Representative examples are shown in Table 2.2. Selectivity was minimal, except for 1,1,1trichloroacetone (entry 5), for which the anti isomer was formed almost exclusively.
65
66
2 The Development of Titanium Enolate-based Aldol Reactions Tab. 2.1
Additions of enolates to ketones. O R1
O HO
TiCl4, base R2
R1
additive O then
11
R3
R3
O HO
+
R4
R1
R2
R4 R2
12
R4
R3
13
Entry R1
R2
R3
R4
Base
Additive
Yield (%) 12:13
Ref.
1 2 3 4 5 6 7 8 9 10 11
Me Me Me Me Et Et H Me Me Me Me
Ph Ph Ph Ph Ph n-C7 H15 Ph Et CH2 Cl Et Et
Me CH2 Cl Me Et Me Me CH2 Cl Ph Ph Et Ph
Bu3 N Bu3 N Bu3 N Bu3 N Bu3 N Bu3 N Bu3 N Et3 N Et3 N Et3 N Et3 N
TMSOTf TMSOTf TMSOTf TMSOTf TMSOTf TMSOTf TMSCl – – – –
95 91 84 92 72 60 94 83 77 77 98
8 8 8 8 8 8 9 10 10 10 10
Ph Ph Et Et Pr Pr TBSOCH2 PhO PhO PhS PhS
100:0 100:0 84:16 72:28 100:0 60:40 – 64:36 68:32 – 77:23
2.3
Addition of Enolates Without a-Substituents to Aldehydes
The development of asymmetric aldol reactions involving enolates with no a-substituent has been hindered by low asymmetric induction compared with the corresponding propionate aldol reactions. It is postulated that this difficulty is because of the lack of stereochemical constraints from the enolate portion of the Zimmerman–Traxler [3] transition-state model. Tab. 2.2
Reaction of aldehyde enolates with ketones. O OSiMe3 C8H17
MeLi
OLi C8H17
Ti(OBu)4
O
OTi(OBu)4 C8H17
R1
R2
OH
H C8H17
14
R2 R1
15
Entry
R1
R2
Yield (%)
Ratioa
1 2 3 4 5
HCcC PhCcC BuCcC Me3 SiCcC CCl3
Me Me Me n-C7 H15 Me
85 86 81 74 72
59:41 52:48 55:45 51:49 >99:1b
a Product b anti:syn
stereochemistry not assigned
2.3 Addition of Enolates Without a-Substituents to Aldehydes Tab. 2.3
Asymmetric acetate aldol reactions. R
O
R
O
OH
R
O
OH
a) BuLi, THF, 0° Ph
N H
16
b) Lewis acid c) PhCHO
Ph
Ph
N H
+
Ph
17
Ph
N H
18
R
Lewis Acid
7:8
Me CH2 OH
Ti(Oi-Pr)3 Cl TiCl 4
83:17 72:28
2.3.1
Stereoselective Acetate Aldol Reactions Using Chiral Auxiliaries
The early work in the field of titanium enolate acetate aldol reactions was conducted by Braun in a general investigation of acetate aldol reactions [12]. The enolates were generated from chiral acetamide 16 by transmetalation of the lithium enolate with triisopropoxytitanium chloride or titanium tetrachloride, as shown in Table 2.3. They reported moderate selectivity for the reaction with benzaldehyde. Yan and coworkers developed titanium enolate acetate aldol reactions as an extension of their boron acetate enolate methodology [13, 14]. Good yields and diastereoselectivity were reported when using camphor-derived N-acyloxazolidinethione 19 (Scheme 2.3, Table 2.4, entries 1–7, and Figure 2.1). The high selectivities were attributed to additional chelation afforded by the thiocarbonyl of the chiral auxiliary in transition state assembly 20, shown in Scheme 2.3. The corresponding camphor-derived oxazolidinone acetate imide provided no stereocontrol, supporting the chelation control hypothesis. Shortly thereafter, acetate aldol reactions using camphor-derived imidazolidinone 27 were reported by Palomo and coworkers [15]. They reported moderate yields and enantioselectivity for a variety of unsaturated and aliphatic aldehydes (Table 2.4, entries 8–12). Interestingly, enantioselectivity for unsaturated aldehydes was opposite that for aliphatic aldehydes. Also, enantioselectivity reported for titanium was completely opposite that of the corresponding lithium enolate reactions. Recently, Phillips and Guz reported a titanium enolate acetate aldol reaction based on a valine-derived N-acyloxazolidinethione 30 [16]. The titanium enolate is directly generated from TiCl 4 , ()-sparteine, and Nmethylpyrrolidone by use of Crimmins’ procedure, as discussed in Section 2.4.1.2.1. Their highly hindered chiral auxiliary can be synthesized in three steps from commercially available starting material. They reported good yields and good to excellent diastereoselectivity for a range of aldehydes,
67
68
2 The Development of Titanium Enolate-based Aldol Reactions Tab. 2.4
Survey of acetate aldol reactions employing chiral auxiliaries. O
O
Lewis acid
R1
R2CHO
O
OH
R1
R2
+
R1
24
23
OH R2
25
Entry
R1
R2
Lewis Acid
Yield (%)
24:25
Ref.
1 2 3 4 5 6 7 8 9 10 11 12 13 14
26 26 26 26 26 26 26 27 27 27 27 27 28 29
n-Pr i-Pr (E)-CH3 CHbCH Ph (E)-PrCHbCH (E)-Me3 SiCHbCH (E)-PhSCHbCH Ph (E)-PhCHbCH i-Pr t-Bu PhCH2 CH2 Ph Ph
TiCl 4 TiCl 4 TiCl 4 TiCl 4 TiCl 4 TiCl 4 TiCl 4 TiCl 4 TiCl 4 TiCl 4 TiCl 4 TiCl 4 Ti(Oi-Pr)3 Cl Ti(Oi-Pr)3 Cl
85 86 86 91 87 80 77 65 70 85 74 37 89 62
95:5 94:6 93:7 91:9 90:10 90:10 90:10 88:12 86:14 17:83 47:53 42:58 35:65 70:30
13 13 13 13 14 14 14 15 15 15 15 15 19 19
as shown in Table 2.5. Once again, the extra chelation afforded by the thiocarbonyl moiety might be responsible for their excellent results. It has, furthermore, been noted that diastereoselectivity depends critically on the exact stoichiometry of the reagents. The stereochemical outcome has been rationalized on the basis of the coordinated chair model 33 or dipole-minimized boat transition model 34, shown in Figure 2.2.
Ph N O
O
N
N S
27
26
O
28
O
29
Fig. 2.1
Chiral auxiliaries used in the asymmetric acetate aldol reactions described in Table 2.4.
2.3 Addition of Enolates Without a-Substituents to Aldehydes
O
O TiCl4, CH2Cl2 i-Pr2NEt N O
S then RCHO
R
O O
H
OH
X
S
N H
O
R
L L
Ti
O
21 +
OH
L R
X
H
20
19
22
Scheme 2.3
Camphor-derived asymmetric acetate aldol reactions.
Urpı´ and Vilarassa investigated an asymmetric acetate aldol reaction in conjunction with the synthesis of Macrolactin A [17]. They reported good yield and excellent stereoselectivity for a handful of unsaturated aldehydes using a valine-derived thiazolidinethione chiral auxiliary. 2.3.2
Stereoselective Acetate Aldol Reactions Involving Chiral Titanium Ligands
Duthaler and coworkers demonstrated that stereoselectivity in the titanium enolate acetate aldol reaction could also be induced by chiral ligands on titanium [18]. Their cyclopentadienylbis(1,2:5,6-di-O-isopropylidene-a-dTab. 2.5
Sterically hindered oxazolidinethione-derived asymmetric acetate aldol reactions. S O
S
O N
TiCl4, (-)-sparteine NMP, CH2Cl2
Ph Ph
O
O
OH
S R
N
30
O
+
Ph
then RCHO
69
O
OH R
N
Ph Ph
Ph
32
31
Entry
R
Yield (%)
31:32
1 2 3 4 5 6 7 8 9 10 11
PhCH2 CH2 n-Pr Et n-Bu (CH3 )2 CHCH2 i-Pr n-C6 H13 (E)-CH3 CHbCH PMBOCH2 TBDPSOCH2 CH2 Ph
83 78 90 77 82 83 78 85 55 56 86
95:5 95:5 93:7 95:5 96:4 92:8 95:5 99:1 97:3 99:1 85:15
70
2 The Development of Titanium Enolate-based Aldol Reactions Ph
Ph Ph
O
H
S Cl Cl
Ph
O S
N
H N
H Ti
Cl
O O
R
H R
O
O
Cl Ti
H
H
34
33
S O
O
Cl Cl
Cl
OH R
N
Ph Ph
35 Fig. 2.2
Transition-state models of the asymmetric acetate aldol reaction.
glucofuranose-3-O-yl)chlorotitanate Lewis acid provided excellent enantioselectivity and moderate to good yields with tert-butyl acetate reacting with a wide range of aliphatic and unsaturated aldehydes (Table 2.6, entries 1–7, and Figure 2.3). The chiral ligands are, furthermore, commercially available and can be recovered after the reaction. This work was extended by Rutledge to an investigation of the effects of the double stereodifferentiation of chiral ligands on titanium and a chiral auxiliary derived from (þ)- or ()-menthol (45 and 46). (Table 2.6, entries 8–11, and Figure 2.4) [19]. Similar work by Fringuielli examined the effects of chiral ligands [20] and auxiliaries [21] on the basis of (þ)-2-carane 43 and (þ)-3-carane 44 (Table 2.6, entries 12–17, and Figure 2.3). Although double stereodifferentiation can result in impressive stereoselectivity, these methods suffer from requiring stoichiometric amounts of both chiral auxiliary and chiral ligands and yields are usually modest. 2.3.3
Alternative Approaches to Acetate Aldol Adducts
Because of the inherent difficulty of inducing chirality in the acetate enolate reaction, alternative approaches have been developed. A general approach is to synthesize a-substituted aldols and then reductively remove the asubstituent. Yan reported a one-step bromination–aldolization which provided a-bromo aldols in excellent yield and diastereoselectivity (Scheme 2.4) [22]. They then demonstrated that the a-bromo substituent could be reduc-
2.3 Addition of Enolates Without a-Substituents to Aldehydes Tab. 2.6
Stereoselective acetate aldol reactions involving chiral titanium Lewis acids.
37 Ti
OLi
O
Cl
BuLi
OR* OR*
R1
R1
36
Ti O
OR* OR*
R2CHO O
O
OH
R1
R2
+
R1
39
R1
OH
38
R2
40
Entry
R1
R2
OR*
Yield (%)
39:40
Ref.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
t-BuO t-BuO t-BuO t-BuO t-BuO t-BuO t-BuO 45 46 45 46 HO HO t-BuO t-BuO 45 47
n-Pr n-C7 H15 i-Pr t-Bu CH2 bCMe Ph 2-furyl Ph Ph Ph Ph Ph Ph Ph Ph Ph Ph
41 41 41 41 41 41 41 41 41 42 42 43 44 43 44 44 44
51 87 66 80 81 69 62 51 54 40 40 54 52 68 70 76 70
97:3 98:2 98:2 96:4 98:2 98:2 95:5 96:4 98:2 30:70 21:79 82:18 83:17 81:19 75:25 90:10 96:4
18 18 18 18 18 18 18 19 19 19 19 20 20 20 20 21 21
tively removed under mild conditions using aluminum amalgam to provide acetate aldols in good yield and enantioselectivity [23]. Urpı´ and co-workers reported aldol-like reactions of titanium enolates with acetals by use of a valine-derived N-acetylthiazolidinethione 52 [24]. They reported moderate to good stereoselectivity and moderate yield for a variety of aliphatic and unsaturated acetals, as shown in Table 2.7. In these reactions, the enolate presumably reacts with the oxycarbenium ion generated by Lewis acid activation of the acetals. Recently, Ghosh and Kim developed an alternative procedure for acetate aldol reactions utilizing ester-derived titanium enolate aldol reactions [25]. As shown in Scheme 2.5, reaction of chloroacetate 55 with TiCl 4 and diisopropylethylamine provided the titanium enolate, which upon reaction with monodentate aldehydes gave a highly anti-diastereoselective aldol product
71
72
2 The Development of Titanium Enolate-based Aldol Reactions
O O
Ph H
O
Ph
OO
Ph
Ph O
O
O O
41
O
42
O
O
H
H H
H
43
44
Fig. 2.3
Chiral ligands used in the stereoselective acetate aldol reactions described in Table 2.6.
56 in excellent yield. Addition of 2 equiv. acetonitrile is critical to the observed diastereoselectivity. Interestingly, when the aldol reaction is conducted with bidentate aldehydes, a variety of anti aldolates are obtained in excellent diastereoselectivity and yield. The reason for this reversal of diastereoselectivity will be discussed in Section 2.4.2.2.1. Reductive removal of chlorine provided convenient access to acetate aldol products. Representative aldol reactions with mono- and bidentate aldehydes are shown in Table 2.8.
2.4
Addition of Enolates with a-Substituents to Aldehydes
As described previously, when enolates have a-substituents, new a- and bchiral centers are formed. Thus, it is possible to form aldol products in which the a- and b-substituents are in a syn or anti relationship to each SiMe3O O H
O
O H
45
46
Fig. 2.4
Chiral auxiliaries used in the stereoselective acetate aldol reactions described in Table 2.6.
47
2.4 Addition of Enolates with a-Substituents to Aldehydes
O
O
b) Br2, i-Pr2NEt
N
R
L
Ti L
Br
O 48
OH
L
O O
H
c) RCHO
S
S
N H
a) TiCl4, i-Pr2NEt
49
O
OH
51 R
OH
a) Et3N, H2O, CH2Cl2
O
R
X
50
Br
b) Al / Hg
R
yield
R
yield
MeCH=CH
87%
MeCH=CH
90%
Ph
96%
Ph
94%
i-Pr
92%
i-Pr
91%
Scheme 2.4
Bromination–aldol reaction and reductive debromination–deprotection.
Tab. 2.7
Acetate aldol adducts from acetals. O
S S
N
O
S 1) TiCl4, i-Pr2NEt
S
N
OMe R
O
S
+
S
N
OMe R
2) RCH(OMe)2, LA
53
52
54
Entry
R
Lewis Acid
Yield (%)
53:54
1 2 3 4 5 6 7 8 9
Ph 4-MeOC6 H4 3-MeOC6 H4 4-ClC6 H4 (E)-PhCHbCH Me n-Pr i-Bu i-Pr
BF3 Et2 O BF3 Et2 O BF3 Et2 O BF3 Et2 O BF3 Et2 O SnCl 4 SnCl 4 SnCl 4 SnCl 4
77 87 75 81 77 57 62 70 60
88:12 93:7 88:12 88:12 82:18 76:24 73:27 79:21 71:29
73
2 The Development of Titanium Enolate-based Aldol Reactions
74
TsNH
TsNH
O
O
HO
RCHO
Cl
55
56
(monodentate)
OH
1) HCO2NH4, Pd/C
O
O
O
OH
TiCl4, i-Pr 2NEt
R
2) LiOH, H2O2
Cl
57
TiCl4, i-Pr 2NEt RCHO (bidentate) TsNH
O
OH
O
OH
1) HCO2NH4, Pd/C O
HO Cl
58
R
2) LiOH, H2O2
59
Scheme 2.5
Asymmetric chloroacetate aldol reactions.
other. Methods have been developed to provide both diastereoselectivity and enantioselectivity in the aldol products. These developments are not mere extensions of previous methods. In fact, many titanium enolate-based asymmetric transformations provide stereoselectivity and efficiency which cannot be obtained by use of other methods. 2.4.1
Syn Diastereoselectivity
In general, most enolates are formed in the Z configuration. When the metal involved in the reaction is acidic enough to coordinate to both the enolate and the aldehyde of the aldol reaction, syn adducts result via a sixmembered cyclic Zimmerman–Traxler [3] transition state. This results in inherent preference for titanium enolate aldol reactions to form syn aldols,
Tab. 2.8
Chloroacetate aldol reactions. Entry
Aldehyde
Additive
Yield (%)
58:56
1 2 3 4 5 6 7 8
i-PrCHO i-PrCHO i-PrCHO i-BuCHO i-BuCHO PhCHO BnOCH2 CHO BnO(CH2 )2 CHO
– MeCN (2.2 equiv.) NMP (2.2 equiv.) MeCN (2.2 equiv.) NMP (2.2 equiv.) NMP (2.2 equiv.) – –
82 66 71 88 90 47 86 79
25:75 2:98 6:94 <1:99 <1:99 4:96 >99:1 96:4
2.4 Addition of Enolates with a-Substituents to Aldehydes
and several excellent methods have been developed to that end. One particular important feature of titanium enolate-based syn aldol reactions is the opportunity to develop chelation-controlled reactions. Several very interesting methods have been developed that exploit this unique ability of titanium. In asymmetric syn aldol reactions utilizing chiral oxazolidinone or oxazolidinethiones one can generate either syn aldol diastereomer from the same chiral auxiliary system. 2.4.1.1
Synthesis of syn Aldols in Racemic Form
Reactions of Ketones Aldol reactions of metal enolates containing a-substituents have been investigated extensively. Reetz reported syn-selective aldol reactions of titanium enolates of a variety of cyclic ketones and aldehydes providing diastereoselective syn aldols in the racemic form [26]. As shown in Table 2.9, formation of titanium enolates from ketones was achieved by transmetalation of the corresponding lithium enolates. They reported good to excellent selectivity for reactions of cyclic ketones with aldehydes. Whereas Z enolates generally furnish syn aldol products under kinetic conditions, formation of syn aldols from cyclic enolates seems to be difficult. Interestingly, titanium enolates of cyclic ketones, which can only form Z enolates, provided high syn diastereoselectivity. Good selectivity in the reactions of acyclic ketones 2.4.1.1.1
Tab. 2.9
Aldol reactions of cyclic ketones with aldehydes. O
OTiL 3
OLi Ti(Oi-Pr)3Cl or
LDA (CH2)n
Ti(NEt2)3Br
(CH2)n
(CH2)n
60
RCHO
O
O
OH R
OH R
+
(CH2)n
(CH2)n
61
62
Entry
R
n
Lewis Acid
61:62
1 2 3 4 5 6 7
Ph Ph Ph Ph i-Pr Ph Ph
3 4 4 4 4 5 6
Ti(NEt2 )3 Br Ti(NEt2 )3 Br Ti(NMe2 )3 Br Ti(Oi-Pr)3 Cl Ti(Oi-Pr)3 Cl Ti(NEt2 )3 Br Ti(Oi-Pr)3 Cl
85:15 97:3 92:8 86:15 96:4 90:10 91:9
75
76
2 The Development of Titanium Enolate-based Aldol Reactions a) LDA
O
O
OH
64
b) Ti(Oi-Pr)3Cl R1
R1
R2
c) R2CHO
63
O R1
+
R2
R1
R2
64 : 65
Et
Ph
89 : 11
Et
t-Bu 81 : 19
t-Bu Ph
87 : 13
Ph
87 : 13
Ph
65
OH
Scheme 2.6
Aldol reactions of acyclic ketones with aldehydes.
with aldehydes has been observed, as shown in Scheme 2.6. Interestingly, syn aldol product preference occurred almost independently of enolate configuration; stereochemical rationale has not been forthcoming. The aldol reactions of titanium enolates generated in situ were reported by Harrison [27] to give excellent yield and selectivity for syn aldol products, as shown in Table 2.10. However, methyl ketones tended to eliminate under the reaction conditions and provided a,b-unsaturated ketones. Reactions with propiophenone and benzaldehyde provided excellent yields of aldolates, with syn aldols being the major product (95:5 ratio). The stereochemical outcome was rationalized by Zimmerman–Traxler transition state model 67. Evans used a combination of titanium tetrachloride and diisopropylethylamine, which proved to be efficient and general for many different kinds of substrates [28]. The syn aldol diastereoselectivity was comparable with that of boron-mediated processes. Isolated yields with titanium enolates are considerably higher than from boron enolates. Furthermore, syn-selectivity Tab. 2.10
syn-Selective aldol reactions of directly generated titanium enolates.
O Ph
TiCl 4, Et 3N
Ar
H
O
O O
ArCHO H
TiLn Ph
O Ar
Ph
67
66
OH
68
+
OH Ar
Ph
69
Entry
Ar
Yield (%)
68:69
1 2 3 4 5
Ph p-MeC6 H4 p-MeOC6 H4 o-MeOC6 H4 p-NO2 C6 H4
91 94 95 96 98
95:5 96:4 89:11 87:13 87:13
2.4 Addition of Enolates with a-Substituents to Aldehydes O
O
OH 71
OH 72
O
a) TiCl4, i-Pr2NEt R b) i-PrCHO
R
70
i-Pr
R
+
i-Pr
R
Yield
71 : 72
Et
95
98 : 2
i-Pr 95
93 : 7
Scheme 2.7
Aldol reactions of directly generated titanium enolates.
depends on the size of the amine bases. The enolates exist as aggregated complexes, as was evidenced by NMR studies. Representative examples are shown in Scheme 2.7. Reactions of Esters and Thiol Esters Syn-selective aldol reactions involving directly generated thiol ester enolates were reported to give moderate to good selectivity and moderate yield, as shown in Table 2.11 [29]. Modest anti-selectivity was obtained in reactions of 2-pyridylthiopropionate (entry 7), suggesting the 2-pyridyl moiety could be coordinating with titanium. The reactions of a-thio-substituted ester enolates have been reported to give moderate to excellent selectivity and moderate to good yield, as shown in Table 2.12 (entries 1–6) [29]. Interestingly, for a-substituted propionates (entries 4–6), selectivity was good to excellent for the product in which the 2.4.1.1.2
Tab. 2.11
syn-Selective aldol reactions of thiol esters. O
O
O
OH
OH
a) TiCl4, Et3N R1
b) R2CHO
73
R1
R2
+
R1
R2
75
74
Entry
R1
R2
Yield (%)
74:75
1 2 3 4 5 6 7 8 9
PhS PhS PhS t-BuS t-BuS t-BuS 2-pyridyl-S o-MeOC6 H4 S C6 F5 S
Ph n-Pr i-Pr Ph n-Pr i-Pr i-Pr Ph Ph
70 68 65 77 72 75 69 71 40
85:15 78:22 89:11 86:14 69:31 71:29 29:71 87:13 95:5
77
78
2 The Development of Titanium Enolate-based Aldol Reactions Tab. 2.12
syn-Selective aldol reactions with a-heteroatomic substituents. O
O R3
R1
OH
R1
R2
76
R4
O
+
OH
R1
R4
R3 R 2
R3 R2
77
78
Entry
R1
R2
R3
R4
Additive
Yield (%)
77:78
Ref.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
EtO EtO EtO EtO EtO EtO MeO MeO MeO MeO MeO EtO EtO Me Me Me Me Me Et i-Pr
n-BuS n-BuS n-BuS n-BuS n-BuS n-BuS PhSe PhSe PhSe PhSe PhSe PhSe PhSe PhSe PhSe PhSe PhSe PhSe PhSe PhSe
H H H Me Me Me H H H H H Me Me H H H H H H H
Ph n-Pr i-Pr Ph n-Pr i-Pr i-Pr Ph PhCH2 CH2 (E)-PhCHbCH n-C5 H11 Ph i-Pr Ph i-Pr PhCHbCH PhCH2 CH2 n-C6 H13 CcC Ph PhCH2 CH2
– – – – – – Ph3 P Ph3 PO Ph3 PO Ph3 PO Ph3 PO Ph3 P Ph3 P – – – – – – –
80 74 73 90 71 76 86 92 92 81 83 93 92 91 75 74 94 97 71 92
94:6 76:24 84:16 95:5 88:12 88:12 90:10 97:3 88:12 >98:2 95:5 >98:2 >98:2 >98:2 >98:2 96:4 93:7 94:6 >98:2 >98:2
29 29 29 29 29 29 30 30 30 30 30 31 31 31 31 31 31 31 31 31
a-sulfur substituent and b-hydroxyl group are syn to each other. This might indicate additional chelation to titanium. Reactions of a-selenoacetate enolates have been reported to give excellent selectivity and yield in the presence of triphenylphosphine or triphenylphosphine oxide, as shown in Table 2.12 (entries 7–11) [30]. This work was extended to a-selenopropionate esters (Table 2.12, entries 12 and 13) and aselenoketones (Table 2.12, entries 14–20) [31]. As for a-sulfur substituents, the a-selenopropionate ester enolates gave excellent yield and selectivity for aldols in which the a-heteroatom and b-hydroxyl group were syn to each other. These papers highlighted the importance of the presence of 1 equiv. bulky phosphine or amine to coordinate to titanium to improve the yield and the selectivity. Aldol Reactions of Aldehyde Hydrazones In contrast with the aldol reactions of ketones or carboxylic acid derivatives, those of aldehyde enolates typically proceed with little to no selectivity. This 2.4.1.1.3
2.4 Addition of Enolates with a-Substituents to Aldehydes Tab. 2.13
syn-Selective aldol-like reactions of hydrazones with aldehydes. Me2NN
LDA
Me2NN
Li Ti(Oi-Pr)3Cl or
Me2NN
Ti(NEt2)3Br
H
H
H
R1
R1
TiL 3
R1 R2CHO
79 Me2NN
Me2NN
OH
H
R2
+
OH
H
R2
R1
R1
80
81
Entry
R1
R2
Lewis Acid
Yield (%)
80:81
1 2 3 4 5 6 7 8 9 10
Me Me Ph Ph Ph Ph Ph i-Pr Me Me
Ph Ph Ph p-NO2 C6 H4 Me Me i-Pr Ph Me t-Bu
Ti(Oi-Pr)3 Cl Ti(NEt2 )3 Br Ti(Oi-Pr)3 Cl Ti(Oi-Pr)3 Cl Ti(Oi-Pr)3 Cl Ti(NEt2 )3 Br Ti(Oi-Pr)3 Cl Ti(Oi-Pr)3 Cl Ti(Oi-Pr)3 Cl Ti(Oi-Pr)3 Cl
80 61 95 40 95 50 78 78 61 70
91:9 85:15 98:2 98:2 98:2 90:10 98:2 94:6 95:5 93:7
could be because of lack of steric bulk to influence the cyclic six-membered Zimmerman–Traxler transition state. For this reason there are few useful reactions that directly utilize aldehyde enolates, even though the term aldol originally referred to a b-hydroxyaldehyde. This issue was resolved by using titanium enolates generated from N,N-dimethylhydrazones by transmetalation with Ti(Oi-Pr)3 Cl or Ti(NEt2 )3 Br [32]. The reaction furnished racemic syn aldols with excellent selectivity and moderate to excellent yield, as shown in Table 2.13. Reactions with cyclic ketone hydrazones also provided excellent syn diastereoselectivity and yields, as shown in Scheme 2.8.
Me2NN
OH
Me2NN
Ph
>98:2 syn/anti 82
83
Scheme 2.8
syn-Selective aldol-like reaction of cyclic hydrazone.
79
80
2 The Development of Titanium Enolate-based Aldol Reactions
Synthesis of Optically Active syn Aldols Using Chiral Auxiliaries Asymmetric aldol reactions utilizing chiral auxiliaries or templates have emerged as one of the most reliable methods in organic synthesis. Both synand anti-selective aldol reactions have been developed over the years. The field of asymmetric syn aldol reactions has been largely advanced by Evans since his development of dibutylboron enolate aldol chemistry based on amino acid-derived chiral oxazolidinones. This method requires expensive dibutylboron triflate, however, and the amino acid-derived chiral auxiliary is only readily available in one enantiomer and thus only provides one enantiomer of the syn aldol. Several methods developed on the basis of titanium enolates provide convenient access to both ‘‘Evans’’ and ‘‘non-Evans’’ syn aldol products. 2.4.1.2
Amino Acid-derived Oxazolidinone and Related Auxiliaries Oxazolidinone-, oxazolidinethione-, oxazolidineselone-, and thiazolidinethione-based enolates react with aldehydes via the well-established sixmembered Zimmerman–Traxler [3] chair-like transition state. Exhaustive studies and analysis by Crimmins have established the theoretical basis of these reactions [33]. These transition states can proceed without chelation between carbonyl or thiocarbonyl (84) or with an additional chelation to titanium (85), as shown in Scheme 2.9. To proceed via the chelated transition structure 85, one of the ligands on titanium (typically chloride) must be displaced by the carbonyl or thiocarbonyl group. Although these groups are not sufficiently nucleophilic to completely displace this ligand on their own, 2.4.1.2.1
Y R1 LnTi
Y X
N H
R3 H
O O
R1
+L
Y
R2
OH R3
N
O O
H
84
O
L
R3
R2
X
X
N H
-L
O
"Evans" syn 86 Scheme 2.9
Asymmetric syn aldol transition-state models.
OH R3
N R2
R2 R1
L
85
X Y
L
Ti
R1
"non-Evans" syn 87
2.4 Addition of Enolates with a-Substituents to Aldehydes O
O
Ti(Oi-Pr) 3
R = i-Pr
PhCHO
N
O
O
O
Ph
N
O
O
O
OH
+
OH Ph
N
O
a) LDA
89
90
b) Ti(Oi-Pr)3Cl
89 : 90
eq. Ti(Oi-Pr)3Cl O
O O
N
3
3 : 92
1
77 : 16
OH
O
R
88 a) TiCl4
R = Bn
O
O
b) base O
N Bn
TiCl 3
O
O i-PrCHO
O
+
N Bn
O
OH
N
O
Bn
91 base
91 : 92
yield
i-Pr2NEt
94 : 6
84
TMEDA
98 : 2
83
92
Scheme 2.10
syn-Selective aldol reactions involving oxazolidinone chiral auxiliaries.
the ligand can be easily abstracted with a second equivalent of titanium. A consequence of this is that these substrates will occasionally give mixtures of products resulting from incomplete conversion of 84 to 85. Also, addition of chelating ligands, extra equivalents of amine bases, or even some solvent molecules tend to disfavor transition state 85, because of their preferential chelation to the titanium enolate. The initial adaptation of amino acid-derived oxazolidinone chiral auxiliaries to titanium enolate aldol reactions was conducted by Thornton [34– 36]. The procedure involved transmetalation of the lithium enolate with Ti(Oi-Pr)3 Cl in THF or ether. By varying the amount of titanium, the ratio of products 89:90 could be varied, as shown in Scheme 2.10. They attributed this observation to quenching of lithium interference, but it could also be a matter of switching between chelated and non-chelated transition structures with excess titanium. They observed that a stoichiometric amount of THF gave rise to titanium chelation [35]. By choosing the more powerfully chelating THF they could favor formation of the syn product 89 whereas the weakly chelating ether favored syn product 90. Because both ethereal solvents can chelate to titanium, however, their products were always complex mixtures of both syn and anti aldols. The ethereal solvents were necessary because of solubility problems. These complications were alleviated when Evans demonstrated that titanium enolates could be directly generated in dichloromethane with amine
81
82
2 The Development of Titanium Enolate-based Aldol Reactions
bases [28]. Stereoselection and reaction yields are comparable with those of boron enolate-based syn aldol reactions. Amine bases seemed to have a noticeable effect on stereoselectivity. As shown in Scheme 2.10, the use of TMEDA improved selectivity compared with i-Pr2 NEt; this suggests the reaction proceeded through non-chelated transition state 84. Furthermore, stoichiometry of aldehydes (2 equiv.) is also critical for complete conversion. Crimmins et al. developed amino acid-derived oxazolidinethione [37] and thiazolidinethione [38] chiral auxiliaries and demonstrated their utility in titanium enolate aldol reactions. Depending upon the amount and nature of amine bases and the stoichiometry of TiCl 4 , ‘‘Evans’’ or ‘‘non-Evans’’ syn aldol products can be provided with excellent diastereoselectivity and isolated yields. Reactions involving oxazolidinethione auxiliaries led to ‘‘Evans’’ syn aldol product 94 when 1.0 equiv. TiCl 4 , 1.1 equiv. aldehyde, and 2.5 equiv. ()-sparteine were used, as shown in Table 2.14, entries 1–3. Rationalizing that the extra amine base or excess aldehyde could be acting as a ligand on titanium, they demonstrated that 1.05 equiv. TiCl 4 , 1.1 equiv. aldehyde, 1.0 equiv. ()-sparteine, and 1.0 equiv. N-methylpyrrolidinone also gave product 94, the latter conditions being more economical and simpler to work up. ()-Sparteine was discovered to have a dramatic rate-enhancement effect on these aldol reactions, but it was demonstrated that its chiral architecture did not lead to significant asymmetric induction. Using oxazolidinethione auxiliaries, the chelation-controlled ‘‘non-Evans’’ product 95
Tab. 2.14
Oxazolidinethione based syn aldol reactions. O
O a) 1.0 eq. TiCl4
R
N
S
OH
b) 2.5 eq. (-)-sparteine O
O S
A
c) RCHO
B
a) 2 eq. TiCl4
Bn
94 +
N
O
O Bn
93
S
OH R
N
b) 1.1 eq. i-Pr2NEt Bn
c) RCHO
95
Entry
Method
R
Yield (%)
94:95:anti
1 2 3 4 5 6
A A A B B B
i-Pr Ph MeCHbCH i-Pr Ph MeCHbCH
70 89 65 87 88 81
99:1:0 97:2:1 97:2:1 0:95:5 1:98:1 0:95:5
2.4 Addition of Enolates with a-Substituents to Aldehydes O MeNHOMe
MeO
N
OH R
imidazole O
O S
OH
(90%)
97
R
N
OH Bn
NaBH4
96
HO
R
EtOH (85%)
98
Scheme 2.11
Conversion of oxazolidinethione auxiliary to other functionality.
could be formed by using 2 equiv. TiCl 4 and only 1 equiv. diisopropylethylamine, as shown in Table 2.14, entries 4–6. In a typical procedure, 2 mmol TiCl 4 was added dropwise to a solution of 1 mmol oxazolidinethione 93 in 6 mL CH2 Cl2 at 0 C and stirred for 5 min. i-Pr2 NEt (1.1 mmol) was added dropwise and the dark red solution stirred for 20 min at 0 C and then cooled to 78 C. Aldehyde (1.1 mmol) was added dropwise and stirred for 1 h. One intrinsic feature of oxazolidinethiones is that the chiral auxiliary could be readily converted to Weinreb amide 97 by reaction with imidazole and methoxylamine salt, as shown in Scheme 2.11. Similarly, sodium borohydride reduction gave alcohol 98 and DIBALH reduction provided the corresponding aldehyde in excellent yield. To demonstrate the full utility of the ()-sparteine-mediated enolization, they also showed that oxazolidinone chiral auxiliaries could be reacted with either 1.1 equiv. TiCl 4 and 2.5 equiv. ()-sparteine or 1.05 equiv. TiCl 4 , 1.0 equiv. ()-sparteine, and 1.0 equiv. N-methylpyrrolidinone to yield product 94. Thiazolidinethione-derived chiral auxiliaries have similar reactivity and selectivity, as shown in Table 2.15. Because of the increased nucleophilicity of the thiazolidinethione ring, chelation-controlled reaction through transition state 85 enabled preferential formation of the ‘‘non-Evans’’ syn product 101. One equivalent of i-Pr2 NEt, TMEDA, or ()-sparteine and 1 equiv. TiCl 4 provided 101 diastereoselectively. Interestingly, when the reaction was performed with 2 equiv. of TMEDA or ()-sparteine, ‘‘Evans’’ syn aldol adduct 100 was obtained diastereoselectively. These aldol products can be converted to a variety of other functionality under mild conditions. Other oxazolidinethiones and thiazolidinethiones have resulted in comparable diastereoselectivity and yields. Similar reactions utilizing oxazolidineselone chiral auxiliaries were developed by Silks and coworkers [39]. They demonstrated good to excellent
83
84
2 The Development of Titanium Enolate-based Aldol Reactions Tab. 2.15
Thiazolidinethione-based syn aldol reactions. O
S S
a) 1 eq. TiCl4
S
A
Bn
100 +
c) RCHO
N
O
S
Bn
B
99
R
N
b) 1 eq. (-)-sparteine O
S
OH
a) 1 eq. TiCl4
S
OH R
N
b) 2 eq. (-)-sparteine Bn
c) RCHO
101
Entry
Method
R
Yield (%)
100:101
1 2 3 4
A A B B
i-Pr Ph i-Pr Ph
60 52 75 62
2:98 <1:99 97:3 >99:1
yields and excellent stereoselectivity in reactions of N-propionyl- and Nbenzyloxyacetyloxazolidineselone with a variety of aldehydes, as shown in Table 2.16. The acylated oxazolidineselone can be prepared in a one-pot procedure from oxazoline 102 via lithiation, addition of elemental selenium, and quenching with the appropriate acyl chloride. The selenocarbonyl also has utility as a chiral probe via 77 Se NMR. The selone chiral auxiliary can also be converted to other functionality similar to oxazolidinethione 96 and thiazolidinethione 99. Camphor-derived Chiral Auxiliaries After adaptation of amino acid-derived oxazolidinone chiral auxiliaries to titanium enolate aldol reactions, Thornton and coworkers went on to develop a camphor-derived chiral auxiliary [40]. Moderate to good selectivity was observed for reactions with a variety of aldehydes using camphorquinonederived N-propionyl oxazolidinone 106, as shown in Table 2.17. The carbonyl of the oxazolidinone is not a good enough nucleophile to completely displace chloride to form chelated transition structure 107, so the nonchelated transition state assembly 108 is always a competing pathway. Stereodifferentiation experiments with (R)- and (S)-2-benzyloxypropanal were also investigated. syn Diastereoselectivity was, however, moderate (53% de) compared with lithium enolate-based reactions which provided high selectivity (85% de) for the (R) isomer. Reactions with (S)-benzyloxypropanal resulted in mismatched aldehyde and enolate selectivity and a 42:52 ratio of syn adducts. 2.4.1.2.2
2.4 Addition of Enolates with a-Substituents to Aldehydes
85
Tab. 2.16
Oxazolidineselone-based syn aldol reactions. O
Se
OH R3
N
O
R2 1) LiHMDS N
O
a) TiCl4
O
Se
R1
104 +
b) i-Pr2NEt
2) Se N
O
3) EtCOCl R1
R1
102
O
Se
c) R3CHO
R2
R3
N
O
103
OH
R2 R1
105 Entry
R1
R2
R3
Yield (%)
104:105
1 2 3 4
i-Pr Bn Bn Bn
BnO Me Me Me
i-Pr i-Pr MeCHbCH Ph
72 86 86 91
75:25 >99:1 >99:1 >99:1
Tab. 2.17
Camphor-derived syn aldol reactions.
O
O a) LDA N O O
b) Ti(Oi-Pr)3Cl
O
L L
Ti
c) RCHO L
O O
N H R
O O
R
H -L
106
N H
+L
O
R
109
L
108
O
OH
X
L
Ti
O O
H
107
L
L
+
OH R
X
110
Entry
R
109:110:anti
1 2 3 4
Et Ph i-Pr MeCHbCH
76:13:11 79:2:19 86:2:12 49:4:49
86
2 The Development of Titanium Enolate-based Aldol Reactions Tab. 2.18
Camphor-derived syn-selective aldol reactions.
O
O O
a) LDA
O
L N O
b) Ti(Oi-Pr)3Cl
L
c) RCHO
Ti L
O
N H
H
R
O O
N
+L H
-L
R
O O
H
O
111
O
OH
X
L
Ti L
113
112
O
L
L
R
+
OH
X
R
115
114 Entry
R
Yield (%)
114:115
1 2 3 4
Me i-Pr Ph MeCHbCH
84 70 79 70
>99:1 >99:1 >99:1 99:1
To improve the p-facial and syn selectivity of the camphor-derived chiral auxiliary, Ahn et al. developed a chiral oxazinone derived from ketopinic acid (111) [41]. The explanation for the low diastereoselectivity of camphorderived auxiliary 106 was that the steric influence of the proximal bridgehead methyl group was insufficient for p-facial selectivity. It seemed that the syn-7-methyl group was too far away from the acyl moiety. In oxazinonebased chiral auxiliary 111 one enolate face is in proximity to the camphor skeleton and, as a result, steric bias was significantly enhanced over the 106-derived system. Moderate to good yields and near complete syn diastereoselectivity for a range of aldehydes have been reported, as shown in Table 2.18. The steric influence of their auxiliary is apparently strong enough to overcome inherent weakness in titanium chelation; near complete selectivity for chelation-controlled product 114 arising from transition state assembly 112 was reported. Yan et al. developed camphor-derived oxazolidinethione chiral auxiliary 116 from ketopinic acid [42, 43]. The opposing location of the N-acyl group in this auxiliary when compared with 106 and 111 leads to formation of the other syn product 120 via chelation control. Good yields and excellent selectivity were reported for a range of aldehydes, as shown in Table 2.19. Be-
2.4 Addition of Enolates with a-Substituents to Aldehydes
87
Tab. 2.19
Camphor-derived syn-selective aldol reactions.
O a) TiCl4 O N
c) RCHO
L
Ti L
S
O
N H
L
L
b) i-Pr2NEt
O S
R
O O
H
116
R +L
H
L
Ti L
118
OH
X
L
O O
117
O
S
N H
-L
O
R
119
+
OH
X
R
120
Entry
R
Yield (%)
119:120
1 2 3
i-Pr Ph MeCHbCH
85 84 86
2:98 3:97 <1:99
cause the thiocarbonyl is a good ligand for titanium, the reaction proceeds through chelated transition state assembly 118. The reactions with the corresponding N-bromoacyl derivatives also provided excellent syn diastereoselectivity and isolated yields [22]. The observed syn stereochemistry is consistent with chelation-controlled model 118. Aminoindanol and Amino Acid-derived Chiral Auxiliaries Ghosh et al. developed highly diastereoselective ester-derived titanium enolate-based syn aldol reactions [44]. Chiral sulfonamide 121 was readily prepared by tosylation of optically active aminoindanol followed by reaction with propionyl chloride in pyridine. As shown in Scheme 2.12, the corresponding titanium enolate of 121 was generated with 1.2 equiv. TiCl 4 and 3.8 equiv. i-Pr2 NEt at 0 C to 23 C for 1 h. These conditions provided the Z enolate which, upon reacting with a variety of bidentate titanium-complexed aldehydes (2 equiv. aldehyde/2.2 equiv. TiCl 4 ), afforded good to excellent yields of syn aldol products 125 with high diastereoselectivity, as shown in Table 2.20. On the other hand, when the reaction was carried out with monodentate aldehydes, anti aldol product 126 was obtained. The stereochemical outcome of these reactions has been rationalized by use of a chelation-controlled model. In this model, the titanium enolate 2.4.1.2.3
88
2 The Development of Titanium Enolate-based Aldol Reactions Ts
TsNH
N
O
Ti
O
a) TiCl4 O
O
b) i-Pr2NEt
122
121 O
( )n
H
O L L
Ti O
R1
O L
O L L Ti L N L
Bn
RCHO
OBn
O L
L R2 R1
O
Ti LL
S O O
124
123
TsNH
O L L Ti L N L O S O
O
OH R2
O
TsNH
O
R2
O
R1
125
OH
R1
126
Scheme 2.12
Aminoindanol-derived asymmetric aldol reactions.
is a seven-membered metallocycle and is assumed to have a chair-like conformation. It has been postulated that anti aldol diastereoselectivity was obtained from monodentate aldehydes via a Zimmerman–Traxler-like model 124 whereas reactions with bidentate aldehydes presumably proceed through 123. The oxyaldehyde side-chain is oriented pseudo-axially for effective metal chelation. As evidenced, this methodology provides excellent diastereoselectivity with a range of esters. The enhanced selectivity for benzyloxyacetaldehyde and benzyloxypropionaldeyde is because of five- or sixmembered chelation. Reaction of benzyloxybutyraldehyde results in slightly reduced the syn diastereoselectivity. This might be because of less favorable seven-membered chelation. On the basis of the possible transition state assembly 123, Ghosh and coworkers further speculated that the a-chiral center or the indane ring
2.4 Addition of Enolates with a-Substituents to Aldehydes Tab. 2.20
Aminoindanol-based syn aldol reactions. Entry
R1
R2
Yield (%)
125:126
1 2 3 4 5 6 7
Me Me Bn Bn Bn i-Bu i-Bu
BnOCH2 BnO(CH2 )2 BnOCH2 BnO(CH2 )2 BnO(CH2 )3 BnOCH2 BnO(CH2 )2
84 51 84 51 55 83 56
98:2 98:2 99:1 99:1 94:6 99:1 99:1
may not be necessary for syn selectivity for bidentate oxyaldehydes [45]. Indeed, the corresponding phenylalanine-derived chiral auxiliary 127 (R ¼ Bn) resulted in good syn selectivity with different bidentate oxyaldehydes, as shown in Table 2.21. They also investigated the effect of the b-chiral substituent and discovered that use of valine-derived chiral auxiliary 127 (R ¼ i-Pr) resulted in good yields and excellent syn selectivity for a wide range of mono- and bidentate aldehydes [46]. Reaction of enolate 124 with a variety of monodentate aldehydes provided aldol products with good to excellent anti diastereoselectivity; this will be Tab. 2.21
Amino acid-derived syn aldol reactions. OL
a) TiCl4
O
b) i-Pr2NEt
TsHN
L
O
O
c) R2CHO, TiCl4
R1
O
Ti
O L N
L R1
Bn
H
O
L
Ti S
L
L p-Tol
O
128
127
O TsHN
OH
O
R2
O TsHN
O
+
R1
OH R2
R1
130
129
Entry
R1
R2
Yield (%)
129:130
1 2 3 4
Bn Bn i-Pr i-Pr
BnOCH2 BnO(CH2 )2 i-Bu PhCHbCH
80 81 93 89
98:2 97:3 95:5 96:4
89
90
2 The Development of Titanium Enolate-based Aldol Reactions Tab. 2.22
Effect of TiCl 4 stoichiometry on diastereoselectivity. TsNH
O
OH Ph
O a) TiCl 4
TsNH
O
132
b) i-Pr2NEt O
+
c) PhCH=CHCHO, TiCl4
131
TsNH O O
OH Ph
133 Entry
TiCl 4 Equiv.
Yield (%)
132:133
1 2 3 4 5 6
0.0 1.0 2.0 3.0 4.0 5.0
6 68 85 94 94 95
0:100 2:98 16:84 75:25 93:7 94:6
discussed in detail in Section 2.4.2.2. Subsequent investigation revealed that the stoichiometry of TiCl 4 required for aldehyde activation is critical to the observed selectivity [47]. As shown in Table 2.22, with increasing quantities of TiCl 4 , the syn:anti product ratio and reaction yields improved. There was, however, a dramatic reversal of diastereoselectivity when 3 equiv. TiCl 4 was used for complexation with cinnamaldehyde (2 equiv.). Reaction of 2 equiv. cinnamaldehyde precomplexed with 5 equiv. TiCl 4 provided diastereoselective syn aldol product 132 in excellent yield. The scope and generality of this methodology were then examined with a variety of aldehydes, as shown in Table 2.23. The stereochemical outcome can be rationalized by using open-chain transition state model 136, which is favored by use of increasing amounts of TiCl 4 and furnishes syn aldol 138 as the major product. One of the most important features of ester-derived titanium enolate aldol reactions is that, depending upon the choice of aldehyde and the stoichiometry of TiCl 4 , one can generate syn or anti aldol adducts diastereoselectively from the same chiral auxiliary. Ready availability of either enantiomer of cis-aminoindanol also provides convenient access to both diastereomers of syn or anti aldols in optically active form. Other Chiral Auxiliaries Other chiral auxiliaries used in syn aldol reactions are illustrated in Figure 2.5. Xiang et al. developed N-tosylnorephedrine-based chiral auxiliary 139 2.4.1.2.4
2.4 Addition of Enolates with a-Substituents to Aldehydes
91
Tab. 2.23
syn-Selective aminoindanol-derived aldol reactions. O a) TiCl4
TsNH
LnTi
L R2
O
O L L Ti L N L O S O
O
Ti
L
R1
LL
b) i-Pr2NEt O c) RCHO, TiCl4
Ti Ln
O
H
CH 3
H3C
H
O
O Ti Ln N
134
Ts
136
135
TsNH
TsNH
O
O
OH R2 +
O
OH R2
O R1
R1
138
137 Entry
R
Yield (%)
137:138
1 2 3 4 5
Et i-Pr t-Bu Ph Me 2 CbCH
80 82 65 91 65
13:87 13:87 1:99 7:93 11:89
[48]. It was shown that 139-based esters could enolize in the presence of TiCl 4 and amine bases. Although the auxiliary favored syn products, the reactions yielded complex mixtures of both syn and anti products. Ahn and coworkers developed stilbenediamine-derived 1,2,5-thiadiazolidine-1,1-dioxide-based chiral auxiliary 140 and demonstrated its utility in syn aldol reactions [49]. Excellent selectivity and yield were observed for a variety of aldehydes, as shown in Table 2.24, entries 1–3. The cyclic sulfamide auxiliary is novel in that it is bifunctional and C2 -symmetric, so only
Ph Ts
O
NH
O
Ph
N
O
N S
Ph
O O
139
140
Fig. 2.5
Other chiral auxiliaries used in syn aldol reactions.
Ph
N N
141
92
2 The Development of Titanium Enolate-based Aldol Reactions Tab. 2.24
syn Aldol reactions utilizing other chiral auxiliaries. O
O RCHO
X
R
X
142
O
OH
+
OH
X
R
144
143
Entry
X
R
Yield (%)
143:144
Ref.
1 2 3 4 5
140 140 140 141 141
Ph i-Pr (E)-MeCHbCH p-MeOC6 H4 t-Bu
91 93 89 93 70
96:4 97:3 95:5 96:4 75:25
49 49 49 50 50
half an equivalent of chiral material is needed. The first aldol fragment can be removed by simple treatment with sodium methoxide in THF. To remove the second aldol fragment it was necessary to protect the free sulfamide with a Boc group. The second aldol product could then be removed by a method analogous to the first. The favored product 143 is derived from chelation control, because of the excellent chelating ability of the sulfone in the chiral auxiliary. Hitchcock and coworkers developed ephedrine-derived 3,4,5,6-tetrahydro2H-1,3,4-oxadiazin-2-one-based chiral auxiliary 141 and demonstrated its utility in aldol reactions [50]. It was discovered that the aldehyde had to be present during enolization for reaction to occur, because of difficulties in enolization. Use of aromatic aldehydes resulted in good yield and good to excellent selectivity, as did aliphatic aldehydes without a-hydrogen atoms. This method is not useful for aldehydes bearing a-hydrogen atoms, because of self-condensation. Synthesis of Optically Active syn Aldols Using Chiral Titanium Ligands Duthaler and coworkers used carbohydrate–titanium complexes for synthesis of optically active syn-b-hydroxy-a-amino acids [51]. These syn-aaminoaldols were obtained in moderate yield and excellent syn diastereoselectivity, as shown in Table 2.25. Transmetalation of the lithium enolate of glycine ester derivative 145 with chiral titanium complex 146 provided a titanium enolate which upon reaction with a wide variety of aldehydes provided syn-b-hydroxy-a-amino esters 148. Subsequent hydrolysis and Nprotection gave a-aminoaldols 149. Duthaler and coworkers also reported asymmetric syn aldol methodology based on their titanium complex 146 [52]. Heathcock demonstrated the capacity of 2,6-dimethylphenyl propionate-derived lithium enolates to undergo addition to a range of aldehydes affording racemic anti aldol adduct 151 2.4.1.3
2.4 Addition of Enolates with a-Substituents to Aldehydes Tab. 2.25
syn Aldol reactions of glycine derivatives. OLi
O
Ti LDA
EtO
EtO Si
Si
Ti O
OR* OR*
OR*
N
N Si
146 OR*
Cl
EtO
Si
N Si
Si
145 R1CHO
OH
O
R1
EtO
OH
O protection
NHR2
NH2
149
O O
H
R1
EtO
148
O O
R* = O O
147 Entry
R1
R2
Yield (%)
de (%)
1 2 3 4
Me CH2 bCMe Ph t-BuO2 C
Boc CHO Boc CHO
53 61 60 66
>98 99 >96 >96
with excellent diastereoselectivity. The E enolate presumably reacted with aldehydes via a cyclic transition state to form anti aldol adducts 151. Transmetalation of the lithium enolate of 150 with 146 and reaction with a variety of aldehydes provided syn aldols in moderate to good yield and excellent stereoselectivity, as shown in Table 2.26. It was observed that the kinetically generated E enolates were responsible for the observed stereoselectivity. Equilibration to the more stable Z-enolates gave anti products, as discussed in Section 2.4.2.3. To rationalize the stereochemical outcome of these syn aldol products, boat-like transition state 152 was proposed. There are also other examples of syn aldol product formation from titanium E-enolates [53]. Mahrwald reported aldol reactions of ketone enolates with aldehydes in which the reaction was conducted with equimolar amounts of titanium(IV) alkoxides and a-hydroxy acids [54]. This provided aldol products with high syn diastereoselectivity, as shown in Table 2.27. Among a variety of alkoxides and a-hydroxy acids examined, the use of Ti(Ot-Bu)2 -BINOL and (R)mandelic acid resulted in high syn diastereoselectivity and aldol products were obtained in enantiomerically enriched form. Other a-hydroxy acids such as tartaric acid or lactic acid resulted in very low enantioselectivity (18–24%). The influence of the chirality of BINOL
93
2 The Development of Titanium Enolate-based Aldol Reactions
94
Tab. 2.26
syn Aldol reactions using chiral titanium enolates. O
OLi
LDA
O
RCHO O
O
O
OH R
151
150 146 H H
TiLn
R
Ti
O
RCHO
O
O
OR* OR*
H 3C
O O
152
O
OH
O
R
153 Entry
R
Yield (%)
153:151
1 2 3 4
i-Pr CH2 bCMe Ph Pr
76 61 82 87
94:6 96:4 96:4 92:8
Tab. 2.27
syn-Selective aldol reactions. O RCHO
O
OH
BINOL=Ti(Ot-Bu)2
+
R (R)-mandelic acid
154 Entry
R
Yield (%)
syn:anti
ee (syn) (%)
1 2 3 4
Ph t-Bu PhCcC i-Pr
71 55 72 48
95:5 85:15 73:27 89:11
93 87 94 83
2.4 Addition of Enolates with a-Substituents to Aldehydes
95
Tab. 2.28
syn-Selective aldol reactions of chiral a-silyloxyketones. O
OH
R1 O
R1 H
H
R2
O O
155
OTBS
L
L
R1 OTBS
R2
H
TBSO
157
L
Ti
O L
+
OH
R1
R2 OTBS
156
158 Entry
R1
R2
Methoda
Yield (%)
157:158
Ref.
1 2 3 4 5 6
Cyclohexyl Cyclohexyl Cyclohexyl Cyclohexyl Me Bn
Ph i-Pr Ph i-Pr i-Pr i-Pr
A A B B C C
– – – – 90 85
99:1 >99:1 99:1 99:1 97:3 97:3
55 55 56 56 57 57
a Method
A: LDA, Ti(Oi-Pr)3 Cl, R2 CHO; Method B: LDA, Ti(Oi-Pr)4 , R2 CHO; Method C: TiCl 4 , i-Pr2 NEt, R2 CHO
was insignificant. Although the mechanism of this reaction is unclear, ligand exchange between t-BuOH and a-hydroxy acids is evident from NMR analysis and might be necessary for the syn diastereoselectivity and enantioselectivity observed. Synthesis of Optically Active syn Aldols with Chiral Enolates Thornton and Siegel have reported that reactions of the titanium enolates of chiral a-silyloxyketones resulted in excellent syn diastereoselectivity, as shown in Table 2.28, entries 1–4 [55, 56]. Use of tetrakisisopropoxytitanium enolates also afforded excellent syn diastereoselectivity. In work similar to that with oxazolidinone chiral auxiliaries, these enolates were generated as lithium enolates then transmetalated with the appropriate titanium Lewis acid. Large excesses of titanium were necessary for good stereoselectivity. They also noted that carboxylic acid derivatives could be obtained by deprotection and oxidative cleavage. Chiral auxiliary methods are, however, more efficient at providing adducts of this nature. Urpı´ and coworkers demonstrated that a variety of directly generated titanium enolates of a-silyloxyketones reacted with aldehydes to give syn aldols with excellent yield and selectivity, as shown in Table 2.28, entries 5–6 [57]. The selectivity of these reactions can be explained by the transition state assembly 156. Between the O-benzyl derivative and the OTBS protected ketones, the latter provided excellent yield and syn–syn diastereoselectivity. 2.4.1.4
2 The Development of Titanium Enolate-based Aldol Reactions
96
Tab. 2.29
Reactions of b-ketoimide enolates. O
O
O
OH
X O
Me O
O
O
O
H
b) i-Pr2NEt O
N
R
a) TiCl4
c) RCHO H
Bn
159
R Me
O O
Bn
L
H
N
161 L
Ti
O
O
+
O
OH
L O
160
R
N Bn
162 Entry
R
Yield (%)
161:162
1 2 3 4
i-Pr CH2 bCMe Et Ph
86 64 86 81
>99:1 95:5 >99:1 96:4
The steric bulk of the silyloxy group prohibits it from effectively chelating titanium, so the products arise from the non-chelated transition state. Much work in the field of aldol reactions of ketones was performed by Evans to enable the synthesis of polypropionate natural products. They demonstrated that b-ketoimides like 159 were selectively and completely enolized at the C4 position rather than the potentially labile methyl-bearing C2 position, most probably because steric factors prohibited alignment of the carbonyl groups necessary to activate the C2 proton. As shown in Table 2.29, it was demonstrated that these compounds would react with aldehydes to provide syn–syn product 161, via titanium enolates, with good yield and excellent selectivity, and the corresponding syn–anti product 162 could be favored by use of a tin enolate reaction [58]. They invoked the chelated transition state assembly 160 to explain the product stereochemistry observed, in which the C2 -methyl group directs diastereofacial selectivity. Interestingly, reduction with Zn(BH4 )2 provided the syn diol diastereoselectively. Evans also investigated the stereochemical influence of two adjacent stereogenic centers in the titanium enolate-based aldol reaction [28]. As shown in Scheme 2.13, asymmetric induction of the enolate resulted from the influence of the a-stereocenter; the b-stereogenic center has very little effect. Subsequently, Evans examined double-stereodifferentiating titanium enolate aldol reactions [59]. Both the aldehyde and the enolate contained a and b stereogenic centers. In aldol reactions between these substrates the enolate can adopt either a matched or mismatched relationship with the aldehyde. Several possible scenarios were investigated. As shown in Scheme
2.4 Addition of Enolates with a-Substituents to Aldehydes OTBS O
OTBS O
Ti Ln
OTBS O
i-PrCHO
a) TiCl4
97
OH
b) i-Pr2NEt
163
164 96 : 4 dr (96%)
OTBS O
OTBS O a) TiCl4
Ti Ln
OTBS O
i-PrCHO
OH
b) i-Pr2NEt
166 95 : 5 dr (82%)
165 Scheme 2.13
syn-Selective aldol reactions of chiral ketones.
2.14, when the ketone enolate and aldehyde were chirally fully matched (168) or partially mismatched (169 and 170), syn diastereoselectivity was quite good. The diastereoselectivity was poor only in the completely mismatched case (171). O
OPMB OTBS O
OTBS O
OH
OPMB
H
167
O
a) TiCl 4
OPMB
168
89 : 11 dr (86%)
OTBS O
OH
OPMB
H
b) i-Pr2NEt OTBS O
TiLn O
OPMB
169
87 : 13 dr (81%)
OTBS O
OH
H
170 O
OPMB
92 : 8 dr (85%)
OPMB OTBS O
OH
OPMB
H
171 Scheme 2.14
Double stereodifferentiation in syn aldol reaction. ( a 28% of an anti diastereomer also isolated.)
37 : 35 : 28 dra (79%)
98
2 The Development of Titanium Enolate-based Aldol Reactions
2.4.2
Anti Diastereoselectivity
As can be seen from the developments described above, the control of both relative and absolute acyclic stereochemistry in a variety of syn aldol reactions can now be achieved highly stereoselectively. Both boron and titanium enolate-based syn aldol reactions have gained widespread popularity and are frequently used in synthesis. Whereas anti-a-alkyl-b-hydroxycarbonyl units are inherent to numerous bioactive natural products, there are relatively few effective synthetic processes that are convenient, operationally simple, and afford high diastereoselectivity for a wide range of aldehydes. Early examples of anti-selective aldol reactions, reported by Meyers in 1984, were based upon oxazoline-derived boron enolates [60]. Several other methods based upon metal enolates other than titanium have subsequently been developed. In this chapter, however, we will focus on titanium enolate-based methods. Synthesis of anti Aldols in Racemic Form Procter et al. reported a novel anti-selective aldol process using titanium enolates of N-propionylpyrrolidine [61]. The aldol products were obtained in good yield and anti diastereoselectivity. The aldolates were produced in racemic form, however. As shown in Table 2.30, formation of the titanium enolate of 172 was achieved by transmetalation of the lithium enolate with Cp2 TiCl2 in THF. The resulting titanium enolate reacted with a range of aldehydes. Interestingly, the lithium enolate of 172 has stereoselectivity and the corresponding zirconium enolate afforded syn diastereoselectivity. 2.4.2.1
Tab. 2.30
anti-Selective aldol reactions of N-propionylpyrrolidine. O
OH
N
R
OTiCp 2Cl
O a) LDA N
N
173 RCHO
+
b) Cp2TiCl 2
O
172
OH
N
R
174 Entry
R
Yield (%)
173:174
1 2 3 4
Et i-Pr Ph MeCHbCH
65 64 68 77
79:21 87:13 98:2 90:10
2.4 Addition of Enolates with a-Substituents to Aldehydes Tab. 2.31
anti Aldol reactions of phenyl benzyloxythioacetate with respective aldehydes. OH
O H Bn OBn
177
O Ti O
L
175
OBn
SPh
O
PhS
L
R
PhS
R
O
+ OH
O
L
176
R
PhS OBn
178
Entry
R
Yield (%)
177:178
1 2 3 4
Me n-Pr t-Bu Ph
99 97 81 99
97:3 98:2 98:2 98:2
Cinquini and Cozzi reported the synthesis of racemic anti-a,b-dihydroxy thiolesters by aldol reaction of aldehydes with a-benzyloxythiolester-derived chlorotitanium enolates [62]. The thiolester was enolized by treatment with TiCl 4 and Et3 N in CH2 Cl2 at 78 C and the resulting enolate was reacted with a variety of aldehydes at 78 C providing anti aldol products with good to excellent anti diastereoselectivity, as shown in Table 2.31. The stereochemical outcome can be explained by boat-like model 176 in which the thiolester formed an E enolate presumably by chelation through the benzyloxy group. Kazmaier reported the synthesis of several racemic a-aminoaldols in which the a-amino group and the b-hydroxyl group are anti [63]. Reactions of N-benzyloxycarbonyl amino acid ester enolates with a variety of aldehydes afforded moderate to good yields and good to excellent diastereoselectivity, as shown in Table 2.32. Titanium enolates were generated by deprotonation of 179 with LDA in THF followed by the addition of 2 equiv. Ti(Oi-Pr)3 Cl in THF at 78 C. 2.4.2.2
Synthesis of Optically Active anti Aldols by Use of Chiral Auxiliaries
Aminoindanol and Related Chiral Auxiliaries Ghosh and coworkers developed novel highly diastereoselective anti aldol methods based on ester-derived titanium enolate aldol reactions [64–66]. The utility of the cis-1-toluenesulfonamido-2-indanol-derived chiral auxiliary was demonstrated. This chiral auxiliary is readily prepared from commercially available enantiomerically pure cis-1-amino-2-indanol. Both enantio2.4.2.2.1
99
100
2 The Development of Titanium Enolate-based Aldol Reactions Tab. 2.32
Synthesis of sterically demanding a-aminoaldols. a) LDA
O
O t-BuO
OH
O
OH
b) Ti(Oi-Pr)3Cl
NHCO2Bn
t-BuO c) R2CHO
R1
R2 R1
t-BuO
NHCO2Bn
R2 R1
180
179
NHCO 2Bn
181
Entry
R1
R2
Yield (%)
180:181
1 2 3 4
i-Pr i-Pr Me Et
t-Bu i-Pr i-Pr i-Pr
70 87 87 85
97:3 92:8 92:8 95:5
mers of the chiral auxiliary are, furthermore, readily available, enabling synthesis of either enantiomer of the anti aldol. As shown in Scheme 2.15, ester 183 was readily enolized with titanium tetrachloride and diisopropylethylamine. First it was treated with TiCl 4 in CH2 Cl2 at 0 C. After stirring at 23 C for 15 min, i-Pr2 NEt was added. Evans reported that alkyl esters cannot be enolized with TiCl 4 and amine bases [28]. Smooth enolization of sulfonamidoesters is presumably because of internal chelation with the sulfonamido group, as was recently documented by Xiang et al. [48].
TsNH
NH2
O 1) TsCl OH
2) EtCOCl
182
O
183 a) TiCl4 b) i-Pr2NEt
H3 C L L
L O Ti L O
H H O H
N
L L
L O
S
O
CH3
L O Ti
O H
N S
O
184 Scheme 2.15
Enolization of N-tosylaminoindanol esters.
185
2.4 Addition of Enolates with a-Substituents to Aldehydes
101
TsNH L L O
L
184
Ti
Ti
L
L O
i-BuCHO
O
TiCl 4
L
N
O
O
OH
O
OH
O
L
187
L
+
S TsNH
O
O
186 188 Scheme 2.16
Aminoindanol-derived anti aldol reaction.
Although treatment of enolate 184 with isovaleraldehyde produced no reaction, addition of the enolate to a solution of isovaleraldehyde precomplexed with TiCl 4 provided the anti aldol product 187 in 97% yield as a single isomer (by HPLC and 1 H NMR) as shown in Scheme 2.16. Reaction with several other aldehydes also produced the anti isomer as the major product. It should be noted that of four possible diastereomers, only one syn and one anti product were observed in this reaction. The anti:syn selectivity ranged from 85:15 to >99:1 and yields ranged from 41–97%, as shown in Table 2.33. Whereas benzaldehyde resulted in very little to no selectivity under these conditions, in the presence of an additive there was a dramatic improvement in anti diastereoselectivity. Thus, aldol reaction of the enolate of 189 with benzaldehyde (2 equiv.) precomplexed with TiCl 4 (2.2 equiv.) in the presence of CH3 CN additive (2.2 equiv.) afforded anti alTab. 2.33
anti-Selective asymmetric aldol reactions. TsNH O
a) TiCl4
TsNH
TsNH
O
O
OH
OH
b) i-Pr2NEt O
189
c) RCHO TiCl4
R +
O
190
O
191
Entry
R
Yield (%)
190:191
1 2 3 4 5 6 7
i-Bu Me Pr i-Pr MeCHbCH PhCHbCH Ph
97 50 74 91 41 63 85
>99:1 85:15 95:5 85:15 95:5 99:1 45:55
R
102
2 The Development of Titanium Enolate-based Aldol Reactions a) TiCl4
TsNH
TsNH
O
O
OH
b) i-Pr2NEt O
TiCl 4
192
a) TiCl4
TsNH
O
c) i-BuCHO
193 (20.5 : 5.8 : 1 dr) TsNH O
O
OH
b) i-Pr2NEt O
O
c) i-BuCHO TiCl4
194
a) TiCl4
MsNH
195 (1 : 1 dr) MsNH O
O
OH
b) i-Pr2NEt O
196
c) i-BuCHO TiCl4
O
197 (70 : 30 dr)
Scheme 2.17
Structure–reactivity relationship studies in anti aldol reactions.
dol product stereoselectively (96:4) in good yield. These conditions, however, did not improve the yield or selectivity for reactions with aliphatic aldehydes. The anti selectivity can be rationalized by using a novel Zimmerman– Traxler type transition state 186. In this transition state, both the methyl group of the enolate and the alkyl group of the aldehyde adopt pseudoequatorial positions, leading to the anti product. Several structural features have been shown to be critical for the high selectivities observed. First, reaction of dimethylphenylglycinol-derived auxiliary 192 with isovaleraldehyde provided a 20.5:5.8:1 ratio of isomers, as shown in Scheme 2.17. The major isomers are thought to be the two anti diastereomers. Removal of the indane aromatic ring resulted in complete loss of diastereoselectivity. Thus, reaction of the corresponding 1,2aminocyclopentanol derivative 194 with isovaleraldehyde resulted in a 1:1 mixture of syn and anti diastereomers. The use of the mesylate derivative 196 also resulted in a large loss of selectivity. The reaction of N-mesylaminoindanol derivative 196 with isovaleraldehyde provided a 70:30 mixture of anti and syn diastereomers. These results suggest a possible p-stacking interaction between the two aromatic rings. The result of this interaction would be to help stabilize the conformation shown in enolate 184, although this interaction has not been rigorously established. Double stereodifferentiation experiments with matched chiral aldehyde 199 provided anti aldol 200 as a single diastereomer, as shown in Scheme 2.18 [67].
2.4 Addition of Enolates with a-Substituents to Aldehydes a) TiCl 4
TsNH O
TsNH
O
OH
b) i-Pr2NEt O
O c) TiCl4, O
198
200 (>99 : 1 dr)
H
199 Scheme 2.18
Double stereodifferentiation in aminoindanol-derived anti aldol reaction.
On the basis of these structure–reactivity studies, Ghosh and Kim subsequently speculated that the planarity of the acenaphthene ring in conjunction with its aromaticity might further enhance p-stacking interactions with the arylsulfonamide functionality [68]. In this context, an effective synthesis of both enantiomers of cis-2-amino-1-acenaphthenol from acenaphthylene was developed. Enolization of 202 using TiCl 4 and i-Pr2 NEt provided a single enolate, presumably the Z enolate. Reaction of this enolate with isovaleraldehyde precomplexed with TiCl 4 resulted in significantly reduced anti diastereoselectivity (78:22), however. Similar to the aminoindanol chiral auxiliary, reactions with the acenaphthene-derived auxiliary produced only one anti and one syn diastereomer. Interestingly, aldol reaction of the enolate of 202 with aldehydes (2 equiv.) precomplexed with TiCl 4 (2.2 equiv.) in the presence of CH3 CN (2.2 equiv.) resulted in excellent anti diastereoselectivity and yield for a wide range of aldehydes, as shown in Table 2.34. Oxazolidinethione and Oxazolidineselone Chiral Auxiliaries Silks and coworkers reported anti-selective aldol reactions in conjunction with their investigations on chiral selenium compounds [39]. They discovered that bidentate oxyaldehydes precomplexed with TiCl 4 led to anti aldol products in good yield and with excellent stereoselectivity, as shown in Table 2.35, entries 1 and 2. Presumably, this chelation-controlled reversal of syn/anti selectivity is a phenomenon similar to that which Ghosh and coworkers exploited to produce syn aldols from aminoindanol chiral auxiliaries. Both benzyl and isopropyl oxazolidineselone chiral auxiliaries have comparable anti diastereoselectivity. Crimmins and McDougall demonstrated that protected glycolyloxazolidinethiones underwent aldol reactions with aldehydes to provide anti aldol products [69]. Moderate to good yields and good to excellent anti selectivity were observed for a wide range of reactions, as shown in Table 2.35, entries 3–8. To achieve anti selectivity, it is necessary to complex the aldehydes with TiCl 4 before addition of the enolate. Comparing their results with those of Silks, it seems that the a-oxy substituent on the enolate is a less powerful anti director than an oxygen substituent on the aldehyde. 2.4.2.2.2
103
104
2 The Development of Titanium Enolate-based Aldol Reactions Tab. 2.34
Acenaphthene-derived anti aldol reactions with respective aldehydes. TsNH OH
O TsNH O
a) TiCl 4
R
O
b) i-Pr2NEt
203
O c) RCHO, TiCl4, TsNH CH3CN
201
OH
O
202
R
O
204 Entry
R
Yield (%)
203:204
1 2 3 4 5 6
i-Bu Et i-Pr cyclohexyl Ph PhCH2 CH2
95 92 95 84 93 97
97:3 92:8 96:4 99:1 93:7 95:5
Synthesis of Optically Active anti Aldols by Use of Chiral Titanium Ligands Duthaler reported the synthesis of optically active anti aldols by use of the chiral CpTi(DAGO)2 complex [70]. They reported moderate yields and 2.4.2.3
Tab. 2.35
anti-Selective aldol reactions involving oxazolidinethione and oxazolidineselone auxiliaries. X O
O
X R2CHO
N
O
OH
O
R2 + O
N
R1
X
OH
O
R2
N R1
R1 Bn
Bn
Bn
205
R2 + O
N
R1
Bn
X
OH
O
206
207
208
Entry
X
R1
R2
Yield (%)
206:207:208
Ref.
1 2 3 4 5 6 7 8
Se Se S S S S S S
Me Me OCH2 CHbCH2 OCH2 CHbCH2 OCH2 CHbCH2 OBn OBn OMe
BnOCH2 BuOCH2 Me i-Pr Ph CH3 (CH2 )4 CHbCH2 Me
100 81 84 61 56 64 48 62
>99:0:1 >99:0:1 94:6:0 87:13:0 65:24:11 88:12:0 74:26:0 86:4:10
39 39 69 69 69 69 69 69
2.5 Natural Product Synthesis via Titanium Enolate Aldol Reactions Tab. 2.36
Stereoselective synthesis of anti aldols using chiral titanium Lewis acids. O
a) LDA
O
O
OH
O
b) CpTi(DAGO) 2Cl O
R
+
O
OH R
c) RCHO
209
211
210
Entry
R2
Yield (%)
210:211
1 2 3 4
Pr t-Bu CH2 bCMe Ph
74 59 50 73
89:11 83:17 54:46 23:77
good diastereoselectivity for a range of aldehydes when reacted with 2,6dimethylphenyl propionate derived titanium enolate, as shown in Table 2.36, entries 1 and 2. The method provided no selectivity (entry 3) or syn selectivity (entry 4), however, when the aldehyde was unsaturated and substituted. The corresponding N-propionyl-1,3-oxazolidin-2-one provided good selectivity with isobutyraldehyde (88:12 anti/syn) but poor yield, because of the formation of byproducts.
2.5
Natural Product Synthesis via Titanium Enolate Aldol Reactions
Numerous applications of titanium enolate aldol reactions have been reported for the synthesis of natural products and bioactive compounds of pharmaceutical interest. These syntheses were performed by utilizing the titanium enolate methods described above as key steps. There are many transformations that simply cannot be achieved by use of conventional aldol chemistry. Furthermore, the use of inexpensive titanium reagents, operational simplicity, and functional group tolerance make this chemistry very attractive in synthesis. The following applications in synthesis further exemplify the increasing importance of titanium aldol chemistry. 2.5.1
Lactone Natural Products
Asymmetric syn and anti aldol reactions have been used for synthesis of the following natural products containing lactone moieties. A titanium enolatebased aldol reaction has also been utilized in the aldol dehydration sequence during the synthesis of pyrone natural products mxyopyronin A and B. The following syntheses of lactone-containing natural products highlight the variety of aldol transformations.
105
106
2 The Development of Titanium Enolate-based Aldol Reactions
Tetrahydrolipstatin Ghosh and Fidanze reported a synthesis of tetrahydrolipstatin (217) in which the anti stereochemistry of the b-lactone moiety is set by using asymmetric anti aldol methodology, discussed in Section 2.4.2.2.1 [71]. Tetrahydrolipstatin is a saturated analog of the natural product lipstatin, isolated from Streptomyces toxytricini. It is a potent and irreversible inhibitor of pancreatic lipase and has been marketed in several countries as an anti-obesity agent under the trade name Xenical. Aldol reaction between the enolate of 212, generated with TiCl 4 and i-Pr2 NEt, and cinnamaldehyde precomplexed with Bu2 BOTf gave 213 in 60% yield as a 6.1:1 mixture of anti and syn diastereomers, as shown in Scheme 2.19. Aldol adduct 213 was converted to the benzyl ester 214, which was reduced selectively to the anti 1,3-diol by use of Evans’ procedure [72] and protected as the triisopropylsilyl ether 215. Hydrogenation of the O-benzyl group over Pearlman’s catalyst and lactonization with phenylsulfonyl chloride in pyridine gave the b-lactone 216 which, on deprotection and reaction with N-formyl-l-leucine under Mitsunobu conditions, afforded ()-tetrahydrolipstatin. 2.5.1.1
Myxopyronins A and B Panek and coworkers developed syntheses of myxopyronin A (220a) and myxopyronin B (220b) in which an aldol reaction was used to append the 2.5.1.2
TsNH
TsNH
O
O
OH
i
TiCl 4, Pr2NEt O
O
212
C6H13
Bu2BOTf, PhCH=CHCHO
Ph C6H13
213
(60%) ref. 71
OH
O
OTIPS C11H23
BnO C6H13
215
OH
O
C11H23
BnO 2) TIPSOTf, 2,6-lutidine (96%)
C6H13
1) H2/Pd(OH)2 (99%)
O
O OTIPS
1) Bu4NF(70%)
O
O
2) PPh3, DIAD, N-formyl-L-leucine
216 Scheme 2.19
Synthesis of ()-tetrahydrolipstatin.
(90%)
214
H N
H
2) PhSO2Cl, pyr (74%) O
O
1) Me4NHB(OAc)3 (94%)
217
O
O
2.5 Natural Product Synthesis via Titanium Enolate Aldol Reactions O
OH
O
O
CO2Me
218 TiCl4, ,i-Pr 2NEt,
CHO
R
R = Pr : 58% R = Bu: 61% O
OH
O
O
R CO 2Me
219 ref. 73
O
OH
O
O
R
H N
CO 2Me
220a: R = Pr 220b: R = Bu Scheme 2.20
Myxopyronin A and B synthesis.
hydrophobic side chain [73]. The myxopyronins are natural products isolated from the gliding bacterium Myxococcus fulvus MX f50. These molecules are bacterial growth inhibitors, because of their capacity to selectively inhibit bacterial RNA polymerase. Aldol condensation of ketone 218-derived titanium enolate and subsequent elimination provided diene 219, as shown in Scheme 2.20. Attachment of the other side chain provided myxopyronins A and B. Callystatin A Crimmins and King reported a total synthesis of callystatin A (228) using their aldol methodology (as discussed in Section 2.4.1.2.1) to construct three of the four chiral centers in the molecule [74]. Callystatin A is a natural product, isolated from the marine sponge Callyspongia truncata, which has potent in-vitro toxicity against KB cell lines (IC50 ¼ 0.01 ng mL1 ). Phenylalanine-derived N-propionyloxazolidethione 221 was subjected to enolization with TiCl 4 and ()-sparteine using Crimmins’ procedure and reacted with (S)-2-methylbutanal to provide syn aldol adduct 222 in 83% yield with 98% selectivity, as shown in Scheme 2.21. Protection of the alco2.5.1.3
107
108
2 The Development of Titanium Enolate-based Aldol Reactions
Bn
1) TBSOTf
Bn TiCl4, (-)-sparteine
O
N
2) LiBH4 O
H
N 3) Swern ox.
O
S
221
H
S
O
OH
O
OTBS
(83%)
223
222
O (83%, 98:2)
TiCl4,(-)-sparteine
Oi-Pr
221 O
(81%, 98:2)
226
KOt-Bu
Bn
ref. 74
CHO BrBu3P
O TMSO
(90%) Oi-Pr
OTBS
N S
O
OH
OTBS
224
225
O
TMSO O
OTBS 1) PPTS, H2O
227
2) TPAP O
3) HF-pyr (43%)
228
O
OH
Scheme 2.21
Synthesis of ()-callystatin A.
hol as the TBS ether, reductive removal of the chiral auxiliary, and Swern oxidation furnished aldehyde 223. Aldol reaction under similar conditions with oxazolidethione 221 gave the all-syn product 224 in 81% yield with 98% selectivity; this was then converted to 225. Wittig olefination with fragment 226 (synthesized from (S)-glycidol) gave olefin 227 which, on removal of the OTMS and isopropyl acetal protecting groups, perruthenate oxidation, and deprotection of the OTBS group gave ()-callystatin A. AI-77-B Ghosh and coworkers developed a convergent synthesis of ()-AI-77-B (237) in which all five stereogenic centers were set by asymmetric synthesis [75]. 2.5.1.4
2.5 Natural Product Synthesis via Titanium Enolate Aldol Reactions
109
As in their previous work [76], four of those chiral centers were set using the aminoindanol-based syn and anti aldol methods discussed in Sections 2.4.1.2.3 and 2.4.2.2.1, respectively. AI-77-B is a natural product isolated from Bacillus pumilus with potent antiulcerogenic and anti-inflammatory properties. Anti aldol reaction of 229-derived titanium enolate with 4,4,4trichlorobutryaldehyde gave adduct 230 in 90% yield with 90% de; this was subsequently transformed to isocoumarin fragment 231, as shown in Scheme 2.22. Aldol reaction of 232-derived titanium enolate with benzyloxyacetaldehyde
OMe O TsNH
TsNH
O
O
OH
TiCl4, i-Pr2NEt O
O
OH
TiCl4, i-Pr2NEt O
231
230 TsNH
O
OBn OBn
O
ref. 75 HO 2C
BnOCH2CHO
232
Boc
ref. 75
(90%, 90%de)
TsNH
H N
O
Cl3(CH2)2CHO
229
O
CCl3
233
(97%)
NBoc O
234 a) TFA
b) 231, EDCI, DMAP (72%) OMe O
OMe O O
OBn
H N
CO 2Bn
NBoc
2) H2 / Pd-C DOWEX 50-X8 (75%)
O O
OH
H N O
Scheme 2.22
AI-77B synthesis.
NH2 CO 2H
237
OH
3) CsCO3, BnBr (90%)
OBn
H N
NBoc O
O
235
236 1) MgI2 (93%)
OH
O 2) NaClO2 (99%)
O
O
1) O3, PPh3 (98%)
110
2 The Development of Titanium Enolate-based Aldol Reactions
provided syn adduct 233 in 97% yield as a single product; this was transformed into carboxylic acid 234 via Curtius rearrangement, stereoselective homologation after Dondoni’s procedure [77] and functional group manipulation. Deprotection of 231 and coupling with EDCI and DMAP gave amide 235. The allyl group was converted to benzyl ester 236 which, on demethylation with MgI2 and concomitant hydrogenolysis of the O-benzyl groups and isopropylidine deprotection, gave AI-77B. Key steps included stereoselective ester-derived asymmetric syn and anti aldol reactions, a regioselective Diels–Alder reaction, and Dondoni homologation. 2.5.2
Macrolide Natural Products
Titanium enolate aldol reactions have been used in the syntheses of several of important antitumor macrolides and of the immunosuppressive macrolide rapamycin. Duthaler’s titanium enolate acetate aldol reaction was used in the synthesis of epothilone 490. A variety of titanium enolate-based syn aldol reactions highlight the scope and utility of this technique. Epothilone 490 Danishefsky and coworkers reported a concise, convergent synthesis of epothilone 490 (243) with a key late-stage acetate aldol reaction [78]. Epothilone 490 is a natural product isolated from the cellulose-degrading bacterium Sorangium cellulosum which has potent Taxol-like microtubule-stabilizing induced cancer cytotoxicity. Known vinyl iodide 238 [79] was subjected to Stille coupling and acetylation to give acetate ester 239. Reaction with previously synthesized aldehyde 240 [80] using to Duthaler’s titanium enolate aldol method (discussed in Section 2.3.2) gave aldol 241 in 85% yield as a single diastereomer (Scheme 2.23). Deprotection of the OTroc group using zinc in acetic acid followed by ring closing metathesis using the Grubbs second generation catalyst 242 yielded epothilone 490 in 64% yield. 2.5.2.1
Cryptophycin B Ghosh and Bischoff reported an efficient and convergent synthesis of cryptophycin B (249) using their aminoindanol-derived syn aldol methodology (discussed in Section 2.4.1.2.3) [81]. Cryptophycin B (249), a marine natural product isolated from Nostoc sp. GSV 224, has potency at the picogram level against KB cells. Unsaturated ester 244-derived titanium enolate was subjected to an aldol reaction with 3-benzyloxypropionaldehyde to give syn product 245 in 98% yield as a single diastereomer, as shown in Scheme 2.24. Reductive removal of the chiral auxiliary then deoxygenation of the primary alcohol and protection of the remaining secondary alcohol furnished silyl ether 246. Conversion of the benzyloxy functionality to the a,bunsaturated ester moiety was accomplished by selective OBn deprotection, PCC oxidation, and Horner–Emmons olefination to yield ester 247 which 2.5.2.2
2.5 Natural Product Synthesis via Titanium Enolate Aldol Reactions 1) Pd2dba3, PPh3 S
S O
CH2=CHSnBu3 (96%)
OTES N
111
N O
2) Bu4NF (92%)
238
239
3) Ac2O, Et 3N, DMAP (98%) I
a) LDA, Et2O b) CpTi(OR)2Cl c) O
O
OTroc
H
240
(85%) O
O
S
OH
1) Zn, AcOH (86%) 2) MesN
N
Cl O OH
243
Cl
(64%) NMes Ru PCy3
O S
OH N
242 O
Ph
OTroc
241
Scheme 2.23
Epothilone 490 synthesis.
was converted to compound 249. Exposure to trifluoroacetic acid to remove the N-Boc and O-tert-butyl protecting groups, then Yamaguchi cycloamidation gave the macrocycle which, on selective epoxidation with dimethyldioxirane, gave cryptophycin B in 22% overall yield over fourteen steps. Amphidinolide T1 Ghosh and Liu reported the first total synthesis of amphidinolide T1 (258), setting four of the seven stereogenic centers with their asymmetric aldol methodology (discussed in Section 2.4.1.2.3) [82]. Amphidinolide T1 is a marine natural product isolated from Amphidinium sp. with significant antitumor properties against a variety of cell lines. Aldol reaction of ester 250 with 3-benzyloxypropionaldehyde gave syn adduct 251 in 90% yield as a single diastereomer, as shown in Scheme 2.25. Ester 251 was then converted into tetrahydrofuran derivative 252 via Wittig olefination and olefin cross-metathesis. Aldol reaction of ester 253 with benzyloxyacetaldehyde gave exclusively syn aldol adduct 254 in 93% yield; this was transformed into alkene 255. Subsequent transformation yielded tetrahydrofuran derivative 256. This cyclic bromoether serves as masked functionality for the labile exocyclic 2.5.2.3
O
2 The Development of Titanium Enolate-based Aldol Reactions
112 TsNH
TsNH
O
OH
O TiCl4, i-Pr2NEt
O 98%
244
OBn
O
BnO(CH2)2CHO
245
Ph
Ph
1) LiAlH4 (92%) 2) PhLi, TsCl, LiAlH4 (96%) 3) TIPSOTf, 2,6-lutidine (99%) 1) K2CO3, BBr3 (83%) 2) PCC (98%) Ph
CO 2Et
3)
OTIPS
O
(EtO) 3PC
247
OBn
Ph OTIPS
CO 2Et
246
NaH (92%) ref. 81
Ph
O
Ph O
O
1) TFA
O
t-BuO HN
O
O
2) Yamaguchi
HN
O
O O
O
248
3) O OMe
O
(87%, 3:1)
HN
O
O
N H
O
OMe
249
Boc
Scheme 2.24
Cryptophycin B synthesis.
methylene group in the final product. Stereoselective oxocarbenium ionmediated alkylation using a modification of Ley’s procedure [83] with DTBMP and AlCl3 gave coupled product 257 in 73% yield as a single diastereomer. Deprotection of the alcohol and ester moieties followed by Yamaguchi macrolactonization, and treatment with zinc and ammonium chloride afforded amphidinolide T1. Key steps included stereoselective aminoindanol-derived asymmetric aldol reactions, efficient olefin crossmetathesis, stereoselective oxocarbenium ion-mediated anomeric alkylation, and the use of the cyclic bromomethyl ether as a novel exo-methylene group surrogate. Rapamycin Danishefsky and coworkers published a total synthesis of rapamycin (260) using a novel aldol macrocyclization reaction as the key step [84]. Rapamycin is a natural product with immunosuppresive properties. The conclusion 2.5.2.4
2.5 Natural Product Synthesis via Titanium Enolate Aldol Reactions
SO2Ph
TsNH
TsNH
O
O
OH
TiCl4, i-Pr2NEt BnO(CH2)2CHO (90%)
250
O
O O
TiCl4, i-Pr2NEt
OTBS
OBn
OH ref. 82 BnO
255
254
(93%)
CO2Bn
252
O
BnOCH2CHO
253
BnO
251 TsNH
TsNH
O
ref. 82
O
O
113
OTIPS
ref. 81 Br Br
DTBMP O O
O 1) HF-pyr (87%)
TBSO
OTBS
AlCl3, 252 O
(73%) OTBS
CO2Bn 257
2) H2/Pd-C 3) Yamaguchi (71%) OH 4) Zn, NH4Cl (61%) O
O O
O
258 Scheme 2.25
Amphidinolide T1 synthesis.
of the synthesis treats late-stage intermediate aldehyde 259 with isopropoxytitanium trichloride in the presence of triethylamine to generate the cyclized product in 11% yield, with 22% of another isomer (possibly the syn aldol product), as shown in Scheme 2.26. Deprotection of the TIPS ether afforded rapamycin. Spongistatins 1 and 2 Crimmins and coworkers published a convergent synthesis of spongistatin 1 (263a) and spongistatin 2 (263b), employing their phenylalanine-derived asymmetric aldol methodology (discussed in Section 2.4.1.2.1) to set one of the stereocenters [85]. Spongistatins 1 and 2 are natural products with subnanomolar growth inhibition of several NCI chemoresistant tumor types 2.5.2.5
256
114
2 The Development of Titanium Enolate-based Aldol Reactions OMe
OMe OTIPS
OH
H
N O
O H O
HO
H O
1) Ti(Oi-Pr)Cl3,
CHO
O MeO
N O
Et3N (11%) 2) HF-pyr (85%)
O
OMe
O
O
HO O
H
O H
O
O
OH MeO
O
OMe
H
259
260
Scheme 2.26
Rapamycin synthesis.
including human melanoma, lung, brain, and colon cancers. Aldol reaction of aldehyde 261 with N-propionyloxazolidinethione then reductive removal of the chiral auxiliary furnished diol 262 in 74% yield as a 96:4 ratio of stereoisomers, as shown in Scheme 2.27. This fragment was then incorporated into synthetic spongistatins 1 and 2. 2.5.3
Miscellaneous Natural Products
Several other natural products have been synthesized by using titanium enolate-based aldol methods. Many of these syntheses utilize ketone enolate aldol reactions to establish syn stereochemistry. Duthaler’s anti aldol reaction was used in the synthesis of tautomycin. Use of Evan’s ketone–aldol reaction was nicely exemplified in syntheses of denticulatin B and membrenone C. Tautomycin Chamberlin and coworkers reported a convergent synthesis of tautomycin (270), employing Duthaler’s anti aldol methodology, as discussed in Section 2.4.2.3, to set four of its stereogenic centers [86]. Tautomycin, a serine/ threonine selective protein pyrophosphatase inhibitor is selective for PP1 over PP2A. Reaction of aldehyde 265 with the enolate of 264, generated with LDA and transmetalated with Duthaler’s reagent (R ¼ diacetoneglucose) afforded compound 266 in 80% yield as an 8:1 mixture of anti and syn aldols, as shown in Scheme 2.28. Protection of the alcohol as the silyl ether and conversion of the ester gave iodide 267, which was converted to spirocyclic aldehyde 268. Aldehyde 268 which was reacted with the titanium 2.5.3.1
2.5 Natural Product Synthesis via Titanium Enolate Aldol Reactions Bn N
O BnO
BnO O
O S 1) TiCl4, (-)-sparteine
O
CHO
TESO
O
O
TESO
2) LiBH4
OH
(74% 96:4)
OH
OTES
OTES
262
261
ref. 85 OH HO HO H
O
H
H
O
O HO
O OH O
X
O H
H O
OH
OMe
O
O
H
AcO OAc OH
263a: X = CI 263b: X = H Scheme 2.27
Spongistatin 1 and 2 synthesis.
enolate of ester 264 using Duthaler’s procedure to give anti aldol adduct 269 in 67% yield as a 7:1 mixture of the anti and syn isomers. Reaction of 269 provided synthetic tautomycin. Crocacin C Chakraborty and coworkers reported a synthesis of crocacin C (276) using asymmetric aldol methodology developed by Crimmins (Section 2.4.1.2.1) to set two of the four chiral centers [87]. Crocacin C is a natural product isolated from myxobacterium Chondromyces crocatus with potent growth inhibition of Gram-positive bacteria, fungi, and yeasts. Titanium enolate aldol reaction of phenylalanine-derived N-propionyloxazolidinethione 271 with cinnamaldehyde gave the syn aldol adduct 272 in 89% yield as a single dia2.5.3.2
115
116
2 The Development of Titanium Enolate-based Aldol Reactions O
O
LDA, CpTi(OR)2Cl
O
O
OHC
266
265
264
OH
(80%, 8:1)
1) TBSOTf, 2,6-lutidine (94%) 2) DIBALH 3) I2, PPh3 (85%) OTBS
O
OHC H
ref. 86
H
I
O
268
267
LDA, CpTi(OR)2Cl
264 (67%, 7:1) O
OH
O
O H
H
O
269 ref. 86 O
OH
O
O O
O
OH
OMe
O
OH
O H
O
H O
270
Scheme 2.28
Tautomycin synthesis.
stereomer; this was converted to allylic alcohol 273, as shown in Scheme 2.29. Sharpless asymmetric epoxidation provided epoxide 274 which was opened regio- and stereoselectively with lithium dimethylcuprate to provide diol 275 in 86% yield. Diol 275 was then transformed to the final product crocacin C. Stigmatellin A Enders and coworkers developed a synthesis stigmatellin A (281) using aldol reactions to set two of the four chiral centers [88]. Stigmatellin A is a natural product isolated from bacterium Stigmatella aurantica and is one 2.5.3.3
2.5 Natural Product Synthesis via Titanium Enolate Aldol Reactions Bn
117
Bn TiCl4, i-Pr 2NEt
N O
Ph
O
N
PhCH=CHCHO
S
OH
(89%)
O
O S
272
271
ref. 87 Ti(Oi-Pr)4, (-)-DIPT, Ph
OH OMe
t-BuOOH
O
Ph
OH OMe
(93%)
274
273
Me2CuLi (86%)
Ph
OH OMe OH
275
ref. 87
Ph
CONH2 OMe OH
276
Scheme 2.29
Crocacin C synthesis.
of the most powerful electron-transport inhibitors in chloroplasts and mitochondria. Hydrazone 277 was alkylated with 3-( p-methoxyphenoxy)propyl iodide using their previously developed SAMP/RAMP methodology to provide hydrazone 278 in 80% yield with 98% de, as shown in Scheme 2.30 [89]. The chiral auxiliary was removed and the resulting ketone was subjected to an aldol reaction with benzyloxyacetaldehyde to give syn aldol adduct 279 in 64% yield as a 2:1 mixture of isomers. Ketone 279 was subjected to selective anti reduction using Evans’ procedure [72] and methylated to yield compound 280, which upon removal of the p-methoxyphenyl and benzyloxy groups gave stigmatellin A. Denticulatin B Paterson and Perkins developed a synthesis of denticulatin B (285) and its isomer denticulatin A using a late-stage aldol reaction [90]. Denticulatin B is a marine natural product isolated from the mollusk Siphoneria denticulata. Aldol coupling of ketone 282 and aldehyde 283 provided the syn aldol adduct 284 in 90% yield as a mixture of diastereomers, as shown in Scheme 2.31. Swern oxidation of the hydroxyl groups and deprotection and cyclization with HF–pyridine afforded denticulatin B in 20% overall yield over nine steps. 2.5.3.4
118
2 The Development of Titanium Enolate-based Aldol Reactions OMe N
OMe LDA
N
PMPO(CH2)3I
N PMP O
N
(80%, 98%de)
277
278
1) MMPP (87%) 2) TiCl4, i-PrNEt2 BnOCH2CHO (64%, 2:1)
OMe OMe
PMP O
O
1) Me4NHB(OAc)3 PMP O OBn (99%)
OH OBn
2) KH, MeI (77%)
280
279 ref. 88
OMe O OMe OMe MeO
O OH
281 Scheme 2.30
Stigmatellin A synthesis.
TiCl4, i-Pr2NEt
O
O
Si
t-Bu
O
H
OH
OH
283
t-Bu
282
O
284
O (90%, 83 : 17)
O t-Bu
Si
O t-Bu
1) Swern (100%) 2) HF-pyr (57%) OH H O O
O
285 OH Scheme 2.31
Denticulatin B synthesis.
OH
2.5 Natural Product Synthesis via Titanium Enolate Aldol Reactions TiCl 4, i-Pr2NEt BnO
OBn
BnO H
O
OBn O
286
O
287
OH
288 a) c-Hex 2BCl, Et3N
(70%, 95%de)
b) LiBH4 c) H2O2, pH 7 (88%, 95%de)
1) t-Bu2Si(OTf)2 2,6-lutidine (72%) H
H O
O
Si
t-Bu
O
O
t-Bu
290
2) H2/Pd-C (85%)
BnO
3) PCC (61%)
OBn OH
OH
289
TiCl 4, i-Pr2NEt 3-pentanone (90%, 90%de) O
1) Swern (100%) O 2) HF-pyr O
OH
O t-Bu
Si
O
OH
291 t-Bu
O
O
O
3) TFA (52%)
292
Scheme 2.32
Membrenone C synthesis.
Membrenone C Perkins and Sampson developed syntheses of membrenone C (292) and its isomers to establish the absolute configuration of the natural product [91]. Membrenone C is a natural product isolated from the skin of a Mediterranean mollusk. Aldol reaction of the stereochemically matched chiral ketone 286 and protected (R)-3-hydroxy-2-methylpropionaldehyde 287 gave aldol adduct 288 in 70% yield and 95% de, as shown in Scheme 2.32. Synselective reduction of the ketone was accomplished by using a modification of Narasaka’s procedure [92] to give diol 289 in 88% yield and 95% de. Protection of the diol as the cyclic silyl acetal followed by hydrogenolysis of the O-benzyl groups and PCC oxidation afforded dialdehyde 290. Double aldol reaction with 3-pentanone gave compound 291 with nine contiguous chiral centers in 90% yield and 90% de. The synthesis was completed by Swern oxidation of the free hydroxyl groups, removal of the silyl protecting group, and cyclization in the presence of trifluoroacetic acid. 2.5.3.5
119
120
2 The Development of Titanium Enolate-based Aldol Reactions
2.6
Typical Experimental Procedures for Generation of Titanium Enolates 2.6.1
Experimental Procedures Titanium Enolate Formation by Transmetalation, Synthesis of syn Aldols (Thornton’s Procedure, Section 2.4.1.2.1). The lithium enolate was generated at 78 C with LDA in ether. Ti(Oi-Pr)3 Cl (1–3 equiv.) was added dropwise with stirring. The clear solution became brown–orange and was left to warm to 40 C over 1 h and then cooled to 78 C. Aldehyde (1.1 equiv.) was added rapidly by syringe and the reaction was left to warm to 40 C over 3 h. The reaction was quenched with saturated NH4 F and the layers were separated. The aqueous layer was extracted three times with ether. All organic layers were combined and dried over MgSO4 , followed by vacuum filtration and rotary evaporation to dryness. Purification by flash chromatography provided the major product. Ester-derived Titanium Enolate by Transmetalation, Synthesis of syn Aldols (Duthaler’s Procedure, Section 2.4.1.2.2). BuLi (6.2 mmol) is added at 20 C to a solution of i-Pr2 NH (1 mL, 7.07 mmol) in 30 mL of ether under argon. After 15 min the reaction mixture is cooled to 78 C and a solution of 2,6-dimethylphenyl propionate (1.0 g, 5.61 mmol) in 10 mL ether is added dropwise and stirred for 1.5 h. An ethereal solution of chlorocyclopentadienylbis(1,2:5,6-di-O-isopropylidene-a-d-glucofuranos-3O-yl)titanium (0.088 m, 80 mL; 7.04 mmol, 1.25 equiv.) is added carefully via a cannula under argon pressure. After stirring for 24 h the aldehyde (7.29 mmol, 1.3 equiv.) is added and the reaction is monitored by TLC. The reaction mixture is quenched with 2 g NH4 Cl and 10 mL 1:1 THFaH2 O. After stirring for 2 h at 0 C the precipitated titanium salts are separated by filtration and washed with ether. The filtrate is washed with 20 mL 1 m HCl, 10 mL satd NaHCO3 , and brine. The aqueous washings are re-extracted with 2 50 mL EtOAc. The combined organic extracts are dried over MgSO4 and the solvent is removed. The crude products are either separated directly by chromatography or by first stirring for 1 h with 200 mL 0.1 m HCl, extracted with ether (3 100 mL), and washed with sat. NaHCO3 and brine, removing glucose as the water soluble 1,2-acetonide. Ester-derived Titanium Enolate for anti Aldol Reactions (Ghosh’s Procedure, Section 2.4.2.2.1). N-tosylaminoindanol ester was reacted with TiCl 4 in CH2 Cl2 at 0–23 C for 15 min followed by addition of i-Pr2 NEt (4 equiv.) at 23 C and stirring of the resulting brown solution for 2 h. The titanium enolate was then added to the representative aldehyde (2 equiv.) precomplexed with TiCl 4 (2.2 equiv.) at 78 C and the mixture was stirred at 78 C for 2 h before quenching with aqueous NH4 Cl. The aqueous layer
2.7 Conclusion
was extracted with CH2 Cl2 . The combined organic extracts were washed with brine, dried over Na2 SO4 , and concentrated under reduced pressure. The crude products were purified by flash chromatography on silica gel. Oxazolidinethione-derived Titanium Enolate for syn Aldol Reactions (Crimmins’s Procedure, Section 2.4.1.2.1). To a dry round-bottomed flask under nitrogen was added 0.250 g (1.0 mmol) oxazolidinethione in 6 mL CH2 Cl2 . The solution was cooled to 0 C and TiCl 4 (1.05 mmol, 0.115 mL) was added dropwise and the solution was stirred for 5 min. To the yellow slurry or suspension was added ()-sparteine (2.5 mmol). The dark red enolate was stirred for 20 min at 0 C. Freshly distilled aldehyde (1.1 mmol) was added dropwise and the reaction stirred for 1 h at 0 C. The reaction was quenched with half-saturated NH4 Cl and the layers were separated. The organic layer was dried over Na2 SO4 , filtered, and concentrated. Purification of the crude material by column chromatography afforded the main diastereomer. 2.6.2
Alternative Approaches to Titanium Enolate Generation
Although the direct generation of titanium enolates is typically the most useful method of generating titanium enolates for aldol reactions, other methods have been described. Grubbs and Stille reported that titanium enolates could be generated by reaction of biscyclopentadienyltitanium alkylidene complexes and acyl halides [93]. Oshima and coworkers reported the formation of titanium enolates from a-iodoketones with allylsilane and titanium tetrachloride [94]. Mukaiyama and coworkers reported the generation of titanium enolates from a-bromoketones on treatment with TiCl2 and copper powder [95].
2.7
Conclusion
Titanium enolate aldol reactions have been shown to be very effective for control of relative and absolute stereochemistry in acetate aldol and both syn and anti aldol reactions. The use of readily available and inexpensive titanium reagents make these methods convenient for large-scale synthesis. The synthetic potential of a variety of aldol reactions has been demonstrated by highlighting the synthesis of numerous bioactive complex natural products. The significance of enantio- and diastereoselection in synthesis, particularly in this pharmaceutical age, ensures that titanium enolate aldol reactions will remain an important part of organic synthesis for years to come. There is no doubt that unprecedented success has been achieved in the development of a variety of titanium enolate aldol reactions in the past decade. Much new potential and other exciting possibilities remain to be
121
122
2 The Development of Titanium Enolate-based Aldol Reactions
explored, however. We hope this chapter will stimulate further research and developments in titanium enolate-based aldol reactions and their use in organic synthesis. References 1 Lim, B.-M.; Williams, S. F.; Masamune, S. Comprehensive
2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
20 21 22
23
Organic Synthesis; Trost, B. M.; Fleming, I. Eds; Pergamon Press: Oxford, 1991, Vol. 2, Heathcock, C. H., ed., Chapter 1.7, 239. The term ‘chiral auxiliary’ was first introduced by Eliel. Eliel, E. L.; Tetrahedron 1974, 30, 1503 and references cited therein. Zimmerman, H. E.; Traxler, M. D. J. Am. Chem. Soc. 1957, 79, 1920. Masamune, S.; Bates, G. S.; Corcoran, J. W. Angew. Chem. Int. Ed. Engl. 1977, 16, 585. Westley, J. W. Adv. Appl. Microbiol. 1977, 22, 177. Masamune, S.; Choy, W.; Petereson, J. S.; Sita, L. R. Angew. Chem. Int. Ed. Engl. 1985, 24, 1. Verhe´, R.; De Kimpe, N.; De Buyck, L.; Thierie, R.; Schamp, N. Bull. Soc. Chim. Belg. 1980, 89, 563. Yoshida, Y.; Hayashi, R.; Sumihara, H.; Tanabe, Y. Tetrahedron Lett. 1997, 38, 8727. Yoshida, Y.; Matsumoto, N.; Hamasaki, R.; Tanabe, Y. Tetrahedron Lett. 1999, 40, 4227. Tanabe, Y.; Matsumoto, N.; Funakoshi, S.; Manta, N. Synlett 2001, 12, 1959. Yachi, K.; Shinokubo, H.; Oshima, K. J. Am. Chem. Soc. 1999, 121, 9465. Devant, R.; Braun, M. Chem. Ber. 1986, 119, 2191. Yan, T.; Hung, A.; Lee, H.; Chang, C.; Liu, W. J. Org. Chem. 1995, 60, 3301. Yan, T.; Hung, A.; Lee, H.; Liu, W.; Chang, C. J. Chinese Chem. Soc. 1995, 42, 691. Palomo, C.; Oiarbide, M.; Gonza´les, A.; Garcı´a, J.; Berre´e, F.; Linden, A. Tetrahedron Lett. 1996, 37, 6931. Phillips, A. J.; Guz, N. R. Org. Lett. 2002, 4, 2253. Gonza´lez, A´.; Aiguade´, J.; Urpı´, F.; Vilarrasa, J. Tetrahedron Lett. 1996, 37, 8949. Duthaler, R. O.; Herold, P.; Lottenbach, W.; Oertle, K.; Riediker, M. Angew. Chem. Int. Ed. Engl. 1989, 28, 495. Cambie, R. C.; Coddington, J. M.; Milbank, J. B. J.; Pausler, M. G.; Rustenhover, J. J.; Rutledge, P. S.; Shaw, G. L.; Sinkovich, P. I. Australian J. Chem. 1993, 46, 583. Fringuelli, F.; Martinetti, E.; Piermatti, O.; Pizzo, F. Gazz. Chim. Ital. 1993, 123, 637. Fringuelli, F.; Piermatte, O.; Pizzo, F.; Scappini, A. M. Gazz. Chim. Ital. 1995, 125, 195. (a) Wang, Y.; Su, D.; Lin, C.; Tseng, H.; Li, C.; Yan, T. Tetrahedron Lett. 1999, 40, 3577. (b) Wang, Y.; Su, D.; Lin, C.; Tseng, H.; Li, C.; Yan, T. J. Org. Chem. 1999, 64, 6495. Wang, Y.; Yan, T. J. Org. Chem. 2000, 65, 6752.
References 24 Cosp, A.; Romea, P.; Urpı´, F.; Vilarrasa, J. Tetrahedron Lett.
2001, 42, 4629. 25 Ghosh, A. K.; Kim, J. Manuscript in preparation, Univ. of.
Illinois–Chicago. 26 Reetz, M. T.; Peter, R. Tetrahedron Lett. 1981, 22, 4691. 27 Harrison, C. Tetrahedron Lett. 1987, 28, 4135. 28 Evans, D. A.; Rieger, D. L.; Bilodeau, M. T.; Urpı´, F. J. Am.
Chem. Soc. 1991, 113, 1047. 29 Annunziata, R.; Cinquini, M.; Cozzi, F.; Cozzi, P. G.;
Coslandi, E. Tetrahedron 1991, 47, 7897. 30 Toru, T.; Hayakawa, T.; Nishi, T.; Watanabe, Y.; Ueno, Y.
Phosphorus, Sulphur, and Silicon 1998, 136–138, 653. 31 Nakamura, S.; Hayakawa, T.; Nishi, T.; Watanabe, Y.; Toru,
T. Tetrahedron 2001, 57, 6703. 32 Reetz, M. T.; Steinbach, R.; Kesseler, K. Angew. Chem. Int.
Ed. Engl. 1982, 21, 864. 33 Crimmins, M. T.; King, B. W.; Tabet, E. A.; Chaudhary, K.
J. Org. Chem. 2001, 66, 894. 34 Nerz-Stormes, M.; Thornton, E. R. Tetrahedron Lett. 1986,
27, 897. 35 Shirodkar, S.; Nerz-Stormes, M.; Thornton, E. R.
Tetrahedron Lett. 1990, 31, 4699. 36 Nerz-Stormes, M.; Thornton, E. R. J. Org. Chem. 1991, 56,
2489. 37 Crimmins, M. T.; King, B. W.; Tabet, E. A. J. Am. Chem. Soc.
1997, 119, 7883. 38 Crimmins, M. T.; Chaudhary, K. Org. Lett. 2000, 2, 775. 39 Li, Z.; Wu, R.; Michalczyk, R.; Dunlap, R. B.; Odom, J. D.;
Silks, L. A. III. J. Am. Chem. Soc. 2000, 122, 386. 40 Bonner, M. P.; Thornton, E. R. J. Am. Chem. Soc. 1991, 113,
1299. 41 Ahn, K. H.; Lee, S.; Lim, A. J. Org. Chem. 1992, 57, 5065. 42 Yan, T.; Lee, H.; Tan, C. Tetrahedron Lett. 1993, 34, 3559. 43 Yan, T.; Tan, C.; Lee, H.; Lo, H.; Huang, T. J. Am. Chem.
Soc. 1993, 115, 2613. 44 Ghosh, A. K.; Fidanze, S.; Onishi, M.; Hussain, K. A.
Tetrahedron Lett. 1997, 38, 7171. 45 Ghosh, A. K.; Kim, J. Tetrahedron Lett. 2001, 42, 1227. 46 Ghosh, A. K.; Kim, J. Tetrahedron Lett. 2002, 43, 5621. 47 Ghosh, A. K.; Liu, C.; Xu, X. Unpublished results, University
of Illinois–Chicago. 48 Xiang, Y.; Olivier, E.; Ouimet, N. Tetrahedron Lett. 1992, 33,
457. 49 Ahn, K. H.; Yoo, D. J.; Kim, J. S. Tetrahedron Lett. 1992, 22,
6661. 50 Casper, D. M.; Burgeson, J. R.; Esken, J. M.; Ferrence, G.
M.; Hitchcock, S. R. Org. Lett. 2002, 4, 3739. 51 Bold, G.; Duthaler, R. O.; Riediker, M. Angew. Chem. Int.
Ed. Engl. 1989, 28, 497. 52 Duthaler, R. O.; Herold, P.; Wyler-Helfer, S.; Riediker,
M. Helv. Chim. Acta 1990, 73, 659. 53 (a) Reetz, M. T.; Peter, R. Tetrahedron Lett. 1981, 22, 4691.
(b) Harrison, C. R. Tetrahedron Lett. 1987, 28, 4135. (c) Panek, J. S.; Bula, O. A. Tetrahedron Lett. 1988, 29, 1661.
123
124
2 The Development of Titanium Enolate-based Aldol Reactions 54 Mahrwald, R. Org. Lett. 2000, 2, 4011. 55 Siegel, C.; Thornton, E. R. Tetrahedron Lett. 1986, 27, 457. 56 Siegel, C.; Thornton, E. R. J. Am. Chem. Soc. 1989, 111,
5722. 57 Figueras, S.; Martı´n, R.; Romea, P.; Urpı´, F.; Vilarrasa, J.
Tetrahedron Lett. 1997, 38, 1637. 58 Evans, D. A.; Clark, J. S.; Metternich, R.; Novack, V. J.;
Sheppard, G. S. J. Am. Chem. Soc. 1990, 112, 866. 59 Evans, D. A.; Dart, M. J.; Duffy, J. L.; Rieger, D. L. J. Am.
Chem. Soc. 1995, 117, 9073. 60 Meyers, A. I.; Yamamoto, Y. Tetrahedron 1984, 40, 2309. 61 Murphy, P. J.; Procter, G.; Russell, A. T. Tetrahedron Lett.
1987, 28, 2037. 62 Annunziata, R.; Cinquini, M.; Cozzi, F.; Borgia, A. L.
J. Org. Chem. 1992, 57, 6339. 63 Kazmaier, U.; Grandel, R. Synlett 1995, 945. 64 Ghosh, A. K.; Onishi, M. J. Am. Chem. Soc. 1996, 118, 2527. 65 Ghosh, A. K.; Fidanze, S.; Onishi, M.; Hussain, K. A. 66 67 68 69 70 71 72
73
74 75 76 77
78
79 80
81 82
Tetrahedron Lett. 1997, 38, 7171. Fidanze, S. Ph.D. Thesis. University of Illinois–Chicago, 2000. Ghosh, A. K.; Kim, J. Unpublished results. Ghosh, A. K.; Kim, J. Org. Lett. 2003, 5, 1063. Crimmins, M. T.; McDougall, P. J. Org. Lett. 2003, 5, 591. Duthaler, R. O.; Herlold, P.; Wyler-Helfer, S.; Riediker, M. Helv. Chim. Acta 1990, 73, 659. Ghosh, A. K.; Fidanze, S. Org. Lett. 2000, 2, 2405. (a) Evans, D. A.; Chapman, K. T.; Carriera, E. M. J. Org. Chem. 1988, 53, 3560. (b) Evans, D. A.; Chapman, K. T. Tetrahedron Lett. 1986, 27, 5939. Hu, T.; Schaus, J. V.; Lam, K.; Palfreyman, M. G.; Wuonola, M.; Gustafson, G.; Pankek, J. S. J. Org. Chem. 1998, 63, 2401. Crimmins, M. T.; King, B. W. J. Am. Chem. Soc. 1998, 120, 9084. Ghosh, A. K.; Bischoff, A.; Cappiello, J. Eur. J. Org. Chem. 2003, 821. Ghosh, A. K.; Bischoff, A.; Cappiello, J. Org. Lett. 2001, 3, 2677. (a) Dondoni, A.; Perrone, D.; Semola, T. J. Org. Chem. 1995, 60, 7927. (b) Dondoni, A.; Fantin, G.; Fogagnolo, M.; Medici, A.; Pedrini, P. Synthesis 1988, 685. (c) Dondoni, A.; Fogagnolo, M.; Medici, A.; Pedrini, P. Tetrahedron Lett. 1985, 26, 5477. Biswas, K.; Lin, H.; Njardarson, J. T.; Chappel, M. D.; Chou, T.; Guan, Y.; Tong, W. P.; He, Lifeng; Horwitz, S. B.; Danishefsky, S. J. J. Am. Chem. Soc. 2002, 124, 9825. Chappell, M. D.; Stachel, S. J.; Lee, C. B.; Danishefsky, S. J. Org. Lett. 2000, 2, 1633. (a) Lee, C. B.; Wu, Z.; Zhang, F.; Chappell, M. D.; Stachel, S. J.; Chou, T. C.; Guan, Y.; Danishefsky, S. J. J. Am. Chem. Soc. 2001, 123, 5249. (b) Wu, Z.; Zhang, F.; Danishefsky, S. J. Angew. Chem. Int. Ed. Engl. 2000, 39, 4505. Ghosh, A. K.; Bischoff, A. Org. Lett. 2000, 2, 1753. Ghosh, A. K.; Liu, C. J. Am. Chem. Soc. 2003, 125, 2374.
References 83 Ley, S. V.; Lygo, B.; Wonnacott, A. Tetrahedron Lett. 1989, 26,
535. 84 Hayward, C. M.; Yohannes, D.; Danishefsky, S. J. J. Am.
Chem. Soc. 1993, 115, 9345. 85 Crimmins, M. T.; Katz, J. D.; Washburn, D. G.; Allwein,
S. P.; McAtee, L. F. J. Am. Chem. Soc. 2002, 124, 5661. 86 Sheppeck, J. E. II; Liu, W.; Chamerlin, A. R. J. Org. Chem.
1997, 62, 387. 87 Chakraborty, T. K.; Jayaprakash, S.; Laxman, P. Tetrahedron
2001, 57, 9461. 88 Enders, D.; Geibel, G.; Osborne, S. Chem. Eur. J. 2000, 6,
1302. 89 (a) Enders, D. in Asymmetric Synthesis, Vol 3 (J. D. Morrison,
90 91 92
93 94 95
Ed.), Academic Press, Orlando, 1984, 275. (b) Enders, D. Chem. Scripta 1985, 65, 139. (c) Enders, D.; Fey, P.; Kipphardt, H. Org. Synth. 1987, 65, 173, 183. Paterson, I.; Perkins, M. V. Tetrahedron, 1996, 52, 1811. Perkins, M. V.; Sampson, R. A. Org. Lett. 2001, 3, 123. (a) Narasaka, K.; Pai, F. Tetrahedron 1984, 40, 2233. (b) Patterson, I.; Donghi, M.; Gerlach, K. Angew. Chem. Int. Ed. Engl. 2000, 39, 3315. Stille, J. R.; Grubbs, R. H. J. Am. Chem. Soc. 1983, 105, 1664. Maeda, K.; Shinokubo, H.; Oshima, K. J. Org. Chem. 1998, 63, 4558. Mukaiyama, T.; Kagayama, A.; Igarashi, K.; Shiina, I. Chem. Lett. 1999, 1157.
125
127
3
Boron and Silicon Enolates in Crossed Aldol Reaction Teruaki Mukaiyama and Jun-ichi Matsuo 3.1
Introduction
Metal enolates play an important role in organic synthesis and metal enolate-mediated aldol type reactions, in particular, are very useful synthetic tools in stereoselective and asymmetric carbon–carbon bond formation. Generation and reactions of different metal enolates have been extensively studied and successful applications to the controlled formation of carbon– carbon bonds have been realized under mild conditions. The aldol reaction has long been recognized as one of the most useful synthetic tools. Under classical aldol reaction conditions, in which basic media are usually employed, dimers, polymers, self-condensation products, or a,b-unsaturated carbonyl compounds are invariably formed as byproducts. The lithium enolate-mediated aldol reaction is regarded as one useful synthetic means of solving these problems. Besides the well-studied aldol reaction based on lithium enolates, very versatile regio- and stereoselective carbon–carbon bond forming aldol-type reactions have been established in our laboratory by use of boron enolates (1971), silicon enolates– Lewis acids (1973), and tin(II) enolates (1982). Here we describe the first two topics, boron and silicon enolate-mediated crossed aldol reactions, in sequence. 3.2
Crossed Aldol Reactions Using Boron Enolates 3.2.1
Discovery of Aldol Reaction Mediated by Boron Enolates
First, the background of how we first conceived the idea of using boron enolate (vinyloxyboranes) in aldol reactions is described. At the beginning of the 1970s, several reactions were being screened by utilizing characteristics of alkylthioboranes based on the concept of elements in combination, i.e. two elements in combination, create a novel reactivity different from when Modern Aldol Reactions. Vol. 1: Enolates, Organocatalysis, Biocatalysis and Natural Product Synthesis. Edited by Rainer Mahrwald Copyright 8 2004 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim ISBN: 3-527-30714-1
128
3 Boron and Silicon Enolates in Crossed Aldol Reaction
(CH3)2CO hν
OH O
H 2O
H2C C O + Bu2B SBu 1 2
SBu 4
SBu H2C C 3
SBu
Scheme 3.1
Unexpected formation of b-hydroxy thioester 4 on reaction of ketene 1 with thioborane 2.
they are used separately. When ketene 1 was mixed with two moles of butylthioborane 2, which we assumed would result in the formation of ketene thioacetal 3, S-butyl 3-hydroxy-3-methylbutanethiolate 4 was unexpectedly obtained (Scheme 3.1). It was difficult at first to discover the mechanism of this reaction, but the product soon indicated the participation of acetone in this reaction. In the experiment, ketene 1 is generated by degradation of acetone under irradiation; a small amount of acetone is, therefore, introduced into the reaction mixture. Thus b-hydroxy thioester 4 is afforded by reaction of the three components acetone, ketene 1, and alkylthioborane 2. When a gaseous ketene 1, free form acetone, is introduced into the mixture of alkylthioborane 2 and carbonyl compound, the expected b-hydroxy thioesters 5 are obtained in high yield (Eq. (1)) [1].
RCHO +
1
OH O
H2O
H2C C O + Bu2B SBu
R
2
SBu
ð1Þ
5
Investigation of this mechanism reveals that the key intermediate of this reaction is vinyloxyborane (boron enolate) 7 generated from ketene 1 and alkylthioborane 6 (Eq. (2)) [2]. Thus, our original study on organothioboranes led us, unexpectedly, to discover the widely utilized aldol reactions via boron enolates [3]. OBBu2 Bu2B SPh + H2C C O 6 1
H 2C SPh vinyloxyborane 7
ð2Þ Me2CO
O
Bu Bu B O SPh
OH O SPh
3.2 Crossed Aldol Reactions Using Boron Enolates
3.2.2
New Method for Direct Generation of Boron Enolates
Direct generation of boron enolates from parent carbonyl compounds had been desired to expand the synthetic utility of the boron enolate-mediated aldol reaction. Although several synthetic methods to generate vinyloxyboranes (boron enolates) were reported [3–5] no useful ones for direct generation of boron enolates from parent carbonyl compounds were known until 1976. After discovering the above-mentioned aldol reaction via boron enolates we had been exploring a useful method for direct generation of boron enolates from parent carbonyl compounds. It was then thought that increasing the Lewis acidity of boron by introducing an excellent leaving group on to boron would result in an increase in acidity of the carbonyl compounds by coordination of a carbonyl group to the boron compound; the corresponding boron enolate would then be formed by abstraction of the a-proton of the carbonyl compound with a weak base such as tertiary amine. The trifluoromethanesulfonyloxy (triflate, TfO) group was chosen as the leaving group, and dibutylboryl triflate 8 was found to generate boron enolates 9 by the reaction with ketones in the presence of a weak base such as N-diisopropylethylamine or 2,6-lutidine (Eq. (3)) [6]. This is the first example of the use of a metal triflate in synthetic chemistry; a variety of metal triflates are now known to be versatile Lewis acids in organic synthesis. Subsequent addition of aldehydes afforded the corresponding aldols 10 in good yields. Thus, the crossed aldol reaction which starts from ketone and aldehyde is performed easily by applying dialkylboryl triflate under mild reaction conditions.
O R1
Bu2BOTf 8 i-Pr2NEt
OBBu2
O
R2CHO
OH
R1
R1 9
R2
ð3Þ
10
After our first report, this aldol reaction has been investigated in detail by many research groups [3]. It is currently understood that the boron enolatemediated aldol reaction proceeds via a more rigid chair-like six-membered transition state (12 or 15) than those of alkali metal enolates, because of a shorter bond length between boron and oxygen (Figure 3.1), that is, dialkylboron enolates have relatively short metal–ligand and metal–oxygen bonds, which are suited to maximizing 1,3-diaxial (R3 –L) interactions in the transition states. This facilitates the formation of more stable transition states (12 and 15), where R3 occupies a pseudoequatorial position, when vinyloxyboranes (11 and 14) react with aldehydes to afford aldol adducts (13 and 16) stereoselectively. Therefore, aldol reactions via boron enolates give aldol adducts more stereoselectively than those via alkali metal enolates such as lithium enolates. This stereoselective aldol reaction is thus an outstanding method for the stereoselective synthesis of acyclic compounds.
129
130
3 Boron and Silicon Enolates in Crossed Aldol Reaction
O OBL2 R
R1
2
H
H R
R
L O
R1 O
3 3
B
L
R2
R3
R1
O
11 (Z )-enolate
OH R2 13 syn
12
O OBL2
H
H
R3
R1 R2
2
R 14 (E )-enolate
R3
L R1 O
B
O L
OH R3
R1
O
R2 16 anti
15
Fig. 3.1
Stereoselective aldol reaction of (Z) or (E) boron enolates and aldehydes.
3.2.3
Regioselectivity on Generation of Boron Enolates
Regioselective formation of boron enolates is conducted by using a-halo[3–5], a-diazo- [3], or a,b-unsaturated ketones [3] but their direct generation from parent carbonyl compounds is a more important and synthetically useful method. The regioselectivity on generation of the boron enolate is controlled by the reaction conditions. The kinetic boron enolate of 2-pentanone 17 is formed by use of dibutylboryl triflate 8 and N-diisopropylethylamine at 78 C in a short reaction time [6a], whereas the thermodynamic enolate 18 is predominantly generated by the use of 9-BBNOTf 19 and 2,6lutidine at 78 C in a long reaction time (Figure 3.2) [6b]. Subsequent aldol reactions of boron enolates with aldehydes proceed without loss of regiochemical integrity, but the reactions with ketones proceed slowly and the regiochemical integrity of an aldol product does not reflect that of an enolate. Preparation of Dibutylboryl Triflate 8 (Eq. (4)) [6c, 7] Bu3B + TfOH
OB
18
Bu2BOTf 8
BOTf 19
ð4Þ
O
2,6-lutidine –78 °C, 16 h
Fig. 3.2
Regioselective generation of boron enolates.
Bu2BOTf 8 i-Pr2NEt –78 °C, 15 min
OBBu2
17
3.2 Crossed Aldol Reactions Using Boron Enolates
A small amount of trifluoromethanesulfonic acid (1.0 g) was added to tributylborane (15.16 g, 83.3 mmol) at room temperature under argon. The mixture was stirred and warmed to 50 C until evolution of butane began (there is an induction period). After cooling of the mixture to 25 C the remaining trifluoromethanesulfonic acid (11.51 g, total 83.3 mmol) was added dropwise at such a rate as to maintain a temperature between 25 and 50 C. The mixture was then stirred for further 3 h at 25 C. Distillation under reduced pressure gave pure dibutylboryl triflate 8 (19.15 g, 84%; bp 60 C/ 2 mmHg). Preparation of 9-BBN Triflate 19 (Eq. (5)) [6c] BH + TfOH
BOTf
ð5Þ
19
Trifluoromethanesulfonic acid (18.75 g, 125 mmol) was added to 9-BBN (15.33 g, 127 mmol) in hexane (100 mL) under argon. After overnight stirring the reaction mixture was concentrated and distilled in vacuo to afford 9-BBNOTf 19 (38 C/0.03 mmHg, 28.84 g, 85%). 3.2.4
Stereoselective Formation of (E) or (Z) Boron Enolates
To obtain either syn or anti aldol adducts selectively it is important to generate boron enolates with the appropriate geometry (E or Z), that is, (Z) enolates 11 react with a variety of aldehydes to yield predominantly syn aldols 13, whereas (E) enolates 14 react somewhat less stereoselectively to give anti aldol adducts 16 as the major products (Figure 3.1 and Table 3.1). (E) Boron ketone enolates 20 are generated from a hindered dialkylboryl triflate (e.g. dicyclohexyl) and diisopropylethylamine at 0 C whereas the (Z) isomer 21 is prepared by using a less hindered boryl triflate (e.g. dibutyl) at 78 C (Figure 3.3) [8]. (Z) Ester boron enolates 22 [9] are selectively generated by using Bu2 BOTf and i-Pr2 NEt when the methyl or ethyl esters are employed, whereas (E) ester boron enolates 23 [9] are also selectively generated by using cHex2 BOTf and Et3 N when the tert-butyl ester is employed (Figure 3.4) [10]. Preparation of Dicyclohexylboryl Triflate (Eq. (6)) [11] c-Hex2BH + TfOH
c-Hex2BOTf
ð6Þ
A 250-mL round-bottomed flask capped with a rubber septum, containing a magnetic stirring bar and a connecting tube attached to a mercury bubbler was kept at 0 C and charged with hexane (100 mL) and c-Hex2 BH (26.7 g,
131
132
3 Boron and Silicon Enolates in Crossed Aldol Reaction Tab. 3.1
Stereoselective formation of syn and anti aldols via (Z) and (E) boron enolates. O
OBBu2 R2
+
R1
Ph
OH O H
Ph
OH O R
1
+
R1
Ph
2
R2
R syn
Boron Enolate
syn/anti
Ref.
>95:5
7a
OBBu2 Me
Boron Enolate a
syn/anti
Ref.
>97:3
8a
>97:3
8a
OBBu2
Z OBBu2 Me
anti
t-Bu Z:E = >99:1 OBBu2
25:75
7a
Ph Z:E = 99:1
E OBBu2 OBBu2 Et Z :E = >97:3
8a
98:2
7c
O
Bu2BO
18:82
8a
Z:E = 19:81
N
O
Z:E = >97:3
OB(c-C5H9)2 c-Hex
10:90
Z:E = <5:95
OB(c-C5H9)2 i-Pr
St Bu
8a
>97:3
a The
14:86
7b
highest priority designation is assigned to the OBR2 group with enolate substituents.
Z:E = 12:88
150 mmol). Trifluoromethanesulfonic acid (13.3 mL, 150 mmol) was added dropwise using a syringe with constant stirring. Hydrogen is rapidly evolved and should be safely vented. The stirring was continued at 0 C for 2–3 h. All the suspended solid c-Hex2 BH dissolved and the homogeneous reaction mixture was left at 0 C for 1–2 h without stirring. Two layers were obtained and the top layer was transferred into a dry 250-mL round-bottomed flask
OB(c-Hex)2 c-Hex2BOTf R (E )-20 R = i-Pr E:Z = 81:19
i-Pr2NEt 0 °C, 30 min
O R
Bu2BOTf i-Pr2NEt –78 °C, 30 min
Fig. 3.3
Stereoselective formation of (Z) or (E) boron enolates of ketones.
OBBu2 R (Z )-21 R = Et E:Z = <3:97
3.2 Crossed Aldol Reactions Using Boron Enolates
Bu2BOTf
OBBu2
OH
RO
RO
i-Pr2NEt –78 °C, 1 h
O
R'CHO
R = Me, Et
R' syn
(Z )-22 O RO
OB(c-Hex)2
c-Hex2BOTf Et3N –78 °C, 1 h
O
R'CHO
OH
RO
RO
R' anti
R = t-Bu (E )-23
Fig. 3.4
Stereoselective formation of (Z) or (E) boron enolates of carboxylic esters.
leaving the small yellow layer (approx. 2 mL) behind. Solid c-Hex2 BOTf was obtained by removing the solvent using a water aspirator (15–20 mm). It was then recrystallized from hexane. Mp 88 C, yield 80%. Stock solutions (1.00 m) in CCl 4 and in hexane were prepared and kept at 0 C for enolboration. Typical Experimental Procedure for Crossed Aldol Reaction via Boron Enolate (Eq. (7)) [6a] Bu2BOTf i-Pr2NEt
O
OBBu2
24
ð7Þ Ph
CHO
O
OH Ph 25
To a solution of dibutylboryl triflate (301 mg, 1.1 mmol) and diisopropylethylamine (142 mg, 1.1 mmol) in ether (1.5 mL) was added dropwise 2methyl-4-pentanone 24 (100 mg, 1.0 mmol) in ether (1.5 mL) at 78 C, under argon, with stirring. After stirring of the mixture for 30 min, 3phenylpropanal (134 mg, 1.0 mmol) in ether (1.5 mL) was added at the same temperature. The reaction mixture was allowed to stand for 1 h, then added to pH 7 phosphate buffer at room temperature and extracted with ether. After removal of ether, the mixture was treated with 30% H2 O2
133
3 Boron and Silicon Enolates in Crossed Aldol Reaction
134
(1 mL) in methanol (3 mL) for 2 h and H2 O was added. The mixture was concentrated to remove most of the methanol and extracted with ether. The organic layer was washed with 5% NaHCO3 solution and brine, dried over Na2 SO4 , and concentrated. The crude oil was purified by preparative TLC to give 3-hydroxy-7-methyl-1-phenyl-5-octanone 25 (192 mg, 82%). 3.2.5
syn-Selective Asymmetric Boron Aldol Reactions
Conventional asymmetric aldol reactions have been performed by using chiral enolates and achiral carbonyl compounds. A chiral boron enolate generated from a chiral oxazolidone derivative (26 and 28), dialkylboron triflate, and diisopropylethylamine reacts stereoselectively with aldehydes to afford the corresponding syn aldol adducts (27 and 29) in good yields with excellent diastereoselectivity (Eqs. (8) and (9)) [12]. The opposite sense of asymmetric induction is achieved by changing the chiral auxiliary. Several other chiral auxiliaries have also been developed for highly diastereoselective synthesis of syn aldol adducts (Eqs. (10)–(13)) [13]. O
O
O
OBR2
R2BOTf O
N
O O
N
O
O
OH
R'CHO R'
N
i-Pr2NEt 27
26
ð8Þ O
O
O
OBR2
R2BOTf O
N
O i-Pr2NEt
Ph 28
O
O
OH
R'CHO O
N
R'
N
Ph
Ph
29
ð9Þ
O
OBR2
R2BOTf
O
R'CHO
OH R'
i-Pr2NEt
t-BuMe2SiO
O
1) HF-CH3CN 2) NaIO4
HO
t-BuMe2SiO
t-BuMe2SiO
OH R'
ð10Þ
3.2 Crossed Aldol Reactions Using Boron Enolates
Me Me
N
Ipc2BOTf
O
i-Pr2NEt
Me Me
MeO
2
N
OH
O
1) H2O2
RCHO
B
135
R
2) H3O+
O
syn/anti = 10/90~5/95 77~85% ee (anti)
3) CH2N2
ð11Þ OMe
Ph
N
9-BBNOTf
O
i-Pr2NEt
OMe
OH
MeO
N Ph
O
1) H2O2
RCHO
B
R
2) H3O+
O
syn/anti = 97/3~98/2 40~60% ee (syn)
3) CH2N2
ð12Þ
O
R2BOTf, i-Pr2NEt
OBR2
N
R'CHO
O
N CH2Cl2, -5°C
S O2
S O2
R'
XN
-78°C
OH
ð13Þ 3.2.6
anti-Selective Asymmetric Aldol Reaction
An anti-selective diastereoselective aldol reaction [14] has been performed by using enantiomerically pure carboxylic esters derived from ()- or (þ)norephedrine 30 [15]. This method is applicable to a wide range of aldehydes with high selectivity (both syn/anti and diastereoselectivity of anti isomer). It is proposed that (E) boron enolates 31 are formed by this procedure and aldol reaction proceeds via the six-membered transition state (Eq. (14)). The aldol products 32 are converted to the corresponding alcohols (LiAlH4 , THF) or carboxylic acids (LiOH, THFaH2 O) without loss of stereochemical integrity. Ph Me Bn
O
c-Hex2BOTf
O N
Et3N
SO2Mes 30
Ph Me Bn
OB(c-Hex)2
O N
SO2Mes
Me Bn
O N
SO2Mes
31
32
Me Me
Mes: Me
O
Ph RCHO
ð14Þ
OH R
3 Boron and Silicon Enolates in Crossed Aldol Reaction
136
It is also reported that addition of Lewis acids to the reaction of chiral boron enolates and aldehydes changes syn-selectivity to anti-selectivity (Eqs. (15) and (16)) [16]. The change of stereoselection is rationalized by considering a Lewis acid-mediated open transition state (e.g. 33). O
O
O Bu2BOTf
O
N
O
O
O
OH i-Pr +
N
O
O
OH
N
i-Pr
Et2AlCl
i-Pr2NEt
Bu Bu B O O
O
i-PrCHO
:
95
5
i
Pr Me
N
O H H i-Pr LA
ð15Þ
33 1) Et2BOTf, i-Pr2EtN
X
2) RCHO
R O
OH syn
ð16Þ SO2
O 1) Et2BOTf, i-Pr2EtN 2) RCHO, TiCl4
X
R O
OH anti
Thus, boron enolates prepared under mild conditions enable aldol-type reactions essentially under neutral conditions. Stereocontrolled synthesis of acyclic molecules has been achieved by employing boron enolate-mediated aldol reactions; this method has been extensively applied to the synthesis of natural products. Typical Procedure for syn-Selective Asymmetric Boron Aldol Reaction (Eq. (17)) [13] O
O
O
O
N
O
OBR2
Bu2BOTf
O
OH
i-PrCHO O
N
O
N
i-Pr
i-Pr2NEt 26
34 syn/anti = 497:1
ð17Þ
3.3 Crossed Aldol Reactions Using Silicon Enolates
To a 0.2–0.5 m solution of chiral imide 26 in CH2 Cl2 under argon (0 C) was added 1.1 equiv. dibutylboryl triflate followed by 1.2 equiv. diisopropylethylamine. After 30 min the reaction mixture was cooled (78 C) and 1.1 equiv. isobutyraldehyde was added and stirred for 0.5 h at 78 C and then for 1.5 h at room temperature. The reaction was quenched with pH 7 phosphate buffer and the boron aldolate complex was oxidized with 30% hydrogen peroxide–methanol (0 C, 1 h). The aldol product 34 was then isolated by ether extraction (syn/anti ¼ 497:1). Typical Procedure for anti-Selective Asymmetric Boron Aldol Reaction (Eq. (18)) [15c] Ph Me Bn
O
1) c-Hex2BOTf, Et3N
O N
SO2Mes
2) i-PrCHO
30
Ph Me Bn
O
OH
O N
SO2Mes
i-Pr
ð18Þ
35 anti:syn = >98:2 96%de (anti)
To a solution of chiral ester 30 (4.80 g, 10 mmol) and triethylamine (3.40 mL, 24 mmol) in dichloromethane (50 mL) at 78 C under nitrogen is added a solution of dicyclohexylboron triflate (1.0 m in hexane, 22 mL, 22 mmol) dropwise over 20 min. After the resulting solution has been stirred at 78 C for 30 min, isobutyraldehyde (1.08 mL, 12 mmol) is added dropwise. The reaction mixture is stirred for 30 min at 78 C then left to warm to room temperature over 1 h. The reaction is quenched by adding pH 7 buffer solution (40 mL), the mixture is diluted with methanol (200 mL), and 30% hydrogen peroxide (20 mL) is added. After the mixture has been stirred vigorously overnight, it is concentrated. Water is added to the residue, and the mixture is extracted with dichloromethane. The combined organic extracts are washed with water, dried over Na2 SO4 , filtered, and concentrated. Purification of the residue gives aldol adduct 35 (88%, anti/syn b 24:1).
3.3
Crossed Aldol Reactions Using Silicon Enolates 3.3.1
Discovery of Silicon Enolate-mediated Crossed Aldol Reactions
The driving force of the above-mentioned aldol reaction with boron enolate is considered to be the interconversion of enol ketones (boron enolates) to their more stable ketones (b-boryloxy ketones) [17]. When the boron
137
138
3 Boron and Silicon Enolates in Crossed Aldol Reaction
enolate-mediated aldol reaction was studied in our laboratory an investigation on the development of new reaction chemistry using titanium(IV) chloride was in progress [18]. A new and important idea was immediately came to mind that titanium(IV) chloride would effectively generate active electrophilic species as a result of its strong interaction with carbonyl compounds, and the complex thus formed would react easily even with relativly weaker carbon nucleophiles to form a new carbon–carbon bond. Use of a stable and isolable silyl enol ether [19] was suggested as a weak nucleophile and, just as expected, aldol reaction between silyl enol ether of acetophenone 36 and benzaldehyde in the presence of titanium(IV) chloride afforded the aldol product 37 in high yield (Eq. (19)) [20]. O Ph
OSiMe3 +
H
OH O
TiCl4 Ph
Ph
ð19Þ
Ph 37
36
It is reported that enol ethers react with acetals or ketals, promoted by Lewis acids, to give aldol-type adducts: these reactions of alkyl enol ethers are, however, often accompanied by undesired side reactions [21]. Further, is difficult to perform crossed-aldol reactions selectively because conventional aldol reactions are conducted under equilibrium conditions using a basic or acidic catalyst in protic solvents [22]. Detailed studies of this new aldol reaction of silicon enolates, however, reveal a number of advantages over conventional methods. First, it not only gives a variety of aldol adducts in high yields but also a regioselective aldol adduct when the silyl enol ether of an unsymmetrical ketone is used. That is, the aldol reaction proceeds with retention of the regiochemical integrity of the starting silyl enol ethers to afford the corresponding aldol regiospecifically. Starting silyl enol ethers can be conveniently prepared regioselectively under kinetically or thermodynamically controlled conditions. Second, functional group selectivity is observed – i.e. reactions with aldehydes proceed at 78 C whereas those with ketones proceed at elevated temperatures (ca. 0 C). Chemoselectivity is observed with acceptors having two different kinds of carbonyl function, for example aldehyde and ketone or ester, in the same molecule. Treatment of phenylglyoxal with silyl enol ether 38 at 78 C affords a-hydroxy-g-diketone 39 (Eq. (20)) [20b]. The reaction of ketoesters 40 other than b-ketoesters with silyl enol ether 38 gives hydroxyketoesters 41 as sole products (Eq. (21)) [23]. O
OSiMe3 H
Ph O
+
Ph
Me 38
O
TiCl4
Ph Me
Ph OH O 39
ð20Þ
3.3 Crossed Aldol Reactions Using Silicon Enolates
O
O
OSiMe3 +
OR
n
Ph
Me
Me
n
OR
Ph 41
38
40 n = 0, 2, 3 R = Me, Et
OH O
O
TiCl4
ð21Þ A directed aldol reaction between two ketones affords thermodynamically unfavorable aldols in high yields, because of stabilization of the aldol adducts by their intramolecular chelation with titanium 42 or by their conversion to silyl ethers 43 (Eq. (22)). TiCl3 OSiMe3
O R2
R1
3 + R
O
TiCl4
R5
R
R4
O
Me3SiO
1
R5
R2 3 4 R R 42
HO
H2O R1
or
R
O
1
R2 3 4 R R
R5
43
O
R2 3 4 R R
R5
ð22Þ
Despite its remarkable power as a method for carbon–carbon bond formation, the level and sense of its stereoselectivity often vary. The syn/anti ratio for the aldol product is affected by the stereochemistry of the aldehyde and silyl enolate, and the character of the Lewis acid catalyst (Figure 3.5 and Table 3.2) [24]. The mechanistic basis for the aldol reaction has not yet been firmly established. Apart from a limited number of exceptions, however [25], the stereochemical observations have been rationalized by considering acyclic transition states (44–47) [26]. Typical Procedure for Titanium(IV) Chloride-catalyzed Aldol Reaction of Silicon Enolates (Eq. (23)) [20b] OSiMe3
O
+ PhCHO 48
OH
TiCl4 Ph
ð23Þ
49
A solution of 1-trimethylsilyloxy-1-cyclohexene 48 (426 mg, 2.5 mmol) in dichloromethane (10 mL) was added dropwise into a mixture of benzaldehyde (292 mg, 2.75 mmol) and TiCl 4 (550 mg, 2.75 mmol) in dichloro-
139
140
3 Boron and Silicon Enolates in Crossed Aldol Reaction
O
OSiMe3 R2
+
1
R
R
OH O
Lewis Acid (LA)
3
H
Ph
OH O R
+
1
R1
Ph
R2
2
R anti
syn
LA O
H (Z )-enolate:
R
3
H
R1
LA O
R2 44
R
vs.
OSiMe3
R
3
R1 anti
LA
LA O
H
H
R2 R3
H
R1
45
H
Me3SiO
syn
(E )-enolate:
H
2
46
vs.
OSiMe3
O
R3
H
47
R1
Me3SiO
anti
R2
syn
Fig. 3.5
Transition-state models for Lewis acid-catalyzed aldol reaction of silicon enolates.
methane (20 mL) under an argon atmosphere at 78 C and the reaction mixture was stirred for 1 h. After hydrolysis at that temperature the resulting organic layer was extracted with ether, and the combined organic extract was washed with water, dried over Na2 SO4 , and concentrated. The residue was purified by chromatography to afford a diastereo mixture of aldol adducts 49 (92%, syn/anti ¼ 75/25). As an extension of this new procedure for carbon–carbon bond formation, the reaction between silyl enol ethers and acetals 50, a typical protecting group of aldehydes, is performed to afford b-alkoxy carbonyl compound 51 in the presence of titanium(IV) chloride (Eq. (24)) [27]. A variety of substituted furans are readily prepared by application of the TiCl 4 -promoted reaction of a-halo acetals 52 with silyl enol ethers (Eq. (25)) [27]. OSiMe3
R1 R2
OR OR 50
+
R3
R5 R4
R5 = H, Alkyl, Ar, OR
RO
TiCl4 R1
O
R2 3 4 R R 51
R5
ð24Þ
3.3 Crossed Aldol Reactions Using Silicon Enolates
141
Tab. 3.2
Stereochemical outcome of Lewis acid-catalyzed aldol reactions of a variety of silicon enolates. O
OSiMe3 R2
R1
+
Ph
OH O
OH O
Lewis acid H
Ph
R
1
+
2
R anti
syn
Silicon Enolate
Lewis acid syn/anti Ref.
Silicon Enolate a
OSiMe3 OEt Z:E = 100:0
33:67
24a
TiCl 4
26:74
24a
t-Bu
4:96
24c
BF3 aOEt2
47:53
24c
BF3 aOEt2
5:95
24d
BF3 aOEt2
4:96
24d
TiCl 4
14:86
24b
TiCl 4
77:23
24b
OSiMe3 Ph Z:E = 100:0 OSiMe3
TiCl 4
>92:8
St Bu
24b
OEt
Z:E = 10:90
OSiMe3
TiCl 4
OEt
TiCl 4
t-Bu Z:E = 100:0
Z:E = 15:85 OSiMe3
Lewis acid syn/anti Ref.
OSiMe3
TiCl 4
OSiMe3 OEt
R1
Ph
R2
>92:8
OSiMe2t Bu
24b
St Bu Z:E = >95:5
t-Bu OSiMe3
OSiMe3
TiCl 4
25:75
20b
OSiMe3 OSiMe3
Z:E = 0:100 t-Bu OSiMe3
TiCl 4
50:50
20b
BF3 aOEt2
60:40
24c
BF3 aOEt2
56:44
24c
OSiMe3
a The
highest priority designation is assigned to the OSiR3 group with enolate substituents.
Z:E = 0:100 OSiMe3 Et Z:E = 100:0 OSiMe3 i-Pr Z:E = 97:3
Br R1 R
OMe 2 OMe
OSiMe3 + R3CH
R4
TiCl4
Br
R3
R1 MeO R2 O
R4
toluene reflux
52
R1
O
R3
R2 53
ð25Þ
R4
142
3 Boron and Silicon Enolates in Crossed Aldol Reaction
OMe
OMe
1) TiCl4-Ti(Oi-Pr)4
OMe
+
OSiMe3
CHO
2) H2O
55 54
56
OH Vitamin A Scheme 3.2
Synthesis of vitamin A using aldol reaction of acetal 54 and silyl dienol ether 55.
In the presence of titanium(IV) chloride, silyl dienol ether 55 derived from an a,b-unsaturated aldehyde reacts with acetal 54 selectively at the gposition to give d-alkoxy-a,b-unsaturated aldehydes 56, albeit in low yields. Because titanium(IV) chloride is strongly acidic, polymerization of silyl dienol ether 55 proceeds. In these reactions addition of tetraisopropoxytitanium(IV) to titanium(IV) chloride increases the yield dramatically [28a] – vitamin A is successfully synthesized by utilizing this aldol reaction of silyl dienol ether 55 (Scheme 3.2) [28b]. When this reaction was further investigated using trimethylsilyltrifluoromethanesulfonate (Me3 SiOTf ) as Lewis acid some interesting results were reported. Me3 SiOTf-mediated aldol reaction of silicon enolates and acetals tends to give syn-b-methoxy ketones as a major products, irrespective of the stereochemistry of the silicon enolate double bond, except for the (Z) silicon enolate of tert-butyl ethyl ketone 57 (Table 3.3) [29]. Because they are even more nucleophilic than silyl enol ethers, silyl ketene acetals 58, derived from carboxylic esters, react with ketones and aldehydes in the presence of titanium(IV) chloride to give b-hydroxy esters 59 in high yields (Eq. (26)) [30, 31]. Although the Reformatsky reaction is well known as a good synthetic tool for synthesis of b-hydroxy esters, the titanium(IV) chloride-mediated reaction is a milder and more versatile method for synthesis of a-substituted b-hydroxy esters. OSiMe3
O R1
R2
+
R3
OR R4 58
HO
1) TiCl4
5
2) H2O
R
O
1
R2 3 4 R R 59
OR5
ð26Þ
After the discovery of aldol reactions of silyl enolates with carbonyl compounds or acetals, as described above, silyl enolates become one of the most popular carbon nucleophiles in organic synthesis and are also employed for other reactions such as Michael reaction [32], Mannich reaction [33], etc.
3.3 Crossed Aldol Reactions Using Silicon Enolates Tab. 3.3
Me3 SiOTf-catalyzed aldol reaction of acetals and silicon enolates. R1
OSiMe3 R3
MeO +
R2
Entry
Silyl Enol Ether
R4
O
Me3SiOTf (cat.)
OMe
R
R5
Acetal
Product O
OSiMe3
syn/anti
OMe
OMe
1 Ph
OMe R5 4 2 3R R R
1
Ph
92:8
OMe 86% O
OSiMe3
OMe
OMe
2 i-Pr
i-Pr
86:14
OMe 95% O OMe
OSiMe3
3 Ph
Ph
OMe
Ph
Ph
84:16
OMe 97% O
OSiMe3
4
Ph
OMe Ph
OMe
Ph
Ph
71:29
OMe 83% O
OSiMe3
5
t-Bu 57
OMe Ph
OMe
t-Bu
Ph
5:95
OMe 94%
[34]. Silyl enolates are superior to other metal enolates in isolation, regioselective formation, and unique reactivity under mild conditions. 3.3.2
Lewis Acid-catalyzed Aldol Reactions of Silicon Enolates
Initially, the titanium(IV) chloride-mediated aldol reaction of silyl enolates with aldehydes was investigated [20] and a catalytic amount of trityl salt 60 (e.g. trityl perchlorate) was found to promote the aldol reaction (Eq. (27)) [35]. Whereas the original reaction is performed by using a stoichiometric amount of titanium(IV) chloride, 5–10 mol% trityl salt is sufficient to drive the aldol reaction to completion. One interesting finding in this catalytic reaction is that the silicon enolate reacts with aldehydes to give the corresponding aldol adducts as their silyl ethers 61.
143
144
3 Boron and Silicon Enolates in Crossed Aldol Reaction
OSiMe3 1
R CHO
+
R
2
Me3SiO
TrX 60 (cat.)
R
R3 +
O R3
1
ð27Þ
2
R 61
–
TrX = Ph3C X X = ClO4, SbCl6, OTf, PF6, etc.
The aldol reaction of a variety of silyl enolates and acetals in the presence of a catalytic amount (1–10 mol%) of trityl perchlorate proceeded efficiently to afford b-methoxy ketone in high yield. In the presence of trityl tetrafluoroborate catalyst, the reaction of dithioacetal 62 with silyl enol ethers affords b-ethylthio ketones 63 (Eq. (28)) [36].
R1
OSiMe3
SEt +
R2
SEt
R
4
SEt O TrBF4
R1
R3
R4 R
62
2
ð28Þ
3
R 63
A specific combination of two weak acids, tin(II) chloride and chlorotrimethylsilane, is found to serve as an effective catalyst for the aldol reaction [37]. Neither chlorotrimethylsilane or tin(II) chloride has any accelerating effect at 78 C even when more than one equivalent is added. In the combined presence of catalytic amounts of chlorotrimethylsilane and tin(II) chloride, however, the aldol reaction gives the desired product in more than 90% yield (Eq. (29)). It is supposed that the cationic silyl species generated by coordination of the chloride to the tin(II) atom catalyzes the aldol reaction. Because a similar cationic silicon Lewis acid, trimethylsilyl triflate, is known to catalyze aldol reactions of silicon enolates [38], and several other unique Lewis acid catalysts have also been reported (e.g. lanthanide catalysts [39]). Water-stable Lewis acids such as lanthanide triflates, which catalyze the aldol reaction in aqueous solvent or pure water, have received much attention in the development of economical and environmentally benign synthetic methods [40]. 1) SnCl2-Me3SiCl (10 mol%)
OSiMe3 +
–78 °C PhCHO
O
OH Ph ð29Þ
2) H3O+
Silicon enolate-mediated aldol reactions are performed by other activation methods. The aldol reaction is performed by using a catalytic amount of tetrabutylammonium fluoride (TBAF) or tris(diethylamino)sulfonium difluorotrimethylsiliconate (TASF) (Table 3.4) [41]. Aldehydes undergo this
3.3 Crossed Aldol Reactions Using Silicon Enolates Tab. 3.4
TBAF-catalyzed aldol reaction of silicon enolates [41d]. R
1
OSiMe3 R3 R2
Entry
O +
H
Silyl Enol Ether (Geometric Purity, %)
O
Bu4NF (cat.) R4
THF, -72 °C
Aldehyde
R4 R2 R3
Product (Diastereomer Ratio)
O
OSiMe3
O
Ph
O
PhCHO
O +
Ph
O
O
O
OSiMe3
:
O
OSiMe3
O
:
O
O
(97)
Ph 36)
OH
H
Ph (35
OH
+
:
(64
OSiMe3
71) O
Ph
(97)
Ph
OH
PhCHO
OH
+
:
(29
OSiMe3
14) O
Ph
(83)
PhCHO
OH n-Pr
OH
PhCHO
H
3)
n-Pr + (86
8
i-Pr
OH
n-PrCHO
7
OH
i-Pr + (97
6
Ph 7)
OH
i-PrCHO
5
OH
Ph
:
(93
OSiMe3
56)
OH
Ph
OH Ph
:
(44
(93)
4
O +
Ph
OSiMe3
14)
OH
PhCHO (89)
Ph
:
(86
OSiMe3
OH
+
Ph
(97)
2
O
OH
PhCHO
1
3
OH
R1
O +
OH
H :
Ph 65)
145
3 Boron and Silicon Enolates in Crossed Aldol Reaction
146
R
1
OSiMe3 R3 R
2
O
F Me3SiF
R 64
O
O
R4CHO
R3
R1
R
R 65
O
R4 R R2 67
4
F
3
R
OSiMe3 R4
1 2
R R 66
3
H
3
O
H
O
Me3SiF R
R2
2
R1
O
1
R3 R1 O
R2
R4
68
Scheme 3.3
Reaction mechanism for fluoride ion-catalyzed aldol reaction of silicon enolates.
type of aldol reaction quite readily (aromatic aldehydes gives aldol products more effectively than aliphatic aldehydes), whereas ordinary aliphatic and aromatic ketones form no aldol products. This reaction is considered to proceed through a catalytic cycle involving reversible steps (Scheme 3.3). A naked enolate 64 generated by the reaction of silicon enolate and fluoride ion reacts with aldehydes to aldol dianion 65. Rapid chemical trapping of unstable aldol anions 65 with Me3 SiF to form 66 serves to drive this reaction in the forward direction. Often, especially with sterically demanding enolates, syn aldol adducts are obtained irrespective of enolate geometry; this is ascribed to an extended open transition state 67. Recently, another open ‘‘skew’’ transition state 68 has been considered for less hindered enolates [42]. Preparation of Anhydrous Tetrabutylammonium Fluoride (TBAF) [41e]. Tetrabutylammonium fluoride, which is commercially available as its trihydrate, was dried over P2 O5 (30–40 C, 0.5 mmHg, overnight). Typical Procedure for the TBAF-catalyzed Aldol Reaction (Eq. (30)) [41a] O
OSiMe3
OH
TBAF (10 mol%) + 48
Ph
PhCHO
ð30Þ
49
A mixture of the trimethylsilyl enolate 48 of cyclohexanone and benzaldehyde (1:1.1 mol ratio) was added in one portion to a solution of TBAF (10 mol%) in THF at 78 C under argon. The resulting mixture was stirred at the same temperature for 3.5 h and poured into hexane. The hexane solu-
3.3 Crossed Aldol Reactions Using Silicon Enolates
tion was washed with water, dried, and concentrated to give aldol silyl ether in 80% yield. The aldol silyl ether was dissolved in a 1:9 mixture of 1 m HCl and methanol and left to stand at room temperature for 5 min. The solution was diluted with 1:1 hexane–ether and treated with water. The organic layer was dried and concentrated to give the almost pure desired aldol adduct 49. Trimethylsilyl enolates are also activated by transmetalation to the corresponding metal enolates by use of MeLi [43], transition metal catalysts [44, 45], etc. [46]. 3.3.3
Non-catalyzed Aldol Reactions of Silicon Enolates
Specially designed silicon enolates which readily form hypervalent silicates react with aldehydes in the absence of catalysts. These include: trichlorosilyl enolates 69 (Eq. (31)) [47], dimethyl(trifloxy)silyl enolate 70 (Eq. (32)) [48], enoxysilacyclobutanes 71 (Eq. (33)) [49], and dimethylsily enolates 72 (Eq. (34)) [50]. Owing to the electron-withdrawing group (69 and 70), the less sterically demanding group (72), or angle strain (71) on silicon, Lewis acidity of the silicon is increased. It is also reported that O-silyl enol derivatives of amides 73 (O-silyl ketene N,O-acetals) undergo non-catalyzed aldol reaction with aldehydes (Eq. (35)) [51]. OSiCl3 OMe 69
OH O + PhCHO CH2Cl2, 0 °C
O
OSiMe2(OTf)
Me2Si(OTf)2
Ph
i-Pr2NEt
Ph
ð31Þ
OMe 98% O Ph
Ph
OH
PhCHO Ph
-78 °C 70
88% syn/anti = 91:9
ð32Þ R3 Si OH O
R3 Si O X
R2
+
R4CHO
OSiMe2H +
R4
X R 1 R2
R1 71 X = OR, SR, NR2
1) DMF, 50 °C, 48 h PhCHO
O
OH Ph
2) MeOH-HCl 72
ð33Þ
79% syn/anti = 58:42
ð34Þ
147
148
3 Boron and Silicon Enolates in Crossed Aldol Reaction
O
OSiEt3
CH2Cl2 + PhCHO
Me2N
Me2N
-30 °C, 4 h
73
OSiEt3 Ph
ð35Þ
80% syn/anti = 1:1.8
It is also known that non-catalyzed aldol reactions using silyl ketene acetals proceed at high temperature [52], or in H2 O [53], DMSO, DMF, and DME [54], or under high pressure [55]. 3.3.4
Lewis Base-catalyzed Aldol Reactions of Trimethylsilyl Enolates
Since 1973, many Lewis acid-catalyzed aldol reactions have been studied, as described above. There have, however, been few examples of Lewis basecatalyzed aldol reaction using special silyl enolates, e.g. phosphoramidecatalyzed aldol reactions of trichlorosilyl enolates 69 (Eq. (36)) [47] and CaCl2 -catalyzed reactions of dimethylsilyl enolates 72 in aqueous DMF (Eq. (37)) [56].
OSiCl3 OMe 69
OH O + t-BuCHO
OMe
ð36Þ
CD2Cl2 : 50% conversion (120 min) CD2Cl2+HMPA: 100% conversion (<3 min)
OSiMe2H + 72
t-Bu
CaCl2 (cat.) PhCHO
O
OH Ph
DMF 30 °C, 24 h
ð37Þ
90% syn/anti = 45:55
New challenges were then made to develop useful Lewis base-catalyzed aldol reactions of trimethylsilyl enolates, simple and the most popular silicon enolates. It has recently been found that aldol reactions of trimethylsilyl enolates with aldehydes proceed smoothly under the action of a catalytic amount of lithium diphenylamide or lithium 2-pyrrilidone in DMF or pyridine (Eq. (38)) [57]. This Lewis base-catalyzed aldol reaction of trimethylsilyl enolates [58] has an advantage over acid-catalyzed reactions in that aldol reaction of carbonyl compounds with highly-coordinative functional groups with Lewis acid catalysts are smoothly catalyzed by Lewis bases to afford the desired aldol adducts in high yields.
3.3 Crossed Aldol Reactions Using Silicon Enolates
149
O OSiMe3 R1CHO
R
+
2
R
LiNPh2 or
(cat.)
LiN
4
DMF or pyridine
R3
HO R
O R4
1
R2
R
3
R4 = R, OR, SR
ð38Þ
Preparation of the 0.1 M Solution of Lithium Pyrrolidone in DMF. A solution of MeLi (1.14 m in ether, 0.52 mL, 0.59 mmol) was added to a solution of pyrrolidone (55.3 mg, 0.65 mmol) in THF at 0 C. The solvents were removed in vacuo and DMF (5.9 mL) was added to the residue. Typical Experimental Procedure for Lithium 2-Pyrrolidone-catalyzed Aldol Reaction (Eq. (39)) [57b,c] O O
OSiMe3 H +
OMe
Me2N
LiN
(10 mol%)
Me3SiO
O OMe
DMF, –45 °C, 1 h
74
Me2N
75 97%
ð39Þ A solution of ketene silyl acetal 74 (146 mg, 0.84 mmol) in DMF (0.8 mL) was added to a solution of lithium pyrrolidone in DMF (0.1 m, 0.6 mL, 0.06 mmol) at 45 C and a solution of aldehyde (89.5 mg, 0.60 mmol) in DMF (1.6 mL) was then added. The reaction mixture was stirred at the same temperature for 1 h and the reaction was then quenched by adding saturated NH4 Cl. The mixture was extracted with diethyl ether, and the combined organic extracts were washed with brine, dried over Na2 SO4 , filtered, and concentrated. The crude product was purified by preparative TLC (hexane–ethylacetate, 3:1) to give the silylated aldol adduct 75 (187 mg, 96%). 3.3.5
Diastereoselective Synthesis of Polyoxygenated Compounds
Stereoselective aldol reaction of the trimethylsilyl enolate of methyl 2benzyloxyacetate 76 with enantiomerically pure trialkoxy aldehyde 77 is performed by using three equivalents of MgBr2 aEt2 O as activator to afford an aldol adduct 78 in a high yield and excellent diastereoselectivity, whereas conventional Lewis acids such as TiCl 4 and SnCl 4 give the desired aldol
3 Boron and Silicon Enolates in Crossed Aldol Reaction
150
OBn
OBn
+ H
Me3SiO OMe
OSiMe2t-Bu O
OBn
OSiMe2t-Bu O
OH OPMB
77
BnO
78
O
AcO
O
TBSO
BzHN
O H HO BzO OAc
O OH
OBn
OH
O
Ph PMBO
OBn
MeO
toluene, –19 °C
OPMB
76
MgBr2-OEt2
Taxol® Scheme 3.4
Diastereoselective aldol reaction for preparing an acyclic polyoxy molecule 78.
product 78 in low yields [59, 60]. This method has been used as a key step in the construction of the B-ring system of an antitumor agent, Taxol (Scheme 3.4) [61]. Diastereoselective Aldol Reaction Mediated by Magnesium Bromide–Diethyl Ether Complex (Eq. (40)) [61c] OBn Me3SiO
OBn + H
OMe 76
OTBS O
OPMB 77
MgBr2-OEt2 toluene, –19 °C
OBn
OBn
MeO
OTBS O
OH OPMB 78
ð40Þ A solution of ketene trimethylsilyl acetal 76 (6.30 g, 24.9 mmol) in toluene (30 mL) and a solution of aldehyde 77 (8.10 g, 16.6 mmol) in toluene (30 mL) were successively added to a suspension of magnesium bromide– diethyl ether complex (12.9 g, 49.9 mmol) in toluene (100 mL) at 19 C. The reaction mixture was stirred for 1 h at 19 C then triethylamine (23 mL) and saturated aqueous NaHCO3 were added. The mixture was extracted with diethyl ether and the combined organic extracts were washed with brine, dried over Na2 SO4 , filtered, and concentrated. The crude product was purified by column chromatography (silica gel, hexane–ethyl acetate, 9:1) to afford the aldol adduct 78 (9.60 g, 87%) as a colorless oil. 3.3.6
Asymmetric Aldol Reactions Using Chiral Tin(II) Lewis Acid Catalysts
The asymmetric aldol reaction is one of the most powerful tools for the construction of new carbon–carbon bonds by controlling the absolute con-
3.3 Crossed Aldol Reactions Using Silicon Enolates
151
figurations of newly formed chiral centers [62]. Among asymmetric aldol reactions that mediated by silicon enolate has been extensively studied by many research groups over the past two decades. Stoichiometric Enantioselective Aldol Reaction Many aldehydes react with the (E) silicon enolate [63] derived from propionic acid thioester 79, to give syn aldol adducts in high yield and with perfect stereochemical control, by combined use of tin(II) triflate, chiral diamine 80, and dibutyltin acetate (Eq. (41)) [64–66] 3.3.6.1
OSiMe3 RCHO +
SEt
OH O
Sn(OTf)2 + 80 + n-Bu2Sn(OAc)2 R
CH2Cl2, –78 °C
79
N Me
SEt
R
syn
N H 80
OH O +
R2
R3 O O S CF3 TfO O O N
R1
N
anti 70–96% yield syn/anti = 100/0, >98% ee
Sn
O Sn nBu AcO n Bu 81 Assumed three-component Promoter
ð41Þ The formation of an active complex 81 consisting of three components, tin(II) triflate, chiral diamine 80, and dibutyltin acetate is assumed in these aldol reactions. The three-component complex would activate both aldehyde and silyl enolate (double activation), i.e. the chiral diamine-coordinated tin(II) triflate activates aldehyde while oxygen atoms of the acetoxy groups in dibutyltin acetate interact with the silicon atom of the silicon enolate. Because it has been found that the reaction does not proceed via tin(II) or tin(IV) enolates formed by silicon–metal exchange, silicon enolate is considered to attack the aldehydes directly [65]. The problem of this aldol reaction is that (Z) enolates [63] react with aldehydes more slowly, consequently affording the aldols in lower yield and with lower diastereo- and enantioselectivity. Because optically active molecules containing 1,2-diol units are often observed in nature (e.g. carbohydrates, macrolides, polyethers), asymmetric aldol reaction of the silyl enolate of a-benzyloxythioacetate 82 with aldehydes has been investigated for simultaneous introduction of two vicinal hydroxy groups with stereoselective carbon–carbon bond-formation. It has, interestingly, been found that the anti-a,b-dihydroxy thioester derivatives 83 are
SEt
3 Boron and Silicon Enolates in Crossed Aldol Reaction
152
obtained in high yields with excellent diastereo- and enantioselectivity by combined use of tin(II) triflate, chiral diamine 84, and dibutyltin acetate (Eq. (42)) [67]. These results are unusual, because aldol reaction of simple silyl enolate 79 with aldehydes generally affords syn aldol adducts as mentioned above (Eq. (41)). Consideration of the transition states of these aldol reaction leads us to postulate the coordination of the oxygen atom of the silyl enolate 82 by the tin atom of tin(II) triflate, which is essential for anti selectivity.
anti-selective aldol reaction
OSiMe3 RCHO
+
SEt
BnO
N N 84 Et Sn(OTf)2 , n-Bu2Sn(OAc)2 CH2Cl2, –78 °C
OH O R
82
SEt OBn syn-83
OH O +
R
SEt OBn anti-83
syn/anti = 2/98–1/99 95–98% ee (anti )
ð42Þ To examine this hypothesis silicon enolate 85, which has bulky tertbutyldimethylsilyl group, was prepared, to prevent coordination of the a oxygen atom to tin(II). As expected, syn aldol 86 is obtained in high stereoselectivity by reaction of the above-mentioned hindered silicon enolate 85, tin(II) triflate, a chiral diamine 87, and dibutyltin acetate (Eq. (43)) [68].
syn-selective aldol reaction N Pr OSiMe3 RCHO +
SEt
TBSO
85
N 87 OH O
Sn(OTf)2 , n-Bu2Sn(OAc)2 CH2Cl2, –78 °C
R
SEt OTBS syn-86
OH O +
R
SEt OTBS anti-86
syn/anti = 88/12–97/3 82–94% ee (syn)
ð43Þ It is, therefore, possible to prepare syn and anti aldols selectively when the appropriate protecting group is chosen for the alkoxy part of the molecule. This method has been applied to the synthesis of several monosaccharides including branched, deoxy, and amino sugars [69]. One example is shown below (Scheme 3.5) [69c].
CHO +
3.3 Crossed Aldol Reactions Using Silicon Enolates
153
O CH3
O
N N Me Sn(OTf)2 Bu2Sn(OAc)2
HO 1) OsO4 (cat.) NMO
OH O
+
SEt
OSiMe3
O
OBn 2) H2S gas 85% yield HO H 3C syn/anti = <2/>98 97% ee (anti )
SEt OBn 82
OH OBn 88
O
OH OBn 89 72% yield 88/89 = 72/28
DIBAL-H 88
H2, Pd/C
O CH3
O CH3
OH
CH2Cl2, –78 °C HO OH OBn 71% yield
EtOH quant.
HO
OH
OH OH
6-deoxy-L-talose Scheme 3.5
Stereoselective synthesis of 6-deoxy-l-talose.
Typical Procedure for Stoichiometric Enantioselective Aldol Reaction Using a Chiral Tin(II) Catalyst System (Eq. (44)) [67]
N Et OSiMe3 PhCHO
+
SEt
BnO 82
N 84 OH O
Sn(OTf)2 , n-Bu2Sn(OAc)2 CH2Cl2, –78 °C
Ph
SEt OBn syn-90
OH O +
Ph
SEt OBn anti-90
syn/anti = 1/99 96% ee (anti)
ð44Þ Dibutyltindiacetate (0.44 mmol) was added at room temperature to a solution of tin(II) triflate (0.4 mmol) and (S)-1-ethyl-2-[(piperidin-1-yl)methyl]pyrrolidine 84 (0.48 mmol) in dichloromethane (1 mL). The mixture was stirred for 30 min then cooled to 78 C. Dichloromethane solutions (0.5 mL) of the silyl enol ether of S-ethyl 2-benzyloxyethanethioate 82 (0.4 mmol) and benzaldehyde (0.27 mmol) were added successively. The reaction mixture was further stirred for 20 h then quenched with aqueous NaHCO3 . After the usual work up the desired aldol adduct 90 was obtained in 83% yield (syn/anti ¼ 1:99, 96% ee (anti)).
154
3 Boron and Silicon Enolates in Crossed Aldol Reaction
* N TfO
RCHO
N Sn
OTf O
+ OSiMe3 N 79
EtS
*
EtS
OSiMe3 R 92
N
TfO Sn O O EtS 91 + Me3SiOTf
R
* N
N
=
N Me
N H 80
Fig. 3.6
Proposed catalytic cycle.
Catalytic Enantioselective Aldol Reaction As described above, optically active aldol adducts are easily obtained by using a stoichiometric amount of chiral diamine, tin(II) triflate, and dibutyltin acetate. To perform the enantioselective aldol reaction by using a catalytic amount of the chiral catalyst, transmetalation of initially formed tin(II) alkoxide 91 to silyl alkoxide 92 with silyl triflate is an essential step (Figure 3.6). When the aldol reaction was conducted simply by reducing the amount of the chiral catalyst, aldol adducts were obtained with low stereoselectivity because SnaSi exchange occurs slowly and undesired Me3 SiOTf-promoted aldol reaction affords racemic aldol adducts. To keep the concentration of trimethylsilyl triflate as low as possible during the reaction a dichloromethane solution of silyl enolate and aldehyde was added slowly to the solution of the catalyst 80 (20 mol%), and the aldol product 92 was obtained in good yields with high enantioselectivity (Eq. (44)) [70]. Selectivity is improved by using propionitrile as solvent instead of dichloromethane. The rate of metal exchange between SnaSi is faster in propionitrile than in dichloromethane [71]. After the first reports of the above-mentioned highly efficient catalytic enantioselective aldol reaction, some groups independently reported catalytic symmetric aldol reactions of silicon enolates with aldehydes using chiral boron [72], titanium [73], zirconium [74], and copper Lewis acids [75], or by transmetalation to chiral Pd(II) enolates [44]. Chiral phosphoramidepromoted aldol reactions of trichlorosilyl enol ethers have been reported as Lewis base-catalyzed asymmetric aldol reactions [76]. 3.3.6.2
References
Typical Procedure for Catalytic Enantioselective Aldol Reaction Using a Chiral Tin(II) Catalyst System (Eq. (45)) [71]
OSiMe3 + RCHO
EtS
N N H Me 80 Sn(OTf)2 (20 mol%) EtCN, –78 °C
79
O
OSiMe3
EtS
ð45Þ
R
92 syn/anti = 89/11~100/0 89~>98% ee (syn)
(S)-1-Methyl-2-[(N-naphthylamino)methyl]pyrrolidine 80 (0.088 mmol) in propionitrile (1 mL) was added to a solution of tin(II) triflate (0.08 mmol, 20 mol%) in propionitrile (1 mL). The mixture was cooled to 78 C and a mixture of silyl ketene acetal 79 (0.44 mmol) and an aldehyde (0.4 mmol) was then added slowly over 3 h. The mixture was further stirred for 2 h, then quenched with saturated aqueous NaHCO3 . After the usual work up the aldol-type adduct was isolated as the corresponding trimethylsilyl ether 92.
References 1 Mukaiyama, T.; Inomata, K.; Bull. Chem. Soc. Jpn. 1971, 44,
2
3
4 5
6
3215. The mechanism shown in this paper was corrected as mentioned in reference 2. (a) Mukaiyama, T.; Inomata, K.; Muraki, M.; J. Am. Chem. Soc. 1973, 95, 967. (b) Inomata, K.; Muraki, M.; Mukaiyama, T.; Bull. Chem. Soc. Jpn. 1973, 46, 1807. Review: (a) Mukaiyama, T.; Org. React. 1982, 28, 203. (b) Cowden, C. J.; Paterson, I.; Org. React. 1997, 51, 1. (c) Kim, B. M.; Williams, S. F.; Masamune, S.; in Comprehensive Organic Synthesis, (B. M. Trost, Ed.), Pergamon Press, London, 1991. (d) Evans, D. A.; Nelson, J. V.; Taber, T. R.; Topics Stereochem. 1982, 13, 1. From a-iodoketones and Et3 B: Aoki, Y.; Oshima, K.; Utimoto, K.; Chem. Lett. 1995, 463. From a-iodoketones with 9-BBN and 2,6-lutidine; (a) Mukaiyama, T.; Imachi, S.; Yamane, K.; Mizuta, M.; Chem. Lett. 2002, 698. (b) Mukaiyama, T.; Takuwa, T.; Yamane, K.; Imachi, S.; Bull. Chem. Soc. Jpn. 2003, 76, 813. Interestingly, some boron enolates were isolated by distillation. See: Hoffmann, R. W.; Ditrich, K.; Froech, S.; Tetrahedron 1985, 41, 5517, and 5b. (a) Mukaiyama, T.; Inoue, T.; Chem. Lett. 1976, 559. (b) Inoue, T.; Uchimaru, T.; Mukaiyama, T.; Chem. Lett. 1977,
155
156
3 Boron and Silicon Enolates in Crossed Aldol Reaction
7
8
9 10
11 12 13
14
15
16
17
153. (c) Inoue, T.; Mukaiyama, T.; Bull. Chem. Soc. Jpn. 1980, 53, 174. (a) Masamune, S.; Mori, S.; Van Horn, D. E.; Brooks, D. W.; Tetrahedron Lett. 1979, 1665. (b) Van Horn, D. E.; Masamune, S.; Tetrahedron Lett. 1979, 2229. (c) Evans, D. A.; Cherpeck, R. E.; Tanis, S.; unpublished results. (a) Evans, D. A.; Nelson, J. V.; Vogel, E.; Taber, T. R.; J. Am. Chem. Soc. 1981, 103, 3099. (b) Evans, D. A.; Vogel, E.; Nelson, J. V.; J. Am. Chem. Soc. 1979, 101, 6120. (c) Hirama, M.; Masamune, S.; Tetrahedron Lett. 1979, 2225. (d) Hirama, M.; Garvey, D. S.; Lu, L. D.-L.; Masamune, S.; Tetrahedron Lett. 1979, 3937. The degree of (E),(Z)-selection depends on the structure of carbonyl compounds to some extent. The highest priority designation is assigned to the OBR2 group concerning enolate substituents. (a) Abiko, A.; Liu, J.-F.; Masamune, S.; J. Org. Chem. 1996, 61, 2590. (b) Abiko, A.; J. Synth. Org. Chem. Jpn. 2003, 61, 26. (c) Abiko, A.; Org. Synth. 2002, 79, 116. (a) Brown, H. C.; Ganesan, K.; Dhar, R.; J. Org. Chem. 1993, 58, 147. (b) Abiko, A.; Org. Synth. 2002, 79, 103. Evans, D. A.; Bartroli. J.; Shih, T. L.; J. Am. Chem. Soc. 1981, 103, 2127. (a) Masamune, S.; Choy, W.; Kerdesky, F. A. J.; Imperiali, B.; J. Am. Chem. Soc. 1981, 103, 1566. (b) Meyers, A. I.; Yamamoto, Y.; J. Am. Chem. Soc. 1981, 103, 4278. (c) Meyers, A. I.; Yamamoto, Y.; Tetrahedron 1984, 40, 2309. (d) Oppolzer, W.; Pure Appl. Chem. 1988, 60, 39. (e) Oppolzer, W.; Blagg, J.; Rodriguez, I.; J. Am. Chem. Soc. 1990, 112, 2767. (a) Meyers, A. I.; Yamamoto, Y.; Tetrahedron 1984, 40, 2309. (b) Masamune, S.; Sato, T.; Kim, B.-M.; Wollman, T. A.; J. Am. Chem. Soc. 1986, 108, 8279. (c) Reetz, M. T.; Rivadeneira, E.; Niemeyer, C.; Tetrahedron Lett. 1990, 27, 3863. (d) Corey, E. J.; Kim, S. S.; J. Am. Chem. Soc. 1990, 112, 4976. (e) Gennari, C.; Hewkin, C. T.; Molinari, F.; Bernardi, A.; Comotti, A.; Goodman, J. M.; Paterson, I.; J. Org. Chem. 1992, 57, 5173. (f ) Gennari, C.; Moresca, D.; Vieth, S.; Vulpeti, A.; Angew. Chem., Int. Ed. Engl. 1993, 32, 1618. (a) Inoue, T.; Liu, J.-F.; Buske, D. C.; Abiko, A.; J. Org. Chem. 2002, 67, 5250. (b) Abiko, A.; Liu, J.-F.; Masamune, S.; J. Am. Chem. Soc. 1997, 119, 2586, and references are cited therein. (c) Abiko, A.; Org, Synth. 2002, 79, 116. (d) Abiko, A.; J. Synth. Org. Chem. Jpn. 2003, 61, 24. (a) Walker, M. A.; Heathcock, C. H.; J. Org. Chem. 1991, 56, 5747. (b) Oppolzer, W.; Lienard, P.; Tetrahedron Lett. 1993, 34, 4321. These phenomena had already been experienced in the former research of developing new reactions such as new-type 1,4addition polymerization. (a) Mukaiyama, T.; Fujisawa, T.; Hyugaji, T.; Bull. Chem. Soc. Jpn. 1962, 35, 687. (b) Mukaiyama, T.; Fujisawa, T.; Nohira, H.; Hyugaji, T.; J. Org. Chem. 1962, 27, 3337. (c) Mukaiyama, T.; Fujisawa, T.; Macromol. Synth. 1972, 4, 105. (d) Fujisawa, T.; Tamura, Y.; Mukaiyama, T.; Bull. Chem. Soc. Jpn. 1964, 37, 793. (e)
References
18 19 20
21
22 23
24
25
26 27 28 29 30 31 32
33
34 35
Nohira, H.; Nishikawa, Y.; Mukaiyama, T.; Bull. Chem. Soc. Jpn. 1964, 37, 797. (f ) Mukaiyama, T.; Sato, K.; Bull. Chem. Soc. Jpn. 1963, 36, 99. Mukaiyama, T.; Angew. Chem. Int. Ed. 1977, 16, 817. Brownbridge, P.; Synthesis 1983, 1, 85. (a) Mukaiyama, T.; Narasaka, K.; Banno, K.; Chem. Lett. 1973, 1011. (b) Mukaiyama, T.; Banno, K.; Narasaka, K.; J. Am. Chem. Soc. 1974, 96, 7503. (a) Isler, O.; Schudel, P.; Adv. Org. Chem. 1963, 14, 115. (b) Effenberger, F.; Angew. Chem. Int. Ed. Engl. 1969, 8, 295. House, H. O.; Modern Synthetic Reactions, 2nd edn, W. A. Benjamin, Menlo Park, 1972. (a) Banno, K.; Mukaiyama, T.; Chem. Lett. 1975, 741. (b) Banno, K.; Mukaiyama, T.; Bull. Chem. Soc. Jpn. 1976, 49, 2284. (a) Chan, T. H.; Aida, T.; Lau, P. W. K.; Gorys, V.; Harpp, D. N.; Tetrahedron Lett. 1979, 4029. (b) Dubois, J.-E.; Axiotis, G.; Bertounesque, E.; Tetrahedron Lett. 1984, 25, 4655. (c) Heathcock, C. H.; Hug, K. T.; Flippin, L. A.; Tetrahedron Lett. 1984, 25, 5973. (d) Gennari, C.; Beretta, M. G.; Bernardi, A.; Moro, G.; Scolastico, C.; Todeschini, R.; Tetrahedron 1986, 42, 893. (a) Myers, A. G.; Widdowson, K. L.; J. Am. Chem. Soc. 1990, 112, 9672. (b) Myers, A. G.; Widdowson, K. L.; Kukkola, P. J.; J. Am. Chem. Soc. 1992, 114, 2765. Denmark, S. E.; Lee, W.; J. Org. Chem. 1994, 59, 707. Mukaiyama, T.; Hayashi, M.; Chem. Lett. 1974, 15. (a) Mukaiyama, T.; Ishida, A.; Chem. Lett. 1975, 319. (b) Mukaiyama, T.; Ishida, A.; Chem. Lett. 1975, 1201. Murata, S.; Suzuki, M.; Noyori, R.; J. Am. Chem. Soc. 1980, 102, 3248. Saigo, K.; Osaki, M.; Mukaiyama, T.; Chem, Lett. 1975, 989. Saigo, K.; Osaki, M.; Mukaiyama, T.; Chem, Lett. 1976, 769. (a) Narasaka, K.; Soai, K.; Mukaiyama, T.; Chem. Lett. 1974, 1223. (b) Narasaka, K.; Soai, K.; Aikawa, Y.; Mukaiyama, T.; Bull. Chem. Soc. Jpn. 1976, 49, 779. (c) Saigo, K.; Osaki, M.; Mukaiyama, T.; Chem. Lett. 1976, 163. (d) Danishefsky, S.; Vaughan, K.; Gadwood, R. C.; Tsuzuki, K.; J. Am. Chem. Soc. 1980, 102, 4262. (e) Jung, M. E.; Pan, Y.-G.; Tetrahedron Lett. 1980, 21, 3127. (f ) Jung, M. E.; McCombs, C. A.; Takeda, Y.; Pan, Y.-G.; J. Am. Chem. Soc. 1981, 103, 6677. (g) Heathcock, C. H.; Norman, M. H.; Uehling, D. E.; J. Am. Chem. Soc. 1985, 107, 2797. (a) Ishitani, H.; Ueno, M.; Kobayashi, S.; J. Am. Chem. Soc. 1997, 119, 7153. (b) Kobayashi, S.; Ishitani, H.; Ueno, M.; J. Am. Chem. Soc. 1998, 120, 431. (c) Ishitani, H.; Ueno, M.; Kobayashi, S.; J. Am. Chem. Soc. 2000, 122, 8180, and references are cited therein. [4þ2]cycloaddition reactions, alkylations, acylations, hydroborations, oxidative processes, etc. (a) Mukaiyama, T.; Kobayashi, S.; Murakami, M.; Chem. Lett. 1985, 447. (b) Kobayashi, S.; Murakami, M.; Mukaiyama, T.; Chem. Lett. 1985, 1535.
157
158
3 Boron and Silicon Enolates in Crossed Aldol Reaction 36 Ohshima, M.; Murakami, M.; Mukaiyama, Y.; Chem. Lett.
1985, 1871. 37 Iwasawa, N.; Mukaiyama, T.; Chem. Lett. 1987, 463. 38 (a) Murata, S.; Suzuki, M.; Noyori, R.; Tetrahedron 1988, 44,
39
40
41
42
43 44
45 46 47 48 49
50 51 52
53 54 55
4259. (b) Muraki, C.; Hashizume, S.; Nagami, K.; Hanaoka, M.; Chem. Pharm. Bull. 1990, 38, 1509. (a) Vougioukas, A. E.; Kagan, H. B.; Tetrahedron Lett. 1987, 28, 5513. (b) Gong, L.; Streitwieser, A.; J. Org. Chem. 1990, 55, 6235. (c) Kobayashi, S.; Hachiya, I.; Takahori, T.; Synthesis 1993, 371. (d) Kobayashi, S.; Hachiya, I.; Ishitani, H.; Araki, M.; Synlett 1993, 472. (e) Kobayashi, S.; Hachiya, I.; J. Org. Chem. 1994, 59, 3590. (a) Kobayashi, S.; Nagayama, S.; Busujima, T.; J. Am. Chem. Soc. 1998, 120, 8287. (b) Kobayashi, S.; Hachiya, I.; J. Org. Chem. 1994, 59, 3590. (c) Loh, T.-P.; Chua, G.-L.; Vittal, J. J.; Wong, M.-W.; Chem. Commun. 1998, 861. (d) Manabe, K.; Kobayashi, S.; Synlett 1999, 547. (a) Noyori, R.; Yokoyama, K.; Sakata, J.; Kuwajima, I.; Nakamura, E.; J. Am. Chem. Soc. 1977, 99, 1265. (b) Noyori, R.; Nishida, I.; Sakata, J.; J. Am. Chem. Soc. 1981, 103, 2106. (c) Kuwajima, I.; Nakamura, E.; Acc. Chem. Res. 1985, 18, 181. (d) Nakamura, E.; Yamago, S.; Machii, D.; Kuwajima, I.; Tetrahedron Lett. 1988, 29, 2207. (e) Yamago, S.; Machii, D.; Nakamura, E.; J. Org. Chem. 1991, 56, 2098. (a) Nakamura, E.; Yamago, S.; Machii, D.; Kuwajima, I.; Tetrahedron Lett. 1988, 29, 2207. (b) Yamago, S.; Machii, D.; Nakamura, E.; J. Org. Chem. 1991, 56, 2098. Stork, G.; Hudrlik, P. F.; J. Am. Chem. Soc. 1968, 90, 4462. (a) Sodeoka, M.; Ohrai, K.; Shibasaki, M.; J. Org. Chem. 1995, 60, 2648. (b) Sodeoka, M.; Tokunoh, R.; Miyazaki, F.; Hagiwara, E.; Shibasaki, M.; Synlett 1997, 463. ¨ ger, J.; Carreira, E. M.; J. Am. Chem. Soc. 1998, 120, (a) Kru 837. (b) Fujimura, O.; J. Am. Chem. Soc. 1998, 120, 10032. Transmetalation to boron enolates: Wada, M.; Chem. Lett. 1981, 153. Also see ref. 41c. Denmark, S. E.; Stavenger, R. A.; Acc. Chem. Res. 2000, 33, 432. Kobayashi, S.; Nishido, K.; J. Org. Chem. 1993, 58, 2647. (a) Myers, A. G.; Kephart, S. E.; Chen, H.; J. Am. Chem. Soc. 1992, 114, 7922. (b) Denmark, S. E.; Griedel, B. D.; Coe, D. M.; Schnute, M. E.; J. Am. Chem. Soc. 1994, 116, 7026. Miura, K.; Sato, H.; Tamaki, K.; Ito, H.; Hosomi, A.; Tetrahedron Lett. 1998, 39, 2585. Myers, A. G.; Widdowson, K. L.; J. Am. Chem. Soc. 1990, 112, 9672. (a) Creger, P. L.; Tetrahedron Lett. 1972, 79. (b) Kita, Y.; Tamura, O.; Itou, F.; Yasuda, H.; Kishino, H.; Ke, Y. Y.; Tamura, Y.; J. Org. Chem. 1988, 53, 554. (a) Loh, T.-P.; Feng, L.-C.; Wei, L.-L.; Tetrahedron, 2000, 56, 7309. (b) Lubineau, A.; J. Org. Chem. 1986, 51, 2142. Ge´nisson, Y.; Gorrichon, L.; Tetrahedron Lett. 2000, 41, 4881. Yamamoto, Y.; Maruyama, K.; J. Am. Chem. Soc. 1983, 105, 6963.
References 56 Miura, K.; Nakagawa, T.; Hosomi, A.; J. Am. Chem. Soc.
2002, 124, 536. 57 (a) Fujisawa, H.; Mukaiyama, T.; Chem. Lett. 2002, 182. (b)
58
59 60
61
62
63 64 65 66 67 68 69
70 71 72
Fujisawa, H.; Mukaiyama, T.; Chem. Lett. 2002, 858. (c) Mukaiyama, T.; Fujisawa, H.; Nakagawa, T.; Helv. Chim. Acta 2002, 85, 4518. As another example, 20 mol% of tris(2,4,6trimethoxyphenyl)phosphine catalyzed the aldol reaction of trimethylsilyl ketene acetals. See: Matsukawa, S.; Okano, N.; Imamoto, T.; Tetrahedron Lett. 2000, 41, 103. Fujisawa, H.; Sasaki, Y.; Mukaiyama, T.; Chem. Lett. 2001, 190. Magnesium halide-mediated aldol reactions: (a) Takai, K.; Heathcock, C. H.; J. Org. Chem. 1985, 50, 3247. (b) Uenishi, J.; Tomozane, H.; Yamato, M.; Tetrahedron Lett. 1985, 26, 3467. (c) Bernardi, A.; Cardani, S.; Colonbo, L.; Poli, G.; Schimperna, G.; Scolastico, C.; J. Org. Chem. 1987, 52, 888. (d) Corey, E. J.; Li, W.; Reichard, G. A.; J. Am. Chem. Soc. 1998, 120, 2330. (a) Mukaiyama, T.; Shiina, I.; Iwadare, H.; Sakoh, H.; Tani, Y.; Hasagawa, M.; Saitou, K.; Proc. Jpn. Acad. 1997, 73B, 95. (b) Mukaiyama, T.; Shiina, I.; Iwadare, H.; Saitoh, M.; Nishimura, T.; Ohkawa, N.; Sakoh, H.; Nishimura, K.; Tani, Y.; Hasegawa, M.; Yamada, K.; Saitoh, K.; Chem. Eur. J. 1999, 5, 121. (c) Shiina, I.; Shibata, J.; Ibuka, R.; Imai, Y.; Mukaiyama, T.; Bull. Chem. Soc. Jpn. 2001, 74, 113. Review: (a) Carreira, E. M.; in Comprehensive Asymmetric Catalysis, (Jacobsen, E. N.; Pfaltz, A.; Yamamoto, H.; eds), Springer, Heidelberg, 1999, Vol. 3, p. 998. (b) Mahrwald, R.; Chem. Rev. 1999, 99, 1095. (c) Gro¨ger, H.; Vogl, E. M.; Shibasaki, M.; Chem. Eur. J. 1998, 4, 1137. (d) Nelson, S. G.; Tetrahedron: Asymmetry 1998, 9, 357. (e) Bach, T.; Angew. Chem. Int. Ed. Engl. 1994, 33, 417. The highest priority is assigned to OSiR3 group concerning enolate substituents. Kobayashi, S.; Mukaiyama, T.; Chem. Lett. 1989, 297. Kobayashi, S.; Uchiro, H.; Fujishita, Y.; Shiina, I.; Mukaiyama, T.; J. Am. Chem. Soc. 1991, 113, 4247. Mukaiyama, T.; Kobayashi, S.; J. Organomet. Chem. 1990, 382, 39. Mukaiyama, T.; Uchiro, H.; Shiina, I.; Kobayashi, S.; Chem. Lett. 1990, 1019. Mukaiyama, T.; Shiina, I.; Kobayashi, S.; Chem Lett. 1991, 1902. (a) Kobayshi, S.; Onozawa, S.; Mukaiyama, T.; Chem. Lett. 1992, 2419. (b) Mukaiyama, T.; Anan, H.; Shiina, I.; Kobayahi, S.; Bull. Soc. Chim. Fr. 1993, 130, 388. (c) Mukaiyama, T.; Shiina, I.; Kobayashi, S.; Chem, Lett. 1990, 2201. Mukaiyama, T.; Kobayashi, S.; Uchiro, H.; Shiina, I.; Chem. Lett. 1990, 129. Kobayashi, S.; Fujishita, Y.; Mukaiyama, T.; Chem. Lett. 1990, 1455. (a) Furuta, K.; Maruyama, T.; Yamamoto, H.; J. Am. Chem.
159
160
3 Boron and Silicon Enolates in Crossed Aldol Reaction
73
74 75
76
Soc. 1991, 113, 1041. (b) Parmee, E. R.; Tempkin, O.; Masamune, S.; Abiko, A.; J. Am. Chem. Soc. 1991, 113, 9365. (c) Furuta, K.; Maruyama, T.; Yamamoto, H.; Synlett 1991, 439. (d) Kiyooka, S.; Kaneko, Y.; Kume, K.; Tetrahedron Lett. 1992, 33, 4927. (a) Mikami, K.; Matsukawa, M.; J. Am. Chem. Soc. 1994, 116, 4077. (b) Mikami, K.; Matsukawa, M.; J. Am. Chem. Soc. 1993, 115, 7039. (c) Mikami, K.; Pure Appl. Chem. 1996, 68, 639. (d) Keck, G. E.; Krishnamurthy, D.; J. Am. Chem. Soc. 1995, 117, 2363. (e) Carreira, E. M.; Singer, R. A.; Lee, W.; J. Am. Chem. Soc. 1994, 116, 8837. (f ) Singer, R. A.; Carreira, E. M.; J. Am. Chem. Soc. 1995, 117, 12360. (g) Carreira, E. M.; Singer, R. A.; Lee, W.; J. Am. Chem. Soc. 1995, 117, 3649. Ishitani, H.; Yamashita, H.; Shimizu, H.; Kobayashi, S.; J. Am. Chem. Soc. 2000, 122, 5403. Evans, D. A.; Murry, J. A.; Kozlowski, M. C.; J. Am. Chem. Soc. 1996, 118, 5814. (b) Evans, D. A.; Kozlowski, M. C.; Tedrow, J. S.; Tetrahedron Lett. 1997, 42, 7481. (c) Evans, D. A.; Kozlowski, M. C.; Burgey, C. S.; MacMillan, D. W. C.; J. Am. Chem. Soc. 1997, 119, 7893. (d) Evans, D. A.; MacMillan, D. W. C.; Campos, K. R.; J. Am. Chem. Soc. 1997, 119, 10859. Denmark, S. E.; Winter, S. B. D.; Su, X.; Wong, K.-T.; J. A. Chem. Soc. 1996, 118, 7404. (b) Denmark, S. E.; Wong, K.-T.; Stavenger, R. A.; J. Am. Chem. Soc. 1997, 119, 2333.
161
4
Amine-catalyzed Aldol Reactions Benjamin List 4.1
Introduction
Aldolizations can be catalyzed by both Lewis and Brønsted acids and bases [1]. This catalytic diversity is possible because aldol reactions combine a nucleophilic addition, which is acid-catalyzed, with an enolization, which is catalyzed by both acids and bases (Scheme 4.1). Nature’s aldolases use combinations of acids and bases in their active sites to accomplish direct asymmetric aldolization of unmodified carbonyl compounds. Aldolases are distinguished by their enolization mode – Class I aldolases use the Lewis base catalysis of a primary amino group and Class II aldolases use the Lewis acid catalysis of a Zinc(II) cofactor. To accomplish enolization under essentially neutral, aqueous conditions, these enzymes decrease the pK a of the carbonyl donor (typically a ketone) by converting it into a cationic species, either an iminium ion (5) or an oxonium ion (8). A relatively weak Brønsted base co-catalyst then generates the nucleophilic species, an enamine- (6) or a zinc enolate (9), via deprotonation (Scheme 4.2). Although chemists also use acids and bases to catalyze aldolizations, the aldolase-like direct catalytic asymmetric aldol reaction remained an illusive challenge for a long time. Indirect aldol reactions utilizing preformed enolate equivalents provided the only viable strategy for catalytic asymmetric aldol synthesis [2–10]. Among the first purely chemical direct asymmetric aldol catalysts were bifunctional Lewis acid-Brønsted base metal complexes that resemble class II aldolases [11–17]. Amino acids that mimic the enamine catalysis of class I aldolases have also been studied. Initially, these efforts have concentrated on proline-catalyzed enantiogroup differentiating intramolecular aldolizations [18–28]. More recently the first direct aminecatalyzed asymmetric intermolecular aldol reactions have been described [29–33]. This chapter reviews both asymmetric and non-asymmetric aminocatalytic intra- and intermolecular aldolizations. Not included here are
Modern Aldol Reactions. Vol. 1: Enolates, Organocatalysis, Biocatalysis and Natural Product Synthesis. Edited by Rainer Mahrwald Copyright 8 2004 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim ISBN: 3-527-30714-1
162
4 Amine-catalyzed Aldol Reactions
Brønsted Base Brønsted-or Lewis Acid
O
Brønsted-or Lewis Acid
O
O
OH
H
Lewis Base (Amine)
1
2
3
Scheme 4.1
Catalysis of the aldol reaction.
Class I Aldolases
O
H
4
Class II Aldolases
O
Enzyme B H
N
O
H
N
Enzyme BH
5
6
Enzyme Zn(II) B
Enzyme Zn(II) BH
O
H 7
8
9
Scheme 4.2
Two enzymatic strategies for enolization of carbonyl compounds.
other interesting organocatalysts of the aldol reaction, for example simple tertiary amine Brønsted bases and phase-transfer type quaternary ammonium salts [34–36]. Mechanistically related class I aldolases and catalytic antibodies have been fundamentally important in the development of the reactions described below and are discussed in another chapter of this book.
4.2
Aminocatalysis of the Aldol Reaction
Although aminocatalysis of the aldol reaction via enamine intermediates is an important enzymatic strategy and several bioorganic studies of the subject have appeared, applications in preparative organic synthesis, particularly in intermolecular aldol addition reactions, have been published only sporadically. Despite the often-used Mukaiyama-aldol reaction of enol ethers and Stork’s well-developed enamine chemistry [37, 38], aldolizations of preformed enamines are rare. One report describes Lewis acid-catalyzed aldolizations of preformed enamines with aldehydes that furnish aldol addition products [39]. Aldol condensation reactions of preformed enamines with aldehydes have also been described [40]. Only enamine-catalytic aldolizations, which are primary and secondary amine-catalyzed aldol reactions, will be discussed in this chapter, however.
4.2 Aminocatalysis of the Aldol Reaction
O
O
amine
O
OH
2 aq. buffer
H
H
10
(1)
H 11
O
OH
amine aq. buffer
13 O
O H 14
amine R
12 O 2
(2) 14 O
OH
15
(3)
R
aq. buffer 16
Scheme 4.3
Some amine-catalyzed aldolizations in aqueous buffers.
4.2.1
Intermolecular Aldolizations
Class I aldolase-like catalysis of the intermolecular aldol reaction with amines and amino acids in aqueous solution has been studied sporadically throughout the last century. Fischer and Marschall showed in 1931 that alanine and a few primary and secondary amines in neutral, buffered aqueous solutions catalyze the self-aldolization of acetaldehyde to give ‘‘aldol’’ (11) and crotonaldehyde (12) (Scheme 4.3, Eq. (1)) [41]. In 1941 Langenbeck et al. found that secondary amino acids such as sarcosine also catalyze this reaction [42]. Independently, Westheimer et al. and other groups showed that amines, amino acids, and certain diamines catalyze the retroaldolization of ‘‘diacetone alcohol’’ (13) and other aldols (Scheme 4.3, Eq. (2)) [43–47]. More recently Reymond et al. [48] studied the aqueous amine catalysis of cross-aldolizations of acetone with aliphatic aldehydes furnishing aldols 16 (Scheme 4.3, Eq. (3)) and obtained direct kinetic evidence for the involvement of enamine intermediates. It is believed that amine-catalyzed aldolizations, in a manner similar to class I aldolase-catalyzed reactions, proceed via a catalytic cycle that involves formation of (A) carbinolamine-, (B) iminium ion-, and (C) enamine intermediates (Scheme 4.4). Either the enamine generation or the subsequent CaC-bond-forming step (D) are rate limiting. Water addition to give a new carbinolamine (E) and its fragmentation (F) close the catalytic cycle. Houk and Bahmanyar have used density functional theory calculations to investigate transition states of the CaC-bond-forming step in aminecatalyzed aldolizations (Scheme 4.5) [49, 50]. Accordingly, the cyclic transition state of the primary amine-catalyzed aldol reaction has a half-chair conformation featuring NaHaO hydrogen-bonding for charge stabilization (A). In secondary amine-catalyzed aldol reactions the calculated zwitterionic transition state (B) is somewhat higher in energy and leads to an oxetane
163
164
4 Amine-catalyzed Aldol Reactions
+ H+ -H2O
N
R1
OH
N R1
B
R1 O
-H+ A
C N
HN R2
R1 OH
O
R2
R1 F
D
R1 E N R2 +H2O H OH OH O
+ R2CHO N
R1
Scheme 4.4
The enamine catalytic cycle for aldolizations.
d+
N H H
O H
N H
+
d
d-
O H
A
N H
d-
O H3O+ H
B
C
Scheme 4.5
DFT calculation-based transition states for primary (A) and secondary (B, C) aminecatalyzed aldolizations.
intermediate in an overall [2 þ 2] cycloaddition reaction. When an external proton source was included (C), the reaction was found to have no barrier and led directly to the iminium ion intermediate (Scheme 4.5). Aldehyde Donors Despite these mechanistic and theoretical studies, intermolecular aminecatalyzed aldolizations have only rarely been used on a preparative scale. A few noteworthy exceptions in which aldehydes are used as donors are shown in Scheme 4.6 [51–55]. These reactions are often performed neat or in the presence of small amounts of an organic solvent. The catalyst usually used is either a primary or secondary amine, a combination of an amine with a carboxylic acid, or simply an amino acid. These catalyst systems have previously been used in the Knoevenagel condensation and it is apparent that synthetic amine-catalyzed aldolizations originate from Knoevenagel’s chemistry [56]. A Mannich-type condensation mechanism involving an iminium ion electrophile similar to the aminocatalytic Knoevenagel reaction has recently been proposed for the amine-catalyzed self-aldolization of propionaldehyde (Eq. (6)) [55]. Although this mechanism is not unreasonable it should be 4.2.1.1
4.2 Aminocatalysis of the Aldol Reaction
2
O
Piperidine (1 mol%)
17
AcOH (1 mol%) EtOH
H Ph
O
19
20 1 eq
O
AcOH (10 mol%)
O
H
CO2Me
H 19
22
1-2 eq
1 eq
OH CO2Et
(2)
21 50% Dimethylamine (10 mol%)
O
(1)
Ph 18 35%
H
CO2Et
1.2 eq
Ph
H
Diethylamine (10 mol%)
O
H
O
O
OH
H
CO2Me
O
MeNHCH2CO2H (10 mol%),
(3)
23 56%
H
CO2Me
then Ac2O, ∆
(4)
24 84%
H 25 1 eq
Pyrrolidine (10 mol%)
O
O H C6H13
2
Ph
26 1.5 eq
AcOH (2 mol%)
O
Pyrrolidine (20 mol%)
19
PhCO2H (10 mol%) PhMe
H
O H
Ph C6H13 27 75%
(5)
O (6)
H 28 90%
Scheme 4.6
Preparative amine-catalyzed intermolecular aldolizations with aldehyde donors.
noted that aldol addition products are often isolated in such reactions (e.g. Eqs. (2)–(4)). Obviously, a Mannich-type mechanism has to be excluded in such cases. In general both, the iminium ion Mannich-type mechanism and the aldolase-type enamine mechanism are plausible and seem to be energetically comparable. Which of these two mechanisms actually operates in a given reaction depends on the donor component: In Knoevenagel-type reactions where easily enolized low-pK a malonate-type donors are used, primary and secondary amine catalysis most probably involves activation of the carbonyl acceptor as an iminium ion. In amine-catalyzed aldol reactions of aldehyde and ketone donors, which have higher pK a (i.e. acetone pK a ¼ 20, propionaldehyde pK a ¼ 17), activation of the donor as an enamine predominates.
165
4 Amine-catalyzed Aldol Reactions
166
O
O
O
Diethylamine (cat.)
NH
O
(1)
O EtOH, rt
N H 30 1 eq
Br 29 1 eq
Br Piperidine (cat.)
N H 33 1 eq O
32 1 eq
31 87%
OHC
O
OH
O (2) NH
EtOH, 175°C 5 min
34 61%
Piperidine, AcOH
O
O
O (3)
OHC reflux, 60 h 14
36
35 1 eq
Solvent O OHC O 37 1 eq
Ph
O Ph (4)
Ph C6H6
38 2 eq O
57%
Piperidine, AcOH (cat.)
39 O 40%
O CO2H
14 Solvent
40 1 eq
O
OH
(5)
CO2H
rt, 48 h
Morpholine (10 mol%)
O
O
Piperidine
41 O
O N (6)
H 26
42 1 eq O
Ph
1 eq OHC
F3C 46
45 2 eq
1 eq
Ph
i. C6H6,reflux, 10h ii. distillation
43
Piperidine, AcOH (cat.) THF, 0°C
Ph 44 8%
52% O
(7)
F3C 47 80%
Scheme 4.7
Some secondary amine-catalyzed intermolecular aldolizations with ketone donors.
Ketone Donors Ketone donors have only rarely been used in amine-catalyzed aldolizations. Selected examples that have been published over the last 70 years are shown in Scheme 4.7 [57–68]. The aminocatalysts used are the same that are also used when aldehydedonors are employed. Aldehydes and ketones can be used as acceptors and 4.2.1.2
4.2 Aminocatalysis of the Aldol Reaction
O
O
EnolendoAldolization
O
OH (1)
n
n
48 O O
O
49 OH
EnolexoAldolization
(2) n
n
50
51
Scheme 4.8
The two modes of intramolecular aldolization.
aldol addition and condensation products have been isolated. Apparently, aunbranched aliphatic aldehydes have never been used as acceptors in nonasymmetric reactions with ketone donors. Morpholine-catalyzed Aldolization of Cyclopentanone with Benzaldehyde to Give Enone 43 [40]. Cyclopentanone (37 g, 0.5 mol), morpholine (4.4 g, 0.05 mol, 10 mol%), and benzaldehyde (53 g, 0.5 mol) were heated under reflux in dry benzene (100 mL) for 10 h using a Dean–Stark trap. The resulting crude product was distilled to furnish enone 43 (45 g, 52%, Bp.0:05 ¼ 115– 120 C). 4.2.2
Intramolecular Aldolizations
There are two types of intramolecular aldol reaction, enolendo and enolexo aldolizations (Scheme 4.8, Eqs. (1) and (2), respectively). Both types can be catalyzed by amines and several examples have been published. Enolexo Aldolizations One of the earliest aminocatalytic intramolecular aldolizations was applied in Woodward’s 1952 total synthesis of steroids [69]. A 5-enolexo aldol condensation established the D-ring of the steroid skeleton. Hexanedial 52 on treatment with a catalytic amount of piperidinium acetate gave cyclopentenal 53 (Scheme 4.9). 4.2.2.1
CHO CHO
H H O
CHO
Piperidine (cat.) AcOH (cat.) C6H6, 1h, 60 °C 66%
52
Scheme 4.9
An intramolecular amine-catalyzed aldolization in Woodward’s total synthesis of steroids.
H H O
53
167
168
4 Amine-catalyzed Aldol Reactions
CHO H
OHC
H
Bn2NH.TFA (20 mol%)
OHC
OMEM O
THPO
OMEM 50°C, C6H6 64%
THPO
O
54
55 i. OsO4 ii. NaIO4
O
OHC
Pyrrolidine, AcOH Toluene, RT
S
57 OHC
S
58% OTBS 58
Piperidine, AcOH (cat.) C6H6, ∆
CHO
(3)
S
S
OHC
(2)
O
iii. Pyrrolidine, AcOH 69%
56
OHC
(1)
TBSO 59 OHC (4)
59%
MeOC 60 CHO
61 OAc
Piperidine AcOH (cat.) THF, H2O
MeOC
OHC
OAc (5)
HO 62
63
Scheme 4.10
Amine-catalyzed 5-enolexo aldolizations.
Since then amine-catalyzed 5-enolexo aldolizations have been applied in a variety of other synthetic contexts (Scheme 4.10) [70–75]. Typically, they constitute part of a strategy for the ring contraction of cyclohexenes to cyclopentenes via oxidative cleavage and aldolization (Eq. (2)). As in intermolecular aldol reactions, amine-catalyzed 5-enolexo aldolizations can either lead to aldol condensation (Eqs. (1)–(4)) or addition products (Eq. (5)). These reactions usually involve an aldehyde group as the aldol donor; the corresponding amine-catalyzed 5-enolexo aldolizations of ketone donors have so far not been realized. The acceptor carbonyl group can either be an aldehyde or a ketone. The regioselectivity of aminocatalytic aldolizations of ketoaldehydes such as 60 and 62 contrasts with that of the corresponding Brønsted base-
4.2 Aminocatalysis of the Aldol Reaction Piperidine, AcOH(cat.) C6H6, ∆
OHC (1)
CHO 65
O aq. KOH, Et2O, rt
64
O (2) 66
Scheme 4.11
Contrasting regioselectivity of amine- and base-catalyzed 5-enolexo aldolizations.
catalyzed processes. Similarly, ketoaldehyde 64 on treatment with piperidinium acetate in benzene gave only enal 65, whereas treatment with aq. KOH in ether furnished mainly its regioisomer 66 (Scheme 4.11) [76]. The regioselectivity of the amine-catalyzed process might reflect a high aldehyde enamine (67) to ketone enamine (68) ratio, because of steric hindrance (A 1;3-strain) in the ketone enamine (Scheme 4.12). In the base-
O Piperidine
CHO KOH
64 OK
N O
Me
O
Me
H
H 65
H
H 70
67
OK N O
H
H Me
68 Scheme 4.12
Rationalization of the contrasting regioselectivity of amine- and base-catalyzed aldolizations.
O
H
66
69
Me
169
170
4 Amine-catalyzed Aldol Reactions
Piperidine (10%.) p-TsOH (10%) C6H6, 16h, RT
CHO COMe
CHO (1)
62%
OTBS 71
OTBS 72 CHO
CHO Et2NTMS
CHO
O
Ph O 73
O
OAc
COMe CHO
MeO
74 OAc
Piperidine AcOH C6H6, ∆
Piperidine AcOH C6H6, ∆
CHO COMe
MeO
(4)
CHO
(5)
Piperidine AcOH toluene, ∆
O
(6)
41%
81
82 CHO CHO
83
OMe SiMe2Ph 78 CHO
THPO 80 H
H
O
AcO MeO2C
CHO
65%
77 SiMe2Ph + CHO Bn2NH2 CF3CO2 ° toluene,110 C TBSO CHO > 70% 79
(3)
76
OMe
THPO
COMe
25%
75
TBSO
(2)
OH Ph
O
40%
CHO
Bn2NH2+ CF3CO2benzene AcO MeO2C 54%
CHO
Scheme 4.13
Amine-catalyzed 6-enolexo aldolizations.
(7)
O OH 84
4.2 Aminocatalysis of the Aldol Reaction
CO2Et 2
CH2O
MeOC 85
i. Piperidine
MeOC
COMe CO2Et
EtO2C 87
86
(1)
O
O
ii. NaOEt 50%
CO2Et
CO2Et
EtO2C 88
89
OH
O CO2Et 2
S
Piperidine CO2Et
EtO2C
CHO
MeOC 85
171
>95% S
90 91
Scheme 4.14
Amine-catalyzed 6-enolendo aldolizations in the synthesis of Hagemann’s ester (89) and aldol 91.
catalyzed reaction the more stable and sterically relatively unhindered ketone enolate (69) leading to the opposite regioisomer dominates and, in addition, its aldolization might be faster than that of the less nucleophilic aldehyde enolate (70) (Scheme 4.12). 6-Enolexo aldolizations giving aldol addition or condensation products have also been described, examples are shown in Scheme 4.13 [77–82]. Typically, aldehydes function as the aldol donor in these reactions but ketones can also be used (Eq. (6)). Both ketones and aldehydes can play the role of the acceptor carbonyl group. Enolendo Aldolizations More than the corresponding enolexo-aldolizations, amine-catalyzed 6enolendo aldol reactions have frequently been used synthetically. An early example is the synthesis of Hageman’s ester (89) from formaldehyde and acetoacetate via piperidine-catalyzed Knoevenagel–Michael–aldol tandemreaction followed by decarboethoxylation (Scheme 4.14, Eq. (1)) [83]. Related product 91 was obtained when thiophene-carbaldehyde 90 was used (Eq. (2)) [84]. 4.2.2.2
Piperidine-Catalyzed Synthesis of Aldol 91. A mixture of thiophene-2carbaldehyde (90, 8 g, 71 mmol) and ethyl acetoacetate (85, 20 g, 154 mmol, 2.1 equiv.) was cooled to 0 C and treated with five drops of piperidine under stirring. After 48 h at room temperature a solid was formed, isolated by filtration, and recrystallized twice from diethyl ether to furnish aldol 91 (fine colorless needles Mp. ¼ 106 C) in almost quantitative yield.
(2)
172
4 Amine-catalyzed Aldol Reactions
CHO
HO
O COMe Piperidine BzOH
O
O O
HO O
O O
92 Piperidine AcOH (cat.)
CO2Et O O COMe 94 CO2Et
Pyrrolidine AcOH (cat.)
COMe
O O
(2)
O 95
CO2Et (3)
MeOH,H2O, ∆ 84
COMe 96
O 97 CO2Et
Piperidine AcOH (cat.)
CO2Et COMe
C6H6, ∆ 93%
COMe 98 COMe
H O 100 N
(4) O
Pyrrolidine AcOH (cat.)
99
THF, MeOH, 23°C 93%
H
Cl
EtO2C O COMe 102
93 CO2Et
C6H6, ∆ 78%
CHO
CHO
(1)
Pyrrolidine
O (5) O
101
Cl
EtO2C N
C6H6, ∆ 85
(6)
O 103
Scheme 4.15
Selected amine-catalyzed 6-enolendo aldolizations.
Other examples of amine-catalyzed 6-enolendo aldolizations are shown in Scheme 4.15 [85–90]. In enolendo aldolizations the aldol donor is always a ketone whereas both aldehyde and ketone carbonyl groups can serve as the acceptor. Probably the most important aminocatalytic 6-enolendo aldolizations are used in the syntheses of bicyclic ketones 106 and 109 (the Wieland– Miescher ketone) from triketones 104 and 108 via pyrrolidine-catalyzed cycloaldolization (Scheme 4.16) [91–93]. Enones 106 and 109 are important intermediates in natural product synthesis, particularly as AB- and CDfragments in the synthesis of steroids. It has been convincingly demon-
4.3 Asymmetric Aminocatalysis of the Aldol Reaction
O
O O
O
105
OH O
108
OH O
O
O 106 O
N H O
n
O
104 (n=1) 107 (n=2) 110 (n=3) O
111
OH
O 109
O
O 112
Scheme 4.16
Pyrrolidine-catalyzed 6-enolendo aldolizations.
strated by Spencer et al. that these reactions involve enamine intermediates [94–97].
4.3
Asymmetric Aminocatalysis of the Aldol Reaction
The first example of an aminocatalytic asymmetric aldol reaction was the Hajos–Parrish–Eder–Sauer–Wiechert cyclization, a proline-catalyzed enantiogroup-differentiating 6-enolendo aldolization of some di- and triketones [18–21, 27, 28]. Discovered in the early 1970s this reaction was the first example of a highly enantioselective organocatalytic process. Although the significance of the Hajos–Parrish–Eder–Sauer–Wiechert reaction was recognized almost from the beginning, it was another 30 years until the first proline-catalyzed intermolecular aldol reactions were described [29–33]. 4.3.1
Intramolecular Aldolizations Enolendo Aldolizations Hajos and Parrish at Hoffmann La Roche discovered that proline-catalyzed intramolecular aldol reactions of triketones such as 104 and 107 furnish aldols 105 and 108 in good yields and with high enantioselectivity (Scheme 4.17). Acid-catalyzed dehydration of the aldol addition products then gave condensation products 106 and 109 (Eqs. (1) and (2)). Independently, Eder, Sauer, and Wiechert at Schering AG in Germany directly isolated the aldol condensation products when the same cyclizations were conducted in the presence of proline (10–200 mol%) and an acid co-catalyst (Eqs. (3) and (4)). 4.3.1.1
173
174
4 Amine-catalyzed Aldol Reactions
O
O
O
(S )-Proline (3 mol%)
O p -TsOH (1)
DMF, rt 20h 100%
O 104 O
O
(S )-Proline (3 mol%)
O
DMF, rt 72h 52%
O 107
O
O
O
O 107
OH 105 93% ee O
O 106 O
p -TsOH O
C6H6 OH 108 74% ee
O (3) O 106 84% ee O
(S )-Proline (47 mol%) 1N HClO4 CH3CN, 80°C, 25h 83%
(2) O 109
(S )-Proline (47 mol%) 1N HClO4 CH3CN, 80°C, 20h 87%
O 104 O
C6H6
(4) O 109 71% ee
Scheme 4.17
Hajos–Parrish–Eder–Sauer–Wiechert reactions.
A proline-catalyzed cyclization of ketone 107 to give enone 109 directly without added acid was described by Fu¨rst et al. [28]. Proline-Catalyzed Cyclization of Triketone 107 to Give the Wieland–Miescher Ketone (109) [28]. Crude oily trione 107 (ca. 2 mol) in DMSO (2 L) was treated with (S)-proline (11.5 g, 0.1 mol, 5 mol%) and the resulting mixture was stirred under argon at 18 C for 5 days. The solvent was removed at 70 C (0.1 torr) and the resulting dark green oil (420 g) was adsorbed on a column charged with silica (3 kg) Elution with 17% ethyl acetate in hexanes afforded 276 g product which was further purified by distillation (b.p. 108– 112 C/0.25 torr, bath temp. 150 C) to give the enantiomerically enriched ketone 109 (255 g, 1.43 mol, 72%) in 70% ee (½aD ¼ þ70 ). Proline-catalyzed enolendo aldolizations have been applied to a number of substrates, most often in steroid synthesis. Selected products from such Hajos–Parrish–Eder–Sauer–Wiechert reactions are shown in Scheme 4.18 [98–104]. Although several different catalysts have been studied in such enolendo aldolizations, proline has typically been preferred. It can, however, be advan-
4.3 Asymmetric Aminocatalysis of the Aldol Reaction
O
O
O
O
OH 113 89%, 90% ee
PhS
O
O SPh
118
116 80%, 27% ee O
OH
60%, 57% ee
64%, 90% ee
OH
PhS
O
O
120
119
47%, 16% ee
O
O
117 35% (ee n.d.)
115 76%, 81% ee
O
O
O N
2
114 71%, >99% ee
F3C
O
O
OH
O
O
O
175
O
OH 122
121 49%, 34% ee
64%, 90% ee
Scheme 4.18
Selected products from proline-catalyzed 6-enolendo aldolizations.
O (S)-Proline 1N HClO4 N
O
O
O
123
CH3CN, 80°C, 10d 67% (S)-Phenylalanine 1N HClO4
125
(2)
O
32% ee
(3)
126
95% ee
(4)
DMSO, 65°C, 5d (S)-Phenylalanine 1N HClO4
O
86% ee 124
(S)-Proline O
(1)
N
CH3CN, 80°C, 40h 82%
O
27% ee O
CH3CN, 80°C, 40h
O
Scheme 4.19
Compared with proline, phenylalanine is a superior catalyst for some intramolecular aldolizations.
tageous to use primary amino acid catalysts such as phenylalanine, particularly when non-methyl ketones are employed. For example, Danishefsky et al. found that the proline-catalyzed cyclization of triketone 123 furnished product 124 in 27% ee whereas 86% ee was obtained when phenylalanine was used as the catalyst (Scheme 4.19, Eqs. (1) and (2)) [105]. Agami et al.
176
4 Amine-catalyzed Aldol Reactions
O (S)-Proline (10 mol%) DMF
O R
O
5d <30% yield
R
127
128
R
ee %
Ph n-C5H11
47 20
Me
42
i-Pr
8
t-Bu
0
Scheme 4.20
Enantiogroup-differentiating aldol cyclodehydrations of 4-substituted 2,6heptanedions 127.
O O N HO N OH H CO2
O2C
O O
O H H N
CO2
H O
O H N H O
N H O
O O
O Crystal Surface
A
B
Hajos Model
Agami Model
D Swaminathan Model
C Houk Model
Scheme 4.21
Mechanistic models proposed for the Hajos–Parrish–Eder–Sauer–Wiechert reaction.
made similar observations in the cyclization of ketone 125 (Eqs. (3) and (4)) [106]. Attempts have been made to expand the scope of the Hajos–Parrish– Eder–Sauer–Wiechert reaction to an enantiogroup differentiating aldolization of acyclic 4-substituted 2,6-heptandiones 127 to give cyclohexenones 128 (Scheme 4.20) [107, 108]. The yield and enantioselectivity of this reaction are relatively modest compared with the parent cyclo-aldolization. Several different mechanisms have been proposed for the Hajos–Parrish– Eder–Sauer–Wiechert reaction (Scheme 4.21). These include the original Hajos model (A), which assumes activation of the acceptor carbonyl as a carbinolamine [21]; the Agami model (B), in which a side-chain enamine reacts with a ring carbonyl group, mediated by a second proline molecule [109–114]; Swaminathan’s model (C), proposing a heterogeneous mechanism [115]; and the Houk model (D), in which the side-chain enamine reacts with the ring acceptor carbonyl group, under concomitant activation via hydrogen-bonding to proline’s carboxylic acid group [25, 116, 117]. Model D has recently been supported experimentally [118]. It was shown that, in contrast to earlier reports [119], there are no non-linear (Scheme
4.3 Asymmetric Aminocatalysis of the Aldol Reaction
O
O
i. (S)-Proline (20 mol%) ii. H2SO4
O
O
O
104 O
106 O
O 107
O
(S)-Proline (20 mol%) O 109
Scheme 4.22
No non-linear effects in proline-catalyzed Hajos–Parrish–Eder–Sauer–Wiechert reactions.
4.22) or dilution effects in the asymmetric catalysis, and that prolinecatalyzed aldolizations are first order in proline. Enolexo Aldolizations Although amine-catalyzed enolexo aldolizations (Section 4.2.2.1) are relatively common and catalytic asymmetric enolendo aldolizations have been known for three decades (Section 4.3.1.1), the first catalytic asymmetric enolexo aldolizations were developed only very recently. It was discovered that a variety of achiral heptanedials (129) and 7-oxoheptanal on treatment with a catalytic amount of (S)-proline furnished anti aldols 130 with excellent enantioselectivity (Scheme 4.23) [120–122]. Whereas non-asymmetric amine-catalyzed enolexo-aldolizations often give 4.3.1.2
177
178
4 Amine-catalyzed Aldol Reactions
OH (S)-Proline (10 mol%)
OHC
OHC
R' R
R'
CH2Cl2, r.t. 8-16h
129
Dicarbonyl
OHC R 130
Yield %
ee%
dr
99
10:1
98
>20:1
97
>20:1
75 : 89 : >95 : 8
22 : 5 : 5:1
Products
OH OHC
OHC
95
OHC
130a
129a
OH OHC
OHC
Me Me
Me Me
OHC 74 130b
129b
OH OHC
OHC
OHC 75
Me Me
Me Me 130c
129c
OHC
OH
OHC
OHC 76
Me
Me
129d
130d
OH OHC
OHC 88
Me
Me
OHC Me
O
129f
1:1
99
2:1
Me 130e
meso-129e
OHC Me
99
HO Me 92
OHC
130f
Scheme 4.23
Proline-catalyzed enantioselective 6-enolexo-aldolizations.
aldol condensation products (Section 4.2.2.1), the corresponding prolinecatalyzed process selectively provides the aldol addition products. The corresponding 5-enolexo aldolizations are much less stereoselective. For example, treating hexanedial (131) with a catalytic amount of (S)-proline fur-
4.3 Asymmetric Aminocatalysis of the Aldol Reaction
CHO
OHC
(S)-Proline (10%) CH3CN, r.t., 7h
131
OH
OH
OHC
OHC
85%
132a 79% ee
2:1
132b 37% ee
Scheme 4.24
A proline-catalyzed 5-enolexo-aldolization.
nished aldol 132 with only modest diastereo- and enantioselectivity (Scheme 4.24). It can be expected that proline-catalyzed enolexo-aldolizations will find utility in natural-product synthesis and that new catalysts will eventually be discovered that lead to improved selectivity in the potentially very useful 5-enolexo variant. 4.3.2
Intermolecular Aldolizations Ketone Donors The first amine-catalyzed, asymmetric intermolecular aldol reactions were developed by List et al. in 2000 [29–33]. Initially it was found that excess acetone in DMSO containing sub-stoichiometric amounts of (S)-proline reacted with some aromatic aldehydes and isobutyraldehyde to give the corresponding acetone aldols (134) with good yields and enantioselectivity (Scheme 4.25). Particularly high ee were achieved with a-branched aldehydes. Similarly to the intramolecular enolendo variant, the only sideproduct in proline-catalyzed intermolecular aldol reactions are the condensation products (Scheme 4.25). 4.3.2.1
Proline-catalyzed Aldolization of Acetone with Isobutyraldehyde to Give Aldol 134f [29]. A mixture of (S)-proline (2.3 g, 0.02 mol, 20 mol%) and isobutyraldehyde (7.2 g, 0.1 mol) was stirred in acetone (40 mL) and dry DMSO (160 mL) at room temperature. The mixture became completely homogenous within ca. 1 h. After 36 h at room temperature (S)-proline (ca. 2.0 g, 87%) precipitated and was recovered for reuse via filtration, washing with ethyl acetate, and drying. The combined organic solvents were washed with half-concentrated ammonium chloride solution and the aqueous layers were back-extracted with ethyl acetate. The organic layers were dried (MgSO4 ), filtered, and concentrated. Column chromatography on SiO2 (20% ethyl acetate in hexanes) furnished (R)-4-hydroxy-5-methyl-hexan-2-one (134f, 12.0 g, 0.92 mol, 92%) as a colorless liquid. The ee was determined to be 96% by chiral stationary phase HPLC analysis (Chiralpak AS, 2% iPrOH in hexanes, 1 mL min1 , tðRÞ ¼ 18:0 min, tðSÞ ¼ 20:1 min).
179
180
4 Amine-catalyzed Aldol Reactions
(S)-Proline (20-30 mol%)
O RCHO
Aldehyde
Yield %
134 ee%a
Product O
OHC
R
DMSO, r.t.
133
14 excess
OH
O
OH 76
68 134a O OH
NO2
133a OHC
NO2 72b
62 133b OHC
O
134b OH 65
74 133c
134c
Br Cl
O
OH
OHC
Br Cl 69
94 134d 133d
O
OH
OHC 77
54 134e 133e O OHC
OH 96
97 134f
133f
O
OH
OHC 84
63 134g 133g OHC
O
OH >99
81 134h
133h OHC 133i
O
OH >99
85 134i
a)The enantiomeric excess was typically determined using chiral stationary phase HPLCanalysis (Chiralpak AS, not AD as originally reported). b) The originally reported ee of 134b (60%) has been corrected.
Scheme 4.25
Proline-catalyzed asymmetric intermolecular aldolizations of acetone with aromatic- and a-branched aldehydes.
4.3 Asymmetric Aminocatalysis of the Aldol Reaction
O RCH2CHO 14 excess Aldehyde
(S)-Proline (10-20 mol%)
Yield %
136
Product
67
135a
136a OH
O
73
35 135b
136b O
OHC
OH 72
34 135c
136c O
OHC
OH
34 135d
OH 36
22 135e
73
136d O
OHC
ee%
OH
31
OHC
OH R
Acetone or CHCl3, r.t.
135
O
OHC
O
136e
Scheme 4.26
Proline-catalyzed aldolizations of acetone with a-unbranched aldehydes.
a-Unbranched aldehydes (135) proved to be extremely challenging substrates under the original conditions. Self-aldolization of the aldehyde was a major side reaction. It was found later that by using acetone or acetone– CHCl3 mixtures instead of the commonly used DMSO as solvents, and 10– 20 mol% proline as catalyst, the cross-aldol products (136) could be isolated in modest yields and with acceptable enantioselectivity (Scheme 4.26) [123]. The new reaction conditions effectively suppressed aldehyde selfaldolization. The main side product was now the corresponding acetone cross aldol condensation product, typically formed in comparable yields with the desired aldol addition product. Proline-catalyzed Aldolization of Acetone with n-Hexanal to Give Aldol 136b [31]. n-Hexanal (2.40 mL, 20 mmol) and (S)-proline (230 mg, 2 mmol, 10 mol%) were stirred in 100 mL dry acetone for 168 h. Silica gel (ca. 5 g) was added and the mixture was evaporated. The residue was poured on to a preloaded silica gel column and chromatographed with hexanes–ethyl acetate (4:1) to give (E)-non-3-en-2-one (1.37 g, 49%) and aldol 136b (1.11 g, 35%) in 73% ee (AS, 2% 2-propanol–hexanes, 1 mL min1 , tðRÞ ¼ 13:3 min,
181
182
4 Amine-catalyzed Aldol Reactions
O
1. TBSCl 2. ArNTf2
OH
OTf OTBS
57% 136d
137 SnBu3 Pd0 (cat.)
OH
TBAF
95%
OTBS
90% (S )-Ipsenol (139)
138
Scheme 4.27
Asymmetric synthesis of (S )-ipsenol.
O O
14
O (S)-Proline (30 mol%)
O H
O O
O
DMSO
O 140
OH O O O
O O
141 (>99% de)
Scheme 4.28
Application of a proline-catalyzed intermolecular aldolization in the synthesis of carbohydrate derivatives.
tðSÞ ¼ 15:7 min). Almost identical results were obtained using an aqueous work-up (phosphate buffered saline–ethyl acetate). At the time these relatively modest results represented the state-of-theart in direct catalytic asymmetric aldolizations with a-unbranched aldehyde acceptors. Neither Shibasaki’s nor Trost’s bimetallic catalysts, the only alternative catalysts available, gave superior results. Moreover, even nonasymmetric amine-catalyzed cross aldolizations with a-unbranched acceptors are still unknown. That the practicality of the process can compensate for the modest yield and enantioselectivity was illustrated by a straightforward synthesis of the natural pheromone (S)-ipsenol (139) from aldol 136d, featuring a high-yielding Stille coupling (Scheme 4.27). A highly stereoselective proline-catalyzed acetone aldol reaction has recently been used in the synthesis of sugar derivatives such as 141 (Scheme 4.28) [124]. Proline-catalyzed aldolizations with ketones other than acetone have also been described. Because the ketone component is typically used in large excess, one is limited to readily available and inexpensive smaller ketones such as butanone, cyclopentanone, cyclohexanone, and hydroxyacetone. Depending on the aldehyde component excellent enantio- and
4.3 Asymmetric Aminocatalysis of the Aldol Reaction O
O
(S)-Proline R'CHO
R
R 142
(10-30%) 143 Products
O
OH
144a 85% ee O OH
O
O
OH
O
OH 149a 97% ee OH Cl O
1:1
41
7:1
68
>20:1
77
3:1
62
>20:1
38
1.7:1
95
1.5:1
OH
147b 20% ee O
OH
OH
148a >99% ee OH
85
146b OH
OH
O
dr (anti/syn)
OH
O
147a 95% ee O
Yield %
145b 89% ee
OH
146a 97% ee OH
R' R 144-150
144b 76% ee O OH
145a 86% ee O
R
OH
148b O
OH
OH 149b 84% ee OH Cl O
OH
OH
150a 67% ee
150b 32% ee
Scheme 4.29
Examples of proline-catalyzed intermolecular aldolization with ketone donors other than acetone.
183
184
4 Amine-catalyzed Aldol Reactions
(anti)-diastereoselectivity can be achieved in such reactions (Scheme 4.29) [30, 31, 125]. Interestingly, the stereoselectivity of reactions of cyclohexanone with isobutyraldehyde and benzaldehyde were first predicted by using density functional theory calculations on models based on Houk’s calculated transition state of the Hajos–Parrish–Eder–Sauer–Wiechert reaction [125]. The transition states of inter- and intramolecular aldol reactions are almost superimposable and readily explain the observed enantiofacial selectivity. Relative transition state energies were then used to predict the diastereo- and enantioselectivity of the proline-catalyzed reactions of cyclohexanone with isobutyraldehyde and benzaldehyde. The predictions are compared with the experimental results in Scheme 4.30. The good agreement clearly validates the theoretical studies, and provides support for the proposed mechanism. Additional density functional theory calculation also support a similar mechanism [126, 127]. The exceptionally high stereoselectivity found in proline-catalyzed aldol reactions involving hydroxyacetone has recently been used in a total synthesis of brassinolide (156), a steroidal plant-growth regulator [128]. Readily available aldehyde 151 underwent proline-catalyzed aldolization with hyO H
H O
NO O H R
H
O
OH
H O
O
HO N O OH R
R
OH
R
R
R = i-Pr
98.5% (>99%)
<1% (<1%)
R = Ph
46.5% (54.5%)
44% (44.5%)
O
Theoretical prediction and experimental verification of diastereo- and enantioselectivity of proline-catalyzed aldolizations.
HO N O OH
H
H
R
OH
O
OH
R
<1% (<1%) 6% (0.1%)
Experiment (Density functional theory calculation) Scheme 4.30
OH R
R
NO O H H
O
(S)-Proline DMSO
O
R
1.5 (<1%) 3.5% (0.8%)
4.3 Asymmetric Aminocatalysis of the Aldol Reaction
OH O CHO H
H
H Proline (cat.) DMSO, rt, 12h
O
H H
H
84%,
OH OMe
H H
OH
153
OMe
152
151 OH OH H HO
H
OH
H
known H
OH
H
HO H
O
O Brassinolide (156)
H HO
H 154
Scheme 4.31
Formal total synthesis of brasinolide featuring a proline-catalyzed aldol reaction.
droxyacetone to give diol 153 in good yield and diastereoselectivity. This material was converted to derivative 154, a known precursor of brassinolide (Scheme 4.31). Other catalysts besides proline have also been investigated. A particularly large amount of data has been collected for the aldol reaction of acetone with p-nitrobenzaldehyde (Scheme 4.32). Simple primary a-amino acids and acyclic N-methylated a-amino acids are not catalytically active under standard reaction conditions. Of the simple cyclic amino acids studied, azetidine, pyrrolidine, and piperidine 2-carboxylate, proline is clearly the best catalyst. a-, a 0 -, and, in particular, N-methylation reduce the efficiency and whereas substitution of the 3- and 4-positions are tolerated without dramatic effects. Proline amide is essentially catalytically inactive under the standard reaction conditions (DMSO, room temperature, 2 h) but after three days, the aldol could be isolated in good yields, albeit with very low enantioselectivity. Clearly, the carboxylic acid plays an important role in the catalysis and in determining enantioselectivity. That the enantioselectivity can be improved was shown with penicillamine derivative 168, proline derived diamine salt 169, and amide 170 [129–132]. By screening a wide variety of diamines Yamamoto et al. showed that diamine salt 169 catalyzes the aldol reaction of several different ketones with p-nitrobenzaldehyde to give aldols in good yields and selectivities (Scheme 4.33) [130, 131]. Comparing results from reaction of cyclopentanone and cyclohexanone with p-nitrobenzaldhyde catalyzed by proline, 168, or diamine, 169, illus-
185
186
4 Amine-catalyzed Aldol Reactions
Catalyst
14
133a
NO2 Conditions
Catalyst
134a
Conditions
i-Pr H2N
CO2H i-Pr
N H
CO2H CO2H CO2H
CO2H N H CO2H N CO2H N H CONH2 N H
NO2
Yield %
ee %
157
30 mol% Cat., 2h, rt DMSO/Acetone (4:1)
<10
n.d.
158
30 mol% Cat., 2h, rt DMSO/Acetone (4:1)
<10
n.d.
159
30 mol% Cat., 2h, rt DMSO/Acetone (4:1)
<10
n.d.
160
30 mol% Cat., 2h, rt DMSO/Acetone (4:1)
55
40
161
30 mol% Cat., 2h, rt DMSO/Acetone (4:1)
68
76
162
30 mol% Cat., 2h, rt DMSO/Acetone (4:1)
<10
n.d.
163
30 mol% Cat., 2h, rt DMSO/Acetone (4:1)
26
61
164
30 mol% Cat., 2h, rt DMSO/Acetone (4:1) Same conditions, 72h
<10
n.d.
80
20
NH N H
OH
O
OHC
O
HO CO2H
165
30 mol% Cat., 2h, rt DMSO/Acetone (4:1)
85
78
CO2H
166
30 mol% Cat., 2h, rt DMSO/Acetone (4:1)
67
73
CO2H
167
30 mol% Cat., 24h, rt DMSO/Acetone (4:1)
<10
n.d.
CO2H
168
30 mol% Cat., 24h, rt DMSO/Acetone (4:1)
81
85
OTf H
169
3 mol% Cat., 2h, Acetone, 30°C
60
88
170
20 mol% Cat., 24h, Acetone, -25°C
66
93
N H S N H S N H S N H
N H
N O Ph
N H
HN Ph HO
Scheme 4.32
Aminocatalysts studied for reaction of acetone with p-nitrobenzaldehyde.
4.3 Asymmetric Aminocatalysis of the Aldol Reaction
H N H
O
R
N 169 (10%)
NO2
R
O
dr Yield % (anti/syn)
OH
OH
NO2
171b 5% ee O
172a 96% ee OH
-
88
0.75
97
2.85
81
1.17
NO2
NO2
OH
NO2 O
NO2
60a
OH
O
OH
173a 84% ee
NO2
Products
NO2 O
R 171-173
134a 88% ee
171a 84% ee
R
133a
O
O
OH
O
OHC
Solvent
OTf
172b 61% ee OH
173b 16% ee
NO2
a) Only 3 mol% of the catalyst was used.
Scheme 4.33
Diamine salt 169 catalyzes asymmetric aldol reactions of various ketones.
trates that it can be advantageous to use catalysts other than proline for selected reactions (Scheme 4.34). The best enantioselectivity in aminocatalytic intermolecular acetone aldolizations has recently been achieved by Tang et al. [132]. Study of selected proline-derived amides led this group to identify hydroxy amide 170 as a superb catalyst for reactions of acetone (solvent) with a variety of aldehydes (Scheme 4.35). Although the yields are typically slightly better when proline is used as the catalyst, enantioselectivity is invariably higher when amide 170 is used. The mechanism of catalysis by amide 170 has not yet been elucidated. Density functional theory calculations support activation of the aldehyde
187
188
4 Amine-catalyzed Aldol Reactions
O
R
A. B, or C R
NO2
R 133a
dr Yield (anti/syn) %
Products OH
O
171 O
OH
O
OHC
R 171-172
NO2
ee % (anti)
ee % (syn)
Conditions
73 63 88
1.7 1.6 0.8
69 63 85
63 60 5
A B C
65 65 97
1.7 1.7 2.8
89 90 96
67 69 61
A B C
NO2
OH
172
NO2
B
A CO2H N H 161 20 mol%, rt Ketone/DMSO (1:4) Solvent
S
CO2H N 168 H 20 mol%, rt Ketone/DMSO (1:4) Solvent
C H N H
N
OTf
169 10 mol%, 30°C Ketone Solvent
Scheme 4.34
Comparing yields, enantioselectivity, and diastereoselectivity of different amino catalysts in the aldolization of cyclic ketones with p-nitrobenzaldehyde.
with two simultaneous hydrogen bonds from the amide-NH and the alcohol-OH in the transition state (A, Scheme 4.36). An alternative explanation involves a protonated oxazoline which might be formed in situ via dehydration of the hydroxy amide [133]. The corresponding transition state (B) might then be very similar to that proposed for the proline- and diamine salt-catalyzed reactions. Very recently N-terminal prolyl peptides have been suggested as another attractive class of aldol catalyst. Tang et al. [132] mention in a footnote that the dipeptide ProaThraOMe catalyzes the reaction of acetone with pnitrobenzaldehyde to give the corresponding aldol in 69% ee. Reymond et al. have studied a peptide library and also found that several N-terminal prolyl peptides catalyze the same asymmetric aldolization [124]. Independently, Martin and List showed that N-terminal prolyl peptides catalyze the direct asymmetric aldol reaction of acetone with p-nitrobenzaldehyde and the asymmetric Michael reaction between acetone and b-nitrostyrene (Scheme 4.37) [135]. Mechanisms have so not yet been proposed for these reactions.
4.3 Asymmetric Aminocatalysis of the Aldol Reaction
O Ph N H O RCHO 133
14 Solvent Aldehyde
HN Ph R
(20 mol%) -25°C, 1-2 d
Yield %
OH
O
170 HO
134
Product O
ee%
OH
OHC NO2
133a OHC
93 (76)
66 (68) 134a O OH
83 (72)
51 (62) 133b
NO2
134b OH
O
OHC
133c OHC
Br
77 (74)
Cl
O
Br
OH
Cl 85 (69)
83 (94)
133d OHC
90 (65)
134c
134d OH
O
84 (77)
93 (54) 134e 133e
OHC
133f OHC
O
OH
43 (97)
98 (96)
134f O OH 98 (84)
77 (63) 134g
133g OHC
O
51 (81)
OH
>99 (>99)
134h 133h OHC 135a
12 (31)
O
OH 136a
Scheme 4.35
Hydroxyamide 170-catalyzed aldolizations of acetone with different aldehydes. Numbers in parentheses refer to the corresponding proline-catalyzed reactions.
86 (67)
189
190
4 Amine-catalyzed Aldol Reactions
Ph Ph
Ph
Ph
O H N HO
O N
O H Ph
NH O
H Ph
N B
A Scheme 4.36
Mechanistic considerations of the hydroxyamide-catalyzed aldolization.
Peptide
O NO2 14
OH
O
OHC
NO2
134a
133a Catalyst
Yield %
ee %
Ref.
H-Pro-Thr-OMe
n.r.
69
132
H-Pro-Gly-OH
99
46
134
H-Pro-Glu-Leu-Phe-OH
96
66
134
H-Pro-Aib-Glu-Phe-OH
94
37
134
H-Pro-Asp-Leu-Phe-OH
95
50
134
H-Pro-Aib-Asp-Phe-OH
97
12
134
H-Pro-Ala-OH
90
70
135
H-Pro-Trp-OH
77
65
135
H-Pro-Asp-OH
75
74
135
H-Pro-Glu-OH
72
68
135
H-Pro-Val-OH
89
70
135
H-Pro-Arg-OH
91
31
135
H-Pro-Ser-OH
87
77
135
H-Pro-LysHCl-OH
62
66
135
H-Pro-Gly-Gly-OH
68
53
135
H-Pro-His-Ala-OH
85
56
135
Scheme 4.37
N-terminal prolyl-peptides catalyze enantioselective aldolizations.
4.3 Asymmetric Aminocatalysis of the Aldol Reaction
(S)-Proline (30 mol%)
OHC
O
14
133b
O
176
(1) 134b 58%, 71% ee (62%, 72% ee in DMSO) O
178
176
[emim][OTf] 48h, rt
177
N
N
CF3
59%, 76% ee (S)-Proline (50 mol%)
CF3
OH (2)
[bmim][PF6] 24h, rt
177
OHC
OH
[bmim][PF6] 25h, rt
(S)-Proline (30 mol%)
OHC CF3
O
O
191
PF6
[bmim][PF6] (174)
O
OH
178
(3)
29%, > 98% ee
179
CF3
68%, 88% ee, dr = 99:1
N
N
CF3SO3
[emim][OTf] (175)
Scheme 4.38
Proline-catalyzed aldolizations in ionic liquids.
In addition to studying alternative catalysts, researchers have also investigated new reaction conditions for proline-catalyzed aldolizations. It has, for example, been found that the commonly used DMSO could be replaced with the room temperature ionic liquids [bmim][PF6 ] (174) or [emim][OTf ] (175) with comparable yields and selectivity (Scheme 4.38) [136–138]. The effect of solvent structure on the regioselectivity can, apparently, be quite strong as is illustrated by the reaction of butanone with p-trifluorobenzaldehyde (Scheme 4.38, Eqs. (2) and (3)). Proline-catalyzed aldolizations can also be conducted under aqueous conditions, although rates and enantioselectivity generally decrease with increasing water concentration [48, 139]. An interesting observation has been made by Peng et al., who showed that a combination of proline with sodium dodecyl sulfonate can be used as a catalyst system, indicative of catalysis in aqueous micelles (Scheme 4.39) [140]. The enantioselectivity of the reaction studied has not been reported. Proline has also been attached to a polymer support. Takemoto et al. described the first example of this approach [141]. Hydroxyproline was linked
192
4 Amine-catalyzed Aldol Reactions
O
OHC
OH
H2O
NO2 14
O
Catalyst
133a
134a
Catalyst
Conditions
Proline (40 mol%)
5d, rt
15
SDS (20%
5d, rt
12
Proline (40 mol%) + SDS (20%)
1d, rt
87
NO2
Yield %
SO3Na SDS =Sodium dodecyl sulfonate Scheme 4.39
Proline-catalyzed aldolizations in inverse micelles.
NaH
1.
HO
Cl
CO2Et N BOC
O CO2H
2. H+ 3. OH-
180
N H 181
O
O
O 181 34%
O 104
O
OH 105 18% ee
Scheme 4.40
The first polymer-supported proline-catalyst.
to a polystyrene resin and the resulting material (181) was shown to catalyze the Hajos–Parrish–Eder–Sauer–Wiechert reaction, albeit in low yield and with low enantioselectivity (Scheme 4.40). Proline has also recently been attached to a poly(ethylene glycol) support. The resulting catalyst (183) effectively catalyzes intermolecular aldolizations, a Robinson annexation, and Mannich reactions. It can be used under
4.3 Asymmetric Aminocatalysis of the Aldol Reaction
O OH
MeO-(CH2CH2O)n-CH2CH2 -O n = 110
O
182 O
O
MeO-(CH2CH2O)n-CH2CH2 -O 183
14
133f
N H
O
183
OHC
O
CO2H
O
DMSO 130 h
OH
134f 81%, >98% ee O
O
O
183 DMSO 130 h
O
O 109 55%, 75% ee
Scheme 4.41
Poly(ethylene glycol)-supported proline-catalysis.
homogenous conditions, then precipitated by solvent change and reused (Scheme 4.41) [142, 143]. Aldehyde Donors In addition to ketones, aldehydes can also be used as aldol donors in proline-catalyzed reactions [144]. Barbas et al. found that treating acetaldehyde solutions with proline provided aldehyde 185, an aldol trimer of acetaldehyde, in 84% ee and 4% yield (Scheme 4.42, Eq. (1)) [145, 146]. As shown by Jørgensen et al., other simple a-unbranched aldehydes can also be used as donors in proline-catalyzed cross aldolization with activated non-enolizable ketone acceptors to give aldols 188 in high enantioselectivity and yield (Scheme 4.42, Eq. (2)) [147]. Finally, Northrup and MacMillan found that proline to also catalyzed cross aldolizations of two different aldehydes under carefully developed conditions using syringe pump techniques [148]. These reactions furnish anti aldols 191 in excellent enantioselectivity and good yield and diastereoselectivity (Scheme 4.43). 4.3.2.2
Proline-catalyzed Aldolization of Propionaldehyde with Isobutyraldehyde to Give Aldol 191e [148]. A solution of freshly distilled propionaldehyde (1.81 mL, 25 mmol) in DMF (12.5 mL) pre-cooled to 4 C was added slowly over
193
194
4 Amine-catalyzed Aldol Reactions
(S)-Proline (cat.)
O H
185 4% yield, ee = 84%
184
(S)-Proline (50 mol%.)
O
H
E
186 R 1 eq
(1)
H
THF, 4°C
O
E
O
OH
H
CH2Cl2
R
187 1 eq
R
OH
O
3
CO2Et CO2Et
(2)
188 Yield %
ee %
Me
(188a)
90
90
Et
(188b)
91
85
i-Pr
(188c)
88
85
CH2CH=CH2
(188d)
94
88
n-C6H13
(188e)
91
84
Ph
(188f)
97
0
Scheme 4.42
Proline catalyzed aldolreactions with aldehyde donors.
the course of 20 h to a stirred suspension of isobutyraldehyde (4.54 mL, 50 mmol), (S)-proline (288 mg, 2.5 mmol, 10 mol%), and DMF (12.5 mL) at 4 C. After 30 h the resulting solution was diluted with diethyl ether and washed successively with water and brine. The combined aqueous layers were back-extracted with three portions of dichloromethane. The organic layers were combined, dried over anhydrous MgSO4 , and concentrated in vacuo. Flash chromatography (20:7 pentane–diethyl ether) afforded aldol 191e as a clear colorless oil (2.65 g, 20.6 mmol, 82%) in >99% ee and 96:4 anti:syn. ½aD ¼ 17:9 (c ¼ 1, CHCl3 ). The product ratios were determined by GLC analysis of the acetal derived from 2,2-dimethylpropane-1,3-diol on a Bodman Chiraldex b-DM column (110 C isothermal, 23 psig); (2S,3S) anti isomer t r ¼ 31:8 min, (2R,3R) anti isomer t r ¼ 33:9 min, (2R,3S) and (2S,3R) syn isomers t r ¼ 29:4, 29.8 min. The discovery of the direct enantioselective cross-aldolization of aldehydes, which not too long ago would have probably been regarded as impossible by many, can be viewed as a major breakthrough in the aldol field.
4.3 Asymmetric Aminocatalysis of the Aldol Reaction
O
(S)-Proline (10 mol%)
O
H R
H
1
R2
4°C, DMF
OH
O
R2
H R
1
191 Product Me
H
O
%Yield
dr
%ee
80
4:1
99
88
3:1
97
87
14:1
99
81
3:1
99
82
24:1
>99
80
24:1
98
75
19:1
91
OH
O
Me 191a OH Me
H
Me Me 191b OH O H Me 191c OH O H Me 191d OH O H Me 191e OH O H Bu 191f OH O H Bn 191g
Scheme 4.43
Direct asymmetric cross-aldolization of aldehydes.
Finally, aldols are made in the most atom economical and practical way without use of stoichiometric bases, auxiliaries, or other reagents. Clearly, aminocatalytic aldolizations have great potential in academic and industrial synthesis and nothing other than frequent use and further development of these methods can be expected.
195
196
4 Amine-catalyzed Aldol Reactions
References 1 C. H. Heathcock, In Comprehensive Organic Synthesis; B.
2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
18 19 20 21 22 23 24 25 26 27 28 29 30
M. Trost, I. Fleming, C. H. Heathcock, Eds.; Pergamon: Oxford, 1991; Vol. 2, pp 133. J. S. Johnson, D. A. Evans, Acc. Chem. Res. 2000, 33, 325. T. D. Machajewski, C.-H. Wong, Angew. Chem., Int. Ed. 2000, 39, 1352. B. Alcaide, P. Almendros, Eur. J. Org. Chem. 2002, 1595. S. E. Denmark, R. A. Stavenger, Acc. Chem. Res. 2000, 33, 432. S. G. Nelson, Tetrahedron: Asymmetry 1998, 9, 357. M. Shibasaki, H. Sasai, T. Arai, T. Iida, Pure Appl. Chem. 1998, 70, 1027. E. M. Carreira, R. A. Singer, Drug Discovery Today 1996, 1, 145. I. Peterson, Pure Appl. Chem. 1992, 64, 1821. S. Masamune, W. Choy, J. S. Peterson, L. R. Sita, Angew. Chem., Int. Ed. Engl. 1985, 24, 1. Y. M. A. Yamada, N. Yoshikawa, H. Sasai, M. Shibasaki, Angew. Chem., Int. Ed. Engl. 1997, 36, 1871. N. Yoshikawa, Y. M. A. Yamada, J. Das, H. Sasai, M. Shibasaki, J. Am. Chem. Soc. 1999, 121, 4168. N. Kumagai, S. Matsunaga, N. Yoshikawa, T. Ohshima, M. Shibasaki, Org. Lett. 2001, 3, 1539. B. M. Trost, H. Ito, J. Am. Chem. Soc. 2000, 122, 12003. B. M. Trost, E. R. Silcoff, H. Ito, Org. Lett. 2001, 3, 2497. M. Nakagawa, H. Nakao, K.-I. Watanabe, Chem. Lett. 1985, 391. Y. Yamada, K. I. Watanabe, H. Yasuda, Utsonomiya Daigaku Kyoikugakubu Kiyo, Dai-2-bu 1989, 39, 25. Some of these results could not be reproduced, see: M. A. Calter, R. K. Orr, Tetrahedron Lett. 2003, 44, 5699. Z. G. Hajos, D. R. Parrish, German Patent DE 2102623, 1971. U. Eder, R. Wiechert, G. Sauer, German Patent DE 2014757, 1971. U. Eder, G. Sauer, R. Wiechert, Angew. Chem., Int. Ed. Engl. 1971, 10, 496. Z. G. Hajos, D. R. Parrish, J. Org. Chem. 1974, 39, 1615. N. Cohen, Acc. Chem. Res. 1976, 9, 512–41. K. Drauz, A. Kleemann, J. Martens, Angew. Chem., Int. Ed. Engl. 1982, 21, 584–608. J. Martens, Chem. Ztg 1986, 110, 169. M. E. Jung, Tetrahedron 1976, 32, 3. E. R. Jarvo, S. J. Miller, Tetrahedron 2002, 58, 2481–2495. N. Harada, T. Sugioka, H. Uda, T. Kuriki, Synthesis 1990, 53. ¨ rst, Synthesis 1977, J. Gutzwiller, P. Buchschacher, A. Fu 167. B. List, R. A. Lerner, C. F. Barbas, III, J. Am. Chem. Soc. 2000, 122, 2395. W. Notz, B. List, J. Am. Chem. Soc. 2000, 122, 7386.
References 31 32 33 34 35 36 37 38 39 40
B. List, P. Pojarliev, C. Castello, Org. Lett. 2001, 3, 573. B. List, Tetrahedron 2002, 58, 5572. B. List, Synlett 2001, 1675. S. Hosokawa, K. Sekiguchi, M. Enemoto, S. Kobayashi, Tetrahedron Lett. 2000, 41, 6429. V. Pistara, P. L. Barili, G. Catelani, A. Corsaro, F. D’Andrea, S. Fisichella, Tetrahedron Lett. 2000, 41, 3253. T. Ooi, M. Taniguchi, M. Kameda, K. Maruoka, Angew. Chem. Int. Ed. 2002, 41, 4542. G. Storck, A. Brizzolara, H. Landesman, J. Szmuszkovicz, R. Terrell, J. Am. Chem. Soc. 1963, 85, 207. T. Mukaiyama, K. Banno, K. Narasaka, J. Am. Chem. Soc. 1974, 96, 7503. O. Takazawa, K. Kogami, K. Hayashi, Bull. Chem. Soc. Jpn. 1985, 58, 2427–2428. See for example: L. Birkhofer, S. M. Kim, H. D. Engels, Chem.
Ber. 1962, 95, 1495. 41 F.G. Fischer, A. Marschall, Ber. 1931, 64, 2825. 42 W. Langenbeck, G. Borth, Ber. 1942, 75, 951. 43 F. H. Westheimer, H. Cohen, J. Am. Chem. Soc. 1938, 60,
90. 44 R. P. Koob, J. G. Miller, A. R. Day, J. Am. Chem. Soc. 1951,
73, 5775. 45 J. C. J. Speck, A. A. Forist, J. Am. Chem. Soc. 1957, 79, 4659. 46 J. Hine, W. H. Sachs, J. Org. Chem. 1974, 39, 1937. 47 R. M. Pollack, S. Ritterstein, J. Am. Chem. Soc. 1972, 94,
5064. 48 J.-L. Reymond, Y. Chen, J. Org. Chem. 1995, 60, 6970. 49 S. Bahmanyar, K. N. Houk, J. Am. Chem. Soc. 2001, 123,
11273. 50 Also see: A. Sevin, J. Maddaluno, C. Agami, J. Org. Chem.
1987, 52, 5611. 51 W. Treibs, K. Krumbholz, Chem. Ber. 1952, 85, 1116. 52 J. Schreiber, C.-G. Wermuth, Bull. Soc. Chim. Fr. 1965, 8,
2242. 53 F. Merger, J. Frank, Eur. Pat. Appl. 0 421 271 A2, 1991. 54 A. Kuiterman, H. Dielemanns, R. Green, A. M. C. F.
Castelijns, US patent 5,728,892, 1998. 55 T. Ishikwa, E. Uedo, S. Okada, S. Saito, Synlett 1999, 4, 450. 56 For an excellent review, see: Tietze, L. F., In: Comprehensive
57 58 59 60 61 62 63
Organic Synthesis, Vol. 2; Trost, B. M., Ed.; Pergamon Press: New York, 1991, 341–394. H. G. Lindwall, J. S. Maclennan, J. Am. Chem. Soc. 1932, 54, 4739. G. Kobayashi, S. Furukawa, Chem. Pharm. Bull. 1964, 12, 1129. R. B. Van Order, H. G. Lindwall, J. Org. Chem. 1945, 10, 128. R. C. Blume, H. G. Lindwall, J. Org. Chem. 1946, 22, 185. A. L. Wilds, C. Djerassi, J. Am. Chem. Soc. 1946, 68, 1715. H. Schlenk, Chem. Ber. 1948, 81, 175. E. C. Constable, P. Harverson, D. R. Smith, L. A. Whall, Tetrahedron 1994, 26, 7799.
197
198
4 Amine-catalyzed Aldol Reactions 64 E. Buchta, G. Satzinger, Chem. Ber. 1959, 92, 449. 65 D. Mead, R. Loh, A. E. Asato, R. S. H. Liu, Tetrahedron Lett.
1985, 26, 2873. 66 A. H. Lewin, M. R. Nilsson, J. P. Burgess, F. I. Carroll,
Org. Prep. Proced. Int. 1995, 27, 621. ¨ . Sezer, O. Anac, Rev. Roum. Chim. 1997, 42, 67 A. Daut, O 1045. 68 H. Bayer, C. Batzl, R. W. Hartmann, A. Mannschreck, J.
Med. Chem. 1991, 34, 2685. 69 Woodward, R. B., Sondheimer, F., Taub, D., Heusler, K.,
MacLamore, W. M. J. Am. Chem. Soc. 1952, 74, 4223. 70 E. J. Corey, R. L. Danheiser, J. Am. Chem. Soc. 1978, 100,
8031. 71 B. B. Snider, K. Yang, J. Org. Chem. 1990, 55, 4392. 72 X.-X. Shi, Q.-Q. Wu, X. Lu, Tetrahedron: Asymmetry 2002, 13, 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97
461. A. Srikrishna, N. C. Babu, Tetrahedron Lett. 2001, 42, 4913. B. Traber, H. Pfander, Tetrahedron Lett. 2000, 41, 7197. W. R. Roush, D. A. Barda, Tetrahedron Lett. 1997, 38, 8785. R. Lalande, J. Moulines, J. Duboudin, C. R. Bull. Soc. Chim. Fr. 1962, 1087. C.-Q. Wei, X.-R. Jiang, Y. Ding, Tetrahedron 1998, 54, 12623. H. Hagiwara, H. Ono, N. Komatsubara, T. Hoshi, T. Suzuki, M. Ando, Tetrahedron Lett. 1999, 40, 6627. M. Allard, J. Levisalles, H. Rudler, Bull. Soc. Chim. Fr. 1968, 303. Y. Ding, X.-R. Jiang, J. Chem. Soc., Chem. Commun. 1995, 16, 1693. A. Takahashi, M. Shibasaki, Tetrahedron Lett. 1987, 28, 1893. J. Wright, G. J. Drtina, R. A. Roberts, L. A. Paquette, J. Am. Chem. Soc. 1988, 110, 5806. P. Wieland, K. Miescher, Helv. Chim. Acta 1950, 33, 2215. N. P. Buu-Hoi, N. Hoan, D. Lavit, J. Chem. Soc. 1950, 230. A. Wettstein, K. Heusler, H. Ueberwasser, P. Wieland, Helv. Chim. Acta 1957, 40, 323. E. Plieninger, G. Ege, R. Fischer, W. Hoffmann, Chem. Ber. 1961, 94, 2106. A. L. Begbie, B. T. Golding, J. Chem. Soc. Perkin I 1972, 602. W. Kreiser, P. Below, Tetrahedron Lett. 1981, 22, 429. E. J. Corey, M. A. Tius, J. Das, J. Am. Chem. Soc. 1980, 102, 7612. B. Roy, H. Watanabe, T. Kitahara, Heterocycles 2001, 55, 861. S. Swaminathan, M. S. Newman, Tetrahedron 1958, 2, 88. S. Ramachandran, M. S. Newman, Org. Synth. 1961, 41, 38. R. Selvarajan, J. P. John, K. V. Narayanan, S. Swaminathan, Tetrahedron 1966, 22, 949. T. A. Spencer, H. S. Neel, T. W. Flechtner, R. A. Zayle, Tetrahedron Lett. 1965, 43, 3889. T. A. Spencer, K. K. Schmiegel, Chem. Ind. 1963, 1765. R. D. Roberts, H. E. Ferran, Jr., M. J. Gula, T. A. Spencer, J. Am. Chem. Soc. 1980, 102, 7054. T. A. Spencer, Bioorganic Chemistry, Vol. 1, Academic Press, New York San Francisco London, 1977.
References 98 S. Takano, C. Kasahara, K. Ogasawara, J. Chem. Soc. Chem.
Comm. 1981, 635. 99 J. C. Blazejewski, J. Fluorine Chemistry 1990, 46, 515. 100 S. Terashima, S. Sato, K. Koga, Tetrahedron Lett. 1979, 36,
3469. 101 A. Prze´zdziecka, W. Stepanenko, J. Wicha, Tetrahedron:
Asymmetry 1999, 10, 1589. 102 S. Kwiatkowski, A. Syed, C. P. Brock, D. S. Watt, Synthesis
1989, 818. 103 D. Rajagopal, R. Narayanan, S. Swaminathan, Tetrahedron
Lett. 2001, 42, 4887. 104 N. Ramamurthi, S. Swaminathan, Indian J. Chem. Sect. B
1990, 29, 401. 105 S. Danishefsky, P. Cain, J. Am. Chem. Soc. 1976, 98, 4975. 106 C. Agami, F. Meynier, C. Puchot, Tetrahedron 1984, 40,
1031. 107 C. Agami, N. Platzer, H. Sevestre, Bull. Soc. Chim. Fr. 1987,
2, 358. 108 C. Agami, H. Sevestre, J. Chem. Soc., Chem. Commun. 1984,
21, 1385. 109 C. Agami, J. Levisalles, H. Sevestre, J. Chem. Soc., Chem.
Commun. 1984, 418. 110 C. Agami, C. Puchot, H. Sevestre, Tetrahedron Lett. 1986, 27,
1501. 111 C. Agami, C. Puchot, J. Mol. Cat. 1986, 38, 341. 112 C. Agami, C. Puchot, Tetrahedron 1986, 42, 2037. 113 C. Agami, J. Levisalles, C. Puchot, J. Chem. Soc., Chem.
Commun. 1985, 441. 114 C. Agami, Bull. Soc. Chim. FR. 1988, 3, 499. 115 D. Rajagopal, M. S. Moni, S. Subramanian, S.
Swaminathan, Tetrahedron: Asymmetry 1999, 10, 1631. 116 S. Bahmanyar, K. N. Houk, J. Am. Chem. Soc. 2001, 123,
12911. 117 K. L. Brown, L. Damm, J. D. Dunitz, A. Eschenmoser, R.
Hobi, C. Kratky, Helv. Chim. Acta 1978, 61, 3108. 118 L. Hoang, S. Bahmanyar, K. N. Houk, B. List, J. Am. Chem.
Soc. 2003, 125, 16. 119 C. Puchot, O. Samuel, E. Dunach, S. Zhao, C. Agami,
H. B. Kagan, J. Am. Chem. Soc. 1980, 108, 2353. 120 C. Pidathala, L. Hoang, N. Vignola, B. List, Angew. Chem.
Int. Ed. Engl. 2003, 115, 2891. 121 Also see: R. B. Woodward, E. Logusch, K. P. Nambiar, K.
Sakan, D. E. Ward, et al., J. Am. Chem. Soc. 1981, 103, 3210. 122 C. Agami, N. Platzer, C. Puchot, H. Sevestre, Tetrahedron
1987, 43, 1091. 123 B. List, P. Pojarliev, C. Castello, Org. Lett. 2001, 3, 573. 124 I. Izquierdo, M. T. Plaza, R. Robles, A. J. Mota, F. Franco,
Tetrahedron: Asymmetry 2001, 12, 2749. 125 S. Bahmanyar, K. N. Houk, H. J. Martin, B. List, J. Am.
Chem. Soc. 2003, 125, 2475. 126 K. N. Rankin, J. W. Gauld, R. J. Boyd, J. Phys. Chem. A 2002. ´ , L. R. Domingo, Theor. Chem. Acc. 2002, 381. 127 M. Arno
199
200
4 Amine-catalyzed Aldol Reactions 128 L. Peng, H. Liu, T. Zhang, F. Zhang, T. Mei, Y. Li,
Tetrahedron Lett. 2003, 44, 5107. 129 K. Sakthivel, W. Notz, T. Bui, C. F. Barbas, J. Am. Chem.
Soc. 2001, 123, 5260. 130 S. Saito, M. Nakadai, H. Yamamoto, Synlett 2001, 8, 1245. 131 M. Nakadai, S. Saito, H. Yamamoto, Tetrahedron 2002, 58,
8167. 132 Z. Tang, F. Jiang, L.-T. Yu, Y. Cui, L.-Z. Gong, A.-Q. Mi,
Y.-Z. Jiang, Y.-D. Wu, J. Am. Chem. Soc. 2003, 125, 5262. 133 Suggested by Professor K. N. Houk, UCLA. 134 J. Kofoed, J. Nielsen, J.-L. Reymond, Biorg. Med. Chem. Lett.
2003, on-line article. 135 H. J. Martin, B. List, Synlett, 2003, 1901. 136 T. P. Loh, L.-C. Feng, H. Y. Yang, J.-Y. Yang, Tetrahedron
Lett. 2002, 43, 8741. 137 P. Kotrusz, I. Kmentova´, B. Gotov, S. Toma, E. Solca´niova´,
Chem. Comm. 2002, 2510. 138 T. Kitazume, Z. Jiang, K. Kasai, Y. Mihara, M. Suzuki, J.
Fluorine Chem. 2003, 121, 205. ´ rdova, W. Notz, C. F. Barbas, Chem. Commun. 2002, 139 A. Co 3024. 140 Y.-Y. Peng, Q.-P. Ding, Z. Li, P. G. Wang, J. P. Cheng,
Tetrahedron Lett. 2003, 44, 3871. 141 K. Kondo, T. Yamano, K. Takemoto, Macromol. Chem. 1985,
186, 1781. 142 M. Benaglia, G. Celentano, F. Cozzi, Adv. Synth. Catal.
2001, 343, 171. 143 M. Benaglia, M. Cinquini, F. Cozzi, A. Puglisi, Adv. Synth.
Catal. 2002, 344, 533. 144 Proline-mediated aldehyde self-aldolizations have been
145 146 147 148
mentioned by: F. Orsini, F. Pelizzoni, M. Forte, J. Heterocycl. Chem. 1989, 26, 837. A. Co´rdova, W. Notz, C. F. Barbas, J. Org. Chem. 2002, 67, 301. Also see: N. S. Chowdari, D. B. Ramachary, A. Co´rdova, C. F. Barbas, Tetrahedron Lett. 2002, 43, 9591. A. Bogevig, N. Kumaragurubaran, K. A. Jorgensen, Chem. Commun. 2002, 620. A. B. Northrup, D. W. C. MacMillan, J. Am. Chem. Soc. 2002, 124, 6798.
201
5
Enzyme-catalyzed Aldol Additions Wolf-Dieter Fessner 5.1
Introduction
As a supplement to classical chemical methodology, enzymes are finding increasing acceptance as chiral catalysts for the in-vitro synthesis of asymmetric compounds because they have been optimized by evolution for high selectivity and catalytic efficiency [1–11]. In particular, the high stereospecificity of aldolases in CaC bond-forming reactions gives them substantial utility as synthetic biocatalysts, making them an environmentally benign alternative to chiral transition metal catalysis of the asymmetric aldol reaction [12]. In contrast with most classical chemical operations, biocatalytic conversions can usually be performed under mild reaction conditions that are compatible with underivatized substrates, thus also obviating tedious and costly protecting group manipulation [13]. Several dozen aldolases have been identified in Nature [14, 15] and many of these are commercially available on a scale sufficient for preparative applications. Recent advances in molecular and structural biology have improved access to virtually any biocatalyst in large quantity and to its detailed functional topology which increasingly enables exploitation of its synthetic utility on rational grounds. Evidently, enzyme catalysis is thus most attractive for the synthesis and modification of biologically relevant classes of organic compounds that are typically complex, multifunctional, and water soluble. Typical examples are those structurally related to amino acids [16, 17] or carbohydrates [18–24], which are difficult to prepare and handle by conventional methods of chemical synthesis. Because of the multitude of factors that might be critical to the success of an enzymatic conversion, and because of the empirical nature of their development, it is mandatory in the design of new biocatalytic processes to become familiar with the scope and limitations of synthetically useful enzymes, both as a source of inspiration and for reference. Thus, this overview attempts to outline the current status of development for the most important aldolase biocatalysts and their preparative potential for asymmetModern Aldol Reactions. Vol. 1: Enolates, Organocatalysis, Biocatalysis and Natural Product Synthesis. Edited by Rainer Mahrwald Copyright 8 2004 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim ISBN: 3-527-30714-1
5 Enzyme-catalyzed Aldol Additions
202
O O
H
R
-
R'
X
OH
O
R
OH R'
R
X
OH
O R'
R
O
OH R'
R
X
X
O R'
X
Fig. 5.1
Generation of stereo-diversity by aldol addition.
OPO3=
O H
CO2H HH
H
CO2H H
pyruvate
phosphoenolpyruvate
O
O OPO3=
HO HH
dihydroxyacetone phosphate
H
O H
HH acetaldehyde
H2N
OH HH glycine
Fig. 5.2
Nucleophiles for preparatively useful aldolases.
ric synthesis. Catalytic CaC coupling is among the most useful synthetic methods in asymmetric synthesis because of its potential for stereoisomer generation by a convergent, ‘‘combinatorial’’ strategy [25]. Thus, attention is also paid to the feasibility of directed stereodivergent approaches by which multiple, diastereomeric products can be derived from common synthetic building blocks (Figure 5.1) [25, 26]. Obviously, such a synthetic strategy requires the prevalence of related, stereocomplementary enzymes which must have a similarly broad substrate tolerance.
5.2
General Aspects 5.2.1
Classification of Lyases
Most enzymes used by Nature for carbon–carbon bond formation and cleavage (‘‘lyases’’) catalyze a crossed aldol reaction in the form of a reversible, stereocontrolled addition of a nucleophilic ketone donor to an electrophilic aldehyde acceptor. Synthetically the most useful and most extensively studied enzymes use aldol donors comprising 2-carbon or 3carbon fragments and can be grouped into four categories depending on the structure of their nucleophilic component (Figure 5.2): (i) pyruvate-
5.2 General Aspects
O B:
O X
R H
B—H
X
R
H
H R'–CHO
O
O B
H
O
R
X H
H R
B—H
R
O
X H
H
R
Fig. 5.3
Retention mechanism for deprotonation and CaC bond formation in enzymatic aldolization.
(and phosphoenolpyruvate-) dependent aldolases, (ii) dihydroxyacetone phosphate-dependent aldolases, (iii) an acetaldehyde-dependent aldolase, and (iv) glycine-dependent enzymes. Apart from possible mechanistic differences, members of the first and third types generate a-methylene carbonyl compounds and thereby generate a single stereocenter, whereas members of the other types form a-substituted carbonyl derivatives that contain two new vicinal chiral centers at the new CaC bond, which makes them particularly appealing for asymmetric synthesis. Typically, lyases require highly specific nucleophilic donor components, because of mechanistic requirements. This includes the need for reasonably high substrate affinity and the general difficulty of binding and anchoring a rather small molecule in a fashion that restricts solvent access to the carbanionic site after deprotonation and shields one enantiotopical face of the nucleophile to secure correct diastereofacial discrimination (Figure 5.3) [27]. Usually, approach of the aldol acceptor to the enzyme-bound nucleophile occurs stereospecifically following an overall retention mechanism, whereas facial differentiation of the aldehyde carbonyl is responsible for the relative stereoselectivity. In this manner the stereochemistry of the CaC bond formation is completely controlled by the enzymes, in general irrespective of the constitution or configuration of the substrate, which renders the enzymes highly predictable. Few specific exceptions to this rule are currently known (vide infra). Most lyases tolerate reasonably broad variation of the electrophilic acceptor component, usually an aldehyde, on the other hand. This feature, which nicely complements the emerging needs of combinatorial synthesis,
203
204
5 Enzyme-catalyzed Aldol Additions 3-O
CHO HO
6 P 2O
NH2
OPO3=
N S
N pyridoxal phosphate
N N
thiamine diphosphate
N
H N
HO
N H
H2N N
tetrahydrofolate
HN R
Fig. 5.4
Types of cofactors for aldol and related reactions.
makes possible a stereodivergent strategy for synthesis of arrays of stereoisomeric compounds by employing stereo-complementary enzymatic catalysts to selectively produce individual diastereomers by design from a given starting material. Biochemical nomenclature of enzymes [28] usually follows historical classifications that are different from the needs of synthetic organic chemists today. Whereas the common EC numbers are valuable for reference, in this overview an enzyme designation will be used that utilizes a three-letter code as reference to the natural substrate (from which usually stereochemistry is immediately obvious), followed by a single capital letter that indicates the conversion type (e.g., aldolases (A), synthases (S), isomerases (I), dehydrogenases (D), oxidases (O), kinases (K), (glycosyl)transferases (T), epimerases (E) etc.) [25]. In addition to the preparatively useful aldolases, several mechanistically distinct enzymes can be employed for synthesis of product structures identical with those accessible from aldolase catalysis. Such alternative enzymes (e.g. transketolase), which are actually categorized as transferases but also catalyze aldol-related additions with the aid of cofactors (Figure 5.4) such as pyridoxal 5-phosphate (PLP), thiamine pyrophosphate (TPP), or tetrahydrofolate (THF), are emerging as useful catalysts in organic synthesis. Because these operations often extend and/or complement the synthetic strategies open to aldolases, a selection of such enzymes and examples of their synthetic utility are included also in this overview. 5.2.2
Enzyme Structure and Mechanism
Mechanistically, enzymatic activation of the aldol donor substrates is achieved by stereospecific deprotonation along two different pathways (Figures 5.5 and 5.6) [29]. Class I aldolases bind their substrates covalently via imine-enamine formation with an active site lysine residue to initiate bond cleavage or formation (Figure 5.5); this can be demonstrated by reductive interception of the intermediate with borohydride which causes irreversible inactivation of the enzyme as a result of alkylation of the amine [30, 31].
5.2 General Aspects
205
enzyme NH2
enzyme H
O
+
H 2O
NH
X
R
X
R H+
enzyme H+
X
R
A
H 2O
NH
H+
B
R'CHO
R'CHO
enzyme NH2 O X
R R'
enzyme
enzyme
OH
NH
H+
H 2O
X
R H+
R'
H 2O
OH
H+
C
Schematic mechanism for class I aldolases.
OPO3=
CO2 H
OPO3=
enzyme CO2H
O Zn His HO His His
O HO
D OPO3=
enzyme R
O CO2H
O HO H
X
R
Fig. 5.5
enzyme
NH
H+
Zn His His His
enzyme—O Fig. 5.6
Schematic mechanism for DHAP-dependent class II aldolases.
Zn His His His
R'
O
206
5 Enzyme-catalyzed Aldol Additions
In contrast, class II aldolases utilize transition metal ions as a Lewis acid cofactor, which facilitates deprotonation by bidentate coordination of the donor to give the enediolate nucleophile (Figure 5.6) [32]. This effect is usually achieved by means of a tightly bound Zn 2þ ion but a few other divalent cations can act instead. Evidently, aldolases of the latter class can be effectively inactivated by addition of strong complexing agents such as EDTA [29]. Mechanistic pathways for both classes of aldolases have been substantiated by several recent crystal structures of liganded enzymes that altogether provide a detailed insight into the catalytic cycles and the individual function of active site residues in the stereochemically determining events. For class I type enzymes, the (ba)8 -barrel structure of the class I fructose 1,6-bisphosphate aldolase (FruA, vide infra) from rabbit muscle was the first to be uncovered by X-ray crystal-structure analysis [33]; this was followed by those from several other species [34–37]. A complex of the aldolase with non-covalently bound substrate DHAP (dihydroxyacetone phosphate) in the active site indicates a trajectory for the substrate traveling towards the nucleophilic Lys229 N e [38, 39]. There, the proximity of side-chains Lys146 and Glu187 is consistent with their participation as proton donors and acceptors in Schiff base formation (A, B); this was further supported by sitedirected mutagenesis studies [40]. Complementary information was gained from structural investigations of the E. coli transaldolase (EC 2.2.1.2) at 1.87 A˚ resolution [41], including those on its covalent complex with dihydroxyacetone, which had been trapped at the active site Lys N e by Schiff base reduction [42]. The three-dimensional structure of the neuraminic acid aldolase (NeuA, vide infra) from Escherichia coli has also been determined [43] after interception of the pyruvate Schiff base at Lys165 N e by borohydride reduction [44]. Further insight came from high-resolution structures (up to 1.6 A˚) of the hemophilus influenzae enzyme in a complex with three substrate analogs [45]. Formation of a carbinolamine as the short-lived Schiff base precursor (C) could be trapped by flash freezing of 2-keto-3-deoxy-6-phosphogluconate aldolase in the presence of its natural donor substrate pyruvate [46]. Stereospecificity of the reaction seems to be ensured mostly by hydrophobic contact of the pyruvate methyl group in the active site. For class II aldolases, X-ray structures of the zinc-dependent fuculose 1-phosphate aldolase (FucA, vide infra) [47, 48] and the rhamnulose 1phosphate aldolase (RhuA, vide infra) [49] from E. coli have recently been solved and confirm close similarity in their overall fold. Both enzymes are homotetramers in which subunits are arranged in C4 -symmetry. The active site is assembled in deep clefts at the interface between adjacent subunits and the catalytic zinc ion is tightly coordinated by three His residues. Phosphoglycolohydroxamate (PGH), a structural analog with the DHAP enediolate (D) that can be regarded as a mimic of an advanced intermediate or transition state, has been shown it to be a potent inhibitor of all currently accessible class II DHAP aldolases with K i in the nm range [32].
5.2 General Aspects
Its metal chelating binding mode has been determined by liganded structures of native protein and active-site mutants. In concert, these studies have enabled derivation of a conclusive blueprint for the catalytic cycle of metal-dependent aldolases that successfully rationalizes all key stereochemical issues [50]. Structural details are also available for the class II (ba)8 -barrel enzyme FruA from E. coli at excellent resolution (1.6 A˚) [51, 52]. The homodimeric protein requires movement of the divalent zinc cofactor from a buried position to the catalytically effective surface position. Recent attempts to explore the origin of substrate discrimination of the structurally related E. coli aldolase with specificity for tagatose 1,6-bisphosphate by site-directed mutagenesis and structure determinations highlight the complexity of enzyme catalysis in this class of enzymes and the subtleties in substrate control [53–55]. 5.2.3
Practical Considerations
Although most of the aldolases attractive for synthetic applications arise from catabolic pathways in which they function in the degradative cleavage of metabolites, the reverse CaC bond-forming processes are often favored by thermodynamic relationships [56]. Because of the bimolecular nature of the reaction, the fraction of product at equilibrium might be increased in less favorable cases by working at higher substrate concentrations or by driving the reaction with a higher concentration of one of the reactants. Individual choice will certainly depend primarily on the cost of starting materials and ease of separation from the product when used in large excess; critical factors such as enzyme inhibition by the substrate(s) or product must also be considered. The latter factor will be more obvious if one recognizes that for most of the lyases both the donor and acceptor components contain strong electrophilic sites such as aldehyde or ketone carbonyl groups, and that many lyases, including class I aldolases, involve covalent binding of substrate and product at – but not necessarily restricted to – the active site. Most useful lyase families use substrates functionalized by anionically charged groups such as those present in pyruvate or dihydroxyacetone phosphate, which remain unaltered during catalysis. The charged group thereby introduced into products (phosphate, carboxylate) not only constitutes a handle for binding of the substrates by the enzymes but can also facilitate preparative isolation from an aqueous solution of the products and their purification by salt precipitation or ion-exchange techniques. One problem arising as a result of the affinity of the enzymes for anionic substrates is potential (competitive) inhibition by common buffer salts, e.g. inorganic phosphate. For routine practical application most aldolases are sufficiently robust to enable their use in solution for an extended period of time, often several days. To enhance lifetime and to facilitate recovery of the biocatalysts after
207
208
5 Enzyme-catalyzed Aldol Additions
completion of the desired conversion, several options have been tested to immobilize the enzymes to or within insoluble matrices [57, 58], including cross-linking of enzyme crystals [59] or confining them in membrane reactors [60–62]. To facilitate conversion of less polar substrates, reaction media containing up to 30% organic cosolvent and even highly concentrated waterin-oil emulsions have been tested successfully [63]. Applications of other current techniques are indicated with the individual enzymes, if available. Carbon–carbon bond construction is a pivotal process in asymmetric synthesis of complex molecular targets. Using enzyme catalysis, molecular complexity can be rapidly built up under mild conditions, without a need for protection of sensitive or reactive functional groups and with high chemical efficiency and usually uncompromised stereochemical fidelity [12, 14]. Within a synthetic strategy for an intricate target structure, subsequent chemoselective or regioselective differentiation of functional groups might pose a considerable difficulty that can easily outbalance the economical nature of the biocatalytic transformation. This strongly suggests consideration of schemes suitable for introduction and handling of protective groups enzymatically [13]. For this purpose, a broad array of enzymes is available, particularly such with ester and amide-forming or cleaving behavior, and the feasibility of selective operation has been well investigated [1–11]. Such technology has not yet been adopted in routine applications at its full potential, but certainly would foster a more practical interface between biocatalytic and chemical synthesis.
5.3
Pyruvate Aldolases
In vivo, pyruvate-dependent lyases mostly serve a catabolic function in the degradation of sialic acids and KDO (2-keto-3-deoxy-manno-octosonate) and in that of 2-keto-3-deoxy aldonic acid intermediates from hexose or pentose catabolism. Because these freely reversible aldol additions often have less favorable equilibrium constants [29], synthetic reactions are usually driven by excess pyruvate to achieve a satisfactory conversion. A few related enzymes have been identified that use phosphoenolpyruvate in place of pyruvate which, by release of inorganic phosphate upon CaC bond formation, renders aldol additions essentially irreversible [14, 25]. Although attractive for synthetic applications, such enzymes have not yet been intensively studied for preparative applications [64]. 5.3.1
N-Acetylneuraminic Acid Aldolase
N-Acetylneuraminic acid aldolase (or sialic acid aldolase, NeuA; EC 4.1.3.3) catalyzes the reversible addition of pyruvate (2) to N-acetyl-d-mannosamine
5.3 Pyruvate Aldolases
HO HO
OH NHAc O
OH
OH
HO
+
O CO2H
S
CO2H
OH
1
OH
NeuA
O
209
OH
NHAc
2
HO
OH
AcHN HO OH
OH O
3
Fig. 5.7
Natural substrates of N-acetylneuraminic acid aldolase.
(ManNAc; 1) in the degradation pathway of the parent sialic acid (3) (Figure 5.7). The NeuA lyases found in both bacteria and animals are type-I enzymes that form a Schiff base–enamine intermediate with pyruvate and promote si-face attack on the aldehyde carbonyl group with formation of a (4S) configured stereocenter. Enzyme preparations from Clostridium perfringens and Escherichia coli are commercially available, and the latter has been cloned for overexpression in E. coli [65, 66] or temperature-tolerant Serratia liquefaciens [67]. The enzyme has a broad pH optimum at approximately 7.5 and useful stability in solution at ambient temperature [68]. It has been used for synthetic applications in homogenous solution, in an immobilized form [68–72] or enclosed in a dialysis membrane [73, 74]. Because neuraminic acid is an important precursor to Zanamivir, an inhibitor of viral sialidases that is marketed for treatment of influenza infections, the large-scale synthesis of 3 has been developed as a prime example of an industrial aldolase bioconversion process at the multi-ton scale [75–77]. In this equilibrium-controlled bioconversion (equilibrium constant 12.7 m1 in favor of the retro-aldolization), the expensive 1 can be produced by integrated enzymatic in situ isomerization of inexpensive N-acetylglucosamine 4 by a combination of NeuA with an N-acylglucosamine 2epimerase (EC 5.1.3.8) catalyst in an enzyme membrane reactor [61, 78] (Figure 5.8). To facilitate product recovery, excessive 2 can be removed by formation of a separable bisulfite adduct, or by decomposition with yeast pyruvate decarboxylase into volatile compounds [75, 79]. The need for excess 2 might be circumvented altogether by coupling of the synthesis of 3 to a thermodynamically more favored process, e.g. combination with an irreversible sialyltransferase reaction to furnish sialyloligosaccharides [80, 81]. Extensive studies have indicated that only pyruvate is acceptable as the NeuA donor substrate, with the exception of fluoropyruvate [82], but that the enzyme has fairly broad tolerance of stereochemically related aldehyde
CO2H
210
5 Enzyme-catalyzed Aldol Additions
OH
HO O
HO HO
4
OH NHAc
CO2H
O
HO OH AcHN
NH2
HN Zanamivir
NH
epimerase
steps HO HO HO
OH
1
HO
2, NeuA
NHAc O
OH
RCOHN HO OH
OH O
CO2H
3
Fig. 5.8
Industrial process for the production of N-acetylneuraminic acid as a precursor to an influenza inhibitor.
substrates as acceptor alternatives, for example several sugars and their derivatives larger than or equal in size to pentoses (Table 5.1) [62, 68, 83]. Permissible variations include replacement of the natural d-manno configured substrate with derivatives containing modifications such as epimerization, substitution, or deletion at positions C-2, C-4, or C-6 [20, 25]. Epimerization at C-2, however, is restricted to small polar substituents at strongly reduced reaction rates [84, 85]. As an example of continuous process design, KDN (6) has been produced on a 100-g scale from d-mannose and pyruvate using a pilot-scale enzyme membrane reactor (EMR) with a space–time yield of 375 g L1 d1 and an overall crystallized yield of 75% (Figure 5.9) [86]. Similarly, l-KDO (5) can be synthesized from l-arabinose [62]. The broad substrate tolerance of the catalyst for sugar precursors has recently been exploited in the equilibrium generation of sialic acid and analogs for in-situ screening of a dynamic combinatorial library [87]. Because of the importance of sialic acids in a wide range of biological recognition events, the aldolase has become popular for chemoenzymatic synthesis of a multitude of other natural and non-natural derivatives or analogs of 3 (Figure 5.10). Many examples have been reported for sialic acid modifications at C-5/C-9 [20, 25], for example differently N-acylated derivatives 8 [88–90], including amino acid conjugates [91], or 9-modified analogs 9 [92–94], in search for new neuraminidase (influenza) inhibitors. Most notably, the N-acetyl group in 1 can be either omitted [84, 85] or replaced by sterically demanding substituents such as N-Cbz (10) [95, 96] or even a non-polar phenyl group [84] without destroying activity. Large acyl substituents are also tolerated at C-6, as shown by the conversion of a Bocglycyl derivative 11 as a precursor to a fluorescent sialic acid conjugate [97].
5.3 Pyruvate Aldolases Tab. 5.1
Substrate tolerance of neuraminic acid aldolase. OH R4 5 R R1 O R3 HO R2
NeuA OH
OH
R5 4
R
O
R1
pyruvate
CO2H
R3 OH R2
R1
R2
R3
R4
R5
Yield [%]
Rel. Rate [%]
Ref.
NHAc NHAc NHAc NHAc NHAc NHAc NHAc NHAc NHAc NHAc NHC(O)CH2 OH NHCbz OH OH OH OH H H Ph
H H H H H H H H H H H H H H H H F H H
OH OH OH OH OH OH OH OH OMe H OH OH OH H H OH OH OH OH
H H H H H H H H H H H H H H F H H H H
CH2 OH CH2 OAc CH2 OMe CH2 N3 CH2 OP(O)Me 2 CH2 O(l-lactoyl) CH2 O(Gly-N-Boc) CH2 F CH2 OH CH2 OH CH2 OH CH2 OH CH2 OH CH2 OH CH2 F H CH2 OH CH2 OH CH2 OH
85 84 59 84 42 53 47 22 70 70 61 75 84 67 40 66 30 36 76
100 20 – 60 – – – 60 – – – – 91 35 – 10 – 130 –
72, 68 72, 68 72 85 85 72, 85 97 85 72 100 72 96 79, 100 100 85 100 85 85, 100 100
OH
HO NeuA
HO
O
L-arabinose
pyruvate
HO
HO NeuA D-mannose
pyruvate
OH
CO2H
5
L-KDO
OH
HO HO OH
OH O
CO2H
6 Fig. 5.9
Sialic acids prepared on large scale.
D-KDN
211
5 Enzyme-catalyzed Aldol Additions
212
X HO HO
NHCOR O OH
OH
HO
NeuA
RCOHN HO OH
pyruvate
7
O
OH
X
OH CO2H
OH
AcHN HO OH
8
O
CO2H
9
NHBoc R = OtBu, CH2OH,
X = CH2OCH3, CH2OMOM, CH2OAc, CH2OBz
CH2Ph
O O
OH
HO
H O N HO OH
O
N H
OH
O
CO2H
10
O O
OH OH
AcHN HO OH
O
CO2H
11
Fig. 5.10
Neuraminic acid derivatives accessible by NeuA catalysis.
HO HO X
HO2C
NHAc O OH
HO
OH
AcHN HO HO
12
O
CO2H
13
X = N3, NH2, NHBoc O F HO HO HO
CO2H
15
HO O OH
NeuA
14
HO
OH
HO HO HO HO
O
CO2H F
16
Fig. 5.11
Sugar derivatives not accepted by NeuA in direction of synthesis or cleavage, and use of fluoropyruvate for synthesis of fluorosialates.
No 3-azido, 3-amino, or Boc-protected mannosamine analogs 12 were accepted by the enzyme (Figure 5.11) [98] which suggests that the presence of a 3-hydroxyl group is a necessary precondition for substrates of the aldolase. Likewise, conformationally inflexible acrylate 13 was not accepted in cleavage direction. By use of fluoropyruvate 15 as the donor substrate a series of diastereomeric 3-deoxy-3-fluoro ulosonic acids such as 16 has been prepared in good yields (> 49%) from pentoses or hexoses [82]. Such products are attractive for non-invasive in-vivo pharmacokinetic studies by NMR tomography ( 19 F derivatives) or positron-emission spectroscopy ( 18 F derivatives).
5.3 Pyruvate Aldolases
213
N-acetylL-mannosD-arabinose
L-mannose
amine
NeuA pyruvate
NeuA pyruvate
HO
OH O CO2H
HO
ent-5
OH
OH
OH
D-KDO
OH
OH
HO HO HO
ent-6
O CO2H OH
L-KDN
OH
HO AcHN HO
ent-3
O CO2H
L-NeuAc
OH
Enz O H α-4C1
OH
NeuA
HO OH
HO
H
3S Enz
Enz 3R
OH
HO Enz
O H Enz
si-face
normal attack
O H
H Enz
re-face
inverted attack
Fig. 5.12
NeuA-catalyzed synthesis of sialic acids bearing the unusual inverted (4R) configuration, and three-point binding model for prediction of NeuA stereoselectivity based on conformational analysis.
In most of the examples investigated so far a high level of asymmetric induction for the (4S) configuration is retained. Several carbohydrates were, however, also found to be converted with random or even inverse stereoselectivity for the C-4 configuration [79, 83, 99]. Products generated by the unusual re-face attack with (4R) stereochemical preference include a number of related higher ulosonic acids of biological importance such as d-KDO (ent-5) [62, 79, 100, 101] or the enantiomers of naturally occurring sugars such as l-KDN (ent-6) [68, 71, 75, 86], or l-NeuNAc (ent-3) (Figure 5.12) [79]. Ready access to compounds of this type can be particularly valuable for investigation of the biological activity of sialoconjugates containing nonnatural sialic acid derivatives [102]. A critical and distinctive factor seems to be recognition by the enzyme catalyst of the configuration at C-3 in the aldehydic substrate [62, 83]. The unusual outcome has been interpreted as a result of thermodynamic control or, alternatively, of an inverse conforma-
214
5 Enzyme-catalyzed Aldol Additions
OH H O N HO OH
O
CO2H
OH
pyruvate
OH
HO2C
OH O
CO2H
OH
HO
OH 12 OH
OH
OH
OH OH
O OH
OH
O
19
O
OH
HO HO OH
18
HO
OH
17
NeuA
O
N
HO
HO
OH
OH
HO
10
O
HO HO HO
HO
OH
HO
OH
O
20
amphotericin B
OH 16
CO2H
OR
Fig. 5.13
NeuA-catalyzed preparation of an intermediate for alkaloid synthesis, and of a synthetic precursor to the macrolide antibiotic amphotericin B.
tional preference of the different substrate classes [62]. From an applicationoriented perspective a three-point binding model has been proposed for the conversion of substrate analogs in the direction of synthesis (Figure 5.12) [25]. On the basis of the (3S)-a- 4 C1 structure of the natural substrate and conformational analysis of its analogs, this model can predict the occasionnally observed compromise in, or even total inversion of, the facial stereoselectivity of CaC bond formation. Starting from the N-Cbz-protected aldolase product 10, azasugar 17 has been obtained stereoselectively by internal reductive amination as an analog of the bicyclic, indolizidine-type glycosidase inhibitor castanospermine (Figure 5.13) [96]. It has also been recognized that the C-12 to C-20 sequence of the macrolide antibiotic amphotericin B resembles the b-pyranose tautomer of 19. Thus, the branched-chain manno-configured substrate 18 was successfully chain-extended under the action of NeuA catalysis to yield the potential amphotericin B synthon 19 in good yield [103, 104]. A one-pot 13 C-labeling strategy has been developed for sialic acids by exploiting the reversible nature of the aldolase reaction (Figure 5.14) [105].
5.3 Pyruvate Aldolases
OH
HO
OH O
AcHN HO HO
NeuA
CO2H
3
OH
HO HO HO
OH
AcHN HO HO
1 O
L-LDH
CO2H
OH CO2H
O
20
O CO2H
NAD+
OH
HO
1. NPP'ase 2. NeuA
NHAc O
215
stage 2
21
CO2H
NADH
EtOH ADH
acetaldehyde
stage 1
Fig. 5.14
Process for [ 13 C]-labeling of neuraminic acid (and analogs) by controlled reversible aldolizations ( denotes [ 13 C]-label).
Nu*
O HO HO HO
OH
cell O
HN
NH
O OH
O
[NeuA, pyruvate]
CO2H
HO O OH OH O
22 Fig. 5.15
Cellular synthesis of a modified sialic acid by exposure of human cells to N-levulinoyl d-mannosamine 22. Resulting levulinoylated cell surface glycoproteins provide an opportunity for selective, covalent attachment of a variety of nucleophiles Nu*.
The procedure consists of stepwise enzymatic degradation of chemically prepared neuraminic acid derivatives (3) to give the corresponding modified ManNAc analogs (1), which is followed by subsequent neuraminic acid reconstruction in the presence of [3- 13 C] labeled pyruvate (21). To ensure complete conversion in the desired direction the first step was promoted by cofactor-dependent reduction of pyruvate; the second, synthetic step, was uncoupled by destruction of the nucleotide cofactor before addition of labeled pyruvate. Sialic acids such as 20 with high label incorporation (> 87%) were obtained in good yields (46–76%). Acceptance of the non-natural N-levulinoyl d-mannosamine 22, containing a ketone moiety in the N-acyl group, by the cellular machinery in vivo has been used to produce cell-surface oligosaccharides modified in their neuraminic acid constituents (Figure 5.15) [106, 107]. The reactive ketone groups thus produced on the cell surface could then be used for versatile covalent cell redecoration under physiological conditions, for example by
O
cell
216
5 Enzyme-catalyzed Aldol Additions
O OH OH
O OH
HO
23
HO
HO HO
O CO2H
HO OH
F
HO
O CO2H
HO
25
OH
OH
O CO2H
R
OH
2
OH
24
HO
CO2H
OH OH
OH
KdoA
+
OH
HO OH O CO2H
HO
ent-5
OH
Fig. 5.16
Natural substrates of the 2-keto-3-deoxymanno-octosonic acid aldolase, and nonnatural sialic acids obtained by KdoA catalysis.
attaching functional nucleophiles (Nu*) such as fluorescent hydrazine markers or toxin conjugates. 5.3.2
KDO Aldolase
The functionally related 2-keto-3-deoxy-manno-octosonate (KDO) aldolase (KdoA; correctly termed 3-deoxy-d-manno-octulosonic acid aldolase, EC 4.1.2.23) is involved in the catabolism of the eight-carbon sugar d-KDO ent5, a core constituent of the capsular polysaccharides (K-antigens) and outer membrane lipopolysaccharides (LPS, endotoxin) of Gram-negative bacteria [108], and of the cell wall of algae and a variety of plants [109]. The aldolase, which reversibly degrades ent-5 to d-arabinose 23 and pyruvate (Figure 5.16), has been isolated from Aerobacter cloacae, E. coli, and an Aureobacterium barkerei strain in which the enzyme seems to be located in the cell wall or membrane fraction [110]. Partially purified KdoA preparations have been studied for synthetic applications [101, 111]; these studies have shown that, similar to NeuA, the enzyme has a broad substrate specificity for aldoses (Table 5.2) whereas pyruvate was found to be irreplaceable. As a notable distinction, KdoA was also active on smaller acceptors such as glyceraldehyde. Preparative applications, e.g. that for the synthesis of KDO (ent-5) and its homologs or analogs 24/25, suffer from a less attractive equilibrium constant of 13 m1 in direction of synthesis [56]. The stereochemical course of aldol additions generally seems to adhere to re-face attack on the aldehyde carbonyl which is complementary to that of NeuA. On the basis of the results published so far it can be concluded that a (3R) configuration is necessary (but not sufficient), and that stereochemical requirements at C-2 are less stringent
5.3 Pyruvate Aldolases Tab. 5.2
Substrate tolerance of 2-keto-3-deoxy-manno-octosonic acid aldolase [101]. OH
O
R3
H R
2
R
R1 R3
KdoA
R2 HO
pyruvate
1
O CO2H OH
Substrate
R1
R2
R3
Yield [%]
Rel. Rate [%]
d-Altrose l-Mannose d-Arabinose d-Ribose 2-Deoxy-2-fluoro-d-ribose 2-Deoxy-d-ribose 5-Azido-2,5-dideoxy-d-ribose d-Threose d-Erythrose d-Glyceraldehyde l-Glyceraldehyde
OH H OH H F H H OH H H OH
H OH H OH H H H H OH OH H
(RR)-(CHOH)2 aCH2 OH (SS)-(CHOH)2 aCH2 OH (R)-CHOHaCH2 OH (R)-CHOHaCH2 OH (R)-CHOHaCH2 OH (R)-CHOHaCH2 OH (R)-CHOHaCH2 N3 CH2 OH CH2 OH H H
– 61 67 57 19 47 – – 39 11 –
25 15 100 72 46 71 15 128 93 23 36
[101]. For simple product recovery excess pyruvate can be decomposed with pyruvate decarboxylase. 5.3.3
DAHP Synthase
In the biosynthesis of aromatic amino acids in microorganisms and plants, 3-deoxy-d-arabino-heptulosonic acid 7-phosphate synthase (DAHP synthase or AroS; EC 4.1.2.15) is a pivotal enzyme for carbon framework construction. The enzyme transfers a pyruvate moiety from phosphoenolpyruvate (PEP) to d-erythrose-4-phosphate (Ery4P) in an aldol-like reaction [112, 113]. Use of the activated donor renders formation of DAHP (26), the key metabolic intermediate, practically irreversible (Figure 5.17). The AroS enzyme has been purified from E. coli [114] and Streptomyces rimosus [115] and has been cloned from E. coli, Salmonella typhimurium, and potato [116, 117]. The structure of an E. coli isozyme has been determined in a complex with PEP at high resolution [118]. The cytosolic AroS isoenzyme prevalent in higher plants has been reported to be remarkably highly tolerant of acceptor substrates, including glyoxalate, glycolaldehyde, and most 3–5-carbon sugars or their phosphates [119]. For synthesis of 26 (Figure 5.17), an immobilized enzyme system was set up to generate the labile acceptor aldehyde in situ by ketol transfer from dfructose 6-phosphate [120]. The twofold driving force from PEP used in the integrated scheme as both a phosphoryl and aldol donor secured complete
217
218
5 Enzyme-catalyzed Aldol Additions
D-fructose 6-phosphate
D-sedoheptulose 7-phosphate
transketolase
OH
D-ribose 5-phosphate
=O
3PO
H
OPO3=
Pi
PEP
O
HO HO
AroS
O
OH
OH
D-erythrose 4-phosphate
CO2H
HO CO2H
HO
OH OH
27
HO
26, DAHP
85%
CO2H
OH OH
CO2H
28
OH
OH
OH
OH
OH
29
30
Fig. 5.17
Multi-enzymatic scheme for synthesis of 3-deoxy-arabinoheptulosonic acid 7-phosphate based on the catalysis of DAHP synthase, and products generated consecutively in vivo by advanced microbial pathway engineering.
conversion of the starting material. Generally, synthesis of 26 on a larger scale is more efficient and economical by using engineered whole cells that contain a plasmid coding for AroS [121]; thereby necessary substrates and enzymes are intrinsically provided by regular cell metabolism. Similar elaborate schemes have been designed to produce quinic acid (27) [122], shikimic acid (28) [123], cyclohexadiene trans-diols, for example 29 [208], or phenols such as 30 [124–126] by engineered microbial biosynthesis. Purified enzyme from Escherichia coli has been studied for its reactivity with homologous five-carbon phosphosugars to yield KDO derivatives, and with modified nucleophiles. Thus, the stereochemically distinct fluoro-analogs of PEP (Z)- and (E)-31 could be separately condensed with d-erythrose 4-phosphate to yield, stereospecifically, the corresponding (3S)and (3R)-configured, fluoro-substituted DAHP derivatives 32 and 33, respectively (Figure 5.18) [127]. This provides direct evidence that the enzyme catalyzes si face addition of the C-3 of PEP to the re face of the acceptor aldehyde. 5.3.4
KDPG Aldolase and Related Enzymes
An aldolase specific for cleavage of 2-keto-3-deoxy-6-phospho-d-gluconate (35) (KDPGlc aldolase or KdgA; EC 4.1.2.14) is produced by many species of bacteria for degradation of 6-phosphogluconate to give pyruvate and d-
5.3 Pyruvate Aldolases
OPO3=
HO
OPO3=
OPO3= F O
CO2H
HO
CO2H
F
F
HO
O
F
CO2H
OPO3=
E-31
(3R)-32
Z-31
219
OH
CO2H
HO
OH
(3S)-33
Fig. 5.18
Stereospecific conversion of 3-fluoro-labeled PEP analogs to substituted DAHP derivatives by use of DAHP synthase.
KDPGlc aldolase
OH =
=O
3PO
CO2H
S
+
3PO
O
HO
2 OH
OH =O
KDPGal aldolase
3PO
R
OH
=
O CO2H
O3PO HO
35 O
Aldol reactions catalyzed in vivo by the 2-keto-3-deoxy-6-phospho-d-gluconate and 2-keto-3-deoxy-6-phospho-d-galactonate aldolases.
glyceraldehyde 3-phosphate 34 (Figure 5.19). The equilibrium constant favors synthesis (10 3 m1 ) [128]. Enzymes belonging to class I aldolases have been isolated [129–131] and cloned [132–135] from a variety of microbial sources. Genome sequencing of E. coli revealed that the enzyme is identical with 2-keto-4-hydroxyglutarate aldolase (KHG aldolase or KhgA; EC 4.1.3.16), which is involved in the catabolism of hydroxyproline [136, 137]. This activity is responsible for the retroaldolization of 4-hydroxy-2-oxoglutaric acid to pyruvate 2 and glyoxalate. In both cases, the enzyme recognizes an identical (4S) configuration. Enzyme preparations from liver or microbial sources were reported to have rather high substrate specificity [138] for the natural phosphorylated acceptor d-34 and, but at much reduced reaction rates, to have rather broad substrate tolerance for polar, short-chain aldehydes (Table 5.3) [139–141]. Simple aliphatic or aromatic aldehydes are not converted. High stereoselectivity of the enzyme has been used in the preparation of compounds 39 and 40 and in a two-step enzymatic synthesis of 38, the N-terminal amino acid portion of nikkomycin antibiotics (Figure 5.20) [142]. Thermophilic KdgA from Thermotoga maritima has been shown to have substrate tolerance with
OH CO2H
R
Fig. 5.19
OH CO2H
S
OH
O H
34
O3PO
=O
O
36
5 Enzyme-catalyzed Aldol Additions
220
Tab. 5.3
Substrate tolerance of 2-keto-3-deoxy-6-phospho-d-gluconate aldolase [140]. O R
H
O COOH
Substrate
R
Rel. Rate [%]
d-Glyceraldehyde 3-phosphate 3-Nitropropanal Chloroethanal d-Glyceraldehyde d-Lactaldehyde d-Ribose 5-phosphate Erythrose Glycolaldehyde
d-CH2 OHaCH2 OPO3 ¼ CH2 aCH2 NO2 CH2 Cl d-CHOHaCH2 OH d-CHOHaCH3 d-ribo-(CHOH)3 aCH2 OPO3 ¼ erythro-(CHOH)2 aCH2 OH CH2 OH
100.0 1.6 1.0 0.8 0.2 0.04 0.01 0.01
H
NH3
pyruvate
CO2H
N
O
37
R
pyruvate
KDPGlc aldolase N
OH
KDPGlc aldolase
OH
O
NADH
CO2H
N
PheDH NAD+
38
OH
NH2
ee >99.7% CO2 OH O
CO2H
S
HO
OH
H 3C S
HO
39
O
formate DH HCO2–
OH CO2H
40
Fig. 5.20
Stereoselective synthesis of the amino acid portion of nikkomycin antibiotics and hexulosonic acids using KDPGlc aldolase.
a breadth that seems comparable to, but qualitatively distinct from, that of mesophilic enzymes, although with diminished stereoselectivity [135]. The aldolase from E. coli has been mutated for improved acceptance of non-phosphorylated and enantiomeric substrates towards facilitated enzymatic syntheses of both d and l sugars [143, 144]. Comparable with the situation for the sialic acid and KDO lyases (vide supra), a class I lyase complementary to the KDPGlc aldolase is known that has a stereopreference for the (4S) configuration (Figure 5.19). The aldolase, which acts on 2-keto-3-deoxy-6-phospho-d-galactonate (36) (KDPGal aldolase; EC 4.1.2.21) and is less abundant [145, 146], has recently been studied for synthetic applications [147].
5.4 Dihydroxyacetone Phosphate Aldolases
O X
O
H
OPO3=
OH OH
=O
3PO
OH
O OPO3=
HO
HO
FruA
RhuA
3S,4R 3R,4S
3PO
OH
O
HO
O OPO3=
HO
OPO3= HO
OH H 3C
42
D-fructose 1,6-bisphosphate
=O
41
HO
43
L-rhamnulose 1-phosphate
TagA
FucA
OH
3S,4S 3R,4R
44
D-tagatose 1,6-bisphosphate
O OPO3=
H 3C HO
HO
45
L-fuculose 1-phosphate
Fig. 5.21
Aldol reactions catalyzed in vivo by the four stereo-complementary dihydroxyacetone phosphate-dependent aldolases.
5.4
Dihydroxyacetone Phosphate Aldolases
Whereas pyruvate aldolases form only a single stereogenic center, the aldolases specific for dihydroxyacetone phosphate (DHAP, 41) as a nucleophile create two new asymmetric centers at the termini of the new CaC bond. Particularly useful for synthetic applications is that Nature has evolved a full set of four unique aldolases (Figure 5.21) to cleave all possible stereochemical permutations of the vicinal diol at C-3/C-4 of ketose 1-phosphates 42–45 during the retro-aldol cleavage [26]. These aldolases have proved to be exceptionally powerful tools for asymmetric synthesis, particularly stereocontrolled synthesis of polyoxygenated compounds, because of their relaxed substrate specificity, high level of stereocontrol, and commercial availability. In the direction of synthesis this situation formally enables generation of all four possible stereoisomers of a desired product in building-block fashion [22, 25, 26]. In this manner the deliberate preparation of a specific target molecule can be addressed simply by choosing the corresponding enzyme and suitable starting material, affording full control over constitution and absolute and relative configuration of the desired product. Alternatively, the stereocomplementary nature of enzymes also enables a combinatorial, stereodivergent approach (Figure 5.1) to the generation of all stereoisomers in a
221
222 =
O3PO
5 Enzyme-catalyzed Aldol Additions
O HO HO
OH OPO3=
42
OH
O
FruA
OPO3=
HO
+
41
OPO3=
O
34
Fig. 5.22
Natural glycolytic substrates of fructose 1,6-bisphosphate aldolases.
small parallel library of diastereoisomers, e.g. for bioactivity screening [25]. Properties of the individual enzymes are therefore discussed separately from more general treatment of their preparative applications. The DHAP aldolases are quite specific for the phosphorylated nucleophile 41, which must therefore be prepared independently or generated in situ (cf. Section 5.4.4). Initial aldol products will thus contain a phosphate ester moiety, which facilitates product isolation, for example by barium salt precipitation or by use of ion-exchange techniques. The corresponding phosphate free compounds can be easily obtained by mild enzymatic hydrolysis using an inexpensive alkaline phosphatase at pH 8–9 [148], whereas baselabile compounds might require working at pH 5–6 using a more expensive acid phosphatase [149]. 5.4.1
FruA
The d-fructose 1,6-bisphosphate aldolase (FruA; EC 4.1.2.13) catalyzes, in vivo, the equilibrium addition of 41 to d-glyceraldehyde 3-phosphate (GA3P, 34) to give d-fructose 1,6-bisphosphate (42). The equilibrium constant for this reaction of 10 4 m1 strongly favors synthesis [56]. The enzyme occurs ubiquitously and has been isolated from a variety of prokaryotic and eukaryotic sources, both as class I and class II forms [29]. Corresponding FruA genes have been cloned from a variety of sources and overexpressed [25]. Typically, class I FruA enzymes are tetrameric whereas the class II FruA are dimers, with subunits of @40 kDa. The microbial class II aldolases are usually much more stable in solution (half-lives of several weeks to months) than their mammalian counterparts of class I (a few days) [149–151]. The class I FruA isolated from rabbit muscle (‘‘RAMA’’) is the aldolase used for preparative synthesis in the widest sense, because of its commercial availability and useful specific activity of @20 U mg1 . Its operating stability in solution is limiting, but recently more robust homologous enzymes have been cloned, e.g. from Staphylococcus carnosus [152] or from the extremophilic Thermus aquaticus [153], which promise to be unusually stable in synthetic applications [154]. Attempts at catalyst immobilization have been performed with rabbit muscle FruA, which has been covalently attached to microcarrier beads [58], cross-linked in enzyme crystals (CLEC) [59], or enclosed in a dialysis membrane [73]. It was recently shown that
5.4 Dihydroxyacetone Phosphate Aldolases Tab. 5.4
Substrate tolerance of fructose 1,6-bisphosphate aldolase. O R
OH
FruA H
DHAP
O OPO3=
R OH
R
Rel. Rate [%]
Yield [%]
Ref.
d-CHOHaCH2 OPO3 ¼ H CH3 CH2 Cl CH2 aCH3 CH2 aCH2 aCOOH CH2 OCH2 C6 H5 d-CH(OCH3 )aCH2 OH CH2 OH d-CHOHaCH3 l-CHOHaCH3 dl-CHOHaC2 H5 CH2 aCH2 OH CH2 aC(CH3 )2 OH dl-CHOHaCH2 F dl-CHOHaCH2 Cl dl-CHOHaCH2 aCHbCH2
100 105 120 340 105 – 25 22 33 10 10 10 – – – – –
95 – – 50 73 81 75 56 84 87 80 82 83 50 95 90 85
149, 177 149 149 149, 212 149 177 149 149 149, 177 149, 207 149 149 206, 207 205 207 206 206
less polar substrates can be converted as highly concentrated water-in-oil emulsions [63]. Literally hundreds of aldehydes have so far been tested successfully by enzymatic assay and preparative experiments as a replacement for 34 in rabbit muscle FruA catalyzed aldol additions [18, 25], and most of the corresponding aldol products have been isolated and characterized. A compilation of selected typical substrates and their reaction products is provided in Table 5.4, and further examples are indicated in Section 5.4.5. In comparison, metal dependant FruA enzymes are more specific for phosphorylated substrates and accept non-phosphorylated substrate analogs only with much reduced activity (< 1%). For chiral substituted aldehydes, racemic precursors are most often more readily available than enantiomerically pure material, but must be resolved either before or during the aldol step. Rabbit FruA discriminates between the enantiomers of its natural substrate with a 20:1 preference for d-GA3P (34) over its l antipode [149]. Assistance from anionic binding was revealed by a study on a homologous series of carboxylated 2-hydroxyaldehydes for which enantioselectivity was optimum when the distance of the charged group equaled that of 34 (Figure 5.23) [155]. The resolution of racemic substrates is not, however, generally useful, because the kinetic enantiose-
223
224
5 Enzyme-catalyzed Aldol Additions
O
O
O –O
–O
P
–O
OH
46 E > 10
O O OH
34 E > 10
Fig. 5.23
Kinetic enantiopreference of rabbit muscle FruA.
lectivity for non-ionic aldehydes is rather low [149]. 3-Azido substituents (95) can lead to up to ninefold preference for enantiomers in kinetically controlled experiments [156] whereas hydroxyl (usually some preference for the d antipodes) and derived functionality, or chiral centers at a larger distance, rarely enable more than statistical diastereomer formation. 5.4.2
TagA
The d-tagatose 1,6-bisphosphate aldolase (TagA; EC 4.1.2.n) is involved in the catabolism of d-galacto-configured carbohydrates and catalyzes the reversible cleavage of d-tagatose 1,6-bisphosphate (44) to d-glyceraldehyde 3phosphate (34) and dihydroxyacetone phosphate (41). Enzymes of class I that occur in a variety of Coccus species seem to have apparently no stereochemical selectivity with regard to distinction between 42 and 44 [157], whereas class II aldolases from Gram-positive microorganisms are highly stereoselective for the natural substrate in both cleavage and synthesis directions [158, 159]. The genes coding for TagA have been cloned from Coccus strains [160] and from E. coli [53, 161]. The reverse, synthetic reaction can be used to prepare ketose bisphosphates, as has been demonstrated by an expeditious multienzymatic synthesis of the all-cis (3S,4S)-configured d-tagatose 1,6-bisphosphate 44 from dihydroxyacetone including its cofactor-dependent phosphorylation, using the purified TagA from E. coli (Figure 5.24) [158, 159]. The aldolase also accepts a range of unphosphorylated aldehydes as substrates but produces diastereomeric mixtures only. This lack of stereoselectivity with generic substrate analogs, which makes native TagA enzymes synthetically less useful, has stimulated recent X-ray structure determination and protein engineering to improve its properties [53, 54, 162]. 5.4.3
RhuA and FucA
The l-rhamnulose 1-phosphate aldolase (RhuA; EC 4.1.2.19) and the lfuculose 1-phosphate aldolase (FucA; EC 4.1.2.17) are found in many microorganisms where they are responsible for the degradation of deoxysugars l-rhamnose and l-fucose to give 41 and l-lactaldehyde (Figure 5.25). RhuA is specific for cleavage and synthesis of a l-threo diol unit whereas FucA
5.4 Dihydroxyacetone Phosphate Aldolases
glycerol kinase
O HO
OH
O OPO3=
HO
47
41 ATP
=O PO 3
ADP
TagA
TPI pyruvate pyruvate kinase PEP
225
HO
O HO
OH
44
OH OPO3=
O
34
H Fig. 5.24
Enzymatic one-pot synthesis of tagatose 1,6-bisphosphate based on the stereoselective TagA from E. coli.
OPO3=
O
HO
OH
H 3C
OH
RhuA
DHAP
FucA
O H 3C
H OH
43
OPO3=
O
DHAP
OH
H 3C HO
OH
45
Fig. 5.25
Natural substrates of microbial deoxysugar phosphate aldolases.
recognizes the corresponding d-erythro configuration. Both enzymes have been isolated from several sources [163–165], and the proteins from E. coli have been shown to be homotetrameric Zn 2þ -dependent aldolases with subunit molecular weights of @25 kDa and @30 kDa, respectively [150]. Cloning of RhuA [166, 167] and FucA [168] enzymes from several microorganisms has been reported. Efficient overexpression [150, 160, 169] has set the stage for X-ray structure determinations of both E. coli proteins [48, 49]. Like a number of other aldolases, both the RhuA and FucA enzymes are commercially available. Overall practical features make the RhuA and FucA enzymes quite similar for synthetic applications. Both metalloproteins have very high stability in the presence of low Zn 2þ concentrations with half-lives in the range of months at room temperature, and the enzymes even tolerate the presence of large proportions of organic cosolvents (b30%) [150]. Both have very broad substrate tolerance for variously substituted aldehydes, which is very similar to that of the FruA enzymes, with conversion rates generally being usefully high (Table 5.5). Characteristically, of all the DHAP aldolases yet investigated the RhuA has the greatest tolerance of sterically congested acceptor substrates, as exemplified by the conversion of the tertiary aldehyde 2,2-dimethyl-3-hydroxypropanal 48 (Figure 5.26) [25]. Aldehydes carrying an anionically charged group close to the carbonyl group, for example gly-
OPO3=
226
5 Enzyme-catalyzed Aldol Additions Tab. 5.5
Substrate tolerance of l-rhamnulose 1-phosphate and l-fuculose 1-phosphate aldolases [150, 170]. O R
H
DHAP
O
OH
aldolase
OH
O
OPO3= + R
R
OPO3= OH
OH
R
Rel. Rate [%]
RhuA Selectivity threo:erythro
Yield [%]
Rel. Rate [%]
FucA Selectivity threo:erythro
Yield [%]
l-CH2 OHaCH3 CH2 OH d-CHOHaCH2 OH l-CHOHaCH2 OH CH2 aCH2 OH CHOHaCH2 OCH3 CHOHaCH2 N3 CHOHaCH2 F H CH3 CH(CH3 )2
100 43 42 41 29 – – – 22 32 22
>97:3 >97:3 >97:3 >97:3 >97:3 >97:3 >97:3 >97:3 – 69:31 97:3
95 82 84 91 73 77 97 95 81 84 88
100 38 28 17 11 – – – 44 14 20
<3:97 <3:97 <3:97 <3:97 <3:97 <3:97 <3:97 <3:97 – 5:95 30:70
83 85 82 86 78 83 80 86 73 54 58
1. RhuA, DHAP 2. P'ase HO
CHO
48
O HO HO
49
OH
OH
Fig. 5.26
Substrate tolerance of RhuA for tertiary hydroxyaldehyde.
ceraldehyde phosphates, other sugar phosphates, or glyoxylic acid, are not converted by the deoxysugar aldolases [25, 148]. The stereospecificity of both enzymes for the absolute (3R) configuration is mechanism-based (vide supra), and RhuA generally directs attack of the DHAP enolate to the re face of an approaching aldehyde carbonyl and is thereby specific for synthesis of a (3R,4S)-trans diol unit [150] whereas FucA controls si face attack to create the corresponding (3R,4R)-cis configuration [150, 169]. This specificity for a vicinal configuration is, however, somewhat substrate-dependent, in that simple aliphatic aldehydes can give rise to a certain fraction of the opposite diastereomer [25, 150]. In general, stereochemical fidelity is usually higher, and diastereospecific results are observed more often with the FucA than with the RhuA enzyme. Stereocontrol is, in general, usually highly effective with aldehydes carrying a 2- or 3-hydroxyl group (Table 5.5). In addition, both aldolases have strong kinetic
5.4 Dihydroxyacetone Phosphate Aldolases
RhuA
OPO3=
O
OH
R
O R
HO
O +
R
OH
D,L-50
de ≥ 90%
51
DHAP
OH
R HO
O +
R
H OH
OH
52
D-50
OPO3=
O
FucA
H OH
OH H +
227
de ≥ 90%
D-50
R = H3C–, H5C2–, H2C=CH–, H2C=CH–CH2–, FH2C–, N3CH2–, H3COCH2– Fig. 5.27
Kinetic enantiopreference of class II DHAP aldolases useful for racemic resolution of a-hydroxyaldehydes.
preference for l-configured enantiomers of 2-hydroxyaldehydes 50 (Figure 5.27), which facilitates racemate resolution [170, 171]. Essentially, this feature enables concurrent determination of three contiguous chiral centers in final products 51 or 52 having an l configuration (d.e. b95) even when starting from more readily accessible racemic material. 5.4.4
DHAP Synthesis
Apparently, all DHAP aldolases are highly specific for 41 as the donor component for mechanistic reasons [32, 50], which necessitates economical access to this compound for synthetic applications. Owing to the limited stability of 41 in solution, particularly at alkaline pH [172, 173], it is preferentially generated in situ to avoid high stationary concentrations. The most convenient method is formation of two equivalents of 41 by retro-aldol cleavage from commercially available fructose 1,6-bisphosphate (FBP, 42) by the combined action of FruA and triose phosphate isomerase (Figures 5.22 and 5.28 inset) [149]. This scheme has been extended into a highly integrated, multienzymatic scheme for efficacious in-situ preparation of 41 from inexpensive glucose, fructose, or sucrose by using an ‘‘artificial metabolism’’ in vitro made up from up to seven inexpensive enzymes (Figure 5.28) [174]. Complications can arise from incomplete conversion, depending on the thermodynamic stability of the final product relative to 42, because of the overall equilibrium nature of the system, and from difficulties separating the products from other phosphorylated components. Dihydroxyacetone 47 can be enzymatically phosphorylated using a glycerol kinase with ATP regeneration (see, for example, Figure 5.24) [175], or by transphosphorylation from phosphatidyl choline using phospholipases
228
5 Enzyme-catalyzed Aldol Additions
OH HO HO
O OH
HO OH O sucrose HOH2C
CH2OH
HO O
OH
O
HO HO
glucose OH
O OH HO
OH
OH OH
fructose
5 enzymes ATP, PEP
=
O3PO
O OH HO HO
OPO3=
42 FruA
OH OPO3=
O H
O
TPI
34
OPO3=
HO
41
Fig. 5.28
Multi-enzymatic ‘‘artificial metabolism’’ for in-situ generation of dihydroxyacetone phosphate from inexpensive sugars.
[176]. Alternatively, 41 can be formed from glycerol by successive phosphorylation and oxidation effected by a combination of glycerol kinase and glycerol phosphate dehydrogenase, with an integrated double ATP/NADþ cofactor recycling system [148]. A more advanced technique for clean generation of 41 in situ is based on oxidation of l-glycerol 3-phosphate (74) catalyzed by microbial flavinedependent glycerol phosphate oxidases (GPO; Figure 5.29, box) [177]. This method generates 41 practically quantitatively and with high chemical purity without a need for separate cofactor regeneration. Both oxygen from air or from a H2 O2 –catalase system can be used to sustain oxygenation. Because DHAP aldolases were found to be insensitive to oxygenated solutions, the oxidative generation of 41 can be smoothly coupled to synthetic aldol reactions [177]. This method has recently been extended to include reversible glycerol phosphorylation from inexpensive pyrophosphate (Figure 5.29).
5.4 Dihydroxyacetone Phosphate Aldolases OH
229
OH
HO
O
OH
OH 4 steps, 1 pot
glycerol
OH
PPi
Pi phytase pH 4.0
phytase pH 4.0
Pi
GPO pH 7.5
OH =
HO
OH
OH
O OPO3=
butanal
H 2O 2
OH
41
H 2O
OPO3=
HO
OPO3=
HO O2 1/2
FruA pH 7.5
O
OPO3
+
Fig. 5.29
Enzymatic in-situ generation of dihydroxyacetone phosphate for stereoselective aldol reactions using DHAP aldolases (box), and extension by pH-controlled, integrated precursor preparation and product liberation.
O HO
O O
41
PO3
=
53
HO
O S
54
PO3
=
HO
55
H N
O PO3
=
HO
PO3=
56
Fig. 5.30
Substrate analogs of dihydroxyacetone phosphate accessible by the GPO oxidation method.
Because phytase, an inexpensive acid phosphatase, is only active at low pH but virtually inactive at pH 7.5 in which aldolases have their catalytic optimum, this enables the independent staging of a one-pot synthetic cascade between (1) transphosphorylation, (2) aldolization, and (3) product dephosphorylation simply by switching the pH [178]. The GPO procedure can also be used for preparative synthesis of the corresponding phosphorothioate (54), phosphoramidate (55), and methylene phosphonate (56) analogs of 41 (Figure 5.30) from suitable diol precursors [179] which are used as aldolase substrates [177]. Such isosteric replacements of the phosphate ester oxygen were found to be tolerated by several class I and class II aldolases, and only some specific enzymes failed to accept the less polar phosphonate 56 [180]. Thus, sugar phosphonates (for example, 88 and 89) that mimic metabolic intermediates but are hydrolytically stable to phosphatase degradation can be rapidly synthesized (see Figure 5.42).
230
5 Enzyme-catalyzed Aldol Additions
O HO
OH O
47
HO
HX
OX
57 X = AsO3=
ketose
ketose X-ester
DHAP aldolase aldehyde
VO4=
Fig. 5.31
Spontaneous, reversible formation of arsenate and vanadate analogs of dihydroxyacetone phosphate in situ for enzymatic aldol additions.
Interestingly enough, dihydroxyacetone 47 in the presence of higher concentrations of inorganic arsenate reacts reversibly to form the corresponding arsenate ester 57 in situ which can replace 41 as a donor in enzymecatalyzed aldol reactions (Figure 5.31) [181, 182]. This procedure suffers from rather low reaction rates and the high toxicity of arsenates, however. Inorganic vanadate also spontaneously forms the corresponding vanadate ester analog under conditions that reduce its oxidation potential; so far only RhuA has been shown to accept the vanadate mimic 57 for preparative conversions [25]. Conversely, the dihydroxyacetone sulfate analog cannot be used in CaC bond-formation [183], and no replacement of the free hydroxy function in 41 for other electron-withdrawing substituents is tolerated [149]. Several alternative procedures have been developed for chemical synthesis of 41. Acetals of the dimer of 47 can be phosphoryated using phosphoroxy chloride [184] or diphenyl chlorophosphate [185], or by phosphitylation then oxidation [186]. After phosphate deprotection, free 41 is obtained, by acid hydrolysis, in overall yields of up to 60%. New procedures have recently been developed by controlled successive substitutions of dibromoacetone [187, 188] or by controlled hydrolysis of a cyclic phosphate diester of 47 [189]. 5.4.5
Applications
Four types of DHAP aldolase with distinct stereospecificity are available that have rather similar broad substrate tolerance (Figure 5.21). Despite having a rather unique physiological function in vivo, each enzyme will accept most differently substituted or unsubstituted aliphatic aldehydes in vitro as the acceptor component at a synthetically useful rate. Thus, from one common aldehyde substrate a full set of four possible diastereomeric
5.4 Dihydroxyacetone Phosphate Aldolases
aldolase DHAP
OH R
OH
OPO3=
OH
P'ase
R
CHO
OH
HO
O
aldolase DHAP
R
CHO
OH
OH
OH
ketofuranose
O
P'ase
R
O
R OH
3-hydroxyaldehyde
OH OH
2-hydroxyaldehyde
OH
O
R
231
OPO3=
OH OH OH
OH ketopyranose
Fig. 5.32
General scheme for formation of ketofuranoses and ketopyranoses from 2- and 3-hydroxyaldehydes.
products becomes synthetically accessible in a stereodivergent manner (Figure 5.1). This building block-type feature renders the DHAP aldolases particularly powerful catalysts for asymmetric synthesis [25]. The FruA from rabbit muscle has been most extensively applied in synthesis, because of its commercial availability but results discussed below should be considered as exemplary demonstrations only, and complementary conversions can probably also be achieved by use of one of the other enzymes with different aldol stereospecificity. A vast number of aldehydes have so far been used as substrates of this set of aldolases in preparative experiments [20, 24, 25, 190]. With the exception of generic aldehydes, acceptor components must be prepared by chemical synthesis. In general, ozonolysis of suitable olefins (with appropriate removal of the second fragment if this also is a substrate) or acid-catalyzed acetal deprotection are convenient routes for generation of aldehyde substrates under mild conditions. Chiral aldehydes require either asymmetric synthesis of the respective enantiomer or separation of diastereomeric products produced from racemic material. In specific cases racemate resolution can be effected by the enantiomer selectivity of an aldolase (kinetic resolution; Figure 5.27) or when isomeric products have significantly different stability (thermodynamic resolution; vide infra). Typical applications of the DHAP aldolases include the synthesis of monosaccharides and derivatives of sugars from suitable functionalized aldehyde precursors. High conversion rates and yields are usually achieved with 2- or 3-hydroxyaldehydes, because for these compounds reaction equilibria benefit from the cyclization of the products in aqueous solution to give more stable furanose or pyranose isomers (Figure 5.32). For example, enantiomers of glyceraldehyde are good substrates, and stereoselective addition of dihydroxyacetone phosphate produces enantiomerically pure ketohexose
5 Enzyme-catalyzed Aldol Additions
232
1. AD-mix-β, 2. Pd(OH)2, H2
OH L
CHO
1. RhuA, DHAP 2. P'ase
OH
OH
OH
O OH
OH
O
OH
L-fructose
O 1. AD-mix-α, 2. Pd(OH)2, H2
58
OH D
CHO
OH
1. FruA, DHAP 2. P'ase
OH
OH
O OH
OH
OH
D-fructose
Fig. 5.33
Combination of metal-assisted asymmetric synthesis and enzymatic aldolization.
1-phosphates in high yield [149, 150, 170]; from these the free ketosugars are obtained by enzymatic dephosphorylation. Only TagA catalysis is an exception, because this enzyme is not erythroselective with unphosphorylated substrates [158, 159]. Using RhuA and FucA, the less common l-configured ketohexoses l-fructose and l-tagatose can be obtained as pure diastereomers from racemic glyceraldehyde also, because of the high kinetic enantiomer selectivity of these catalysts (Figure 5.27) [170]. Alternatively, non-racemic hydroxyaldehydes can be prepared for use in aldolase reactions by Sharpless asymmetric dihydroxylation from suitably protected precursors 58 (Figure 5.33) [191]. This general approach has been followed for the de novo synthesis of a multitude of differently substituted, unsaturated [192, 193], or regiospecifically labeled sugars [194]. Unusual branched-chain (60, 61) and spiroanulated sugars (63, 64) have been synthesized from the corresponding aldehyde precursors (Figure 5.34) [174]. 6-Substituted d-fructofuranoside derivatives such as aromatic sulfonamide 62 (a low nanomolar Trypanosoma brucei inhibitor) [197] are accessible via 6-azido-6-deoxyfructose from 3azido-2(R)-hydroxypropanal 95 by FruA catalysis [151, 196]. In an approach resembling the ‘‘inversion strategy’’ (vide infra) an a-C-mannoside 65 has been prepared from d-ribose 5-phosphate [216]. The synthesis of 6-C-perfluoroalkyl-d-fructose 66 met challenges from the strong hydrophobicity and electron-withdrawing capacity of a fluorous chain, and the product’s potential surfactant properties [198]. The l-sorbo-configured homoC-nucleoside analog 67 has been synthesized as a structural analog of adenosine from an enantiomerically pure (S)-aldehyde precursor [195]. FruA-based, diastereoselective chain extension of chiral pool carbohydrates or their corresponding phosphates has been achieved in the synthesis of high-carbon ketose 1-mono- or 1,n-bisphosphates [199]. Such heptulose to nonulose derivatives are of biological importance as phosphorylated intermediates of the pentose phosphate pathway or as sialic acid analogs (for
5.4 Dihydroxyacetone Phosphate Aldolases
OH
OH
=
O3PO
O HO
OH OH
(CH3)2N
OH
65
HO OH
O OCH3 HO OH HO
HO HO
O
H3C
59
H N SO2
HO
OH
OPO3=
62
OH
HO
OPO3=
61
OH
O
63
OH
O HO
H3 C
60
O HO HO
H3 C
OPO3=
233
O
OH CH3
HO
OPO3=
OH
64 N
OH
OH O
HO
O
F17C8 OH
HO
N OH
OH
OH
66
HO
O HO
HO HO
67
Fig. 5.34
Examples of product structures accessible by enzymatic aldolization.
example, 59) that are difficult to isolate from natural sources. Synthesis of sugar bisphosphates is rather unique for FruA catalysis, because the deoxy sugar aldolases (FucA, RhuA) will not usually accept anionically charged substrates. On the basis of FruA-catalyzed aldol reactions 3-deoxy-d-arabinoheptulosonic acid 7-phosphate (DAHP, 26), an intermediate of the shikimic acid pathway, has been synthesized from N-acetylaspartic semialdehyde 68 (Figure 5.35) [200]. Precursors to KDO (Section 5.3.2) and its 4-deoxy analog (71) have been prepared by FruA catalysis from aldehydes 70 that incorporate an acrylic moiety for further functionalization [201]. Pendant anionically charged chains have been extended from O- or Cglycosidic aldehydes (72) to furnish low-molecular-weight mimics of the sialyl Lewis X tetrasaccharide, for example 73 (Figure 5.36) [202]. Other higher-carbon sugar derivatives such as the bicyclic sugar 76 have been prepared by diastereoselective chain extension from simple alkyl galactosides (75; Figure 5.36) after their terminal oxidation in situ by use of a galactose oxidase (GalO; EC 1.1.3.9). The whole scheme can be conveniently effected as a one-pot operation including the parallel generation of 41 by the GPO method [203]. Further bicyclic carbohydrate structures similar to 76 have also been prepared by uni- [152] and bidirectional extension of dialdehyde substrates (see Figure 5.48) [204]. The Zn 2þ -dependent aldolases facilitate effective kinetic resolution of racemic 2-hydroxyaldehydes (rac-50) as substrates by an overwhelming preference (d.e. b95) for the l-configured enantiomers l-50; this enables control
NH2 N
N
5 Enzyme-catalyzed Aldol Additions
234
CO2CH3
H
OH
3PO
OPO3= COOH
(AcO)3BH–
NHAc
O
=O
FruA DHAP
OH
OH
O
HO HO
AcHN
CO2H
69
68 FruA DHAP
X H
OH
OH
OH
29 HO HO
X
OH O CO2H
X P'ase
O
O
COOH
HO
OH
COOH
X = OH KDO X=H 4-deoxy-KDO
71
70 Fig. 5.35
Synthetic approaches to DAHP and KDO by a ‘‘backbone inversion’’ strategy using FruA catalysis.
HO
HO
OH
O
O
DHAP, FruA
OH
=O
72
H
OH
OH
O
OH
O
OH
OH
3PO
73 OH
OH
O OPO3=
HO
GPO
=O
OPO3=
HO
3PO
OH
74 O2 HO
OCH3 OH
GalO
HO
H 2O 2
O
RhuA HO
OH O
HO
75
Cat
41
OH O OCH3
HO
CHO O
OH OCH3
HO OH
OH HO
=O
HO
O
76 Fig. 5.36
Sialyl Lewisx -related selectin inhibitor by chain extension of C-glycosyl aldehydes using enzymatic aldolization, and multienzymatic oxidation–aldolization strategy for synthesis of bicyclic higher-carbon sugars.
OH
O
3PO
OCH3
OH
5.4 Dihydroxyacetone Phosphate Aldolases
OH
OH
235
OH
O
OPO3=
S
H 3C
H 3C OH
O
H3C
OH H
77
OPO3=
OH
+ DHAP
OH
O
H
X 3C
80
78
HO
X = H, F
OPO3=
HO
1. FBP, FruA, TPI 2. P'ase X 3C
O OH
OH
H 3C R
OH
O
OH
FruA
H 3C
OH
O
OH OH
O
OPO3=
OH
79
HO
NaIO4 NaBH4
OH X 3C
O
OH
OH
81
Fig. 5.37
Diastereoselectivity in FruA catalyzed aldol additions to 3-hydroxyaldehydes under thermodynamic control, and synthesis of lfucose derivatives based on thermodynamic preference.
of three contiguous centers of chirality in the products (51 and 52; Figure 5.27) [170, 171]. This feature has been exploited in highly stereoselective syntheses of several rare ketose phosphates and of naturally occurring or related non-natural l sugars. For example, the kinetic enantioselectivity of FucA was not impaired by steric bulk or degree of unsaturation in the aldehyde substrates (de b90% for 50) in syntheses of higher homologs and unsaturated analogs of l-fucose 84 (see Figure 5.39) [193]. For comparison, the kinetic enantioselectivity of class I aldolases is limited to aldehydes carrying an anionic charge, and distinction of uncharged substrates is insignificant (Figure 5.23) [149, 155]. Under fully equilibrating conditions, however, diastereoselectivity of aldolase reactions can be steered by thermodynamic control to favor the energetically most stable product [149, 174, 205, 206]. Particularly strong discrimination results from utilization of 3-hydroxylated aldehydes such as 77, because of the cyclization of products to form pyranoid rings in water (Figure 5.37). The pronounced conformational destabilization by diaxial repulsion (79) strongly supports those diastereoisomers with a maximum of equatorial substituents [204, 206]. Thus, in FruA-catalyzed reactions (3S)configured hydroxyaldehydes are the preferred substrates giving the most stable all-equatorial substitution in the product (for example 78) with a de of up to 95%. Similarly, 2-alkylated aldehydes can be resolved, because of the high steric preference of an alkyl group for an equatorial position [205].
X = H, F
236
O
FruA DHAP
OR
H
5 Enzyme-catalyzed Aldol Additions
OR
O
OH
HO
P'ase
reduction
OR
deprotection
OR
OH
OH
82
OH
O
HO
H OH 2-deoxyaldose
O =O
O
OH
1. NaBH4
54
O
H
3PS
O
FruA
O =O
OH
3PS
2. H3O+
O O
OH
83
3. Ni-H2 4. HCl
H3C HO HO
O OH
D-olivose
Fig. 5.38
‘‘Inverted’’ approach for aldose synthesis using FruA catalysis, and application of the strategy for deoxysugar synthesis based on a phosphorothioate analog.
Under conditions of thermodynamic control the enantio-complementary nature of the FruA–RhuA biocatalyst pair enables construction of mirror image products 78 and ent-78 from racemic 3-hydroxybutanal 77 with similar selectivity, but preference for opposite enantiomers [25]. The allequatorial substitution in the predominant product can facilitate its separation by crystallization so that the remaining mixture can be re-subjected to further equilibration to maximize the yield of the preferred isomer 78 [177]. This general technique has recently found an application in a novel approach for the de novo synthesis of 4,6-dideoxy sugars such as 4-deoxy-lfucose 81 or its trifluoromethylated analog (Figure 5.37) [25]. Conversely, FucA will produce diastereomers at low de, because of the more balanced stability relationships for pyranoid products sharing a cis-diol substitution pattern. With racemic 2-hydroxylated aldehydes, thermodynamic control in FruA- or RhuA-catalyzed reactions favors (2R) configured enantiomers but also with lower discrimination (de up to 55%), because of the higher flexibility of the corresponding ketofuranose rings [25, 206]. Because of the structure of the DHAP nucleophile, the enzymatic aldolization technique is ideal for direct synthesis of ketose monosaccharides and related derivatives or analogs (Figure 5.32). For an entry to aldoses an ‘‘inversion strategy’’ has been developed (Figure 5.38) which utilizes monoprotected dialdehydes (for example, 82 or 83) for aldolization and, after stereoselective ketone reduction, provides free aldoses on deprotection of the masked aldehyde function [209]. In this respect, the phosphorothioate analog of DHAP 54 makes terminally deoxygenated sugars accessible via a sequence of FruA-catalyzed aldolization followed by reductive desulfurization, as illustrated by the preparation of d-olivose along this ‘‘inversion strategy’’
5.4 Dihydroxyacetone Phosphate Aldolases
OH O R
50
1. FucA, DHAP 2. P'ase
OH
O R HO
FucI R
OH OH
O
OH OH
HO OH
237
84
R = CH3, C2H5, CH=CH2, C≡CH Fig. 5.39
Short enzymatic synthesis of l-fucose and hydrophobic analogs by aldolization–ketol isomerization, including kinetic resolution of racemic hydroxyaldehyde precursors.
[219]. Otherwise, deoxy sugars are usually only obtained when the deoxy functionality is introduced with the aldehyde. More general access to biologically important and structurally more diverse aldose isomers makes use of the enzymatic interconversion of ketoses and aldoses that in Nature is catalyzed by ketol isomerases. For full realization of the concept of enzymatic stereodivergent carbohydrate synthesis the stereochemically complementary l-rhamnose (RhaI; EC 5.3.1.14) and lfucose (FucI; EC 5.3.1.3) isomerases from E. coli have recently been shown to have broad substrate tolerance [25, 170, 193, 210]. Both enzymes convert sugars and their derivatives that have a common (3R)-OH configuration but might deviate in stereochemistry or substitution pattern at subsequent positions of the chain [25, 26]. Because ketose products from RhuA- and FucA-catalyzed aldol reactions share the (3R) specificity, they can both be converted by the isomerases to corresponding aldose isomers; this enables access to a broad segment of aldose configurational space in a stereospecific, building block manner [26, 211]. This strategy has been illustrated by the synthesis of several l-configured aldohexoses using different enzyme combinations, and by tandem FucA–FucI catalysis in the synthesis of new lfucose analogs 84 having tails with increased hydrophobicity and reactivity (Figure 5.39), starting from simple higher homologs of lactaldehyde and unsaturated analogs 50 [193, 210]. Similar results have been achieved by using a glucose isomerase (GlcI; EC 5.3.1.5) which is an industrially important enzyme for isomerization of d-glucose to d-fructose (Figure 5.40) but has a more narrow specificity. This enzyme also accepts derivatives and analogs of d-fructose and has been used in combined enzymatic syntheses, particularly of 6-modified d-glucose derivatives [207]. Further structural diversification of FruA products has been investigated by enzymatic reduction to corresponding alditols using stereochemically complementary alditol dehydrogenases (Figure 5.40). Indeed, stereospecific (2S)- and (2R)-specific reduction of simple derivatives of d-fructose could be achieved by NADH-dependent catalysis of sorbitol dehydrogenase (EC 1.1.1.14) [209] or mannitol dehydrogenase (EC 1.1.1.67), respectively [26].
5 Enzyme-catalyzed Aldol Additions
238
OH
OH
O
OH
OH
OH
GlcI
OH
CHO OH
OH
OH
D-fructose
D-glucose
SorD OH
OH
OH
MtlD
OH
OH
OH
OH
OH OH
OH
OH
OH
sorbitol
OH
mannitol
Fig. 5.40
Stereospecific diversification of aldol products by ketol isomerization or carbonyl reduction.
1. FruA, DHAP 2. P'ase
OH O2N
AcO O 2N
O HO
OH
CHO
AcO
steps
1. FruA, DHAP CHO
AcO
OPO= OH
O 2. P'ase
H3C
85
OH (Et2O)2OP CN
CN
NO2
OH
HO
(Et2O)2OP
OH
OH
OH OR
OH
HO
OR RO
86
87
CN
Fig. 5.41
Preparation of cyclitols by chemoenzymatic tandem reactions.
Several cyclitols (e.g. 85–87) have been prepared from aldol products carrying suitably positioned halogen, nitro, or phosphonate functionality by subsequent radical or nucleophilic cyclization reactions (Figure 5.41) [212– 214]. A cyclitol product was also found to be correctly configured to serve as a precursor to the spirocyclic Streptomyces metabolite sphydrofuran 63 [215].
5.4 Dihydroxyacetone Phosphate Aldolases
O HO FruA O
O
+
HO
H
HO
HO
PO3=
PO3=
O OH OH
PO3=
56
OH
88
HO
RhuA
FucA
OH OH
HO
(EtO)2P
OH
( )n
1. FruA/TPI FBP
H O
2. P'ase
90
O (EtO)2P
OH
( )n
O
89 PO3=
O
O
239
OH
OH
HO
91 n = 1,2
Fig. 5.42
Stereoselective synthesis of hydrolytically stable sugar phosphonates either from the bio-isosteric phosphonate analog of DHAP or from phosphonylated aldehydes.
Phosphonate analogs to phosphate esters, in which the PaO bond is formally replaced by a PaC bond, have attracted attention because of their stability toward the hydrolytic action of phosphatases, which renders them potential inhibitors or regulators of metabolic processes. Introduction of the phosphonate moiety by enzyme catalysis might, in fact, be achieved by two alternative pathways. The first employs the bioisosteric methylene phosphonate analog 56, which gives products related to sugar 1-phosphates such as 88 and 89 (Figure 5.42) [177, 180]. This strategy is rather effective because of the inherent stability of 56 as a replacement for 41 but depends on the individual tolerance of the aldolase for structural modification close to the reactive center. The second option is a suitable choice for a phosphonylated aldehyde such as 90, which gives rise to analogs of sugar o-phosphates 91 [217, 218]. When placing thiol substitution in the aldehyde component for aldolase catalysis, the reaction products can cyclize to form rather stable cyclic hemiacetal structures. Such thiosugars are a structural variation of carbohydrates that have interesting biological properties, for example glycosidase inhibition. From 2- and 3-thiolated aldehydes stereochemical sets of furanoid or pyranoid thiosugars such as 92–94 have been prepared using different DHAP aldolases (Figure 5.43) [148, 220, 221]. It is worth noting that the observed unbiased stereoselectivity indicates the full equivalence of OH and SH substituents for correct substrate recognition. The structural resemblance of ‘‘azasugars’’ (1-deoxy sugars in which an
240
S HO R
HO
5 Enzyme-catalyzed Aldol Additions
1. FruA, DHAP 2. P'ase
OH OH
1. RhuA, DHAP 2. P'ase
HS
HO HO
CHO
S
S OH R
ent-92
92
S
OH
OH HS
CHO
1. FruA, DHAP 2. P'ase
1. FucA, DHAP 2. P'ase OH
OH S
HO
OH OH
S
HO HO
HO
93
OH
1. RhuA, DHAP 2. P'ase HO HO
S HO
OH
94
OH
OH
ent-93
Fig. 5.43
Stereodivergent enzymatic synthesis of thiosugars.
imino group replaces the ring oxygen) to transition states or intermediates of glyco-processing enzymes has made these compounds an attractive subject of research, because of their potential value as enzyme inhibitors for therapeutic applications. An important and flexible synthetic strategy has been developed which consists in stereoselective enzymatic aldol addition to an azido aldehyde followed by azide hydrogenation with intramolecular reductive amination [222, 223]. Particularly noteworthy are the stereodivergent chemoenzymatic syntheses of diastereomers of the nojirimycin type from 3-azidoglyceraldehyde 95 that have been developed independently by several groups (Figure 5.44) [151, 196, 224–227]. Because of the low kinetic selectivity of FruA for 2-hydroxyaldehydes, use of enantiomerically pure aldehyde proved superior to the racemate for preparation of the parent 1-deoxy-d-nojirimycin. An extensive array of further 5-, 6- and 7-membered ring alkaloid analogs have since been made by following the same general strategy. For structural variation, as exemplified by 96–98, differently substituted azido aldehydes of suitable chain length were converted by the distinct DHAP aldolases (Figure 5.45) [151, 156, 225, 228–230]. Stereocontrol during the reductive cyclization seems to be best effected by Pd-catalyzed hydrogenation. The technique has been extended to the bifunctional class of azasugar phosphonic acids, for example 99, by exploiting the tolerance of rabbit FruA for the bioisosteric phosphonate nucleophile 56 [231]. The resulting heterocycles are a minimum structural motif of glycosyltransferase transition-state analogs. In a strategy inverse of that employed for compound 99, FucA
5.4 Dihydroxyacetone Phosphate Aldolases
HO
OH NH
HO HO
HO 1-deoxynojirimycin HO HO HN
OH OH
FruA
RhuA
a
a
RhuA
FruA
a
a
CHO
OHC
HO HO
HO HO HN
OH
OH NH
OH OH
FucA a
HN
OH OH
HO
HO HO
OH OH NH
S
R
HO
241
HO
HO N3
N3
D-95
L-95
TagA a
TagA
FucA
a
a
OH
HN OH OH
HO HO
Fig. 5.44
Stereodivergent synthesis of 1-deoxy azasugars of the nojirimycin type by twostep enzymatic aldolization/catalytic reductive amination (a: DHAP; P’ase; H2 /Pd–C).
and FruA were employed in the chemoenzymic synthesis of six-membered iminocyclitol phosphonic acids [232]. Another illustrative example of the azasugar synthetic strategy is the chemoenzymatic synthesis of the naturally occurring australine, 3-epiaustraline, and 7-epialexin (Figure 5.46) [233]. The bicyclic pyrrolizidine core structure resulted from twofold reductive amination of a linear precursor 101 in which the asymmetric hydroxylation sites had been installed during an aldolase-catalyzed chain extension from aminoaldehyde 100. A bidirectional aldolization approach furnished the Cglycosidically linked azadisaccharide 102 as an example of a disaccharide mimic. Ozonolysis of a racemic azido-substituted cyclohexenediol precursor was followed by tandem DHAP addition to both aldehydic termini to yield an intermediate azido-substituted dipyranoid 2,11-diulose which, when hydrogenated over Pd catalyst, gave the aza-C-disaccharide 102 highly selectively as a single diastereomer [25]. Such aldolase-catalyzed bi-directional chain elongation (‘‘tandem’’ aldolization) of simple, readily available dialdehydes has been developed into an efficient method for generation of higher-carbon sugars (for example 104, 106, 108) by simple one-pot operations (Figure 5.47) [204, 234]. The furanoid (104) or pyranoid (106) nature of the products can be determined by use of a suitable hydroxyl substitution pattern in a corresponding cyclo-
OH OH NH
5 Enzyme-catalyzed Aldol Additions
242
HO
H N S HO HO
2. P'ase 3. H2/ Pd-C
96
N3
O
1. FucA, DHAP
O S
HO
OH
95
1. FruA, DHAP
OH
H 2. P'ase 3. H2/ Pd-C
N3
1. FruA, DHAP N3 2. P'ase 3. GlcI HO HO
O
Pd/C
PO3
PO3= N3
3P
OH
H2 Pd-C
98
H2 N+
O
56 FruA
H
OH
OH N H
=O =
OH
HO
OH OH
O
97
H2
O N3
OH
HO
H
HO
H HO S N HO HO
OH HO
99
Fig. 5.45
Stereoselective synthesis of 5- and 7membered ring azasugars and of novel azasugar phosphonates.
olefinic precursor (e.g. 103 compared with 105). The overall specific substitution pattern in the carbon-linked disaccharide mimetics is deliberately addressable by the relative hydroxyl configuration and choice of the aldolase. Single diastereomers can be obtained in good overall yield from racemic precursors if the tandem aldolizations are conducted under thermodynamic control (Figure 5.37). The thermodynamic advantage much favors a twofold trans (104) or equatorial connectivity (106), so that a C2 -symmetrical diastereomer 108 is obtained selectively, even from linear rac/meso diol mixtures 107. Similarly, highly complex structures like anulated (109) and spirocyclic (110) carbohydrate mimics can be obtained from appropriately customized precursors (Figure 5.48). In suitable circumstances use of two aldolases that afford distinct selectivity can effect kinetic regioselective discrimination of the independent addition steps, and thus even enable a stereochemical terminus differentiation [204]. DHAP aldolases typically yield carbohydrates or carbohydrate-derived materials, because of the nature of the reactive components, but can also be advantageously used in the construction of stereochemically homogenous fragments of non-carbohydrate natural products. An impressive illustration is the FruA-based chemoenzymatic syntheses of (þ)-exo-brevicomin (111), the aggregation pheromone of the Western pine bark beetle Dendroctonus
5.4 Dihydroxyacetone Phosphate Aldolases
OH
1. FruA, DHAP 2. P'ase
O
OH
OH
OH
O O
OH
H OHCHN
OHCHN
100
OH
OHCHN
101
HO
OH
australine HO 1. O3 2. FruA, DHAP 3. P'ase
OH
H N HO
HO
4. H2/ Pd-C (±)
HO
OH OH
HO
102
OH
N
3-epiaustraline HO
OH O
N3
OH
HO OH
N
OH
OH
H2 / Pd-C
NaCNBH3
HO
243
HO
Fig. 5.46
Synthetic route to oxygenated pyrrolizidine alkaloids, and an aza-C-disaccharide as glycosidase inhibitors.
brevicomis [235]. Addition of DHAP to 5-oxohexanal generated an enantiomerically pure vicinal syn-diol structure containing the only independent stereogenic centers of brevicomin. A complementary inverse approach to 111 (convergent at an intermediate from FruA/propanal) has also been followed using transketolase [236]. Application of an aldolase to the synthesis of the tricyclic microbial elicitor ()-syringolide (Figure 5.50) is another excellent illustration that enzyme-catalyzed aldolizations can be used to generate sufficient quantities of enantiomerically pure material in multi-step syntheses of complex natural and non-natural products [237]. Remarkably, the aldolase reaction established the absolute and relative configuration of the only chiral centers that needed to be externally induced in 113; during the subsequent cyclization all others seemed to follow by kinetic preference. A FruA-mediated stereoselective DHAP addition to a suitable aldehyde precursor 114 (Figure 5.51) served as the key step in the synthesis of the ‘‘non-carbohydrate’’, skipped polyol C9aC16 chain fragment 115 of the macrolide antibiotic pentamycin [238, 239]. Using the same enzyme, compound 117 has been stereoselectively prepared as a synthetic equivalent to the C3aC9 fragment of (þ)-aspicillin, a lichen macrolactone (Figure 5.51) [240].
OH
5 Enzyme-catalyzed Aldol Additions
244
HO
OH (±)
HO
1. O3 2. FruA, DHAP 3. P'ase
O R HO
HO HO
103
HO
OH
104 1. O3 2. FruA, DHAP 3. P'ase
O
HO HO
105
HO
OH CH2
OH R
OH O
1. O3 2. FruA, DHAP 3. P'ase
OH
R
HO
106 OH
OH O
HO HO
n
(±)
OH HO
OH
OH (±)
OH
O HO
R
OH
107
CH2 n
R
OH
O
OH
R
OH
108
Fig. 5.47
Applications of bidirectional chain synthesis to the generation of disaccharide mimetics using tandem enzymatic aldol additions, including racemate resolution under thermodynamic control.
OH OH OHC
(±)
CHO
1. FruA, DHAP 2. P'ase
HO HO HO
OH
O O
109
OH OH OH
OH
single diastereomer
OH
HO
OH
1. O3 2. FruA, DHAP 3. P'ase
HO HO HO
O
O
110
OH OH
Fig. 5.48
Bidirectional chain extension for synthesis of anulated and spirocyclic oligosaccharide mimetics by DHAP aldolase catalysis.
OH OH
5.4 Dihydroxyacetone Phosphate Aldolases
OH
O
O
H
1. P'ase
OPO3=
FruA
O
O
O
2. H+
OH O
OH
+ DHAP
245
O O O
111 1. FruA, DHAP 2. P'ase
O H
O
acetone ZnI2
OH
HO
O HO
OH
O
O
Fig. 5.49
Complementary, inverse approaches for the FruA-based chemoenzymatic synthesis of the insect pheromone (þ)-exo-brevicomin.
O 1. DHAP, FruA H2O/DMF
O MPMO
H
112
CH3(CH2)6
O HO
2. P'ase HO
O
OH
4 steps
O
O
OMPM
OH
O
113
H+ 55% CH3(CH2)6
OH
O
O O
(-)-syringolide HO Fig. 5.50
Aldolase-based creation of independent centers of chirality in a short total synthesis of ()-syringolide, a structurally complex microbial elicitor.
O
246 OBn
MeO
O
HO
9
11 13
HO 15
O
BnO
116
OH
OH
O
115
HO 15 H3C
CH3 OH
pentamycin
OH OH
BnO
O
16
OH
1. FruA DHAP 2. P'ase
OH
OH
14
OH
H
OH
9
13
HO
OMe 16
O
HO
11
C5H11 HO 14
114
OBn
MeO
1. FruA DHAP 2. P'ase
OMe H
5 Enzyme-catalyzed Aldol Additions
O
OH
9
117
OH
O O
3
OH
(+)-aspicillin
Fig. 5.51
Stereoselective generation of synthetic precursors to the macrolide antibiotic pentamycin and the lichen macrolactone (þ)-aspicillin using FruA catalysis.
5.4.6
Aldol Transfer Enzymes
Transaldolase (EC 2.2.1.2) is an enzyme involved in the pentose phosphate pathway where it transfers a dihydroxyacetone unit between several phosphorylated metabolites [29]. The lyase belongs to class I aldolases and has been purified from several sources, cloned, and structurally characterized [41, 42]. In preparative studies yeast transaldolase, which is commercially available, has been shown to accept unphosphorylated aldehydes as the acceptor component [241–243]. The enzyme has also been employed in a multi-enzymatic scheme for conversion of starch into d-fructose; in this scheme transaldolase was used to formally dephosphorylate fructose 6-phosphate by transferring a dihydroxyacetone moiety to d-glyceraldehyde with formation of d-fructose and 34 [244]. The fructose 6-phosphate aldolase (FSA) from E. coli is a novel class I aldolase that catalyzes the reversible formation of fructose 6-phosphate from dihydroxyacetone and d-glyceraldehyde 3-phosphate; it is, therefore, functionally related to transaldolases [245]. Recent determination of the crystal structure of the enzyme showed that it also shares the mechanistic machinery [246]. The enzyme has been shown to accept several aldehydes as acceptor components for preparative synthesis. In addition to dihydroxyacetone it also utilizes hydroxyacetone as an alternative donor to generate 1-deoxysugars, for example 118, regioselectively (Figure 5.52) [247].
5.5 Transketolase and Related Enzymes
OH =
O
O OH
O3PO OH
=
OH
O HO
H
OH
OH OH
D-glyceraldehyde
O
O
HO
OH
OH
D-fructose
O H
34
transaldolase
O
HO
H OH
D-fructose 6-phosphate
HO
O3PO
OH
OH
FSA
+
O
HO OH
OH 1-deoxy-D-xylulose
118
Fig. 5.52
Transaldolase catalysis used for an apparent ‘‘transphosphorylation’’ strategy, as incorporated in a synthesis of fructose from starch, and deoxysugar synthesis by related FSA using a non-natural donor.
5.5
Transketolase and Related Enzymes
Transketolase (EC 2.2.1.1) is involved in the oxidative pentose phosphate pathway in which it catalyzes the reversible transfer of a hydroxyacetyl nucleophile between a variety of sugar phosphates. The enzyme, which requires thiamine diphosphate and divalent Mg as cofactors [248], is commercially available from baker’s yeast and can be readily isolated from many natural or recombinant sources [249, 250]. The yeast enzyme has been structurally well characterized [251], including protein with a carbanion intermediate covalently bound to the cofactor [252]. Large-scale enzyme production has been investigated for the transketolase from Escherichia coli [253–255]. Immobilization was shown to significantly increase stability against inactivation by aldehyde substrates [256]. The enzyme is quite tolerant to organic cosolvent, and preparative reactions have been performed continuously in a membrane reactor [255], with potential in-situ product removal via borate complexation [257]. Enzymes from yeast, spinach, and Escherichia coli have been shown to tolerate a broad substrate spectrum, with the newly formed chiral center always having an absolute (S) configuration as a result of re-face attack [258].
247
5 Enzyme-catalyzed Aldol Additions
248
Tab. 5.6
Substrate tolerance of transketolase. OH
OH
R
cosubstrate
O
R
+
H
R O
OH
Rel. Rate [%]
Yield [%]
Ref.
H CH2 OH CH2 OPO3 ¼ CH2 OCH3 CH2 OCH2 C6 H5 CH2 F CH2 N3 CH2 CN CH2 SH CH2 SCH3 CH2 SCH2 CH3 CH2 CH2 OH CHOHaCH3 CH3 CH2 CH3 CH2 CH2 CH3 C(CH3 )3 CHbCH2 CH2 CHbCH2 (S)-CHOHaCHbCH2 (R)-CHOHaCHbCH2
100 37 – 27 – 47 – – – 33 – <10 35 44 33 22 11 56 28 36 32
70 57 82 76 79 79 71 82 78 – 74 14 50 88 90 78 – 60 90 60 63
236, 262, 302 302 264 260, 261 260 260 196 260 220, 260 261 260 261 303 260–262 260, 261 261 261 261 261 261 261
OH
O H
OH
R
OH R
OH
O
transketolase
H
+
OH
HO2C
O
transketolase RR CO2
D,L-50
119
O
S
OH OH
+
H
R S
OH
O
120
L-50
Fig. 5.53
Kinetic resolution by transketolase, and non-equilibrium CaC bond formation by decomposition of hydroxypyruvate.
Although generic aldehydes are converted with full stereocontrol, and even a,b-unsaturated aldehydes are acceptable to some extent, hydroxylated acceptors are usually converted at higher rates (Table 5.6) [259]. In addition, antipodes of racemic 2-hydroxyaldehydes 50 with a (2R)hydroxyl group are discriminated with complete enantioselectivity; this enables efficient kinetic resolution (Figure 5.53) [260, 261]. Vicinal diols of (3S,4R) configuration are thereby generated with high stereocontrol. This
5.5 Transketolase and Related Enzymes
249
O =
=
O HO
O3PO HO
OH
O3PO
41
FruA OPO3=
OH TPI
42
OH =
TK
O3PO
34
OH =
O
OH
121 CO2
O –
O2C
O
O3PO
OH
119
Fig. 5.54
Multi-enzymatic scheme for stereoselective synthesis of two equivalents of xylulose 5phosphate from fructose 1,6-bisphosphate.
two-carbon chain-elongation method thus provides d-threo products 120 equivalent to those created by the respective three-carbon elongation reaction using FruA (or transaldolase) catalysis. For synthetic purposes hydroxypyruvate 119 can effectively replace the natural donor components [258]. Its covalent activation occurs at a reduced rate of about 4% relative to xylulose 5-phosphate (121) but is accompanied by spontaneous decarboxylation [262]. Thus, loss of carbon dioxide renders synthetic reactions irreversible whereas alternative donors, for example lerythrulose, require coupling to cofactor recycling to shift the overall equilibrium [263]. The thermodynamic driving force from decarboxylation of 119 is particularly useful with equilibrating multi-enzyme systems such as that used in the gram-scale synthesis of two equivalents of 121 from 42 (Figure 5.54) [264]. Transketolase has been used for the key steps in chemoenzymatic syntheses of (þ)-exo-brevicomin 111 from racemic 2-hydroxybutyraldehyde [236], and of the azasugars 1,4-dideoxy-1,4-imino-d-arabinitol [196] or Nhydroxypyrrolidine 124 [265] from 3-azido (95) and 3-O-benzyl (122) derivatives, respectively, of glyceraldehyde (Figure 5.55). Such syntheses were all conducted with intrinsic racemate resolution of 2-hydroxyaldehydes and profited from utilization of 119. Further preparative applications include the synthesis of valuable ketose sugars, particularly fructose analogs [258]. Transketolase has also been used for in-situ generation of erythrose 4phosphate from fructose 6-phosphate in a multi-enzymatic synthesis of DAHP (26; Figure 5.17) [131]. 1-Deoxy-d-xylulose 5-phosphate (125) is an intermediate in the recently discovered non-mevalonate pathway of terpene biosynthesis. This carbohy-
OH
5 Enzyme-catalyzed Aldol Additions
250
OH BnO
122
OH
transketolase H
O OH
BnO
O
123 119
steps
HO
OH OH
OH
N
124
OH
CO2
Fig. 5.55
Synthesis of a novel N-hydroxypyrrolidine on the basis of transketolase catalysis.
OH H2O3PO
DHAP
OH
DXS
CHO
34
OH
125
O CO2H
D-glucose
O
H2O3PO
CO2
NH2 O OH HO O P P O O O
HO HO
O
N
OH
126
HO
O
OH
Fig. 5.56
Preparation of intermediates in the non-mevalonate pathway of terpene biosynthesis.
drate derivative can be efficiently produced from pyruvate and 34 by the catalytic action of the thiamine diphosphate-dependent 1-deoxy-d-xylulose 5phosphate synthase (DXS) that has been cloned from E. coli [266]. The recombinant enzyme from Bacillus subtilis also has recently been applied in multi-enzymatic syntheses of different 13 C- and 14 C-labeled isotopomers of 125 (Figure 5.56) and of labeled 4-diphosphocytidyl-2C-methyl-d-erythritol 126, a metabolic intermediate further downstream of this pathway [267, 268].
5.6
2-Deoxy-D-ribose 5-Phosphate Aldolase
The 2-deoxy-d-ribose 5-phosphate aldolase (RibA or ‘‘DERA’’; EC 4.1.2.4) is a class I enzyme that, in vivo, catalyzes the reversible addition of acetaldehyde to d-glyceraldehyde 3-phosphate (34; Figure 5.57) in the metabolic degradation of 127 from deoxyribonucleosides [269], with an equilibrium constant for synthesis of 2 104 m [56]. It is, therefore, unique among the aldolases in that it uses an aldehyde rather than a ketone as the aldol donor. RibA has been isolated from eukaryotic and prokaryotic sources [270, 271],
5.6 2-Deoxy-D-ribose 5-Phosphate Aldolase
O
OH =
O3PO
CHO
+
H 3C
OH
RibA
H 3C
H OH
O H
+
H3C
H 3C H3C
OH
RibA CH3
CH3
H 3C O H
+
H 3C
128 OH
RibA F
127
O
H3C
H3C
O
O
H2O3PO
H
34 O
251
O
H3C H3C
F
129
Fig. 5.57
Natural aldol reaction catalyzed by RibA, and acceptance of non-natural aldol donors.
and the enzyme from E. coli has been cloned [272] and overexpressed [273]. Spatial enzyme structures at high resolution have been determined for RibA from E. coli, including covalently bound intermediates [274], and from the hyperthermophilic archaea Aeropyrum pernix [275]. Interestingly, the enzyme’s relaxed acceptor specificity enables substitution of both cosubstrates, albeit at strongly reduced rates (< 1% of vmax ). Propionaldehyde, acetone, or fluoroacetone can replace acetaldehyde as the donor in the synthesis of variously substituted 3-hydroxyketones for example 128 or 129 (Figure 5.28) [273, 276]. It is worthy of note that from reactions with propionaldehyde as the donor (which leads to formation of a second stereocenter) only a single diastereomer of absolute (2R,3S) configuration results (for example 131; Figure 5.59) [276]. This is indicative not only of the high level of asymmetric induction at the acceptor carbonyl but also of stereospecific deprotonation of the donor. Aldehydes up to a chain length of four non-hydrogen atoms are tolerated as acceptors (Table 5.7). 2Hydroxyaldehydes 50 are relatively good acceptors, and the d isomers are preferred over the l isomers [276]. Reactions that lead to thermodynamically unfavorable structures can proceed with low stereoselectivity at the reaction center [277]. A single-point mutant aldolase was recently found to be 2.5 times more effective than the wild type in accepting unphosphorylated glyceraldehyde [278]. E. coli RibA has been used in a multi-enzymatic commercial process for production of different purine- or pyrimidine-containing deoxyribonucleosides, for example 130, in good yield (Figure 5.58) [279]. Similarly, 2-deoxyd-ribose, 13 C-labeled at different positions, has been prepared from labeled acetaldehyde and 41 to serve as the precursor to isotopically labeled thymidine [280].
5 Enzyme-catalyzed Aldol Additions
252
Tab. 5.7
Substrate tolerance of deoxy-d-ribose-5-phosphate aldolase. O R
O
OH
RibA R
H
H
ethanal
OH
OH
R
Yield [%]
Rel. Rate [%]
Ref.
CH2 OPO3 ¼ H CH2 OH CH3 CH2 F CH2 Cl CH2 Br CH2 SH CH2 N3 C2 H5 CHbCH2 CHOHaCH2 OH CHN3 aCH2 OH CHOHaCH3 CHOHaCH2 aC6 H5 CH2 SCH2 aCHOHaCH2 OH
78 20 65 32 33 37 30 33 76 18 12 62 46 51 46 27
100 – 0.4 0.4 0.4 0.3 – – 0.3 0.3 – 0.3 – – – –
276 301 276 276 276 276 283 283 276 276 283 276 283 283 283 283
stage 1
DHAP FruA FBP
TPI O O H2O3PO
OH
H H
RibA
stage 2
O
H2O3PO
H OH
OH
34
127 N
adenine
PPM
O
HO
OPO3H2
HO
Pi
N
N
PNP HO
NH2
O
HO
Fig. 5.58
Two-stage aldolase-based technical process for deoxyribonucleoside synthesis.
N
130
5.6 2-Deoxy-D-ribose 5-Phosphate Aldolase
O
O +
H
N3
D-95
N3
O
OH
R
H 3C
H HO
OH
CH3
131
O
O H
D-95
N3
RibA
253
+
N3
RibA
O
OH
NH
HO
H2/ Pd-C
H
OH
HO
HO
Fig. 5.59
Azasugar precursors prepared by RibA catalysis.
O H 3C
OH
RibA H
H 3C
O
RibA
H3C R
H
O H 3C
OH
OH
O H
R
O H
H 3C
H
H3C
O OH
OH
133
Fig. 5.60
RibA-catalyzed sequential aldol addition.
Starting from azidoaldehydes, several azasugars containing a lower density of substituents (for example 132; Figure 5.59) have been prepared by sequential aldolization–hydrogenation [276]. More recently, pyranose synthons have been prepared as key intermediates in the synthesis of epothilones by using RibA catalysis (Chapter 7 in Part I of this book) [281]. When acetaldehyde is used as the only substrate, the initial aldol product can serve again as a suitable acceptor for sequential addition of a second donor molecule to give (3R,5R)-2,4,6-trideoxyhexose 133 (Figure 5.60) [282, 283]. Cyclization to stable hemiacetals masks the free aldehyde and thus effectively precludes formation of higher-order adducts. When the first acceptor is an a-substituted acetaldehyde, related aldol products from twofold donor additions can be prepared that are structurally related to mevinolactone. Combination of a RibA-catalyzed initial addition to other aldolases such as FruA or NeuA in a consecutive addition reaction has also been studied for synthesis of non-natural sugars [277, 282].
132
254
5 Enzyme-catalyzed Aldol Additions
NH2
O
SHMT
+
H
CO2H
H
NH2 CO2H
S
PLP
134
NH2 HO2C
CO2H
OH
OH
135
136
NH2 O
NH2 +
H 3C
H
CO2H
134
ThrA PLP
H 3C R
S
CO2H
NH2 +
H3C S
OH
137
L-Thr
S
CO2H
OH
138
L-allo-Thr
Fig. 5.61
Aldol reactions catalyzed in vivo by serine hydroxymethyl transferase and by threonine aldolases.
5.7
Glycine Aldolases
The metabolism of b-hydroxy-a-amino acids involves pyridoxal phosphatedependent enzymes, classified as serine hydroxymethyltransferase or threonine aldolases, that catalyze reversible aldol-type cleavage to aldehydes and glycine (134) [284]. In vivo serine hydroxymethyltransferases (SHMT; EC 2.1.2.1) catalyze the formation of l-serine 135 from addition of 134 to formaldehyde (Figure 5.61) in the presence of the cofactor tetrahydrofolate. SHMT have been purified and cloned from a large variety of organisms [285]. Eukaryotic enzymes have been shown to accept a range of other aldehydes (Table 5.8) to furnish the corresponding b-hydroxy-a-amino acid adducts [286, 287]. The enzymes are highly selective for the l-configuration but will usually produce diastereomeric mixtures with low erythro/threo selectivity. In preparative reactions excess 134 can compensate for the unfavorable equilibrium constant [56], and economically viable yields of 135 have thus been obtained on a multi-molar scale at high product concentrations [288, 289]. Recombinant rabbit SHMT has been used for highly stereoselective synthesis of l-erythro2-amino-3-hydroxy-1,6-hexanedicarboxylic acid 136 as a potential precursor to carbocyclic b-lactams and nucleosides [290]. Threonine aldolases catalyze the reversible addition of 134 to acetaldehyde to give threonine (137), but the distinction between l-threonine aldolase (ThrA; EC 4.1.2.5) and l-allo-threonine aldolase (EC 4.1.2.6) is vague, because many catalysts have only poor capacity for threo/erythro discrimination (137/138; Figure 5.61) [284, 291, 292]. In fact, both l- and d-selective enzymes have been purified and cloned from a variety of organisms [284]. The first stereospecific l-allo-threonine aldolase from Aeromonas jandaei has recently been cloned and characterized [293]. X-ray structures of Thermotoga
5.7 Glycine Aldolases
255
Tab. 5.8
Substrate tolerance of threonine-dependent aldolases. NH2
NH2 O R
R
H CH3 C3 H9 C5 H11 CH(CH3 )2 CH2 OBn CH2 CH2 OBn (CH2 )2 C6 H5 C6 H5 p-C6 H4 NO2 o-C6 H4 NO2 m-C6 H4 OH p-C6 H4 CH3 2-imidazolyl 2-furanyl 2-thienyl
aldolase H
R
serine
SHMT
CO2H OH
Yield [%]
– 2:98
94 –
60:40
25
60:40
22
33:67 50:50 56:44
10 20 11
CO2H OH
L-ThrA
Selectivity (threo:erythro)
+
R
D-ThrA
Ref.
Selectivity (threo:erythro)
Yield [%]
Selectivity (threo:erythro)
Yield [%]
9:91 24:76 37:63 46:53 2:98 47:53 28:72 60:40 47:53 58:42 73:27 55:45 66:34
40 21 16 15 88 53 10 9 53 93 43 17 40
53:47 67:33 61:39 84:16
60 37 31 26
87:13 74:26 55:45 72:28 74:26 43:57 61:39
16 11 88 89 54 25 60
288, 289 292 292 287, 292 292 297 297 292 287, 292 292 292 292 292 287, 292 287 287
maritima ThrA as apoenzyme and in complex with substrate and product have recently been determined [294]. Many ThrA enzymes have broad substrate tolerance for the aldehyde acceptor, notably including variously substituted aliphatic and aromatic aldehydes (Figure 5.63); however, a,b-unsaturated aldehydes are not accepted [291]. The erythro-selective l-threonine aldolase from the yeast Candida humicola has been used to catalyze the addition of 134 to d-glyceraldehyde acetonide 139 (Figure 5.62) [295]. The diastereomeric products 140 and 141, formed in a 1:2 ratio, were separated and further processed to furnish (S,S,R)- and (S,S,S)-3,4-dihydroxyprolines 143 and 144. The same enzyme has also been applied to the synthesis of nucleobase-modified amino acids of type 142 [296], and of compound 146 as an intermediate en route to the immunosuppressive lipid mycestericin D [297]. For the latter, benzyl protection of the acceptor (145) was found to increase the stereoselectivity, and the erythro product was obtained preferentially under kinetic control at low conversion. With benzyloxyacetaldehyde a cloned ThrA from E. coli resulted in higher diastereoselectivity than other enzymes under conditions of kinetic control; this was applied in the synthesis of novel sialyl Lewis x mimetics [298].
5 Enzyme-catalyzed Aldol Additions
256
OH CHO
ThrA
O O
O O
glycine
OH CO2H
NH2
139
CO2H
O
+
O
NH2
140
141
steps
steps
OH HO
CO2H N
N
N
N
NH2
OH
N H
142
HO
CO2H
OH
N H
143
CO2H
144
NH2 O H2N
134
+ CO2H
OBn
H
ThrA
OH OBn
H2N
PLP
CO2H
145
146
OH C6H13
H 2N HOH2C CO2H
mycestericin D
O
Fig. 5.62
Application of ThrA catalysis for stereoselective synthesis of dihydroxyprolines from glyceraldehyde, of an adenylamino acid in preparation of RNA mimics, and of a potential precursor to the immunosuppressive lipid mycestericin D.
More suitably, the specificity of ThrA enzymes can be used for kinetic resolution of diastereomer mixtures such as those produced by chemical synthesis (Figure 5.63). This is particularly promising for aryl analogs of threonine that are of interest as building blocks of pharmaceuticals, including vancomycin antibiotics. Thus, an l-ThrA from Streptomyces amakusaensis has been shown to be particularly useful for resolution of racemic threo-aryl serines 147 by retroaldolization under kinetic control to furnish enantiomerically pure d amino acids [290, 292, 299]. As a complementary example, the recombinant low-specificity d-ThrA from Alcaligenes xyloxidans has been used for resolution of DL-threo-b-(3,4-methylenedioxyphenyl)serine 148 by retro-aldol cleavage to furnish the desired l-threo isomer with a molar yield of 50% and almost 100% ee [300]. The latter compound serves as a synthetic intermediate en route to a parkinsonism drug.
5.8 Recent Developments
OH
OH CO2H
NH2
X
R
L-ThrA
S
CO2H
X
134 OH
CO2H NH2
O
NH2
+
D-threo-147
OH O
+
NH2
X
DL-threo-147
CHO
CO2H
257
DL-threo-148
D-ThrA
CO2H
O
NH2
O
+
piperonal + glycine
L-threo-148
Fig. 5.63
Resolution of diastereomer mixtures by retro-aldolization under kinetic control for preparation of enantiomerically pure phenylserines, and racemate resolution process for a synthetic intermediate of an antiparkinsonism drug.
5.8
Recent Developments
As a result of a recent almost explosive increase in knowledge of the structures of all important classes of aldolases, including their liganded complexes, detailed understanding of substrate recognition and catalytic machinery for stereospecific carbon–carbon bond formation is advancing rapidly (Section 5.2.2). This, with progress fueled by whole-genome sequencing, means the enzymes are now amenable to rational engineering or directed molecular evolution toward improved physical properties and catalytic performance. Tailoring of enzyme properties such as improved activity and stability has been amply demonstrated to be feasible on demand [304, 305], and improved substrate tolerance and optimized stereoselectivity for asymmetric syntheses are immediate targets [306]. For identification of suitable mutant aldolases from engineering or evolutionary approaches, efficient assay techniques have been developed for identification of target catalysts in high-throughput mode based on chromogenic or fluorogenic substrates [307–309]. The same is true in the search for novel enzymes with interesting synthetic capabilities from mass screening of natural or manmade biodiversity [310]. Most recently, first attempts to redesign individual aldolase enzymes for an altered substrate spectrum have been reported [143, 144, 278], including a first example of modification of the stereospecificity of carbon–carbon bond creation by directed evolution [311]. Together with knowledge gained from the mechanistic profiles of catalytic antibodies as a complementary approach toward novel stereoselective aldolase biocatalysts (Chapter 6 in Part I of this book), such endeavors will probably also be instrumental in enabling better generic understanding of the mechanis-
258
5 Enzyme-catalyzed Aldol Additions
tic subtleties operating in the initiation and stereoelectronic steering of enzyme-catalyzed aldol reactions. Consequently, it is probable that current restrictions resulting from narrow donor specificity will soon be eliminated. In addition to the major types of aldolases discussed above, several biosynthetically important enzymes promote aldol-related Claisen additions of acyl thioesters of coenzyme A (CoA) to ketones, often to a-oxoacids. This includes some of the key enzymes in central metabolism such as the citric acid cycle, and many others involved in the biosynthesis of fatty acids, steroids, terpenoids, macrolides and other secondary metabolites [14, 15]. Members of this class of CaC bond-forming enzymes are certainly attractive for asymmetric synthesis, because the equilibrium constants profit from a high driving force by ensuing thioester hydrolysis. High expense and limited CoA cofactor stability have so far precluded broader synthetic evaluation, but the technique might be more practical now that several costefficient in-situ cofactor recycling schemes for acyl-CoA substrates have been developed [312–316]. Particular progress is also advancing in the field of polyketides, a class of structurally diverse natural products with a broad range of biological activity. Polyketide biosynthesis is based on a fully modular scheme that involves distinct protein domains with ketosynthase (Claisen aldolization), or functional group processing activity, which iteratively build up the carbon backbone and an individually patterned polyketide structure. By choosing from known gene clusters of different polyketides from different microorganisms and plants that code for specific catalytic domains, new interspecies gene constructs can be assembled in a combinatorial fashion; this enables exploration of the feasibility of engineered biosynthesis of novel, non-natural polyketides with potentially useful bioactivity [317–320].
5.9
Summary and Conclusion
Progress in the synthetic use of aldol-active enzymes as efficient and highly stereoselective catalysts has been remarkable. Biocatalytic CaC bond formation is eminently useful for asymmetric synthesis of complex multifunctional molecules. Process design and development, however, requires an intimate knowledge base covering subjects such as substrate tolerance for donor and acceptor components or the influence of substrate structure on enantio- and diastereoselectivity of CaC bonding. This overview demonstrates that many enzymes for carbon–carbon bond formation are now readily available and predictably useful for synthetic applications. Clearly, such enzymes bear significant potential for application in asymmetric synthesis, particularly with regard to polyfunctionalized natural products and other biologically relevant classes of compounds. It is also evident that the technology is now well accepted in the chemical community as a powerful
Examples of Experimental Procedures
supplement to existing methodology of organic synthesis. Indeed, with the first processes already at the state of industrial commercialization on a large scale, enzymatic aldol reactions are maturing rapidly. The scope of potential applications is broadening on all frontiers with increasing complexity of target structures. Limitations inherent in the properties of enzymes are appreciated and approaches are developed to resolve them. Hopefully, this compilation of the potential scope of the technique and its limitations will help to identify, and aid in the successful development of, future synthetic applications.
Examples of Experimental Procedures General
Dihydroxyacetone phosphate (41) was prepared enzymatically from glycerol 1-phosphate (74) by the action of glycerol phosphate oxidase [177]. Analytical thin-layer chromatography was performed on silica gel plates using a 1:1 mixture of sat. ammonia–ethanol for development, and anisaldehyde stain for detection. The aldolases are commercially available or can be purified in accordance with published procedures [150]. Activity of aldolases (1 unit catalyzes cleavage of 1 mmol l-ketose 1-phosphates (43/45) per minute at 25 C [150]) and amounts of 41 were determined photometrically by an assay coupled with glycerol phosphate dehydrogenase-catalyzed NADH oxidation [149]. L-Fructose 1-Phosphate from L-Glyceraldehyde by in-situ Formation of DHAP. GPO (70 U), catalase (1000 U), and RhuA (50 U) was added to a solution of l-glycerol 3-phosphate (74, 1.0 mmol) and l-glyceraldehyde (110 mg, 1.2 mmol) in 10 mL oxygen-saturated water at pH 6.8. The mixture was shaken at 20 C under an oxygen atmosphere at 100 rpm. Conversion was monitored by enzymatic assay for equivalents of 41 produced, and by 1 H and 31 P NMR spectroscopy. After complete conversion and filtration through charcoal the pH was adjusted to 7.5 by addition of 1.0 m cyclohexylamine in ethanol and the solution was concentrated to dryness by rotary evaporation at a20 C in vacuo. The solid residue was dissolved in 0.5 mL water and the resulting solution was filtered. Dry ethanol (2.5 mL) was added, then dry acetone until faint turbidity remained. Crystallization at 4 C furnished l-fructose 1-phosphate bis(cyclohexylammonium) salt as colorless needles; yield 370 mg (85%). L-Fuculose 1-Phosphate from DL-Lactaldehyde by Racemate Resolution [171]. Racemic lactaldehyde dimethylacetal (6.0 g, 50 mmol) in 50 mL water was hydrolyzed by treatment with cation-exchange resin (Dowex AG50W-X8, Hþ form) at 60 C for 8 h. After filtration, an aqueous solution
259
260
5 Enzyme-catalyzed Aldol Additions
of 41 (80 mL, 10 mmol; prepared by GPO oxidation of 74 as above) was added. The mixture was adjusted to pH 6.8 with 1 m NaOH and incubated with FucA (300 U) at room temperature. After complete conversion of 41, as determined by TLC (RF (41) ¼ 0.39, RF (45) ¼ 0.30) and enzymatic assay, the mixture was filtered through charcoal and passed through an anionexchange column (Dowex AG1-X8, HCO3 form, 100 mL). The column was washed with water (200 mL), and the product was eluted with 0.2 m triethylammonium hydrogen carbonate buffer. Repeated concentration from water (3 50 mL), ion exchange to the free acid (Dowex AG50W-X8, Hþ form, 100 mL), neutralization with cyclohexylamine, then crystallization from 90% aqueous ethanol provided the colorless bis(cyclohexylammonium) salt of 45 (3.76 g, 85%).
References 1 H. G. Davies, R. H. Green, D. R. Kelly, S. M. Roberts,
2 3 4 5 6 7 8
9 10 11 12 13 14
15 16
Biotransformations in Preparative Organic Chemistry, Academic Press, London 1989. W. Gerhartz, Enzymes in Industry: Production and Applications, VCH, Weinheim 1991. J. Halgas, Biocatalysts in Organic Synthesis, Elsevier, Amsterdam 1992. L. Poppe, L. Nova´k, Selective Biocatalysis. A Synthetic Approach, VCH, Weinheim 1992. C.-H. Wong, G. M. Whitesides, Enzymes in Synthetic Organic Chemistry, Pergamon, Oxford 1994. M. Sinnott, Comprehensive Biological Catalysis, Academic Press, San Diego 1998. W.-D. Fessner, Biocatalysis – From Discovery to Application (Top. Curr. Chem., Vol. 200), Springer, Heidelberg 1998. U. Bornscheuer, R. Kazlauskas, Hydrolases in Organic Synthesis – Regio- and Stereoselective Biotransformations, Wiley– VCH, Weinheim 1999. K. Faber, Biotransformations in Organic Chemistry, 4th Ed., Springer, Heidelberg 2000. A. Liese, K. Seelbach, C. Wandrey, Industrial Biotransformations, Wiley–VCH, Weinheim 2000. K. Drauz, H. Waldmann, Enzyme Catalysis in Organic Synthesis, 2nd Ed., Wiley–VCH, Weinheim 2002. T. D. Machajewski, C.-H. Wong, Angew. Chem. Int. Ed. 2000, 39, 1352–1374. H. Waldmann, D. Sebastian, Chem. Rev. 1994, 94, 911–937. D. F. Henderson, E. J. Toone, in Comprehensive Natural Product Chemistry, Vol. 3 (Ed.: B. M. Pinto), Elsevier Science, Amsterdam 1999, p. 367–440. D. Schomburg, M. Salzmann, Enzyme Handbook, Springer, Berlin 1990–1995. V. Schellenberger, H. D. Jakubke, Angew. Chem. Int. Ed. Engl. 1991, 30, 1437–1449.
References 17 D. Rozzell, F. Wagner, Biocatalytic Production of Amino Acids
and Derivatives, Hanser, Munich 1992. 18 E. J. Toone, E. S. Simon, M. D. Bednarski, G. M.
Whitesides, Tetrahedron 1989, 45, 5365–5422. 19 S. David, C. Auge´, C. Gautheron, Adv. Carbohydr. Chem.
Biochem. 1991, 49, 175–237. 20 H. J. M. Gijsen, L. Qiao, W. Fitz, C.-H. Wong, Chem. Rev.
1996, 96, 443–473. 21 G. M. Watt, P. A. Lowden, S. L. Flitsch, Curr. Opin. Struct.
Biol. 1997, 7, 652–660. 22 S. Takayama, G. J. McGarvey, C.-H. Wong, Ann. Rev.
Microbiol. 1997, 51, 285–310. 23 N. Wymer, E. J. Toone, Curr Opin Chem Biol 2000, 4, 110–
119. 24 W.-D. Fessner, V. Helaine, Curr Opin. Biotechnol. 2001, 12,
574–586. 25 W.-D. Fessner, C. Walter, Top. Curr. Chem. 1996, 184, 97–
194. 26 W.-D. Fessner, in Microbial Reagents in Organic Synthesis, Vol.
27 28 29
30 31 32
33 34
35
36 37 38 39 40 41
381 (Ed.: S. Servi), Kluwer Academic Publishers, Dordrecht, 1992, pp. 43–55. R. Kluger, Chem. Rev. 1990, 90, 1151–1169. E. C. Webb, Enzyme Nomenclature, Academic Press, San Diego 1992. B. L. Horecker, O. Tsolas, C. Y. Lai, in The Enzymes, Vol. VII (Ed.: P. D. Boyer), Academic Press, New York, 1972, pp. 213–258. G. Trombetta, G. Balboni, A. di Iasio, E. Grazi, Biochem. Biophys. Res. Commun. 1977, 74, 1297–1301. D. J. Kuo, I. A. Rose, Biochemistry 1985, 24, 3947–3952. W.-D. Fessner, A. Schneider, H. Held, G. Sinerius, C. Walter, M. Hixon, J. V. Schloss, Angew. Chem. Int. Ed. Engl. 1996, 35, 2219–2221. J. Sygusch, D. Beaudry, M. Allaire, Proc. Natl. Acad. Sci. USA 1987, 84, 7846–7850. S. J. Gamblin, G. J. Davies, J. M. Grimes, R. M. Jackson, J. A. Littlechild, H. C. Watson, J. Mol. Biol. 1991, 219, 573– 576. G. Hester, O. Brenner-Holzach, F. A. Rossi, M. StruckDonatz, K. H. Winterhalter, J. D. G. Smit, K. Piontek, FEBS Lett. 1991, 292, 237–242. H. Kim, U. Certa, H. Dobeli, P. Jakob, W. G. J. Hol, Biochemistry 1998, 37, 4388–4396. A. R. Dalby, D. R. Tolan, J. A. Littlechild, Acta Cryst. 2001, D 57, 1526–1533. N. Blom, J. Sygusch, Nature Struct. Biol. 1997, 4, 36–39. K. H. Choi, J. Shi, C. E. Hopkins, D. R. Tolan, K. N. Allen, Biochemistry 2001, 40, 13868–13875. A. Maurady, A. Zdanov, D. de Moissac, D. Beaudry, J. Sygusch, J. Biol. Chem. 2002, 277, 9474–9483. J. Jia, W. J. Huang, U. Scho¨rken, H. Sahm, G. A. Sprenger, Y. Lindqvist, G. Schneider, Structure 1996, 4, 715–724.
261
262
5 Enzyme-catalyzed Aldol Additions ¨ rken, Y. Lindqvist, G. A. Sprenger, G. 42 J. Jia, U. Scho Schneider, Protein Sci. 1997, 6, 119–124. 43 T. Izard, M. C. Lawrence, R. L. Malby, G. G. Lilley, P. M.
Colman, Structure 1994, 2, 361–369. 44 M. C. Lawrence, J. A. R. G. Barbosa, B. J. Smith, N. E.
45
46 47 48 49 50 51 52
53 54 55 56 57 58 59 60
61 62 63 64 65 66 67
Hall, P. A. Pilling, H. C. Ooi, S. M. Marcuccio, J. Mol. Biol. 1997, 266, 381–399. J. A. Barbosa, B. J. Smith, R. DeGori, H. C. Ooi, S. M. Marcuccio, E. M. Campi, W. R. Jackson, R. Brossmer, M. Sommer, M. C. Lawrence, J Mol Biol 2000, 303, 405–421. J. Allard, P. Grochulski, J. Sygusch, Proc. Natl. Acad. Sci. USA 2001, 98, 3679–3684. M. K. Dreyer, G. E. Schulz, J. Mol. Biol. 1996, 259, 458–466. M. K. Dreyer, G. E. Schulz, J. Mol. Biol. 1993, 231, 549–553. M. Kroemer, G. E. Schulz, Acta Cryst. 2002, D 58, 824–832. A. C. Joerger, C. Gosse, W.-D. Fessner, G. E. Schulz, Biochemistry 2000, 39, 6033–6041. N. S. Blom, S. Tetreault, R. Coulombe, J. Sygusch, Nature Struct. Biol. 1996, 3, 856–862. S. J. Cooper, G. A. Leonard, S. M. McSweeney, A. W. Thompson, J. H. Naismith, S. Qamar, A. Plater, A. Berry, W. N. Hunter, Structure 1996, 4, 1303–1315. S. M. Zgiby, G. J. Thomson, S. Qamar, A. Berry, Eur. J. Biochem. 2000, 267, 1858–1869. D. R. Hall, C. S. Bond, G. A. Leonard, C. I. Watt, A. Berry, W. N. Hunter, J. Biol. Chem. 2002, 277, 22018–22024. D. R. Hall, L. E. Kemp, G. A. Leonard, K. Marshall, A. Berry, W. N. Hunter, Acta Cryst. 2003, D 59, 611–614. R. N. Goldberg, Y. B. Tewari, J. Phys. Chem. Ref. Data 1995, 24, 1669–1698. A. Pollak, H. Blumenfeld, M. Wax, R. L. Baughn, G. M. Whitesides, J. Am. Chem. Soc. 1980, 102, 6324–6336. B. Bossow, W. Berke, C. Wandrey, BioEngineering 1992, 8, 12–19. S. B. Sobolov, A. Bartoszkomalik, T. R. Oeschger, M. M. Montelbano, Tetrahedron Lett. 1994, 35, 7751–7754. U. Kragl, U. Niedermeyer, M.-R. Kula, C. Wandrey, in Ann. N. Y. Acad. Sci., Vol. 613 (Eds.: H. Okada, A. Tanaka, H. W. Blanch), The New York Academy of Sciences, New York, 1990, pp. 167–175. U. Kragl, D. Gygax, O. Ghisalba, C. Wandrey, Angew. Chem. Int. Ed. Engl. 1991, 30, 827–828. U. Kragl, A. Go¨dde, C. Wandrey, N. Lubin, C. Auge´, J. Chem. Soc. Perkin Trans. I 1994, 119–124. L. Espelt, P. Clapes, J. Esquena, A. Manich, C. Solans, Langmuir 2003, 19, 1337–1346. W.-D. Fessner, M. Knorst, DE 10034586, 2002; Chem. Abstr. 136:166160. Y. Ohta, M. Shimosaka, K. Murata, Y. Tsukada, A. Kimura, Appl. Microbiol. Biotechnol. 1986, 24, 386–391. K. Aisaka, S. Tamura, Y. Arai, T. Uwajima, Biotechnol. Lett. 1987, 9, 633–637. K. Yamamoto, B. Kawakami, Y. Kawamura, K. Kawai, Anal. Biochem. 1997, 246, 171–175.
References 68 M. J. Kim, W. J. Hennen, H. M. Sweers, C.-H. Wong, J. Am.
Chem. Soc. 1988, 110, 6481–6486. 69 C. Auge´, S. David, C. Gautheron, Tetrahedron Lett. 1984, 25,
4663–4664. 70 C. Auge´, S. David, C. Gautheron, A. Veyrie`res, Tetrahedron
Lett. 1985, 26, 2439–2440. 71 C. Auge´, C. Gautheron, J. Chem. Soc. Chem. Commun. 1987,
859–860. 72 C. Auge´, S. David, C. Gautheron, A. Malleron, B. Cavaye´,
New. J. Chem. 1988, 12, 733–744. 73 M. D. Bednarski, H. K. Chenault, E. S. Simon, G. M.
Whitesides, J. Am. Chem. Soc. 1987, 109, 1283–1285. 74 E. S. Simon, M. D. Bednarski, G. M. Whitesides, J. Am.
Chem. Soc. 1988, 110, 7159–7163. 75 T. Sugai, A. Kuboki, S. Hiramatsu, H. Okazaki, H. Ohta,
Bull. Chem. Soc. Jpn. 1995, 68, 3581–3589. 76 M. Mahmoudian, D. Noble, C. S. Drake, R. F. Middleton,
77 78 79 80 81 82
83 84 85
86 87 88 89 90
91 92
D. S. Montgomery, J. E. Piercey, D. Ramlakhan, M. Todd, M. J. Dawson, Enzyme Microb. Technol. 1997, 20, 393–400. S. Blayer, J. M. Woodley, M. D. Lilly, M. J. Dawson, Biotechnol. Prog. 1996, 12, 758–763. I. Maru, J. Ohnishi, Y. Ohta, Y. Tsukada, Carbohydrate Res. 1998, 306, 575–578. C. H. Lin, T. Sugai, R. L. Halcomb, Y. Ichikawa, C.-H. Wong, J. Am. Chem. Soc. 1992, 114, 10138–10145. Y. Ichikawa, J. L. C. Liu, G. J. Shen, C.-H. Wong, J. Am. Chem. Soc. 1991, 113, 6300–6302. O. Blixt, J. C. Paulson, Adv. Synth. Catal. 2003, 345, 687– 690. J. Beliczey, U. Kragl, A. Liese, C. Wandrey, K. Hamacher, H. H. Coenen, T. Tierling, US 6355453, 2002; Chem. Abstr. 136:231340. W. Fitz, J. R. Schwark, C.-H. Wong, J. Org. Chem. 1995, 60, 3663–3670. C. Auge´, B. Bouxom, B. Cavaye´, C. Gautheron, Tetrahedron Lett. 1989, 30, 2217–2220. J. L. C. Liu, G. J. Shen, Y. Ichikawa, J. F. Rutan, G. Zapata, W. F. Vann, C.-H. Wong, J. Am. Chem. Soc. 1992, 114, 3901– 3910. C. Salagnad, A. Godde, B. Ernst, U. Kragl, Biotechnol. Prog. 1997, 13, 810–813. R. J. Lins, S. L. Flitsch, N. J. Turner, E. Irving, S. A. Brown, Angew. Chem. Int. Ed. 2002, 41, 3405–3407. W.-Y. Wu, B. Jin, D. C. M. Kong, M. von Itzstein, Carbohydrate Res. 1997, 300, 171–174. A. Kuboki, H. Okazaki, T. Sugai, H. Ohta, Tetrahedron 1997, 53, 2387–2400. A. J. Humphrey, C. Fremann, P. Critchley, Y. Malykh, R. Schauer, T. D. H. Bugg, Bioorg. Med. Chem. 2002, 10, 3175– 3185. C.-C. Lin, C.-H. Lin, C.-H. Wong, Tetrahedron Lett. 1997, 38, 2649–2652. M. Murakami, K. Ikeda, K. Achiwa, Carbohydrate Res. 1996, 280, 101–110.
263
264
5 Enzyme-catalyzed Aldol Additions 93 D. C. M. Kong, M. Vonitzstein, Carbohydrate Res. 1997, 305,
323–329. 94 M. J. Kiefel, J. C. Wilson, S. Bennett, M. Gredley, M. von
Itzstein, Bioorg. Med. Chem. 2000, 8, 657–664. 95 M. A. Sparks, K. W. Williams, C. Lukacs, A. Schrell, G.
96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121
Priebe, A. Spaltenstein, G. M. Whitesides, Tetrahedron 1993, 49, 1–12. P. Z. Zhou, H. M. Salleh, J. F. Honek, J. Org. Chem. 1993, 58, 264–266. W. Fitz, C.-H. Wong, J. Org. Chem. 1994, 59, 8279–8280. G. B. Kok, M. Campbell, B. L. Mackey, M. von Itzstein, Carbohydr. Res. 2001, 332, 133–139. S. David, A. Malleron, B. Cavaye, New J. Chem 1992, 16, 751–755. C. Auge´, C. Gautheron, S. David, A. Malleron, B. Cavaye´, B. Bouxom, Tetrahedron 1990, 46, 201–214. T. Sugai, G. J. Shen, Y. Ichikawa, C.-H. Wong, J. Am. Chem. Soc. 1993, 115, 413–421. S. Ladisch, A. Hasegawa, R. X. Li, M. Kiso, Biochemistry 1995, 34, 1197–1202. K. Koppert, R. Brossmer, Tetrahedron Lett. 1992, 33, 8031– 8034. A. Malleron, S. David, New J. Chem. 1996, 20, 153–159. T. Miyazaki, H. Sato, T. Sakakibara, Y. Kajihara, J. Am. Chem. Soc. 2000, 122, 5678–5694. L. K. Mahal, K. J. Yarema, C. R. Bertozzi, Science 1997, 276, 1125–1128. K. J. Yarema, L. K. Mahal, R. E. Bruehl, E. C. Rodriguez, C. R. Bertozzi, J. Biol. Chem. 1998, 273, 31168–31179. C. R. H. Raetz, J. Bacteriol. 1993, 175, 5745–5753. F. M. Unger, Adv. Carbohydr. Chem. Biochem. 1981, 38, 323– 388. B. R. Knappmann, M. R. Kula, Appl. Microbiol. Biotechnol. 1990, 33, 324–329. M. A. Ghalambor, E. C. Heath, J. Biol. Chem. 1966, 241, 3222–3227. P. R. Srinivasan, D. B. Sprinson, J. Biol. Chem. 1959, 234, 716–722. J. Hurwitz, A. Weissbach, J. Biol. Chem. 1959, 234, 710–712. P. H. Ray, J. Bacteriol. 1980, 141, 635–644. F. Stuart, I. S. Hunter, Biochim. Biophys. Acta 1993, 1161, 209–215. J. M. Ray, R. Bauerle, J. Bacteriol. 1991, 173, 1894–1901. L. M. Weaver, J. E. B. P. Pinto, K. M. Herrmann, Bioorg. Med. Chem. Lett. 1993, 3, 1421–1428. I. A. Shumilin, C. Zhao, R. Bauerle, R. H. Kretsinger, J. Mol. Biol. 2002, 320, 1147–1156. R. L. Doong, J. E. Gander, R. J. Ganson, R. A. Jensen, Physiol. Plant. 1992, 84, 351–360. L. M. Reimer, D. L. Conley, D. L. Pompliano, J. W. Frost, J. Am. Chem. Soc. 1986, 108, 8010–8015. K. M. Draths, J. W. Frost, J. Am. Chem. Soc. 1990, 112, 1657–1659.
References 122 K. M. Draths, T. L. Ward, J. W. Frost, J. Am. Chem. Soc.
1992, 114, 9725–9726. 123 D. R. Knop, K. M. Draths, S. S. Chandran, J. L. Barker, R.
124 125 126 127 128 129 130 131 132
133 134 135
136 137 138 139 140
141
142 143 144
145
von Daeniken, W. Weber, J. W. Frost, J. Am. Chem. Soc. 2001, 123, 10173–10182. K. M. Draths, J. W. Frost, J. Am. Chem. Soc. 1995, 117, 2395–2400. J. L. Barker, J. W. Frost, Biotechnol. Bioeng. 2001, 76, 376– 390. N. Ran, D. R. Knop, K. M. Draths, J. W. Frost, J. Am. Chem. Soc. 2001, 123, 10927–10934. A. K. Sundaram, R. W. Woodard, J Org Chem 2000, 65, 5891–5897. W. A. Wood, in The Enzymes, 3rd Ed, Vol. 7 (Eds.: P. D. Boyer), Academic, New York, 1972, pp. 281–302. R. H. Hammerstedt, H. Mo¨hler, K. A. Decker, D. Ersfeld, W. A. Wood, Methods Enzymol. 1975, 42, 258–264. R. K. Scopes, Anal. Biochem. 1984, 136, 525–529. M. C. Shelton, E. J. Toone, Tetrahedron Asymmetry 1995, 6, 207–211. T. Conway, R. Fliege, D. Jones-Kilpatrick, J. Liu, W. O. Barnell, S. E. Egan, Mol. Microbiol. 1991, 5, 2901– 2911. A. T. Carter, B. M. Pearson, J. R. Dickinson, W. E. Lancashire, Gene 1993, 130, 155–156. N. Hugouvieux-Cotte-Pattat, J. Robert-Baudouy, Mol. Microbiol. 1994, 11, 67–75. J. S. Griffiths, N. J. Wymer, E. Njolito, S. Niranjanakumari, C. A. Fierke, E. J. Toone, Bioorg. Med. Chem. 2002, 10, 545–550. S. E. Egan, R. Fliege, S. Tong, A. Shibata, R. E. Wolf, T. Conway, J. Bacteriol. 1992, 174, 4638–4646. T. S. M. Taha, T. L. Deits, Biochem. Biophys. Res. Commun. 1994, 200, 459–466. N. C. Floyd, M. H. Liebster, N. J. Turner, J. Chem. Soc. Perkin Trans. I 1992, 1085–1086. S. T. Allen, G. R. Heintzelman, E. J. Toone, J. Org. Chem. 1992, 57, 426–427. M. C. Shelton, I. C. Cotterill, S. T. A. Novak, R. M. Poonawala, S. Sudarshan, E. J. Toone, J. Am. Chem. Soc. 1996, 118, 2117–2125. I. C. Cotterill, M. C. Shelton, D. E. W. Machemer, D. P. Henderson, E. J. Toone, J. Chem. Soc. Perkin Trans. 1 1998, 1335–1341. D. P. Henderson, M. C. Shelton, I. C. Cotterill, E. J. Toone, J. Org. Chem. 1997, 62, 7910–7911. S. Fong, T. D. Machajewski, C. C. Mak, C.-H. Wong, Chem Biol 2000, 7, 873–883. N. Wymer, L. V. Buchanan, D. Henderson, N. Mehta, C. H. Botting, L. Pocivavsek, C. A. Fierke, E. J. Toone, J. H. Naismith, Structure 2001, 9, 1–10. H. P. Meloche, E. L. O’Connell, Methods Enzymol 1982, 90, 263–269.
265
266
5 Enzyme-catalyzed Aldol Additions 146 A. M. Elshafei, O. M. Abdel-Fatah, AFS, Adv. Food Sci.
2002, 24, 30–36. 147 D. P. Henderson, I. C. Cotterill, M. C. Shelton, E. J.
Toone, J. Org. Chem. 1998, 63, 906–907. 148 W.-D. Fessner, G. Sinerius, Bioorg. Med. Chem. 1994, 2, 639–
645. 149 M. D. Bednarski, E. S. Simon, N. Bischofberger, W.-D.
150
151
152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172
Fessner, M. J. Kim, W. Lees, T. Saito, H. Waldmann, G. M. Whitesides, J. Am. Chem. Soc. 1989, 111, 627–635. W.-D. Fessner, G. Sinerius, A. Schneider, M. Dreyer, G. E. Schulz, J. Badia, J. Aguilar, Angew. Chem. Int. Ed. Engl. 1991, 30, 555–558. C. H. von der Osten, A. J. Sinskey, C. F. Barbas, R. L. Pederson, Y. F. Wang, C.-H. Wong, J. Am. Chem. Soc. 1989, 111, 3924–3927. M. T. Zannetti, C. Walter, M. Knorst, W.-D. Fessner, Chemistry Eur. J. 1999, 5, 1882–1890. C. de Montigny, J. Sygusch, Eur. J. Biochem. 1996, 241, 243– 248. F. Go¨tz, S. Fischer, K.-H. Schleifer, Eur. J. Biochem. 1980, 108, 295–301. W. J. Lees, G. M. Whitesides, J. Org. Chem. 1993, 58, 1887– 1894. A. Straub, F. Effenberger, P. Fischer, J. Org. Chem. 1990, 55, 3926–3932. D. L. Bissett, R. L. Anderson, J. Biol. Chem. 1980, 255, 8750– 8755. W.-D. Fessner, O. Eyrisch, Angew. Chem. Int Ed. Engl. 1992, 31, 56–58. O. Eyrisch, G. Sinerius, W.-D. Fessner, Carbohydrate Res. 1993, 238, 287–306. E. Garcia-Junceda, G. J. Shen, T. Sugai, C.-H. Wong, Bioorg Med Chem 1995, 3, 945–953. A. Brinkkotter, A. Shakeri Garakani, J. W. Lengeler, Arch. Microbiol. 2002, 177, 410–419. G. J. Williams, S. Domann, A. Nelson, A. Berry, Proc. Natl. Acad. Sci. USA 2003, 100, 3143–3148. Y. Takagi, Methods Enzymol. 1966, 9, 542–545. T. H. Chiu, K. L. Evans, D. S. Feingold, Methods Enzymol 1975, 42, 264–269. M. A. Ghalambor, E. C. Heath, Methods Enzymol. 1966, 9, 538–542. P. Moralejo, S. M. Egan, E. Hidalgo, J. Aguilar, J. Bacteriol 1993, 175, 5585–5594. J. Nishitani, G. Wilcox, Gene 1991, 105, 37–42. Z. Lu, E. C. C. Lin, Nucleic Acids Res 1989, 17, 4883–4884. A. Ozaki, E. J. Toone, C. H. von der Osten, A. J. Sinskey, G. M. Whitesides, J. Am. Chem. Soc. 1990, 112, 4970–4971. W.-D. Fessner, J. Badia, O. Eyrisch, A. Schneider, G. Sinerius, Tetrahedron Lett. 1992, 33, 5231–5234. W.-D. Fessner, A. Schneider, O. Eyrisch, G. Sinerius, J. Badia, Tetrahedron Asymmetry 1993, 4, 1183–1192. S. A. Phillips, P. J. Thornalley, Eur. J. Biochem. 1993, 212, 101–105.
References 173 J. P. Richard, Biochem. Soc. Trans. 1993, 21, 549–553. 174 W.-D. Fessner, C. Walter, Angew. Chem. Int. Ed. Engl. 1992,
31, 614–616. 175 D. C. Crans, G. M. Whitesides, J. Am. Chem. Soc. 1985, 107,
7019–7027. 176 P. D’Arrigo, V. Piergianni, G. Pedrocchi-Fantoni, S.
Servi, J. Chem. Soc. Chem. Commun. 1995, 2505–2506. 177 W.-D. Fessner, G. Sinerius, Angew. Chem. Int. Ed. Engl. 1994,
33, 209–212. 178 R. Schoevaart, F. van Rantwijk, R. A. Sheldon, J Org Chem
2000, 65, 6940–6943. 179 H. L. Arth, G. Sinerius, W.-D. Fessner, Liebigs Ann. 1995,
2037–2042. 180 H. L. Arth, W.-D. Fessner, Carbohydrate Res. 1997, 305, 313–
321. 181 D. G. Drueckhammer, J. R. Durrwachter, R. L. Pederson,
182 183 184 185 186 187 188 189
190 191 192 193 194 195 196 197 198 199 200
D. C. Crans, L. Daniels, C.-H. Wong, J. Org. Chem. 1989, 54, 70–77. R. Schoevaart, F. van Rantwijk, R. A. Sheldon, J. Org. Chem. 2001, 66, 4559–4562. R. A. Periana, R. Motiu-DeGrood, Y. Chiang, D. J. Hupe, J. Am. Chem. Soc. 1980, 102, 3923–3927. F. Effenberger, A. Straub, Tetrahedron Lett. 1987, 28, 1641– 1644. S. H. Jung, J. H. Jeong, P. Miller, C.-H. Wong, J. Org. Chem. 1994, 59, 7182–7184. R. L. Pederson, J. Esker, C.-H. Wong, Tetrahedron 1991, 47, 2643–2648. M. L. Valentin, J. Bolte, Bull. Soc. Chimi. Fr. 1995, 132, 1167–1171. T. Gefflaut, M. Lemaire, M. L. Valentin, J. Bolte, J. Org. Chem. 1997, 62, 5920–5922. E. L. Ferroni, V. DiTella, N. Ghanayem, R. Jeske, C. Jodlowski, M. O’Connell, J. Styrsky, R. Svoboda, A. Venkataraman, B. M. Winkler, J. Org. Chem. 1999, 64, 4943–4945. W.-D. Fessner, Curr Opin Chem Biol 1998, 2, 85–97. I. Henderson, K. B. Sharpless, C.-H. Wong, J. Am. Chem. Soc. 1994, 116, 558–561. M.-J. Kim, I. T. Lim, Synlett 1996, 138–140. W.-D. Fessner, C. Gosse, G. Jaeschke, O. Eyrisch, Eur. J. Org. Chem. 2000, 125–132. C.-H. Wong, G. M. Whitesides, J. Org. Chem. 1983, 48, 3199–3205. K. K. C. Liu, C.-H. Wong, J. Org. Chem. 1992, 57, 4789–4791. T. Ziegler, A. Straub, F. Effenberger, Angew. Chem., Int. Ed. Engl. 1988, 27, 716–717. L. Azema, F. Bringaud, C. Blonski, J. Perie, Bioorg. Med. Chem. 2000, 8, 717–722. W. Zhu, Z. Li, Perkin Trans. 1 2000, 1105–1108. M. D. Bednarski, H. J. Waldmann, G. M. Whitesides, Tetrahedron Lett 1986, 27, 5807–5810. N. J. Turner, G. M. Whitesides, J. Am. Chem. Soc. 1989, 111, 624–627.
267
268
5 Enzyme-catalyzed Aldol Additions 201 D. Crestia, C. Guerard, J. Bolte, C. Demuynck, J. Mol.
Catal. B: Enzym 2001, 11, 207–212. 202 C.-H. Wong, F. Moris-Varas, S.-C. Hung, T. G. Marron,
203 204 205 206 207
208
209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226
C.-C. Lin, K. W. Gong, G. Weitz-Schmidt, J. Am. Chem. Soc. 1997, 119, 8152–8158. O. Eyrisch, M. Keller, W.-D. Fessner, Tetrahedron Lett. 1994, 35, 9013–9016. M. Petersen, M. T. Zannetti, W.-D. Fessner, Top. Curr. Chem. 1997, 186, 87–117. J. R. Durrwachter, C.-H. Wong, J. Org. Chem. 1988, 53, 4175–4181. K. K. C. Liu, R. L. Pederson, C.-H. Wong, J. Chem. Soc., Perkin Trans 1991, 1, 2669–2673. J. R. Durrwachter, D. G. Drueckhammer, K. Nozaki, H. M. Sweers, C.-H. Wong, J. Am. Chem. Soc. 1986, 108, 7812– 7818. D. Franke, V. Lorbach, S. Esser, C. Dose, G. A. Sprenger, ¨ ller, R. Takors, M. Mu ¨ ller, M. Halfar, J. Tho¨mmes, R. Mu Chem. Eur. J. 2003, 9, 4188–4196. C. W. Borysenko, A. Spaltenstein, J. A. Straub, G. M. Whitesides, J. Am. Chem. Soc. 1989, 111, 9275–9276. C.-H. Wong, R. Alajarin, F. Moris-Varas, O. Blanco, E. Garcia-Junceda, J. Org. Chem. 1995, 60, 7360–7363. W.-D. Fessner, GIT Fachz. Lab. 1993, 37, 951–956. W. Schmid, G. M. Whitesides, J. Am. Chem. Soc. 1990, 112, 9670–9671. W.-C. Chou, C. Fotsch, C.-H. Wong, J. Org. Chem. 1995, 60, 2916–2917. H. J. M. Gijsen, C.-H. Wong, Tetrahedron Lett. 1995, 36, 7057–7060. B. P. Maliakel, W. Schmid, J. Carbohydr. Chem 1993, 12, 415–424. F. Nicotra, L. Panza, G. Russo, A. Verani, Tetrahedron Asymmetry 1993, 4, 1203–1204. G. Guanti, L. Banfi, M. T. Zannetti, Tetrahedron Lett 2000, 41, 3181–3185. G. Guanti, M. T. Zannetti, L. Banfi, R. Riva, Adv. Synth. Catal. 2001, 343, 682–691. R. Duncan, D. G. Drueckhammer, J. Org. Chem. 1996, 61, 438–439. F. Effenberger, A. Straub, V. Null, Liebigs Ann. 1992, 1297–1301. W. C. Chou, L. H. Chen, J. M. Fang, C.-H. Wong, J. Am. Chem. Soc. 1994, 116, 6191–6194. G. C. Look, C. H. Fotsch, C.-H. Wong, Acc. Chem. Res. 1993, 26, 182–190. C.-H. Wong, R. L. Halcomb, Y. Ichikawa, T. Kajimoto, Angew. Chem. Int. Ed. Engl. 1995, 34, 412–432. R. L. Pederson, M.-J. Kim, C.-H. Wong, Tetrahedron Lett 1988, 29, 4645–4648. K. K. C. Liu, T. Kajimoto, L. Chen, Z. Zhong, Y. Ichikawa, C.-H. Wong, J. Org. Chem. 1991, 56, 6280–6289. P. Z. Zhou, H. M. Salleh, P. C. M. Chan, G. Lajoie, J. F.
References
227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252
253
Honek, P. T. C. Nambiar, O. P. Ward, Carbohydrate Res. 1993, 239, 155–166. W. J. Lees, G. M. Whitesides, Bioorg. Chem. 1992, 20, 173– 179. R. R. Hung, J. A. Straub, G. M. Whitesides, J. Org. Chem. 1991, 56, 3849–3855. F. Moris-Varas, X.-H. Qian, C.-H. Wong, J. Am. Chem. Soc. 1996, 118, 7647–7652. M. L. Mitchell, L. V. Lee, C.-H. Wong, Tetrahedron Lett. 2002, 43, 5691–5693. M. Schuster, W. F. He, S. Blechert, Tetrahedron Lett 2001, 42, 2289–2291. M. Mitchell, L. Qaio, C.-H. Wong, Adv. Synth. Catal. 2001, 343, 596–599. A. Romero, C.-H. Wong, J. Org. Chem. 2000, 65, 8264–8268. O. Eyrisch, W.-D. Fessner, Angew. Chem. Int. Ed. Engl. 1995, 34, 1639–1641. M. Schultz, H. Waldmann, H. Kunz, W. Vogt, Liebigs Ann. 1990, 1019–1024. D. C. Myles, P. J. I. Andrulis, G. M. Whitesides, Tetrahedron Lett 1991, 32, 4835–4838. R. Chenevert, M. Dasser, J Org Chem 2000, 65, 4529–4531. K. Matsumoto, M. Shimagaki, T. Nakata, T. Oishi, Tetrahedron Lett 1993, 34, 4935–4938. M. Shimagaki, H. Muneshima, M. Kubota, T. Oishi, Chem. Pharm. Bull. 1993, 41, 282–286. R. Chenevert, M. Lavoie, M. Dasser, Can. J. Chem. 1997, 75, 68–73. E. Grazi, M. Mangiarotti, S. Pontremoli, Biochemistry 1962, 1, 628–631. J. F. Williams, P. F. Blackmore, Int. J. Biochem. 1983, 15, 797–816. K. K. Arora, J. G. Collins, J. K. MacLeod, J. F. Williams, Biol. Chem. Hoppe Seyler 1988, 369, 549–557. A. Moradian, S. A. Benner, J. Am. Chem. Soc. 1992, 114, 6980–6987. ¨rmann, G. A. Sprenger, J Biol Chem 2001, 276, M. Schu 11055–11061. ¨rmann, G. A. Sprenger, G. S. Thorell, M. Schu Schneider, J. Mol. Biol. 2002, 319, 161–171. ¨rmann, M. Schu ¨ rmann, G. A. Sprenger, J. Mol. M. Schu Catal. B: Enzym. 2002, 19–20, 247–252. E. Racker, in The Enzymes, Vol. 5 (Eds.: P. Boyer, H. Lardy, K. Myrba¨ck), Academic Press, New York, 1961, pp. 397–406. G. A. Kotchetov, Methods Enzymol. 1982, 90, 209–223. U. Scho¨rken, G. A. Sprenger, Biochim. Biophys. Acta 1998, 1385, 229–243. U. Nilsson, L. Meshalkina, Y. Lindqvist, G. Schneider, J. Biol. Chem. 1997, 272, 1864–1869. E. Fiedler, S. Thorell, T. Sandalova, R. Golbik, S. Konig, G. Schneider, Proc. Natl. Acad. Sci. USA 2002, 99, 591– 595. C. French, J. M. Ward, Biotechnol. Lett. 1995, 17, 247–252.
269
270
5 Enzyme-catalyzed Aldol Additions 254 G. R. Hobbs, R. K. Mitra, R. P. Chauhan, J. M. Woodley,
M. D. Lilly, J. Biotechnol. 1996, 45, 173–179. ¨ rken, G. A. Sprenger, U. 255 J. Bongs, D. Hahn, U. Scho Kragl, C. Wandrey, Biotechnol. Lett. 1997, 19, 213–215. 256 S. Brocklebank, J. M. Woodley, M. D. Lilly, J. Mol. Catal.
B: Enzym. 1999, 7, 223–231. 257 R. P. Chauhan, J. M. Woodley, L. W. Powell, Ann. N. Y.
Acad. Sci. 1996, 799, 545–554. 258 N. J. Turner, Curr Opin Biotechnol 2000, 11, 527–531. 259 K. G. Morris, M. E. B. Smith, N. J. Turner, M. D. Lilly, R.
260 261 262 263 264
265 266
267
268
269 270 271 272 273 274 275
276 277 278
K. Mitra, J. M. Woodley, Tetrahedron Asymmetry 1996, 7, 2185–2188. F. Effenberger, V. Null, T. Ziegler, Tetrahedron Lett 1992, 33, 5157–5160. Y. Kobori, D. C. Myles, G. M. Whitesides, J. Org. Chem. 1992, 57, 5899–5907. J. Bolte, C. Demuynck, H. Samaki, Tetrahedron Lett 1987, 28, 5525–5528. L. Hecquet, C. Demuynck, G. Schneider, J. Bolte, J. Mol. Catal. B: Enzym 2001, 11, 771–776. F. T. Zimmermann, A. Schneider, U. Scho¨rken, G. A. Sprenger, W.-D. Fessner, Tetrahedron: Asymmetry 1999, 10, 1643–1646. A. J. Humphrey, S. F. Parsons, M. E. B. Smith, N. J. Turner, Tetrahedron Lett 2000, 41, 4481–4485. S. V. Taylor, L. D. Vu, T. P. Begley, U. Scho¨rken, S. Grolle, G. A. Sprenger, S. Bringer-Meyer, H. Sahm, J. Org. Chem. 1998, 63, 2375–2377. F. Rohdich, C. A. Schuhr, S. Hecht, S. Herz, J. Wungsintaweekul, W. Eisenreich, M. H. Zenk, A. Bacher, J. Am. Chem. Soc. 2000, 122, 9571–9574. S. Hecht, K. Kis, W. Eisenreich, S. Amslinger, J. Wungsintaweekul, S. Hertz, F. Rohdich, A. Bacher, J. Org. Chem. 2001, 66, 3948–3952. E. Racker, J. Biol. Chem. 1952, 196, 347–365. P. Hoffee, O. M. Rosen, B. L. Horecker, Methods Enzymol. 1966, 9, 545–549. P. A. Hoffee, Arch. Biochem. Biophys. 1968, 126, 795–802. P. Valentin-Hansen, F. Boetius, K. Hammer-Jespersen, I. Svendsen, Eur. J. Biochem. 1982, 125, 561–566. C. F. Barbas, Y. F. Wang, C.-H. Wong, J. Am. Chem. Soc. 1990, 112, 2013–2014. A. Heine, G. DeSantis, J. G. Luz, M. Mitchell, C.-H. Wong, I. A. Wilson, Science 2001, 294, 369–374. H. Sakuraba, H. Tsuge, I. Shimoya, R. Kawakami, S. Goda, Y. Kawarabayasi, N. Katunuma, H. Ago, M. Miyano, T. Ohshima, J. Biol. Chem. 2003, 278, 10799–10806. L. Chen, D. P. Dumas, C.-H. Wong, J. Am. Chem. Soc. 1992, 114, 741–748. H. J. M. Gijsen, C.-H. Wong, J. Am. Chem. Soc. 1995, 117, 2947–2948. J. Liu, G. DeSantis, C.-H. Wong, Can. J. Chem. 2002, 80, 643–645.
References 279 W. Tischer, H.-G. Ihlenfeldt, O. Barzu, H. Sakamoto,
280 281 282 283
284 285
286 287 288 289
290 291 292 293 294 295 296 297
298
299 300
301 302
E. Pistotnik, P. Marliere, S. Pochet, WO 0114566, 2001; Chem. Abstr. 134:208062. N. Ouwerkerk, J. H. Van Boom, J. Lugtenburg, J. Raap, Eur. J. Org. Chem. 2000, 861–866. J. Liu, C.-H. Wong, Angew. Chem. Int. Ed. 2002, 41, 1404– 1407. H. J. M. Gijsen, C.-H. Wong, J. Am. Chem. Soc. 1995, 117, 7585–7591. C.-H. Wong, E. Garcia-Junceda, L. R. Chen, O. Blanco, H. J. M. Gijsen, D. H. Steensma, J. Am. Chem. Soc. 1995, 117, 3333–3339. J. Q. Liu, T. Dairi, N. Itoh, M. Kataoka, S. Shimizu, H. Yamada, J. Mol. Catal. B: Enzym 2000, 10, 107–115. R. Contestabile, A. Paiardini, S. Pascarella, M. L. Di Salvo, S. D’Aguanno, F. Bossa, Eur. J. Biochem. 2001, 268, 6508–6525. B. T. Lotz, C. M. Gasparski, K. Peterson, M. J. Miller, J. Chem. Soc. Chem. Commun. 1990, 16, 1107–1109. A. Saeed, D. W. Young, Tetrahedron 1992, 48, 2507–2514. D. Ura, T. Hashimukai, T. Matsumoto, N. Fukuhara, EP 421477 1991; Chem. Abstr. 115:90657. D. M. Anderson, H.-H. Hsiao, in Biocatalytic Production of Amino Acids & Derivatives (Eds.: D. Rozzell, F. Wagner), Hanser, Munich, 1992, pp. 23–41. M. Bycroft, R. B. Herbert, G. J. Ellames, J. Chem. Soc. Perkin Trans. 1 1996, 2439–2442. V. P. Vassilev, T. Uchiyama, T. Kajimoto, C.-H. Wong, Tetrahedron Lett. 1995, 36, 4081–4084. T. Kimura, V. P. Vassilev, G. J. Shen, C.-H. Wong, J. Am. Chem. Soc. 1997, 119, 11734–11742. J. Q. Liu, T. Dairi, M. Kataoka, S. Shimizu, H. Yamada, J. Bacteriol. 1997, 179, 3555–3560. C. L. Kielkopf, S. K. Burley, Biochemistry 2002, 41, 11711– 11720. M. Fujii, T. Miura, T. Kajimoto, Y. Ida, Synlett 2000, 1046– 1048. T. Miura, M. Fujii, K. Shingu, I. Koshimizu, J. Naganoma, T. Kajimoto, Y. Ida, Tetrahedron Lett. 1998, 39, 7313–7316. K. Shibata, K. Shingu, V. P. Vassilev, K. Nishide, T. Fujita, M. Node, T. Kajimoto, C.-H. Wong, Tetrahedron Lett. 1996, 37, 2791–2794. S. H. Wu, M. Shimazaki, C. C. Lin, L. Qiao, W. J. Moree, G. Weitz-Schmidt, C.-H. Wong, Angew. Chem. Int. Ed. Engl. 1996, 35, 88–90. R. B. Herbert, B. Wilkinson, G. J. Ellames, Can. J. Chem. 1994, 72, 114–117. J. Q. Liu, M. Odani, T. Yasuoka, T. Dairi, N. Itoh, M. Kataoka, S. Shimizu, H. Yamada, Appl Microbiol Biotechnol 2000, 54, 44–51. H. J. M. Gijsen, C.-H. Wong, J. Am. Chem. Soc. 1994, 116, 8422–8423. V. Dalmas, C. Demuynck, Tetrahedron Asymmetry 1993, 4, 2383–2388.
271
272
5 Enzyme-catalyzed Aldol Additions 303 L. Hecquet, J. Bolte, C. Demuynck, Tetrahedron 1994, 50,
8677–8684. 304 U. T. Bornscheuer, M. Pohl, Curr. Opin. Chem. Biol. 2001,
5, 137–143. 305 K. A. Powell, S. W. Ramer, S. B. del Cardayre´, W. P. C.
306 307 308
309 310 311 312 313 314 315 316 317 318 319 320
Stemmer, M. B. Tobin, P. F. Longchamp, G. W. Huisman, Angew. Chem. Int. Ed. 2002, 41, 3949–3959. K. E. Jaeger, T. Eggert, A. Eipper, M. T. Reetz, Appl. Microbiol. Biotechnol. 2001, 55, 519–530. R. Perez Carlon, N. Jourdain, J. L. Reymond, Chem. Eur. J. 2000, 6, 4154–4162. E. Gonzalez-Garcia, V. Helaine, G. Klein, M. Schuermann, G. A. Sprenger, W.-D. Fessner, J.-L. Reymond, Chem. Eur. J. 2003, 9, 893–899. A. Sevestre, V. Helaine, G. Guyot, C. Martin, L. Hecquet, Tetrahedron Lett. 2003, 44, 827–830. D. Wahler, J.-L. Reymond, Curr. Opin. Chem. Biol. 2001, 5, 152–158. G. J. Williams, S. Domann, A. Nelson, A. Berry, Proc. Natl. Acad. Sci. USA 2003, 100, 3143–3148. S. S. Patel, H. D. Conlon, D. R. Walt, J. Org. Chem. 1986, 51, 2842–2844. T. Ouyang, D. R. Walt, S. S. Patel, Bioorg. Chem. 1990, 18, 131–135. T. Ouyang, D. R. Walt, J. Org. Chem. 1991, 56, 3752–3755. R. Jossek, A. Steinbuchel, FEMS Microbiol. Lett. 1998, 168, 319–324. Y. Satoh, K. Tajima, H. Tannai, M. Munekata, J. Biosci. Bioeng. 2003, 95, 335–341. C. Khosla, R. J. X. Zawada, Trends Biotechnol. 1996, 14, 335– 341. P. F. Leadlay, Curr. Opin. Chem. Biol. 1997, 1, 162–168. C. R. Hutchinson, Proc. Natl. Acad. Sci. USA 1999, 96, 3336–3338. T. A. Cropp, B. S. Kim, B. J. Beck, Y. J. Yoon, D. H. Sherman, K. A. Reynolds, Biotechnol. Gen. Eng. Rev. 2002, 19, 159–172.
273
6
Antibody-catalyzed Aldol Reactions Fujie Tanaka and Carlos F. Barbas, III 6.1
Introduction
Antibody catalysts have been designed to process a wide range of aldol reactions. Although aldol reactions can be catalyzed chemically and enzymatically, catalytic antibodies significantly extend the range of aldol reactions. Natural aldolase enzymes have substrate specificity that are predetermined by nature (although they can be engineered); antibody catalysts designed by synthetic chemists can have substrate specificity different from those of natural enzymes. In this chapter, we describe antibodies that catalyze aldol reactions (aldolase antibodies), their features, reactions and applications ranging from synthetic chemistry to the treatment of cancer.
6.2
Generation of Aldolase Antibodies 6.2.1
Antibody as Catalyst Scaffold
An antibody immunoglobulin G (IgG) molecule is represented schematically in Figure 6.1. One IgG is composed of four polypeptide chains, two identical light chains, and two identical heavy chains. The molecular weight of an IgG is @150,000 daltons and each IgG has two identical antigen-binding sites. The fragment antigen binding (Fab) portion of the IgG molecules have identical antigen binding sites, however; the molecular weight of this antibody fragment is @50,000 daltons. One antigen binding site is constructed by display of the six complementarity-determining regions (CDR) on a structurally conserved protein framework. The CDR regions are designated LCDR1, LCDR2, and LCDR3 in the light chain variable domain (VL) and HCDR1, HCDR2, and HCDR3 in the heavy variable domain (VL). The immune system has the potential to provide an almost Modern Aldol Reactions. Vol. 1: Enolates, Organocatalysis, Biocatalysis and Natural Product Synthesis. Edited by Rainer Mahrwald Copyright 8 2004 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim ISBN: 3-527-30714-1
274
6 Antibody-catalyzed Aldol Reactions
HCDR1 HCDR2 HCDR3
VH CH1
VL Fab
LCDR1 LCDR2 LCDR3
CL CH2 Fc CH3
Fig. 6.1
Schematic representation of an antibody (IgG) molecule. One antibody molecule has two identical active sites. A light chain is built up from one variable domain (VL) and one constant domain (CL), and a heavy chain from one variable domain (VH), followed by constant domains (CH1, CH2, and CH3). Complementarity determining regions, CDR1–CDR3, vary most significantly among different immunoglobulins and determine the specificity of the antigen–antibody interactions.
limitless array of diverse antibodies that can bind to their antigens with high specificity. The amino acid residues in VL and VH, especially in the six CDR, vary among different immunoglobulins, and determine the specificity of antigen–antibody interactions, whereas constant domains support the structural stability of the antibody and provide connectivity to the rest of the immune system via conserved interactions. By taking advantage of the immune system and the highly specific binding of antibodies, antibodies that process chemical transformations have been developed [1]. Antigen binding sites of antibodies can serve as the catalytic active sites for catalysis of a wide variety of reactions. 6.2.2
Generation of Aldolase Antibodies that Operate via an Enamine Mechanism
Together with our colleagues, we have developed antibodies that catalyze aldol reactions via the covalent enamine mechanism of natural class I aldolases. Natural class I aldolases utilize the e-amino group of a lysine in their active site to form an enamine, a carbon nucleophile, in their catalyzed aldol reactions [2]. One of the most important issues for development of such antibody catalysts is the pK a of the active site lysine e-amino group. The pK a of the e-amino group of lysine in aqueous solution is 10.7 [3], and the e-amino group is protonated at neutral pH and thus is not nucleophilic
6.2 Generation of Aldolase Antibodies
under physiological conditions. For the e-amino group to be nucleophilic it must be in its uncharged form, i.e. the pK a must be perturbed as observed in class I aldolase enzymes. Although many types of antibody catalyst have been generated, selection of antibody catalysts has typically been based on binding to transition state analogs of the reactants or charged compounds designed using information from the reaction coordinate of a given chemical transformation [1]. Although this strategy has occasionally provided antibody catalysts that use a covalent mechanism, expecting the fortuitous is obviously not a reasonable way to gain access to aldolase antibodies that operate via a covalent enamine mechanism. Thus, together with our colleagues we have developed catalytic function and residue-based selections by using 1,3-diketones for immunization, a strategy later termed reactive immunization [4]. Reactive immunization provides a means of selecting antibody catalysts in vivo on the basis of their capacity to perform a chemical reaction [4, 5]. In this approach, a designed reactive immunogen is used for immunization and chemical reaction(s), for example formation of a covalent bond, occurs in the binding pocket of the antibodies during their induction. The chemical reactivity and mechanism integrated into the antibody by the covalent trap with the reactive immunogen are used in catalytic reactions with substrate molecules. The most highly proficient and efficient catalytic antibodies, aldolase antibodies, have a nucleophilic lysine residue in their active site and were generated by this reactive immunization strategy. Reactive Immunization with the Simple Diketone Derivative Historically, Frank Westheimer used 1,3-diketones as mechanistic probes of the enzyme acetoacetate decarboxylase [6]. The active site of acetoacetate decarboxylase has a nucleophilic lysine e-amino group and forms a Schiff base in its catalytic cycle. In his studies, the active site lysine e-amino group of this enzyme reacted covalently with the 1,3-diketones. Later 1,3-diketones were used as modification reagents for the nucleophilic lysine e-amino groups of many enzymes [7]. We used 1,3-diketone hapten 1-carrier protein conjugate for immunization in our experiments to generate aldolase antibodies (Scheme 6.1) [4]. Class I aldolases use the e-amino group of a lysine in their active site to form a Schiff base with one of their substrates and this substrate becomes the aldol donor substrate. Schiff-base formation reduces the activation energy for proton abstraction from the Ca atom and for subsequent enamine formation. The enamine, a carbon nucleophile, then reacts with an aldehyde substrate, the aldol acceptor, to form a new CaC bond. The Schiff base is then hydrolyzed and the product is released [2]. The 1,3-diketone hapten acts as a mechanism-based trap of the requisite lysine residue in the active site and this lysine is necessary for formation of the essential enamine intermediate. The molecular steps involved in trapping the requisite lysine residue are essentially the same chemical steps as are involved in activating 6.2.2.1
275
Scheme 6.1
(a) Diketone 1 used for aldolase antibody induction and selection, and mechanism of trapping of the essential eamino group of a Lys residue in the antibody (AbaNH2 ) binding pocket by using 1. (b) Antibody-catalyzed aldoladdition reaction (AbaNH2 ¼ aldolase antibody). (c) UV spectra of non-catalytic and aldolase antibodies with 1 [1]. The aldolase antibody forms enaminone 2, readily detected at l ¼ 316 nm. (d) Kinetic data for aldolase antibodycatalyzed reactions.
6.2 Generation of Aldolase Antibodies
a substrate ketone to an enamine. These include: (1) catalysis of carbinolamine formation, (2) dehydration, and (3) a-deprotonation of the imminium intermediate to form enamine. This mechanistic mimicry enables selection of an active site that can adapt to the chemical and steric changes that occur during the course of the reaction. Further, the diketone structure provides appropriate binding sites for the two substrates of the intermolecular reaction and facilitates crossing of the entropic barrier intrinsic to this bimolecular reaction. The driving force for reaction of the 1,3-diketone hapten with the antibody is the formation of a stable covalent conjugated enaminone (2) between hapten 1 and e-amino group of lysine (Scheme 6.1). Antibodies prepared from hybridomas derived after immunization with 1,3-diketone hapten 1-carrier protein conjugate were screened for their capacity to form the stable enaminone (absorption maximum l max ¼ 316 nm) with hapten 1. Of the 20 antibodies screened two, 38C2 and 33F12, reacted to form a covalent bond with the 1,3-diketone and generated the enaminone absorption band in the UV. These two antibodies catalyzed aldol addition of acetone to aldehyde 3 to give b-hydroxyketone 4. The saturation kinetics of the antibody-catalyzed reactions were described by the Michaelis–Menten equation. Both antibodies catalyzed the addition of acetone to the si face of 3, irrespective of the stereochemistry at a-position of this aldehyde. These antibodies also catalyzed the retro-aldol reaction of 4. The other antibodies were unable to catalyze the aldol and retro-aldol reactions, indicating that only those that formed the critical enaminone intermediate were active. The catalytic activity of 38C2 and 33F12 was completely inhibited when either hapten 1 or 2,4-pentanedione was added before addition of acetone or aldehyde 3, indicating the antigen-binding site is also the catalytically active site. For the aldol reaction of acetone and aldehyde 3 at pH 7.5, aldolase antibodies 38C2 and 33F12 had ðkcat =Km Þ=k uncat A 10 9 . The efficiency of catalysis is largely because of an entropic advantage in the antibody-catalyzed reaction, which is reflected as a high effective molarity, kcat =k uncat > 10 5 m. With the best substrates identified to date for the retro-aldol reaction [8–10], the catalytic proficiency ðkcat =Km Þ=k uncat A 6 10 10. The catalytic efficiency ðkcat =Km Þ of these aldolase antibodies with these substrates is only @20– 40-fold below that of the most studied aldolase enzyme, fructose-1,6bisphosphate aldolase 4.9 10 4 s1 m1 [2b]. The pK a of the active site lysine was determined to be 5.5 and 6.0 for antibodies 33F12 and 38C2, respectively, from the pH dependence of enaminone formation with 3-methyl2,4-pentanedione [11]. These perturbed pK a values are consistent with the catalysis and mechanism of these antibodies. Combining Reactive Immunization with Transition-state Analogs To improve on the initial concepts of reactive immunization, hapten 5 (Scheme 6.2) was used for induction of aldolase antibodies. Although 1,3diketone hapten 1 enabled generation of the efficient aldolase antibodies 38C2 and 33F12, the hapten does not address the tetrahedral geometry of 6.2.2.2
277
278
6 Antibody-catalyzed Aldol Reactions
(a) O
O R
H
+
H2N Lys Ab R"
≠
δOH R
R'
OH O
R"
R'
δ+ N Lys Ab H
R
R" R'
Transition state (b)
Transition state analog
H N
HO O
O O S
O 5
H2N Lys Ab O O
O O S R O
N Lys Ab H
Reactive immunization Scheme 6.2
Diketone 5, used for generation of aldolase antibodies, includes conceptual elements derived from reactive immunization and transition state analog design. Ab-LysNH2 ¼ aldolase antibody.
the rate-determining transition state of the CaC bond-forming step. Hapten 5 contains features common to the transition state analog of the enzymecatalyzed reaction. The use of a transition state analog approach has been successfully used to generate antibodies that catalyze a diverse set of reactions whereas the 1,3-diketone functionality proved to be key for the reactive immunization strategy [12]. The tetrahedral geometry of the sulfone moiety in hapten 5 mimics the tetrahedral transition state of the CaC bondforming step and should therefore facilitate nucleophilic attack of the enamine intermediate on the acceptor aldehyde substrate. Nine antibodies out of 17 screened reacted with 2,4-pentanedione to form a stable enaminone, and all nine antibodies were catalytic. These results are consistent with a covalent catalytic mechanism in which a reactive amine is programmed in these antibodies. It is of practical interest that immunization with hapten 5 generated the two families of catalysts that operate on opposite optical isomers. Antibodies 93F3 and 84G3 generated with hapten 5 have reactivity antipodal to that of antibodies 38C2 and 33F12 generated with hapten 1, and antibodies 40F12 and 42F1 generated with hapten 5 have the same enantio preference as antibodies 38C2 and 33F12. The rate enhancement, kcat =k uncat , of the best of the nine antibodies (84G3) was 2.3 10 8 ; its catalytic proficiency ½ðkcat =Km Þ=k uncat was 7.7 10 13 , approximately 1000-fold higher than that reported for any other catalytic antibody [1c]. In this instance the catalytic efficiency ðkcat =Km Þ of 84G3, 3.3 10 5 s1 m1 , is slightly greater than that of the best characterized aldolase enzyme, fructose-1,6-biphosphate aldolase [2b].
6.3 Aldolase Antibody-catalyzed Aldol and Retro-aldol Reactions
O O
carrier protein N H H N carrier protein
N
O
O
O
N O
O
O 6
279
7
Fig. 6.2
Alternative diketones 6 and 7, used for generation of aldolase antibodies.
Reactive Immunization with other Diketones To expand the concept of reactive immunization with diketones, a mixture of diketones 6 and 7 (Figure 6.2) were used for generation of the aldolase antibody 24H6 that operates via an enamine mechanism to catalyze a distinct set of aldol reactions [13]. 6.2.2.3
6.3
Aldolase Antibody-catalyzed Aldol and Retro-aldol Reactions
Aldolase antibodies generated with any of the diketone haptens are typically very broad in scope, accepting a wide variety of substrates. The broad substrate specificity of aldolase antibodies are unprecedented in the field of catalytic antibodies. Traditionally, antibody catalysts are very specific and only catalyze the reaction of a single substrate (or substrate combination). This is because, in normal immunization, a series of somatic mutations usually leads to highly specific binding of the inducing antigen [1, 14]. For aldolase antibodies selected with the diketones the usual process of somatic refinement might be aborted because any clone that carries an antibody that has made a covalent bond with the antigen will be selected above clones containing only non-covalent antibody–antigen interactions. This is because no matter how many productive non-covalent interactions are generated by competing clones, they cannot equal the binding energy achieved by a formation of a single covalent bond. When a covalent bond is formed early in the process of antibody evolution, any selective pressure on the refinement process may cease. Antibodies selected in this way are efficient because, like Nature’s enzymes, they were selected on the basis of a chemical reaction. Unlike enzymes, however, they are broad in scope because the usual requirement for refinement of the binding pocket has been circumvented.
280
6 Antibody-catalyzed Aldol Reactions
6.3.1
Antibody 38C2-catalyzed Aldol Reactions
Aldolase antibodies 38C2 and 33F12 generated by immunization with diketone 1 are capable of accelerating more than 100 different aldol reactions [4, 8, 11, 15, 16]. Some examples of cross-aldol reactions are shown in Table 6.1. For cross-aldol reactions, a variety of ketones are accepted as donors, including aliphatic open-chain ketones (for example acetone to pentanone), aliphatic cyclic ketones (cyclopentanone to cycloheptanone), functionalized open-chain ketones (hydroxyacetone, dihydroxyacetone, fluoroacetone), and functionalized cyclic ketones (2-hydroxycyclohexanone). As with the donors, the antibodies also accept different kinds of aldehyde substrate, for example benzaldehyde derivatives 8–10, a,b-unsaturated aldehyde 11, and aliphatic aldehydes 12 and 13 with products as indicated in Table 6.1. These aldolase antibody-catalyzed reactions are often highly enantioselective. The enantioselectivity rules for 38C2-catalyzed aldol reactions are simple and general, although this selectivity was not directly programmed by the diketone hapten used for the immunization. Asymmetric induction is a consequence of the asymmetry of the active site that directs the attack of the enamine intermediate while stereochemically fixing the face of the acceptor aldehyde. With acetone as the aldol donor substrate a new stereogenic center is formed by attack of the si face of the aldehyde, usually with >95% enantiomeric excess (ee). With hydroxyacetone as the donor substrate, the Z-enamine of hydroxyacetone reacts on the re face of the aldehyde. The antibody-catalyzed reactions of hydroxyacetone as the donor provided only the single regioisomer as shown in the formation of 16, 18, 20, 24, and 25 (Table 6.1). Lower enantioselectivity was achieved with acceptor aldehydes containing an sp 3 center in the a-position, for example the reaction with 12, although reactions with hydroxyacetone as the donor increased the enantioselectivity (for example, formation of 24 and 25 in Table 6.1). In the antibody-catalyzed reactions of 2-butanone with aldehydes, a mixture of both possible regioisomers of aldol products was formed with moderate selectivity by preferential bond formation at the most substituted carbon atom of the ketone. Although a variety of secondary aldols can be prepared by aldolase antibody 38C2-catalyzed cross-aldol reactions, tertiary aldols are typically not accessible via intermolecular cross-aldol reactions. For preparation of enantiomerically enriched tertiary aldols, aldolase antibody 38C2-catalyzed retroaldol reactions can be used (Section 6.3.2). Antibodies 38C2 and 33F12 also catalyzed self-aldol condensations of propionaldehyde and provided the aldol-elimination product 26, and the antibodies did not catalyze the consecutive aldol reaction of 26 with propionaldehyde (Scheme 6.3). The antibodies did not catalyze the self-aldol reactions of aldehydes bearing a longer alkyl chain (bvaleraldehyde, for example, aldehydes 3, 12, and 13). It might not be possible for the antibody to accept two
6.3 Aldolase Antibody-catalyzed Aldol and Retro-aldol Reactions Tab. 6.1
Antibody 38C2-catalyzed cross-aldol reactions. Acceptor
Donor
Product
O O
ee (%) OH O
O
H
O
98
(S)-14
N H
N H
8
OH O O O 15
N H
OH O O
O OH
OH
N H
16
O O
OH O O
H
O (S)-17
N H
>99
N H
9
OH O O
O OH
OH
N H O
18
OH O O
H
98 (S)-19
O2N
O 2N
10
OH O O OH O 2N
20
O
OH O O
H O2N
O
O
99 (S)-21
O 2N
11 H N
OH
H N
O
OH O
O
H
(R)-22
12 H N
O
OH O
O 23
20
281
282
6 Antibody-catalyzed Aldol Reactions Tab. 6.1 (continued)
Acceptor
Donor
Product
ee (%)
H N
OH O
O OH
O 24
77 (de >99)
OH
OH O
O
O H
98
OH
13
25 OH
Substrates
Product
kcat (minC1 )
Km (mM)
8 þ acetone 8 þ hydroxyacetone 9 þ acetone 9 þ hydroxyacetone 10 þ acetone 12 þ acetone
14 16 17 18 19 22
0.048 0.11 0.21 1.1 0.04 0.11
204 348 123 184 27 256
molecules of aldehyde with a larger substituent in the active-site cavity. Selfaldol reactions of acetone or cyclopentanone were also catalyzed by the antibodies in the absence of acceptor aldehyde for a cross-aldol reaction. In this instance the aldol product was also converted to the elimination product by the antibodies (for example, formation of 27). Antibodies 38C2 and 33F12 also catalyzed intramolecular aldol reactions and Robinson annulation (Scheme 6.4); 1,5-diketones 28 and 30 were converted into 29 and 31, respectively [15]. To explore the scope of Baldwin’s rules in antibody-catalyzed intramolecular aldol reactions, 38C2 was incubated with three different aliphatic diketones – 2,4-hexanedione, 2,5-heptanedione and 2,6-octanedione. No catalysis was observed in the
O
O
H
H 26 O
O
O OH 27
Scheme 6.3
Antibody 38C2-catalyzed self-aldol reactions.
6.3 Aldolase Antibody-catalyzed Aldol and Retro-aldol Reactions
O
O (S)-28
O
O (R)-28
O
(S)-29
O
O
(R)-29 O
O
O 30
O (S)-31 >95% ee
Substrate
Product
kcat (min-1 )
K m (mM)
(S)-28
(S)-29
0.186
12.4
(R)-28
(R)-29
0.126
2.45
30
31
0.086
2.34
Scheme 6.4
Antibody 38C2-catalyzed intramolecular aldol reactions.
reaction pathway from 2,4-hexanedione to 3-methylcyclopent-2-enone, presumably because of the Baldwin disfavored 5(enolendo-trig) process involved in the attack of the enamine at C2 in 2,4-hexanedione. Although the corresponding ring closure (followed by water elimination) of 2,6-octanedione to give 3-methylcyclohept-2-enone is Baldwin favored (a 7(enolendo-trig) process) in this instance also no product formation was observed. In contrast, the Baldwin favored ring closure reaction of 2,5-heptanedione, (a 6(enolendotrig) process) followed by elimination of water and giving 3-methylcyclohex2-enone was catalyzed by antibody 38C2 [8]. 6.3.2
Antibody 38C2-Catalyzed Retro-aldol Reactions and their Application to Kinetic Resolution
The antibodies also catalyzed retro-aldol reactions of secondary [9, 11, 16] and tertiary aldols [10]. In these retro-aldol reactions antibodies 38C2 and 33F12 processed hydroxyketones whose stereochemistry was the same as that of the aldol reaction product. Kinetic resolution by the retro-aldol reaction therefore provided the opposite enantiomer from the forward aldol reaction (Scheme 6.5 and Table 6.2). For example, (R)-14 (> 99% ee) was obtained by the 38C2-catalyzed kinetic resolution of (G)-14 (Table 6.2) whereas
283
284
6 Antibody-catalyzed Aldol Reactions O
O +
R
H OH
38C2 or 33F12 Enantioselective aldol reaction
O
R Racemic
O
OH
O
R
38C2 or 33F12 Enantioselective retro -aldol reaction (Kinetic resolution)
OH
R
Scheme 6.5
Stereochemistry of antibody 38C2-catalyzed aldol reactions and kinetic resolution.
(S)-14 (98% ee) was formed in the 38C2-catalyzed forward-aldol reaction (Table 6.1). The recovered aldols were highly enantiomerically enriched by the aldolase antibody-catalyzed kinetic resolution; examples include secondary aldols 14, 17, 21, and 32–35, and tertiary aldols 36–40 (Tables 6.2 and 6.3). Kinetic resolution with antibody 38C2 usually afforded higher enantiomeric excess for the recovered aldols than the forward aldol reactions, because one enantiomer was completely consumed in the resolution. For example, (S)-32 was obtained in >99% ee by 38C2-catalyzed kinetic resolution after 67% conversion whereas in the 38C2-catalyzed forward aldol reaction (R)-32 was obtained in 58% ee. In the aldol reactions to form secondary aldols the equilibrium constants favor the aldol product. For example, the aldol reaction of acetone with benzaldehyde has an equilibrium constant of 12 m1 [17]. Aqueous solutions containing 1 m acetone and 1 mm benzaldehyde reached equilibrium when 92% of the benzaldehyde had reacted to form the aldol. In the retroaldol reaction of a 1 mm solution of the aldol, equilibrium was reached at 99% conversion to benzaldehyde. Aldolase antibodies 38C2 and 33F12 efficiently provided enantiomerically enriched secondary aldols via aldol reactions or retro-aldol reactions, i.e. kinetic resolution of racemic aldols. The concentration of the substrates determined the reaction direction, aldol or retro-aldol, with these aldolase antibodies. In the aldol reaction of acetone and acetophenone, the equilibrium constant is 0.002 m1 [18]. A 1 mm solution of acetophenone would require the concentration of acetone to be 10,000 m (neat acetone ¼ 13.6 m) to reach 95% conversion. In the retro-aldol reaction, a 1 mm solution of this tertiary aldol would be converted almost completely to its constituent ketones at equilibrium. This is consistent with the fact that aldolase antibodies 38C2 and 33F12 can be used for kinetic resolution of tertiary aldols, but not for the forward aldol reactions to form tertiary aldols. While general access to optically active tertiary aldols is not available by traditional synthetic methods, a variety of enantiomerically enriched tertiary aldols can be prepared by aldolase antibody-catalyzed kinetic resolution. Significantly, the aldolase antibodies process not only keto-aldols but also aldehyde-aldols for example, the reaction to provide (S)-40.
6.3 Aldolase Antibody-catalyzed Aldol and Retro-aldol Reactions Tab. 6.2
Secondary aldols prepared by antibody 38C2-catalyzed kinetic resolution. Product
Conversion
ee (%)
52%
>99
52%
>99
51%
>99
67%
>99
50%
95
54%
98
OH O O N H
(R )-14 OH O
O N H
(R)-17 OH O
(R)-21
O2 N
OH O O N H
(S)-32 OH O
MeO
(R )-33 OH O
MeO
(4S,5R)-34 OH O
MeO
(R)-35
Substrate
kcat (minC1 Þ
Km (mM)
kcat /kuncat
kcat /Km /kuncat (MC1 )
(S)-17 (G)-33 (G)-anti-34 (G)-35
1.4 2.2 1.4 1.0
270 16 93 14
1.7 10 7 1.0 10 5 1.9 10 4 1.0 10 6
6.2 10 10 6.3 10 9 2.1 10 8 7.1 10 10
6.3.3
Aldol and Retro-aldol Reactions Catalyzed by Antibodies 93F3 and 84G3
Aldolase antibodies 93F3 and 84G3 also have promiscuous active sites and catalyze reactions of a variety of substrates [12, 19]. These antibodies pro-
285
286
6 Antibody-catalyzed Aldol Reactions Tab. 6.3
Tertiary aldols prepared by antibody 38C2-catalyzed kinetic resolution. Product
Conversion (%)
ee (%)
50
>99
52
80
50
94
50
>99
50
95
OH O
MeO
(R)-36 OH O
O (S)-37
N H
OH O
(R)-38
MeO
OH O
MeO
(R)-39
O 2N
O N
OH O O
H (S)-40
Substrate
kcat (minC1 )
Km (mM)
kcat / kuncat
kcat /Km /kuncat (MC1 )
(S)-36 (G)-37 (G)-38 (G)-40
1.8 4.6 0.15 0.02
0.12 0.11 1.62 0.13
1.2 10 6 8.4 10 5
1.3 10 10 7.7 10 9
vide the opposite enantioselectivity to the 38C2 and 33F12-catalyzed reactions. Examples of antibody 93F3-catalyzed aldol reactions are shown in Table 6.4. Antibodies 93F3 and 84G3 provided (R)-17, (R)-19, and (R)-21 in the aldol reactions of acetone and aldehydes 9, 10, and 11, respectively, whereas antibodies 38C2 and 33F12 provided the corresponding (S) enantiomers in the aldol reactions (Table 6.1). When unsymmetrical ketones were used in antibody 84G3-catalyzed cross-aldol reactions with aldehydes the reactions occurred exclusively at the less substituted carbon atom of the ketones, irrespective of the presence of heteroatoms in the ketones: Aldol products (R)-41–44 were regioselectively and enantioselectively obtained. This is a notable feature, because antibodies 28C2 and 33F12 gave the corresponding regioisomer mixtures and because the background reaction fa-
6.3 Aldolase Antibody-catalyzed Aldol and Retro-aldol Reactions Tab. 6.4
Aldol reactions catalyzed by antibodies 93F3 and 84G3. Acceptor
Donor
Product
O O
OH O H
N H
O
O N H
9 O
O 2N
10
93F3
95
93F3
98
(R)-19 OH O
H
O
11
O2N
O
(R)-21 OH O
H O2N
>99
OH O
O
O2N
93F3 (R)-17
O
H O2N
Antibody ee (%)
O O 2N
10
84G3
95 (dr 100:1)
84G3
95 (dr 99:1)
84G3
95 (dr 100:1)
84G3
95 (dr 98:2)
(R)-41 OH O
O O2N
(R)-42 OH O
O
OMe OMe O2N
(R)-43 OH O
O
SMe SMe O2N
(R)-44
vored the formation of the other regioisomers. In contrast with antibodies 38C2 and 33F12, aldolase antibodies 93F3 and 84G3 were very poor catalysts for aldol reactions involving hydroxyacetone as donor with aldehydes as acceptors. When kinetic resolution of aldol (G)-17 was performed with antibody 93F3, (S)-17 (>99% ee) was obtained at 52% conversion (Table 6.5), whereas antibody 38C2 provided (R)-17 in the kinetic resolution (Table 6.2). The catalytic proficiency of antibodies 93F3 and 84G3 usually exceeded that of antibody 38C2, especially for retro-aldol reactions of 3-keto-5-hydroxy-type substrates (for example, 45 and 46). In contrast with antibodies 38C2 and
287
288
6 Antibody-catalyzed Aldol Reactions Tab. 6.5
Examples of kinetic resolution catalyzed by antibodies 93F3 and 84G3. Product
Conversion
ee (%)
52%
>99
50%
99
50%
>99
50%
96
OH O O N H
(S)-17 OH O
MeO
(S)-35 OH O
MeO
(S)-45 OH O
MeS
(S)-46 OH O
MeO
(S)-33
Substrate
Antibody
kcat (minC1 )
Km (mM)
kcat /kuncat
kcat /Km /kuncat (MC1 )
(G)-35
93F3 84G3 93F3 84G3 93F3 84G3
2.63 3.5 43.3 46.8 69.6 81.4
15 23 6.5 10.3 2.6 4.2
2.7 10 6 3.6 10 6 4.9 10 7 5.2 10 7 1.9 10 8 2.3 10 8
1.8 10 11 1.6 10 11 7.4 10 12 5.0 10 12 7.4 10 13 5.4 10 13
(G)-45 (R)-46
33F12, antibodies 93F3 and 84G3 cannot process retro-aldol reactions of tertiary aldols. 6.3.4
Preparative-scale Kinetic Resolution Using Aldolase Antibodies in a Biphasic Aqueous–Organic Solvent System
Antibody-catalyzed reactions are typically performed in aqueous buffer, because catalytic antibodies function ideally in an aqueous environment. Many organic molecules of interest are, however, poorly soluble in water. For the transformation of such molecules by aldolase antibodies, a biphasic
6.3 Aldolase Antibody-catalyzed Aldol and Retro-aldol Reactions Tab. 6.6
Preparative scale kinetic resolution in biphasic system. Product
Antibody
Time
Recovery (%)
ee (%)
1.55 g (49)
>97
OH O
N
(R)-47
38C2 (255 mg, 0.025 mol%)
88 h
84G3 (16 mg, 0.015 mol%)
340 h
154 mg (48)
95
38C2 (15.4 mg, 0.10 mol%)
144 h
25 mg (50)
97
91 h
469 mg (47)
97
172 h 259 h
441 mg (42) 458 mg (43)
97 97
193 h
22 mg (44)
99
OH O
N
(S)-47
OH O
MeO
(R)-35 OH O
MeO
(S)-35 OH O
MeO
84G3 (210 mg, 0.065 mol%) reuse (2nd round) reuse (3rd round) 38C2 (18 mg, 0.12 mol%)
(R)-36 OH O
84G3 (500 mg, 0.0086 mol%) MeO
65 h
10 g (50)
>99
(S)-45
aqueous–organic solvent system was especially useful in a large-scale reaction [20]. Although water-miscible solvents can be used to increase the solubility of the substrates, antibody 38C2-catalyzed kinetic resolution of (G)-47 in 20% CH3 CN–buffer resulted in reduced reactivity and a lower enantioselectivity than the reaction in 2–5% CH3 CN–buffer. The same reaction in toluene–phosphate buffer yielded (R)-47 in >97% ee with 49% recovery. Examples of kinetic resolution in biphasic systems are given in Table 6.6. In the biphasic system, racemic substrate (50–100 mm) in toluene or chlorobenzene is mixed with an antibody solution in buffer, for example, a 20-gscale reaction is performed in a reaction volume of @700 mL. After completion of the reaction (determined by monitoring the ee of the substrate by HPLC) the mixture is cooled (20 C) and the organic phase is easily separated from the frozen aqueous antibody solution. The product is purified by conventional column chromatography. The antibody solution is thawed and can be reused. Although the activity of the recycled catalysts was lower
289
290
6 Antibody-catalyzed Aldol Reactions
than on first use and longer reaction time was necessary for reactions using recycling catalysts, the enantioselectivity of the reaction with the recycling catalysts was retained. 6.3.5
Aldolase Antibody-catalyzed Reactions in Natural Product Synthesis
Aldolase antibody-catalyzed aldol reactions and kinetic resolution are an efficient means of synthesis of highly enantiomerically pure aldols. These processes have been used for the total synthesis of cytotoxic natural products epothilone A (48) and C (49) (Scheme 6.6) [21]. These compounds have
Scheme 6.6
Syntheses of epothilones using aldolase antibody-catalyzed reactions.
6.3 Aldolase Antibody-catalyzed Aldol and Retro-aldol Reactions
OH
OH N
N HO
S
O 55 99% ee (50% conversion) by 84G3 99% ee (50% conversion) by 93F3
S
MeO
O 56 95% ee (51% conversion) by 84G3 95% ee (51% conversion) by 93F3
OH
OH
N MeS
N
S
O 57
99% ee (55% conversion) by 84G3 99% ee (54% conversion) by 93F3
S
O F 96% ee (54% conversion) by 84G3 98% ee (52% conversion) by 93F3 58
Fig. 6.3
Chiral precursors for syntheses of epothilones and their derivatives, which were prepared by aldolase antibodycatalyzed reactions.
a taxol-like mode of action, functioning by stabilization of cellular microtubules. The structural moieties (þ)-syn-50 and ()-51 were prepared by antibody 38C2-catalyzed reactions and converted to the intermediates 52 and 53, respectively. The key compound ()-51 (98% ee) was also obtained by kinetic resolution using antibodies 93F3 and 84G3 [22]. Chiral precursors 55–58 (Figure 6.3) for the syntheses of other epothilones and their derivatives were also prepared by the aldolase antibody-catalyzed kinetic resolution [22]. Other syntheses of natural products have capitalized on the 38C2catalyzed aldol addition of hydroxyacetone to install 1,2-syn-diol functionality. Aldolase antibody 38C2 was also used for synthesis of brevicomins 59– 61 (Scheme 6.7) [23] and 1-deoxy-l-xylulose (62) (Scheme 6.8) [24]. Antibody 38C2-catalyzed kinetic resolution of a tertiary aldol was used for the synthesis of (þ)-frontalin (63) (Scheme 6.9) [10]. 6.3.6
Retro-aldol Reactions in Human Therapy : Prodrug Activation by Aldolase Antibody
An important application of aldolase antibodies is prodrug activation in chemotherapeutic strategies. Activation of a prodrug into an active drug at the tumor site enables selective destruction of those tumor cells. This type of site-specific targeting is known as antibody-directed enzyme prodrug therapy (ADEPT) [25]. The ADEPT complex serves two functions. The antibody portion of the complex enables delivery of the drug directly to the tu-
291
6 Antibody-catalyzed Aldol Reactions
292
O OH
O
38C2 O
O
CHO
55%, >99% ee
OH O
O
O
+ HO O
O O
60
OH O O
OH 38C2
O
O 59
OH
CHO
O
HO
O
O
OH
>99% ee
O O
HO
O
+ O
61
O
HO Scheme 6.7
Syntheses of brevicomins using aldolase antibody-catalyzed reactions.
O OH O O
H2 Pd(OH)2/C
OH O
38C2
OH HO
O
H 32%, 97% ee
OH
O
OH
1-Deoxy-L-xylulose (62) Scheme 6.8
Synthesis of 1-deoxy-l-xylulose using aldolase antibody-catalyzed reaction.
mor by recognition of antigen on the tumor cell surfaces. The enzyme part of the conjugate catalyzes the prodrug activation reaction at the tumor site. This system enhances the efficiency of anti-cancer drugs and reduces peripheral cytotoxicity because of the prodrug’s low toxicity. Most ADEPT sysOH O O
H
AcNH
44%, >99% ee (~50% conversion)
O OH
PO(OEt)2 O
LiOH
OH O
38C2 O
H
AcNH O
O H2 Pd(OH)2/C
AcNH Scheme 6.9
Synthesis of (þ)-frontalin using aldolase antibody-catalyzed reaction.
O (+)-Frontalin (63)
6.4 Aldolase Antibodies for Reactions Related to an Enamine Mechanism
tems incorporate a bacterial enzyme, and the problems of this system are: (1) identification of an enzyme not already present in humans, and (2) the immunogenicity of such a bacterial enzyme. These problems can be circumvented by use of a humanized catalytic antibody which catalyzes the activation reaction of the prodrug selectively, in place of the foreign enzyme [26]. Immunogenicity of the enzyme component of ADEPT can therefore be solved using humanized catalytic antibodies. Antibody 38C2 catalyzes the activation reactions of prodrugs that incorporate a trigger portion designed to be released by sequential retro-aldolretro-Michael reactions (Scheme 6.10) [27, 28]. The retro-Michael step is also catalyzed by antibody 38C2, although this step occurs spontaneously in buffer. Because the retro-aldol reaction of the tertiary aldol in this reaction cascade is not catalyzed by any known natural enzymes, this masking of the anti-cancer drugs substantially reduces their toxicity. Combination of doxorubicin-prodrug 64 and antibody 38C2 strongly inhibited cell growth of cancer cell lines, whereas the same concentration of 64 alone was far less potent [27]. Camptothecin- and etoposide-prodrugs 65 and 66 were also activated by 38C2. The aldolase antibody-prodrug system has also proven to be efficient in an animal model of cancer [28]. Incorporation of an additional 8.4-A˚ linker, as shown in prodrugs 65 and 66, enables a diverse group of drugs to be used for application of aldolase antibody-catalyzed prodrug activation. Aldolase antibody 33F12 has an active site lysine e-amino group at @10 A˚ depth in a narrow pocket (Section 6.6). The reaction sites of the masking linkers of 65 and 66 reach into the active site whereas the bulky drug molecules remain outside the active-site cavity. The prodrug activation strategy has also been demonstrated in the context of protein activation. Native insulin modified with aldol-terminated linkers at the primary amines crippled the biological activity of insulin (Scheme 6.11). The modified insulin was defective with regard to receptor binding and stimulation of glucose transport. Antibody 38C2 cleaved the linker, released insulin, and restored insulin activity in an animal model [29]. Antibody 38C2 was also used for the retro-aldol or retro-aldol-retro-Michael reactions of aldol functionality on dendrimers and polymers that have potential for drug encapsulation and delivery [30, 31].
6.4
Aldolase Antibodies for Reactions Related to an Enamine Mechanism and the Nucleophilic Lysine e-Amino Group
Because aldolase antibodies operate by an enamine mechanism, they also catalyze other reactions that proceed by a similar mechanism. For example, as described in the section on prodrug activation reactions, antibodies 38C2 and 33F12 catalyze b-elimination (retro-Michael) reactions (Section 6.3.6). These antibodies also catalyze decarboxylation of b-keto acids (Scheme 6.12)
293
N
OH
O
O
O
O
O
O
O
65
HO
N
66
8.4 Å
OCH3
O
O
O
O
64
O
O
OH
O
N O
HO
CO2
O
38C2
CO2
O
38C2
O
O
OH
OH
HOHN
O
O
N
O
O
O
O
O
N
N
O
OH
O
N
O
CH3O
Etoposide
OH
O
O
O
OCH3
O
O
NH
spontaneous
OH
O
O
O
CO2
O
38C2
CH3O
O
O
O O HO
OH
additional linker arm to enable efficient catalysis of drug release.
O
O
CH3O
HO
O
3.7 Å
O
38C2
O
O
N
O
OH
Prodrug activation via a tandem retro-aldolretro-Michael reaction catalyzed by antibody 38C2. Prodrugs 65 and 66 incorporate an
Scheme 6.10
N
O
HOHN
O
OH
O
CH3O
O
O
O O HO
CH3O
OH
O
O
OH O
OH
O N
N
O
O
OH
OH O
OH
O
Camptothecin
N
Doxorubicin
HO NH2
O
O
294
6 Antibody-catalyzed Aldol Reactions
6.4 Aldolase Antibodies for Reactions Related to an Enamine Mechanism
295
NH2 Insulin
H 2N
NH2 O2N
O
38C2 O
OH O O
O O
O
OH O
O
NH Insulin
N H
OH O
O
HN
OH O O
Scheme 6.11
Modification of insulin with retro-aldol-retroMichael linkers and its reactivation by aldolase antibody 38C2.
[32], allylic rearrangement of steroids (Scheme 6.13) [33], and deuteriumexchange reactions (Table 6.7) [34]. In the antibody 38C2-catalyzed decarboxylation of 67, incorporation of 18 O into product 68 was observed in the presence of H2 18 O, consistent with decarboxylation proceeding via an enamine intermediate [32]. Antibody 38C2 catalyzed deuterium-exchange reactions at the a-position of a variety of ketones and aldehydes (Table 6.7) [34]. Because aldehydes bearing a longer alkyl chain (bvaleraldehyde) were not substrates for the
O O N H
O
67
OH Lys Ab
H H2N Lys Ab
N O
O N H
O 18O
18
H2 O
O N H
68
Scheme 6.12
Antibody 38C2-catalyzed decarboxylation.
O–
Lys Ab
H
N+
CO2
N H
296
6 Antibody-catalyzed Aldol Reactions
38C2 O
O 38C2 O
O O
O 38C2
O
O
Scheme 6.13
Antibody 38C2-catalyzed allylic rearrangements.
38C2-catalyzed self-aldol reactions (Section 6.3.1), deuterium-exchanged aldehydes accumulated in the presence of 38C2 in D2 O. Aldolase antibodies can be covalently modified with cofactor derivatives at the active site lysine residue to enable catalysis of cofactor-dependent reactions [35, 36]. A variety of 1-acyl b-lactam derivatives formed the stable amide linkages to active site lysine, whereas 1,3-diketones bound reversibly (Scheme 6.14) [35]. Antibody 38C2 was modified with lactam 69, and the modified antibody catalyzed thiazolium-dependent decarboxylation of PhCOCOOH. Antibody 38C2 was also covalently modified with the succinic anhydride derivative bearing a bis-imidazole functionality that chelates Cu(II), and the modified antibody was used for Cu(II)-dependent ester hydrolysis [36]. The reactions of the active site lysine e-amino group of aldolase antibodies depend on the substrates – the catalytic lysine residue of antibody 38C2 did not react with polymer p-nitrophenyl ester [37]. An effect of metal-cofactors on antibody 38C2-catalyzed aldol reactions has also been reported [38]. The active site lysine e-amino group of antibody 38C2 also functioned as general base for the Kemp elimination [39]. Over the years, we have studied a wide-variety of enamine based chemistries using aldolase antibodies. Several key synthetic reactions have been explored using aldolase antibodies. These include investigation of antibodycatalyzed additions to imines, i.e. antibody-based Mannich reactions that operate through an enamine intermediate, and the analogous reaction with nitrostyrene-derived electrophiles (Michael reactions) and Diels–Alder reactions wherein the antibody either generates an enamine derived diene or activates a dienophile through an iminium intermediate. With the exception of the Michael reaction, only recently shown to proceed exclusively with a maleimide electrophile [40], all other reactions failed, presumably because of steric constraints imposed by what is otherwise a promiscuous active site. Significantly, these exploratory studies with catalytic antibodies set the stage
6.5 Concise Catalytic Assays for Aldolase Antibody-catalyzed Reactions Tab. 6.7
Antibody 38C2-catalyzed deuterium-exchange at the a-position. Substrate
kcat (minC1 )
O
kcat /kuncat
79
1.1 10 8
105
9.7 10 7
29.9
25
3.0 10 8
84.9
5
5.9 10 8
13.5
9.5 10 6
10.7
O
Km (mM)
9.7 3:5 ðCH2 Þ 0:6 ðCH3 Þ
O
O
O
0.95
O
19.0
0.7
27.6
0.6
H O H O
127
1
H O H
5.8
0.5
for application of these principles in the area of organocatalysis by our laboratory and former members of the laboratory familiar with these studies [41].
6.5
Concise Catalytic Assays for Aldolase Antibody-catalyzed Reactions
Spectroscopic or visible detection of antibody-catalyzed reactions enhances rapid characterization of catalysts on a small scale. Such detection systems are also useful for high-throughput screening for new aldolase antibody
297
298
6 Antibody-catalyzed Aldol Reactions
O
H2N Lys Ab
O
R
O
H
N
Lys Ab
R
R
O
O
O O H2N Lys Ab
N
Lys Ab R
N H
N H
O O
N S + Br –
N 69 Scheme 6.14
Cofactor introduction at a unique active site lysine of aldolase antibodies.
catalysts and for evolution of aldolase antibodies in vitro. Examples of substrates for spectroscopic or visible detection of the antibody-catalyzed reactions are shown in Scheme 6.15. Substrate 47 was the first UV–visible-active aldol substrate designed for following retro-aldol reactions. Reaction results in liberation of the yellow product 70 [9] and this reagent served as the basis for the development of fluorescent versions when fluorescent aldehydes and ketones were later identified [42]. Substrates 35, 36, 71, and 72 liberate the fluorescent products 73, 74, 75, and 76, respectively, by aldolase antibodycatalyzed retro-aldol reaction [42]. Thus the progress of the reactions with these fluorogenic substrates can be followed by fluorescence. Substrates 77– 79 are used for analysis of retro-aldol-retro-Michael reactions. Substrates 77 and 78 generate fluorescent compounds resolufin (80) and umbelliferone (81), respectively, after the reactions [42, 43]. Substrate 79 generates a 2naphthol derivative 82 that forms a visible colored azo dye with diazonium salts [44]. Maleimide derivative 83 is useful for detection of the carbon– carbon bond-formation catalyzed by aldolase antibodies [40]. It should be noted that all the other systems monitor carbon–carbon bond cleavage, not formation. The reaction of 83 with acetone provides 84, the fluorescence of which is much greater than that of 83.
6.6
Structures of Aldolase Antibodies and Reaction Mechanism of Nucleophilic Lysine e-Amino Group
Antibodies 38C2 and 33F12, generated with diketone 1, are highly homologous with regard to sequence and have an essential lysine catalytic residue at the same position (H93) [11, 45]. Aldolase antibodies 40F12 and 42F1, generated with hapten 5, have the same enantio-preference as antibodies 38C2 and 33F12. They are also highly similar to 38C2 and 33F12 in their
O
OH O
N
N
47
H
fluorescence
λex 330 nm, λem 452 nm
fluorescence
λex 330 nm, λem 452 nm
fluorescence
λex 364 nm, λem 531 nm
MeO
fluorescence
λex 364 nm, λem 531 nm
73 O
OH O
MeO
36
74 O
OH O
H N
71
N
75 O
OH O
N
N
72
N O
76
N
OH O O
O
λmax 400 nm
O
35
MeO
UV/VIS
70
OH O
MeO
H
O
N
O O
O
O fluorescence
OH
O 80
77
λex 544 nm, λem 590 nm
OH O λex 360 nm, λem 460 nm
fluorescence O
O
O
O
O
78
OH 81
Br
CH3 N2 Br O
HO
1/2 ZnCl2
Br Cl
OH O
+Cl-
HO
N N CH3
82
79
Cl bright red dye precipitate O
H N
N N
+
O
O
H N
N N
83
O
84 fluorescence
O
O
λex 315 nm, λem 365 nm
Scheme 6.15
Substrates for fluorescent and visible detection of aldolase antibody-catalyzed reactions.
300
6 Antibody-catalyzed Aldol Reactions
amino acid sequences and have an essential lysine catalytic residue at the same position (H93) [16]. On the other hand, aldolase antibodies 93F3 and 84G3, generated with hapten 5, have antipodal reactivity to antibodies 38C2 and 33F12 and have different amino acid sequences from antibodies 38C2, 33F12, 40F12, and 42F12. The essential lysine residue is at position L89. X-ray crystal structures of the Fab fragments of 33F12 [11] and 93F3 [1d] are shown for comparison in Figures 6.4 and 6.5.
(a)
(b)
Fig. 6.4
X-ray structure of aldolase antibody 33F12. (a) Top view. Residues within 5 A˚ of the eamino group of the catalytic lysine (H93) are indicated. (b) Side view.
6.6 Structures of Aldolase Antibodies
Fig. 6.5
X-ray structure of aldolase antibody 93F3. The essential lysine residue (L89) is indicated.
The structure of 33F12 shows that the entrance of the antigen binding site of 33F12 is a narrow elongated cleft. The binding pocket is more than 11 A˚ deep and is comparable with combining sites of antibodies raised against other small haptenic molecules. At the bottom of the pocket LysH93 is found within a hydrophobic environment. Within this pocket, only one charged residue is within an 8-A˚ radius of the nitrogen of e-amino group of LysH93. No salt bridges or hydrogen bonds can be formed between LysH93 and any other residues in 33F12. A Hansch plot, a study of the free energy relationship for substrate partitioning into n-octanol and kcat =Km of the retro-aldol reactions, shows that the active site in 33F12 is 1.1 times more hydrophobic than n-octanol [11]. This environment perturbs the pK a of LysH93 and enables it to exist in its uncharged form, facilitating its function as a strong nucleophile. The hydrophobic environment used by these aldolase antibodies to tune the pK a of the e-amino group of the active site lysine residue is in contrast with the mechanism used by most natural class I aldolase enzymes; in the natural aldolases an electrostatic mechanism perturbs the pK a of the e-amino group of the lysine [2, 16, 46]. Notably, with the exception of a single residue, the residues in van der Waals contact with LysH93 are conserved in both antibodies and are encoded in the germline gene segments used by these antibodies. This conservation suggests that LysH93 appeared early in the process of antibody evolution in a germline antibody. The insertion of this residue into this hydrophobic microenvironment resulted in chemical reactivity that was efficient enough to be selected. Once this covalent process appeared the
301
302
6 Antibody-catalyzed Aldol Reactions
binding pocket did not further evolve toward high specificity as would be indicated by the selection of somatic variants of the germline sequence. The broad substrate specificity of aldolase antibodies prepared by reactive immunization is likely to be the result of the special ontogeny of antibodies induced by immunogens that form covalent bonds within the binding pocket during the induction. Although all aldolase antibodies generated with 1,3-diketones use an enamine mechanism in their aldol and retro-aldol reactions, the micromechanisms of the reactions might differ among these aldolase antibodies as they do among aldolase enzymes [2, 47]. In the 38C2-catalyzed retro-aldol reactions of a series of aldols prepared from acetone and p-substituted cinnamaldehyde, correlation between log kcat and the Hammett substituent s is not linear [13, 48]. A positive linear correlation between log kcat and s was, on the other hand, obtained for aldolase antibody 24H6, generated with a mixture of haptens 6 and 7; this indicates 38C2 and 24H6 differ in their micromechanisms, including the rate-limiting steps. However, similar amino acid sequences of the aldolase antibodies reflect the broad similarity in substrate specificity, enantioselectivity, and micromechanism.
6.7
Evolution of Aldolase Antibodies In Vitro
Although aldolase antibodies are broad in scope, the efficiency with which any given aldol is processed can vary significantly. To create aldolase antibodies with altered substrate specificity and turnover, phage libraries were screened using different diketone derivatives [49]. In this approach, libraries were prepared by recombining the catalytic machinery of well-characterized aldolase antibodies with a naive V gene repertoire. In vitro selection systems enabled the use of multiple haptens without animal re-immunization and enabled the experimenter to combine insights gained by the study of existing catalytic antibodies with the diversity of the immune repertoire. This strategy was used to prepare catalysts that would efficiently process cyclohexanone-aldols 85, because retro-aldol reactions of 85 were relatively slow compared with those involving acetone-aldols using existing aldolase antibodies 38C2 and 33F12 (Scheme 6.16). The phage libraries [50] prepared by combination of active site residues of 38C2 and 33F12 with a naive V gene repertoire were selected with 86 and 1 as reactants. Fab 28 obtained from this selection catalyzed the retro-aldol reactions of anti-87, syn-87, and 35. The kcat values of Fab 28 were superior to those of parental antibodies for cyclohexanone-aldols anti-87 and syn-87 by approximately three- to tenfold [49]. In addition, Fab 28 catalyzed the reaction of acetone-aldol 35 with a kcat value similar to that of antibody 33F12. The stereochemistries of the preferred substrate enantiomers of Fab 28 were the same as those of the parental antibodies 38C2 and 33F12. On the basis of on the design of
6.6 Structures of Aldolase Antibodies O
OH
303
O retro-aldol
R
+ RCHO
85 O
O
O O
O
OH
O
O
N H
86
N H
O
carrier
OH
O
O
O
OMe 35
O Ph
Ph 88
N H
OH
OMe syn-87
O
N H
1
OMe anti-87 O
O
89
Scheme 6.16
Reactions and compounds for in vitro evolution of aldolase antibodies.
the library, Fab 28 retained specific sequence elements of the parental antibodies and the essential LysH93 of the catalytic mechanism. The remaining primary sequence of Fab 28 is not related to the parental antibodies. In addition, because a naive V gene library was generated using human bone marrow cDNA, Fab 28 is a human aldolase antibody. This strategy will be useful for providing human antibodies for catalytic antibodymediated prodrug activation described in Section 6.3.6 without the need for re-immunization and selection. A correlation was observed between the kcat of the antibody-catalyzed retro-aldol reaction and the apparent K d of the corresponding diketones (i.e. the reactivity to the diketones) within the family of aldolase antibodies 38C2, 33F12, Fab 28, and antibodies selected with Fab 28 in vitro. Stronger binding (lower K d value) to acetone-diketone 88 (i.e. higher reactivity with acetone-diketone 88) correlated with a higher kcat value for the reaction of acetone-aldol 35, and stronger binding to cyclohexanone-diketone 89 correlated with a higher kcat value for the reaction of cyclohexanone-aldol anti87 (Figure 6.6) [51]. Selection using a structure-altered diketone provided catalytic antibodies that had altered substrate specificity as directed by the structure of the selecting diketone. The correlation indicates that antibodies 38C2, 33F12, and the in vitro evolved aldolase antibodies share a similar micromechanism including the rate-limiting step in their catalyzed reactions. 1,3-Diketones have also been used for phage selections of small peptides that catalyze aldol and retro-aldol reactions via an enamine mecha-
carrier
304
6 Antibody-catalyzed Aldol Reactions
10
1
1 Fab 28 33F12
0.1
0.1
Fab 9 Fab 22 L87Phe
Fab 28
Fab 22 L87Phe
kcat (min-1)
kcat (min-1)
38C2
0.01
38C2
Fab 9
33F12
Fab 3
0.01
Fab 3
0.001 Fab 10
0.001
0.0001 0.1
1
(a)
10
100
0.1
1
(b)
K d (µM)
10
100
K d (µM)
Fig. 6.6
(a) Plot of k cat for the retro-aldol reaction of 35 against K d of diketone 88. (b) Plot of k cat for the retro-aldol reaction of anti-87 versus K d of diketone 89.
nism [52]. Selection with 1,3-diketones seems to be a general and effective route to catalysts that operate via an enamine mechanism. Although in vitro selection strategies using 1,3-diketones can be used to obtain access to aldolase antibodies, direct selection of catalysis resulted in improved catalysts. Fluorogenic and chromogenic substrates described in Section 6.5 might be useful for the catalytic selection. Genetic selection is also useful for the selection of catalysts. Antibody-catalyzed reaction of substrate 90, a prodrug, generates p-aminobenzoic acid (PABA), an essential metabolite for E. coli. When an E. coli strain that cannot synthesize PABA, because of a genetic defect was provided with the gene for an aldolase antibody, expression of the aldolase antibody provided the E. coli with the ability to metabolize 90 and survive. Such a genetic selection has been shown in preliminary experiments to provide a growth advantage to a strain expressing aldolase antibody 38C2 (Scheme 6.17) [53]. Ideally, such a system will be used in the future to rapidly evolve aldolase antibodies based on both turnover efficiency and substrate specificity.
O HO CH3 O 90
COOH
COOH
O N H
H2N O
PABA
O CO2
Scheme 6.17
Reaction for genetic selection of aldolase antibodies.
6.9 Summary and Conclusion
305
O N H
linker
N+ H N
OH
O 91
H2 N
H N
O O H +
O
94 O
OH O
OH O
72D4 N H
92
N H
93
Scheme 6.18
Antibody-catalyzed reaction using cofactor primary amine.
6.8
Cofactor-mediated Antibody-catalyzed Aldol and/or Retro-aldol Reactions
Antibody 72D4, generated by immunization with 91, catalyzed the aldol reaction of acetone and aldehyde 92 and the retro-aldol reaction of 93, with some enantioselectivity, in the presence of a primary amine cofactor 94 (Scheme 6.18) [54]. The antibody did not catalyze the reactions in the absence amine 94, and evidence supported an enamine mechanism (enamine formation with 94) for this cofactor amine-mediated antibody-catalyzed reaction. An antibody that mimics threonine aldolase, which uses pyridoxal as the cofactor to catalyze the aldol reaction of glycine with aldehydes, has also been reported. Antibody 10H2 catalyzed the retro-aldol reaction of bhydroxy-a-amino acid in the presence of pyridoxal [55].
6.9
Summary and Conclusion
Class I aldolases function as Nature’s most fundamental carbon–carbon bond forming enzymes. Designer catalysts – aldolase antibodies – that mimic the aldolases have been created by using a reaction-based selection strategy with 1,3-diketones. The covalent reaction mechanism is a fundamental part of the selection. Broad scope, enhanced catalytic activity, and defined chemical mechanism are three features of these aldolase antibodies that distinguish them from traditional antibody catalysts. The substrate specificities of aldolase antibodies are different from those of naturally existing
306
6 Antibody-catalyzed Aldol Reactions
enzymes. Thus, applications of aldolase antibody-catalyzed reactions are very wide, from asymmetric synthesis to chemical transformations in cancer therapy [56, 57].
6.10
Experimental Procedures
Aldolase antibodies 38C2 and 84G3 are commercially available from Aldrich. Example 1. Kinetic Resolution in a Biphasic System [20]. A solution of antibody 84G3 (500 mg, 6.67 mmol active site, 0.0086 mol%) in phosphate buffered saline (PBS; pH 7.4, 87.5 mL) at room temperature was added to a solution of (G)-45 (20 g, 77.4 mmol) in toluene (600 mL) in a Teflon tube. The mixture was shaken at 250 rpm. under argon at the same temperature and the ee was monitored by chiral-phase HPLC. When ee > 99% was reached (65 h) the mixture was cooled to 20 C for several hours to enable the aqueous phase to freeze. The organic phase was decanted. The frozen aqueous phase was left to thaw and extracted with toluene (3 3 vol. equiv.) and 1:1 EtOAc–toluene (3 3 vol. equiv.). The combined organic phase was dried over Na2 SO4 , concentrated in vacuo, and purified by silica gel column chromatography (1:3 EtOAc–hexane) to afford (S)-45 (10 g, 50%). Example 2. Kinetic Resolution [22]. A solution of antibody 84G3 (0.34 g, 0.00227 mmol) in PBS (27.2 mL) was added to a degassed solution of (G)-51 (16.8 g, 75 mmol) in PBS (1.55 L)–CH3 CN (140 mL). The mixture was incubated under an argon atmosphere at 37 C for 5 days. After consumption of more than 98% of one enantiomer, as judged by HPLC analysis, the mixture was dialyzed using Amicon membranes to recover the antibody and the filtrate was passed through a reversed-phase column (C18 ). The column was first washed with water and then the desired compounds were eluted with MeOH. The solvents were removed under vacuum and the residue was purified by silica gel column chromatography (EtOAc–hexanes, 9:1 to 2:1) to afford ()-51 (7.6 g, 45%, >98% ee). Example 3. Aldol Reaction [8]. Antibody 38C2 (120 mm in PBS, 8.0 mL) was added at room temperature to a mixture of 11 (110 mg, 0.61 mmol) in DMF (15 mL), acetone (31 mL), and degassed PBS (571 mL). The final concentrations were: 11, 1.0 mm; 38C2, 1.9 mm; and acetone, 5% (v/v). The reaction mixture was kept under argon at room temperature in the dark for 7 days. The reaction mixture was saturated with NaCl and extracted with EtOAc (3 150 mL). The organic phase was dried over MgSO4 , concentrated in vacuo, and purified by silica gel column chromatography (EtOAc–hexane, 1:2) to afford (S)-21 (96 mg, 67%, 91% ee).
References
Acknowledgments
We would like to thank Richard A. Lerner, our long-term collaborator in the aldolase antibody projects performed at the Scripps Research Institute, for his contributions.
References 1 (a) Schultz, P. G.; Lerner, R. A. Science 1995, 269, 1835.
2
3 4 5 6 7
8
9
10
11
12
(b) Hilvert, D. Annu. Rev. Biochem. 2000, 69, 751. (c) Blackburn, G. M., Garcon, A., Catalytic antibodies. In Kelly, D. R. Ed. Biotechnology vol. 8b, Biotechnology Biotransformations II; Wiley–VCH: Weinheim, 2000; p. 403. (d) Schultz, P. G.; Yin, J.; Lerner, R. A. Angew. Chem. Int. Ed. 2002, 41, 4427. (e) Tanaka, F. Chem. Rev. 2002, 102, 4885. (a) Lai, C. Y.; Nakai, N.; Chang, D. Science 1974, 183, 1204. (b) Morris, A. J.; Tolan, D. R. Biochemistry 1994, 33, 12291. (c) Choi, K. H.; Shi, J.; Hopkins, C. E.; Tolan, D. R.; Allen, K. N. Biochemistry 2001, 40, 13868. Allard, J.; Grochulski, P.; Sygusch, J. Proc. Natl. Acad. Sci. U.S.A. 2001, 98, 3679. Heine, A.; DeSantis, G.; Luz, J. G.; Mitchell, M.; Wong, C.-H.; Wilson, I. A. Science 2001, 294, 369. Lide, D. R. Ed. CRC Handbook of Chemistry and Physics 83rd Edition; CRC Press: New York, 2002, p. 7-1. Wagner, J.; Lerner, R. A.; Barbas, C. F., III Science 1995, 270, 1797. Wirshing, P.; Ashley, J. A.; Lo, C.-H. L.; Janda, K. D.; Lerner, R. A. Science 1995, 270, 1775. Tagaki, W.; Guthrie, J. P.; Westheimer, F. H. Biochemistry 1968, 7, 905. Gilbert, H. F., III; O’Leary, M. H. Biochemistry 1975, 14, 5194. Gilbert, H. F., III; O’Leary, M. H. Biochem. Biophys. Acta 1977, 483, 79. Otwell, H. B.; Cipollo, K. L.; Dunlap, R. B. Biochem. Biophys. Acta 1979, 568, 297. Guidinger, P. F.; Nowak, T. Biochemistry 1991, 30, 8851. Hoffmann, T.; Zhong, G.; List, B.; Shabat, D.; Anderson, J.; Gramatikova, S.; Lerner, R. A.; Barbas, C. F., III J. Am. Chem. Soc. 1998, 120, 2768. Zhong, G.; Shabat, D.; List, B.; Anderson, J.; Sinha, R. A.; Lerner, R. A.; Barbas, C. F., III Angew. Chem., Int. Ed. 1998, 37, 2481. List, B.; Shabat, D.; Zhong, G.; Turner, J. M.; Li, A.; Bui, T.; Anderson, J.; Lerner, R. A.; Barbas, C. F., III J. Am. Chem. Soc. 1999, 121, 7283. Barbas, C. F., III; Heine, A.; Zhong, G.; Hoffmann, T.; Gramatikova, S.; Bjornestsdt, R.; List, B.; Anderson, J.; Stura, E. A.; Wilson, I. A.; Lerner, R. A. Science 1997, 278, 2085. Zhong, G.; Lerner, R. A.; Barbas, C. F., III Angew. Chem. Int. Ed. 1999, 38, 3738.
307
308
6 Antibody-catalyzed Aldol Reactions 13 Shulman, H.; Makarov, C.; Ogawa, A. K.; Romesberg, F.;
Keinan, E. J. Am. Chem. Soc. 2000, 122, 10743. 14 Fujii, I.; Tanaka, F.; Miyashita, H.; Tanimura, R.;
15
16
17 18 19
20 21 22
23 24 25 26
27 28
29
30
Kinoshita, K. J. Am. Chem. Soc. 1995, 117, 6199. Tanaka, F.; Kinoshita, K.; Tanimura, R.; Fujii, I. J. Am. Chem. Soc. 1996, 118, 2332. Patten, P. A.; Gray, N. S.; Yang, P. L.; Marks, C. B.; Wedemayer, G. J.; Boniface, J. J.; Stevens, R. C.; Schultz, P. G. Science, 1996, 271, 1086. Wedemayer, G. J.; Pattern, P. A.; Wang, L. H.; Schultz, P. G.; Stevens, R. C. Science 1997, 276, 1665. Yin, J.; Mundorff, E. C.; Yang, P. L.; Wendt, K. U.; Hanway, D.; Stevens, R. C.; Schultz, P. G. Biochemistry 2001, 40, 10764. Zhong, G.; Hoffmann, T.; Lerner, R. A.; Danishefsky, S.; Barbas, C. F., III J. Am. Chem. Soc. 1997, 119, 8131. List, B.; Lerner, R. A.; Barbas, C. F., III Org. Lett. 1999, 1, 59 and 353. Karlstrom, A.; Zhong, G.; Rader, C.; Larsen, N. A.; Heine, A.; Fuller, R.; List, B.; Tanaka, F.; Wilson, I. A.; Barbas, C. F., III; Lerner, R. A. Proc. Natl. Acad. Sci. U.S.A. 2000, 97, 3878. Guthrie, J. P.; Cossar, J.; Taylor, K. F. Can. J. Chem. 1984, 62, 1958. Guthrie, J. P.; Wang, X.-P. Can. J. Chem. 1992, 70, 1055. Maggiotti, V.; Resmini, M.; Gouverneur, V. Angew. Chem. Int. Ed. 2002, 41, 1012. Maggiotti, V.; Wong, J.-B.; Razet, R.; Cowley, A. R.; Gouverneur, V. Tetrahedron: Asymmetry 2002, 13, 1789. Turner, J. M.; Bui, T.; Lerner, R. A.; Barbas, C. F., III; List, B. Chem. Eur. J. 2000, 6, 2772. Sinha, S.; Barbas, C. F., III; Lerner, R. A. Proc. Natl. Acad. Sci. U.S.A. 1998, 95, 14603. Sinha, S.; Sun, J.; Miller, G.; Barbas, C. F., III; Lerner, R. A. Org. Lett. 1999, 1, 1623. Shinha, S. C.; Sun, J.; Miller, G. P.; Wartmann, M.; Lerner, R. A. Chem. Eur. J. 2001, 7, 1691. List, B., Shabat, D., Barbas III, C. F., and Lerner, R. A. Chem. Eur. J. 1998, 4, 881. Shabat, D.; List, B.; Lerner, R. A.; Barbas, C. F., III Tetrahedron Lett. 1999, 40, 1437. Niculesco-Duvanz, I.; Springer, C. J. Adv. Drug Delivery Rev. 1997, 26, 151. Wenthworth, P.; Datta, A.; Blakey, D.; Boyle, T.; Partridge, L. J.; Blackburn, G. M. Proc. Natl. Acad. Sci. U.S.A. 1996, 93, 799. Shabat, D.; Rader, C.; List, B.; Lerner, R. A.; Barbas, C. F., III Proc. Natl. Acad. Sci. U.S.A. 1999, 96, 6925. Shabat, D.; Lode, H. N.; Pertl, U.; Reisfeld, R. A.; Rader, C.; Lerner, R. A.; Barbas, C. F., III Proc. Natl. Acad. Sci. U.S.A. 2001, 98, 7528. Worrall, D. S.; McDunn, J. E.; List, B.; Reichart, D.; Hevener, A.; Gustafson, T.; Barbas, C. F., III; Lerner, R. A.; Olefsky, J. M. Proc. Natl. Acad. Sci. U.S.A. 2001, 98, 13514. Cordova, A.; Janda, K. D. J. Am. Chem. Soc. 2001, 123, 8248.
References 31 Gopin, A.; Pessah, N.; Shamis, M.; Rader, C.; Shabat, D.
Angew. Chem. Int. Ed. 2003, 42, 327. 32 Bjornestedt, R.; Zhong, G.; Lerner, R. A.; Barbas, C. F., III
J. Am. Chem. Soc. 1996, 118, 11720. 33 Lin, C.-H.; Hoffman, T. Z.; Wirshing, P.; Barbas, C. F., III;
34 35 36
37 38 39 40 41
42 43
44 45
46 47
48 49 50
51 52
Janda, K. D.; Lerner, R. A. Proc. Natl. Acad. Sci. U.S.A. 1997, 94, 11773. Shulman, A.; Sitry, D.; Shulman, H.; Keinan, E. Chem. Eur. J. 2002, 8, 229. Tanaka, F.; Lerner, R. A.; Barbas, C. F., III Chem. Commun. 1999, 1383. Nicholas, K. M.; Wentworth, P. Jr.; Harwig, C. W.; Wentworth, A. D.; Shafton, A.; Janda, K. D. Proc. Natl. Acad. Sci. U.S.A. 2002, 99, 2648. Satchi-Fainaro, R.; Wrasidlo, W.; Lode, H. N.; Shabat, D. Bioorg. Med. Chem. 2002, 10, 3023. Finn, M. G.; Lerner, R. A.; Barbas, C. F., III J. Am. Chem. Soc. 1998, 120, 2963. James, L. C.; Tawfik, D. S. Protein Science 2001, 10, 2600. Tanaka, F.; Thayumanavan, R.; Barbas, C. F., III J. Am. Chem. Soc. 2003, 125, 8523. Sakthivel, K.; Notz, W.; Bui, T.; Barbas, C. F., III J. Am. Chem. Soc. 2001, 123, 5260. Cordova, A.; Watanabe, S.; Tanaka, F.; Notz, W.; Barbas, C. F., III J. Am. Chem. Soc. 2002, 124, 1866. Pidathala, C.; Hoang, L.; Vignola, N.; List, B. Angew. Chem. Int. Ed. 2003, 42, 2785. List, B.; Barbas, C. F., III; Lerner, R. A. Proc. Natl. Sci. Acad. U.S.A. 1998, 95, 15351. Jourdain, N.; Carlon, R. P.; Reymond, J.-L. Tetrahedron Lett. 1998, 39, 9415. Carlon, R. P.; Jourdain, N.; Reymond, J.-L. Chem. Eur. J. 2000, 6, 4154. Tanaka, F.; Kerwin, L.; Kubitz, D.; Lerner, R. A.; Barbas, C. F., III Bioorg. Med. Chem. Lett. 2001, 11, 2983. The GenBank accession numbers are following: 33F12 VL, AF242212; 33F12 VH, AF242213; 38C2 VL, AF242214; 38C2 VH, AF242215; 40F12 VL, AF242216; 40F12 VH, AF242217; 42F1 VL, AF242218; 42F1 VH, AF242219. Westheimer, F. H. Tetrahedron 1995, 51, 3. Littlechild, J. A.; Watson, H. C. Trends Biochem. Sci. 1993, 18, 36. Morris, A. J.; Davenport, R. C.; Tolan, D. R. Protein Engineering 1996, 9, 61. Shulman, H.; Keinan, E. Bioorg. Med. Chem. Lett. 1999, 9, 1745. Tanaka, F.; Lerner, R. A.; Barbas, C. F., III J. Am. Chem. Soc. 2000, 122, 4835. Barbas III, C. F., Burton, D. R., Scott, J. K., and Silverman, G. J. Eds. Phage Display: A Laboratory Manual. Cold Spring Harbor Laboratory Press, Cold Spring Harbor, New York, 2001. Tanaka, F.; Fuller, R.; Shim, H.; Lerner, R. A.; Barbas, C. F., III J. Mol. Biol. 2004, 335, 1007. Tanaka, F.; Barbas, C. F., III Chem Commun. 2001, 769. Tanaka, F.; Barbas, C. F., III J. Am. Chem. Soc. 2002, 124, 3510.
309
310
6 Antibody-catalyzed Aldol Reactions 53 Gildersleeve, J.; Janes, J.; Ulrich, H.; Yang, P.; Turner, J.;
54
55 56 57
Barbas, C.; Schultz, P. Bioorg. Med. Chem. Lett. 2002, 12, 1691 and 2789. Reymond, J.-L.; Chen, Y. Tetrahedron Lett. 1995, 36, 2575. Reymond, J.-L.; Chen, Y. J. Org. Chem. 1995, 60, 6970. Reymond, J.-L. Angew. Chem. Int. Ed. 1995, 34, 2285. Tanaka, F.; Oda, M.; Fujii, I. Tetrahedron Lett. 1998, 39, 5057. Barbas, C. F., III; Rader, C.; Segal, D. J.; List, B.; Turner, J. M. Advances in Protein Chemistry 2001, 55, 317. Tanaka, F.; Barbas, C. F., III J. Immunol. Methods 2002, 269, 67.
311
7
The Aldol Reaction in Natural Product Synthesis: The Epothilone Story Dieter Schinzer Dedicated to Clayton H. Heathcock, one of the pioneers of modern aldol reactions who figured out many of the import stereochemical principles of this fascinating chemistry
7.1
History of Epothilones: Biological Source, Isolation, and Structural Elucidation
The epothilones, a new class of macrocyclic compounds which show cytotoxic activity, have been isolated as secondary metabolites by Ho¨fle and Reichenbach from myxo bacteria [1]. These are so-called gliding bacteria which cruise on slime tracks forming swarms. They grow preferentially on rodded material, like dung. Their morphogenetic potential is quite interesting, forming cylindrical vegetative cells, which under starvation conditions turn into fruiting bodies with solid walls, that further differentiate into myxo spores [2]. Besides the epothilones – which were isolated from a strain of Sorangium cellulosum – many other structural diverse natural products have been isolated from myxo bacteria [3].
7.2
History of Epothilones: The Total Synthesis Race
The publication of the structures of epothilone A and B in 1996 by Ho¨fle et al. [4] in connection with the biological data of the tubulin assay was of great interest for the chemical community. The epothilones were identified by the Merck group in 1995 as tubulin-polymerizing natural products as a single active structural type out of a compound library of more than 60.000 molecules [5]. The cytotoxic effect of Taxol2 via binding to tubulin and thus stabilizing the assembly, combined with the scope of its clinical application, prompted major activities around the world. Taxol2 is far from being an ideal drug: low water solubility requires formulation vehicles, such as Modern Aldol Reactions. Vol. 1: Enolates, Organocatalysis, Biocatalysis and Natural Product Synthesis. Edited by Rainer Mahrwald Copyright 8 2004 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim ISBN: 3-527-30714-1
312
7 The Aldol Reaction in Natural Product Synthesis: The Epothilone Story
Cremophore2 which create allergic side effects and other risks [6]. Two different types of resistance arise during cancer therapy with Taxol2 ; an overexpression of the P-glycoprotein (P-gp) efflux system and tubulin mutation which both cause major drawbacks. Furthermore, the remarkable efficacy of epothilone against MDR (multiple drug resistante) cell lines makes these compounds superior in comparison to known anticancer agents [7]. This started a race for the first total synthesis in which many world leading chemists got involved. In addition, biologists, medicinal chemists, and clinicians started many efforts along these lines. Besides various total syntheses, many partial solutions, a large variety of synthetic analogues have been synthesized and have created a tremendous number of publications and patent applications around the world [8]. Finally, different large (and small) pharmaceutical companies took over the project and started clinical trials of epothilones or of their synthetic analogues in order to replace Taxol2 as a therapeutic anticancer agent [9]. The first total synthesis was published by Danishefsky et al. [10], shortly followed by independent routes from Nicolaou et al. [11] and Schinzer et al. [12].
O S N
R 12
13 8
15
OH
7
O 1
3
5
OH
O
6
O
1 Scheme 7.1
Epothilone A: R¼H; epothilone B: R¼Me
7.2.1
Different Strategies with Aldol Reactions: The Danishefsky Synthesis of Epothilone A Relying on Intramolecular Aldol Reaction
The first total synthesis of epothilone A combines the two halves of the molecule via a B-alkyl Suzuki coupling [13] yielding the desired cyclization precursor. The critical cyclization was achieved by an intramolecular aldol reaction, utilizing KHMDS as base providing the natural configuration with a 6:1 ratio, 51% yield. The selectivity of the macro condensation was best at 78 C and work-up of the potassium alkoxide at 0 C. Protonation at lower temperature yielded in more of (R)-configured material. Under special conditions, even the (R)isomer predominated over the ‘‘natural’’ configuration. The reason for this surprising behavior is still unknown and under investigation.
7.2 History of Epothilones: The Total Synthesis Race
313
OTBS OTIPS
S
I
8
15
+
6
1. 9-BBN, THF, RT;
CH(OMe)2
7
N
PdCl2(dppf)2, CsCO3,
OAc
Ph3As, H2O, DMF; 71%
2
3
2. TsOH 3. KHMDS, THF, - 78 oC 51%
12
12
S
S
13
13
8 8
N 15
N
OTBS
15
7
O
5
O OK
O
5
1
6
3
1
3
OH
O
OTIPS
5
4 Scheme 7.2
First total synthesis of epothilone A by Danishefsky et al.
7.2.2
Different Strategies with Aldol Reactions: The Nicolaou Synthesis of Epothilone A Using an Unselective Aldol Reaction
The Nicolaou strategy is based on RCM [14] as the final ring closing step in order to establish the 16-membered macrolide. The linear subunit of C1aC12 was obtained by an intermolecular aldol reaction, in which an a-chiral aldehyde was coupled with an achiral enolate, yielding the desired aldol product as a 2:3 ratio of diastereomers 8 and 9. 2.3 eq. LDA, THF, - 78 oC
HO +
O
6
O
8
O
HO
7
+
O
O
OH
7
HO 6
O
8 Scheme 7.3
Model study for the total synthesis of epothilone A by Nicolaou et al.
O 9
OTBS
7
8
OH
6
OTIPS
7 The Aldol Reaction in Natural Product Synthesis: The Epothilone Story
314
2.3 eq. LDA, THF, - 78 oC
HO
3
+
O
8
OTBS O
O 7
10 HO
HO
7
3
O
OTBS O
+
8
6
O
OH
11
OTBS O
OH
12 S
1. EDC, 4-DMAP, 12 h; 52%
11 + 15
N
2. RuCl2(=CHPh)(PCy3)2, CH2Cl2, 20 h 79%
OH
13
12
S
13 8
N
15
OTBS
7
O 1
3
5 6
O
OTBS O 14
Scheme 7.4
Second total synthesis of epothilone A by Nicolaou et al.
This result is not surprising because only one chiral element was used in that reaction. A second chiral element should improve the selectivity. For that reason Nicolaou introduced a chiral enolate, which is shown in Scheme 7.4. In his second synthesis, Nicolaou used a chiral enolate of type 10 which contained the (S)-configuration at C3 and the required oxidation level at C1. However, again almost no selectivity was observed in the aldol coupling [15]. 7.2.3
Different Strategies with Aldol Reactions: The Schinzer Synthesis of Epothilone A with Complete Stereocontrol in the Aldol Reaction
The Schinzer synthesis of epothilone A is also based on a convergent strategy using three key fragments [16]. The 16-membered macrolide is closed via RCM to provide the key intermediate for the final epoxidation.
7.2 History of Epothilones: The Total Synthesis Race
S N olefin metathesis, OH
13
O
epoxidation 7 O
S
12
13 8
N
OH aldol reaction
O esterification
7
15 1
3
O 1
O
5
OH
O
O
O
6
15 Scheme 7.5
Third total synthesis of epothilone A by Schinzer et al.
As shown before, the major stereochemical issue in epothilone chemistry is the absolute stereocontrol of the triad C6aC7aC8. In the Schinzer synthesis, a six-membered chiral acetonide of type 15 containing the (S)configuration at C3 was used. Addition of a-chiral aldehyde 7 (X ¼ C) to the preformed enolate (generated with LDA in THF at 78 C) resulted in the formation of the (6R,7S)-diastereomer 16 as a the major isomer in ratio of 25:1 in 76% yield [17]. In a synthesis of oxa-epothilones, Schinzer used aldehyde 7 (X ¼ O) in a diastereoselective aldol reaction which exclusively yielded aldol product 16 (X ¼ O) [18]. Schinzer then performed the same reaction with a-chiral aldehyde 17. Remarkably, this reaction provided again a single isomer 18 with the ‘‘natural’’ epothilone configuration in 49% yield [19]. The fully functionalized aldehyde 19 from Schinzer’s epothilone B synthesis was also used in the same aldol process. However, a 10:1 mixture of diastereomers was obtained with the ‘‘correct’’ stereochemistry as the major product 20 [20]. In the meantime, Schinzer’s chiral enolate 15 has been used extensively by other groups in academia [21] and in the pharmaceutical industry to synthesize a large number of analogues [22]. Most of the examples with highly func-
315
316
7 The Aldol Reaction in Natural Product Synthesis: The Epothilone Story
X
3
+
O
O
6
O
O
O
3
LDA, THF, - 78 oC
8
15
O
7
X
7 8
OH
O 16
X = C; O 3
7
LDA, THF, - 78 oC
15
+
O
OTBS
8
O
O
O
8
OTBS
OH
18
17
S 15
6
LDA, THF, - 78 oC
8
+
15
N
O
OTBS 19
7
3 6
O
O
O
S
8 15
OH
N 20
OTBS
Scheme 7.6
Selective double stereodifferentiating aldol reactions
tionalized chiral aldehydes generated single isomers in high chemical yields. These outstanding results are connected to the nature of the acetonide, because the lithium counter ion attached to the enolate oxygen can chelate to one oxygen of the acetonide, as shown in Scheme 7.7. The chelated structure 21 was calculated with force field (MMþ) and quantum mechanics (PM3) methods, both methods showed minima in favor of the chelated enolate 21 [19]. Thus, with these results he was able to explain the stereochemical results. There are two aspects to understanding these remarkable observations. The simple diastereoselectivity of the aldol reaction can be explained based on Heathcock’s studies [23], in which the enolate geometry is governed by the bulkiness of the group next to the ketone (in the Schinzer case a modified tbutyl group bearing an extra oxygen). This should result in the generation of a (Z)-lithium enolate, further stabilized by the oxygen at C3, forming a
7.2 History of Epothilones: The Total Synthesis Race
LDA, THF, - 78 oC
3
3
R
+ O
O
O
O
O
O
Li
8
O
Z-Enolate
15
22
21
R
H O
O Li
7
3
H
O H
6
H O
S
O
O
O
R 8
OH
24
S
317
Zimmerman-Traxler TS
23 Scheme 7.7
Chelated nucleophile 21 with Zimmerman-Traxler TS.
rigid bicyclic structure 21. The diastereofacial selectivity to explain the stereochemical outcome in aldol condensations with a-chiral aldehydes was first proposed by Cram [24] and later on by Felkin [25]. Both models give the same products even though totally different reactive conformations are used. In Schinzer’s case, the aldol addition occurred with the opposite sense of diastereofacial addition to the theoretical models predicted. Intrigued by these results the Schinzer group decided to study this particular aldol reaction in detail. First, they conducted experiments with socalled simple aldehydes containing no chiral center to check the inherent selectivity of the chiral enolate. The reaction generated only the two syn-type diastereomeric aldol products 26 and 27, as shown in table 1 and no anti-
Tab. 7.1
Aldol reactions with achiral aldehydes R
26
:
27
Yield [%]
Ph Pr i-Pr t-Bu 1-Heptenyl
4 5 5 3 5
: : : : :
1 1 1 1 1
81 63 59 49 74
318
R 15 +
7 The Aldol Reaction in Natural Product Synthesis: The Epothilone Story
7
3
LDA, THF, - 78 oC
R
R
6
O
O
O
+
O
25
O
OH
O
O
26
OH
27
Scheme 7.8
Inherent selectivity of nucleophile 15
aldol product was observed at all. In all cases studied, the 6(R),7(S)-isomer 26 was the predominant diastereomer. The inherent selectivity of the chiral enolate is in the range of about 4:1 [26]. Next, the double-stereodifferentiating [27] aldol process with a-chiral aldehydes was examined, seperate experiments using both enantiomeric forms of phenyl propionaldehyde were undertaken. Use of (S)-phenylpropionaldehyde 28 gave two diastereomers 29 and 30 in a ratio of 2.5:1 and 68% yield. The major one is still the anti-Cram/Felkin compound 29, which is quite unusual because 28 usually provides high selectivity in favor of the Cram/ Felkin adduct 30 [28].
LDA, THF, - 78 oC
15 +
Ph
8
7
3 6
O
O
O
8
Ph
+
Ph
O
OH
O
O
OH
30
29
28
O
Scheme 7.9
Aldol reaction with (S)-phenylpropionaldehyde
This is a very good example where the inherent selectivity of the enolate overrides the inherent selectivity of the aldehyde with the 6(R),7(S)configuration resulting from double stereodifferentiation using the aldehyde with the (S)-configuration. On the other hand, the same reaction with (R)phenylpropionaldehyde 31 yielded two diastereomers 32 and 33 in a ratio of 40:1 and 77% yield as shown in Scheme 7.10 [26].
3
LDA, THF, - 78 oC
15 +
8
Ph
7 6
O
O
O
8
OH
Ph
+
Ph O
O
O
O 31
32
Scheme 7.10
Aldol reaction with (R)-phenylpropionaldehyde
33
OH
7.3 Model Study via Chelation Control in the Aldol Reaction by Kalesse
319
8
O
O
O
6
O
LDA, THF, - 78 oC
3
7
3
35
O
O
36
8
OH
O 7
3 6
34
O 8
O
Ph
O
O
8
OH 37
28
Scheme 7.11
Double stereodifferentiating aldol reactions with (R)-nucleophile 34
The major isomer was the Cram/Felkin product 32 with the 6(R),7(S),8(R)-configuration which clearly indicated that in the (S),(R)combination of chirality both effects work in the same direction and produce a matching case with very high selectivity. The same holds for the use of the (R)-enolate system as shown in Scheme 7.11 [26]. In contrast, a-chiral aldehydes of type 7 show the opposite behavior, favoring the anti-Cram/Felkin product as the major isomer. In these cases, the matched case is the (S),(S)- or (R),(R)-combination of chirality benefiting of both chiral elements. These correlation studies indicate a dominating influence of the chiral enolate 15 versus the chirality of the aldehyde. In the case of (S)-phenylpropionaldehyde 28 the chirality of enolate 15 overrides the directing effect of the aldehyde chirality, still producing a 2.5:1 ratio in favor of the 6(R),7(S),8(R)-stereochemical triad. The use of the (R)-phenylpropionaldehyde 31 forms exclusively the 6(R),7(S),8(R)-stereo chemical triad in a 40:1 ratio. In this case the matched pair is the (S)/(R)-combination of chirality. The (R)-enantiomer of the enolate reverses the stereochemical outcome. In connection with a synthesis of 6-desmethyl-epothilones Schinzer used methyl ketone 38 instead of the ethyl ketone 15 to study the influence of the missing methyl group. As seen in Scheme 7.12, the selectivity dropped to 1.7:1 still favoring diastereomer 39 with the (S)-configuration at C7 [29]. The lower selectivity can be easily explained by the lack of 1,3-diaxial interactions in the chair-like Zimmerman-Traxler transition state model [30].
7.3
Model Study via Chelation Control in the Aldol Reaction by Kalesse
Kalesse et al. [31] described an aldol reaction where a silyloxy protected ethyl ketone 41 is coupled to an b-oxa-aldehyde 41 based on Roche acid [32] (Scheme
Ph
320
7 The Aldol Reaction in Natural Product Synthesis: The Epothilone Story LDA, THF, - 78 oC 3
+
O
O
O
67%
7
38
3
7
+
8
O
8
O
O
O
O
OH
O
O
OH 40
39 Scheme 7.12
Double stereodifferentiating aldol reactions with methyl ketone 37
7.13). This is a very useful example in connection with the model studies to approach the epothilones. As a result of a chelation-controlled aldol reaction exclusive formation of compound 43 with the desired 6(R),7(S),8(R)-triad was observed. The structure has been confirmed by X-ray analysis after transformation to a crystalline six-membered lactone. In their macro-lactonizsation strategy to synthesize epothilone B Nicolaou et al. used the same ketone 41 in an aldol reaction with aldehyde 19. The diastereoselectivity in the aldol addition was only moderate, giving a ratio of 3:1 in favor of the ‘‘natural’’ epothilone configuration [33].
OBzl
3
+
LDA, THF, - 78 oC
8
O
OTBS OTBS O
42
41
3
OBzl
7 6
8
OH
OTBS OTBS O 43
Scheme 7.13
Chelation-controlled aldol reaction by Kalesse et al.
7.3.1
Different Aldol Strategies: Mulzer’s Total Syntheses of Epothilones B and D
A series of similar aldol reactions were carried out in Mulzer’s lab. In his study towards the total synthesis of epothilone B and D Mulzer et al. used first an achiral ethyl ketone of type 44 in an aldol reaction with the known (S)-aldehyde 45. In this particular case only the chiral element at 44 directed the addition giving a 4:1 mixture of diastereomers 46 and 47. The major di-
7.3 Model Study via Chelation Control in the Aldol Reaction by Kalesse
LDA, THF, - 78 oC
O
OPMB
7
OPMB +
321
8
6
8
+
OH
O
O
44
46
45
OPMB OH
O 47 Scheme 7.14
Chelation-controlled aldol reaction by Mulzer et al.
astereomer with the (R)-configuration at C6 and the (S)-configuration at C7 is formed as a result of a chelated Cram-type aldol reaction. In a later study Mulzer presented examples of double stereodifferentiating aldol reactions with (S)-C3 protected nucleophiles [35]. The same double TBSO-protected (S)-ethyl ketone 41 used before by Kalesse et al. gave 6:1 ratio in an aldol reaction with an a-(S)-chiral aldehyde 48 as a result of matching chirality (70% yield). Again, the major isomer 49 had the ‘‘natural’’ epothilone configuration at C6 and C7. A further modification of the nucleophile 50 yielded the almost exclusive formation (19:1; 92% yield) of the ‘‘correct’’ diastereomer 52 in the presence of the sensitive epoxide function [36]. Both examples shown in Schemes 7.15 and 7.16 are aldol reactions with
O O
S
3
12
+
15
N
OTBS OTBS O
O
OTBS 48
41
O 6
OTBS OTBS O
O
7
3
12
8
15
OH 49
LDA, THF, - 78 oC
8
OTBS
Scheme 7.15
Double stereodifferentiating aldol reactions by Mulzer et al.
S N
322
7 The Aldol Reaction in Natural Product Synthesis: The Epothilone Story
O S
3
13
+
LDA, THF, - 78 oC
8
O
15
N
OTBS O
12
OTBS 51
50
O
3
7 6
OTBS O
12
8
13 15
OH 52
S N
OTBS
Scheme 7.16
Double stereodifferentiating aldol reactions in the presence of the epoxide functionality by Mulzer et al.
(S)-chiral nucleophiles protected at C3. The stereochemical outcome can most likely be explained by the cyclic transition states discussed in Scheme 7.7. All types of nucleophiles protected at C3 show a predominant effect in driving the aldol reaction in the direction of favoring the anti-Cram/Felkin product. This characteristic seems to be independent of the nature of the aldehyde. The best selectivities were obtained with nucleophile 50 and even superior to that, nucleophile 15 protected as an acetonide. The final part of this chapter will focus on a special type of aldehyde where a long range effect improves the stereochemical outcome of the aldol reaction.
7.4
Long-range Structural Effects on the Stereochemistry of Aldol Reactions
In a study connected with an improved synthesis of epothilone B and deoxyepothilone F, Danishefsky et al. conducted aldol reactions with functionalized ethyl ketones and an g,d-unsaturated aldehyde. Two major studies were carried out in Danishefsky’s lab: One with an achiral system [37] and one with a chiral enolate bearing the correct oxidation level at C1 and a TBSprotected alcohol at C3 [38]. First, in a model study Danishefsky et al. investigated the reaction of a new type of enolate 53 with several aldehydes. The typical Cram/Felkindirecting (S)-phenyl-propionaldehyde 28 gave the expected all-syn orientated compound 54 (Scheme 7.17, 54/55 ¼ 11:1).
7.4 Long-range Structural Effects on the Stereochemistry of Aldol Reactions LDA, THF, - 78 oC
t-BuO +
O
OTES O
8
t-BuO
Ph
Ph O
O
53
OTES O
+
OH
54
28
t-BuO
323
7 6
O
OTES O
8
Ph
OH
55
Scheme 7.17
Model study from Danishefsky et al.
A quite interesting trend was observed with other a-chiral aldehydes. (S)Methyl pentane aldehyde 56 (R ¼ ethyl) behaved only slightly more selectively generating a diastereomeric mixture 57 and 58 of 1:1.3. Unsaturated groups improved the selectivity to about 1:2–1:5.5 (see Scheme 7.18). Danishefsky explained these results by a special long range effect connected to the distance between the formyl and the terminal olefin group via a nonbonding interaction of the carbonyl group of the enolate and the olefin group. The maximum effect can be obtained with a g,d-unsaturated aldehyde 56 (R ¼ allyl; 1:5.5).
t-BuO
R +
O
OTES O
7
OTES O
OTES O 57
R 8
6
O
R + O
56
t-BuO
t-BuO
8
O
53
LDA, THF, - 78 oC
OH
58 R = ethyl, Ph, allyl, dimethylvinyl, OBzl
Scheme 7.18
Aldol reactions of 53 with various aldehydes
In a further series of experiments Danishefsky employed chiral ketones of type 59. Both enantiomers were available with high optical purity and could be involved in investigations in the double stereodifferentiating aldol reaction. However, the lithium anion of 59 (R ¼ TBS) could not be effected in useful yield due to the sensitivity of the b-silyloxy system to elimination. The less basic titanium enolate of 59 gave mixtures of diastereomers in moderate yields. The stereochemical outcome of these reactions showed that the configuration at C3 rather than C8 had a larger effect on the newly
OH
324
7 The Aldol Reaction in Natural Product Synthesis: The Epothilone Story
t-BuO
LDA, THF, - 78 oC
3
+
O
OR
O
O 60
59
t-BuO
3
t-BuO
6
O
8
OR 61
O
7 8
OH
+ O
OR
O
OH
62
Scheme 7.19
Double stereodifferentiating aldol reaction by Danishefsky et al.
formed centers at C6 and C7. However, the selectivity of about 3.5:1 was quite low (even lower than the result shown in Scheme 7.18), indicating that neither of the enantiomers of 59 and 60 benefited from matching chirality. The difficulty in the lithium series of these aldol reactions caused Danishefsky to investigate the lithium dianion 59 (R ¼ H) as the nucleophile. Indeed, these reactions did not induce b-elimination and provided quite unexpected results with a high level of stereoselectivity [38]. When the lithium dianion of (S)-59 (R ¼ H) was treated with (S)-60 a 2:3 mixture of diastereomers 61 and 62 was obtained in 53% yield, corresponding to the (S)-configuration at C6 and the (R)-configuration at C7 as the major diastereomer. Thus, the major isomer 62 corresponded to the ‘‘unnatural’’ stereochemistry of the epothilones. The minor isomer presented the required ‘‘natural’’ configuration of the epothilones. When the same reaction was then performed with the lithium dianion of (R)-63 (R ¼ H) and the (S)-configurated aldehyde 60 it gave rise to a single diastereomer 64 that contained the ‘‘natural’’ configuration of the epothilones at C6 and C7. This is a result of the matching chirality of the two chiral reaction partners, but represented a major drawback because the center at C3 proved to be (R)configurated. Therefore, it could not be used as a precursor for epothilone syntheses without a troublesome inversion at C3. Despite that, these undesired results from the dianion aldol reactions can be used to understand some principles of the double stereodifferentiating reactions. The C3 protected series, such as Schinzer-type aldol reactions described before required the (S)-configuration at C3 to establish the (R)configuration at C6 and the (S)-configuration at C7 with a similar a-chiral (S)-aldehyde. The matching chirality in the protected series corresponds to the mismatched case in the unprotected series of these double stereodifferentiating aldol reactions. This disparity could be a result of different transition states. Danishefsky proposed five factors governing such aldol reactions: (i) the chair-like transition state leading to a syn-aldol, (ii) chelation of the lithium counter ion by the b-oxygen at C3, (iii) a syn-relationship of the a-proton of the aldehyde and the methyl group at C6 of the enolate, (iv) anti-attack of
7.4 Long-range Structural Effects on the Stereochemistry of Aldol Reactions 3
t-BuO
LDA, THF, - 78 oC +
O
OR
8
O
O 60
63
3
t-BuO
7 6
O
325
OR
8
OH
O
64 Scheme 7.20
Double stereodifferentiating aldol reaction by Danishefsky et al.
H R
O R
O Li O
R
H
O
Li
R
L Me
O Li O
R
O O Li O
O Li O H
H
(i) chair
(ii) chelation
(iii) avoid syn
(iv) aldehde
(v) pentenyl
pentane interactions
attacks anti to R
aldehyde effect
Scheme 7.21
Factors governing the aldol reaction
the aldehyde versus the large group of the enolate, and (v) the special g,dunsaturated aldehyde effect [38]. As a result of all these energy-lowering factors, Danishefsky came up with the following transition state model leading to 64 [38]. A final experiment was designed to check the possibility of an internal kinetic resolution. For this purpose, a racemic mixture of the nucleophile
Ot-Bu H O O
t-BuO
3
7 6
O Li O H
O
OR 64
65 Scheme 7.22
Transition state of Danishefsky-type aldol reaction
O
8
OH
326
7 The Aldol Reaction in Natural Product Synthesis: The Epothilone Story
59 (R ¼ H) was reacted with homochiral (S)-60. The reaction generated only diastereomer 64 which supported the concept of matching and mismatching issues at the kinetic level [38]. 7.5
Summary and Conclusion
This short chapter gave some insight in the troublesome and quite complicated aldol reaction in the context of epothilone chemistry. All the examples presented were related to the major stereochemical issue around this fascinating class of natural products that is the absolute control of the stereochemical triad C6aC7aC8. Many groups have contributed to that particular stereochemical problem because of the importance of this class of natural products an and optimal solution to this problem obviously is highly desirable. In the meantime, many analogues of the natural epothilones have been synthesized by academic groups and pharmaceutical companies – some of these are even more potent in biological systems than the natural compounds. This could lead to important developments for new anti-cancer drugs in the near future. To our knowledge, the simple acetonide-protected ethyl ketone is the backbone of many industry-based analog programs to achieve the central aldol coupling. This ketone is known as a simple and robust coupling partner yielding exclusively the desired stereochemical outcome with a large number of chiral aldehydes – even on multi kilogram scale. Typical procedure [17]: Synthesis of (4R,5S,6S,4OS)-2-(2,2-dimethyl-1,3-dioxan-4-yl)-5-hydroxy-2,4,6-trimethyl-10-undecen-3-one 16: A solution of ethyl ketone 15 (1.17 g, 5.45 mmol) in THF (1.0 mL) was added to a freshly prepared solution of LDA [nBuLi (3.34 mL, 1.6 m solution in hexanes, 5.35 mmol, 0.98 equiv) was added to a solution of diisopropylamine (749 mL, 5.35 mmol) in THF (4.0 mL) at 0 C] dropwise at 78 C. The solution was stirred for 1 h at 78 C. Aldehyde 7 (688 mg, 5.45 mmol, 1.0 equiv) was added dropwise and stirring was continued for 45 min at 78 C. The reaction mixture was quenched by dropwise addition of saturated aqueous NH4 Cl solution at 78 C. The organic layer was separated and the aqueous layer was extracted with Et2 O. The combined extracts were dried over MgSO4 and concentrated in vacuo. Flash chromatography (pentane/Et2 O ¼ 10:1) of the residue afforded antiCram aldol product 16 (1.36 g, 73%) and Cram aldol product (57 mg, 3%) as colorless oils. References ¨ fle, N. Bedorf, H. Reichenbach, (GBF), DE-4138042, 1 G. Ho 1993 [Chem. Abstr. 1993, 120, 52841].
References ¨ fle, H. Irschik, H. 2 K. Gerth, N. Bedorf, G. Ho Reichenbach, J. Antibiot. 1996, 49, 560–563. ¨ fle, in: Biotechnical Advances, 1993, 3 H. Reichenbach, G. Ho 11, 219–277. ¨ fle, N. Bedorf, H. Steinmetz, D. Schomburg, K. 4 G. Ho
5
6 7 8
9
10
11
12
13 14
15
16 17 18 19 20
21
Gerth, H. Reichenbach, Angew. Chem. 1996, 108, 1671– 1673; Angew. Chem. Int. Ed. Engl. 1996, 35, 1567–1569. a) D. M. Bollag, P. A. McQueney, J. Zhu, O. Jensens, L. Koupal, J. Liesch, M. E. Goetz, C. Lazarides, M. Woods, Cancer Res. 1995, 55, 2325–2333; b) R. J. Kowalski, P. Giannakakou, E. Hamel, J. Biol. Chem. 1997, 272, 2534– 2541. Moos, P. J.; Fitzpatrick, F. A. Proc. Natl. Acad. Sci. USA 1998, 95, 3896–3901. Pratt, W. B.; Buddon, R. W.; Ensminger, W. D.; Maybaum, J. The Anticancer Drugs, Oxford University Press, Oxford, 1994. D. Schinzer, Eur. Chem. Chron. 1996, 1, 7–10; b) M. Kalesse, Eur. Chem. Chron. 1997, 2, 7–11; c) L. Wessjohann, Angew. Chem. 1997, 109, 739–742; Angew. Chem. Int. Ed. Engl. 1997, 36, 739–742; d) K. C. Nicolaou, F. Roschangar, D. Vourloumis, Angew. Chem. 1998, 110, 2120–2153; Angew. Chem. Int. Ed. Engl. 1998, 37, 2014–2045. Wartmann, M.; Altmann, K.-H. Curr. Med. Chem. 2002, 2, 123; b) Harris, C. R.; Kuduk, S. D.; Danishefsky, S. J. Chemistry for the 21st Century 2001, 8. A. Balog, D. Meng, T. Kamenecka, P. Bertinato, D.-S. Su, E. J. Sorensen, S. J. Danishefsky, Angew. Chem. 1996, 108, 2976–2978; Angew. Chem. Int. Ed. Engl. 1996, 35, 2801–2803. Z. Yang, Y. He, D. Vourloumis, H. Vallberg, K. C. Nicolaou, Angew. Chem. 1997, 109, 170–172; Angew. Chem. Int. Ed. Engl. 1997, 36, 166–168. D. Schinzer, A. Limberg, A. Bauer, O. M. Bo¨hm, M. Cordes, Angew. Chem. 1997, 109, 543–544; Angew. Chem. Int. Ed. Engl. 1997, 36, 523–524. N. Miyaura, A. Suzuki, Chem. Rev. 1995, 95, 2457. K. C. Nicolaou, Y. He, D. Vourloumis, H. Vallberg, Z. Yang, Angew. Chem. 1996, 108, 2554–2556; Angew. Chem. Int. Ed. Engl. 1996, 35, 2399–2401. K. C. Nicolaou, Y. He, D. Vourloumis, H. Vallberg, F. Roschangar, F. Sarabia, S. Ninkovic, Z. Zang, J. I. Trujillo, J. Am. Chem. Soc. 1997, 119, 7960–7973. D. Schinzer, A. Limberg, O. M. Bo¨hm, Chem. Eur. J. 1996, 2, 1477–1482. D. Schinzer, A. Limberg, A. Bauer, O. M. Bo¨hm, Chem. Eur. J. 1999, 5, 2483–2491. F. Stuhlmann, unpublished results, University of Magdeburg. A. Limberg, PhD thesis, Technical University of Braunschweig, 1998. a) D. Schinzer, A. Bauer, J. Schieber, Chem. Eur. J. 1999, 9, 2492–2500; b) D. Schinzer, A. Bauer, J. Schieber, Synlett. 1998, 861–864. a) R. E. Taylor, Y. Chen, Org. Lett. 2001, 3, 2221–2224; b) R. E. Taylor, G. M. Galvin, K. A. Hilfiker, Y. Chen, J. Org.
327
328
7 The Aldol Reaction in Natural Product Synthesis: The Epothilone Story
22
23
24
25 26 27
28 29 30 31 32 33
34 35 36 37
38
Chem. 1998, 63, 9580–9583; c) R. E. Taylor, J. D. Haley, Tetrahedron Lett. 1997, 38, 2061–2064; d) N. Yoshikawa, Y. M. A. Yamada, J. Das, H. Sasai, M. Shibasaki, J. Am. Chem. Soc. 1999, 121, 4168–4178; e) D. Sawada, M. Shibasaki, Angew. Chem. 2000, 112, 215–219; Angew. Chem. Int. Ed. Engl. 2000, 39, 209–213; f ) D. Sawada, M. Kanai, M. Shibasaki, J. Am. Chem. Soc. 2000, 122, 10521–10532. a) K.-H. Altmann, Mini-Reviews in Medicinal Chemistry 2003, 3, 149; b) U. Klar, W. Skuballa, B. Buchmann, W. Schwede, T. Bunte, J. Hoffmann, R. B. Lichtner, ACS Symposium Series 2001, 796, 131. a) C. H. Heathcock, Science, 1981, 214, 395; b) C. H. Heathcock, C. T. White, J. Am. Chem. Soc. 1979, 101, 7076– 7077; c) C. H. Heathcock, M. C. Pirrung, C. T. Buse, J. P. Hagen, D. S. Young, J. E. Sohn, J. Am. Chem. Soc. 1979, 101, 7077–7079; d) C. H. Heathcock, C. T. Buse, W. A. Kleschick, M. C. Pirrung, J. E. Sohn, J. Lampe, J. Org. Chem. 1980, 45, 1066–1081. a) D. J. Cram, F. A. Abd Elhafez, J. Am. Chem. Soc. 1952, 74, 5828–5835; b) D. J. Cram, K. R. Kopecky, J. Am. Chem. Soc. 1959, 81, 2748–2755. a) M. Cherest, H. Felkin, N. Prudent, Tetrahedron Lett. 1968, 2199; b) N. T. Anh, O. Eisenstein, Nouv. J. Chem. 1977, 1, 61. Muharram, planned PhD thesis, University of Magdeburg, 2004. a) S. Masamune, W. Choy, F. A. J. Kerdesky, B. Imperiali, J. Am. Chem. Soc. 1981, 103, 1566–1568; b) C. H. Heathcock, C. T. White, J. Am. Chem. Soc. 1979, 101, 7076–7077; c) S. Masamune, W. Choy, J. S. Petersen, R. L. Sita, Angew. Chem. 1985, 97, 1–31. C. H. Heathcock in Asymmetric Synthesis, Vol 3 (Ed. J. D. Morrison), Academic Press, New York, 1984, 111. O. M. Bo¨hm, University of Magdeburg, unpublished results. H. E. Zimmerman, M. D. Traxler, J. Am. Chem. Soc. 1957, 79, 1920–1923. E. Claus, A. Pahl, P. G. Jones, H. M. Meyer, M. Kalesse, Tetrahedron Lett. 1997, 38, 1359–1362. K. Gerlach, M. Quitschalle, M. Kalesse, Tetrahedron Lett. 1999, 40, 3553. K. C. Nicolaou, S. Nincovic, F. Sarabia, D. Vourloumis, Y. He, H. Vallberg, M. R. V. Finlay, Z. Yang, J. Am. Chem. Soc. 1997, 119, 7974–7991. ¨ hler, Tetrahedron Lett. 1998, J. Mulzer, A. Mantoulidis, E. O 39, 8633–8636. J. Mulzer, G. Karig, P. Pojarliev, Tetrahedron Lett. 2000, 41, 7635–7638. H. J. Martin, M. Drescher, J. Mulzer, Angew. Chem. 2000, 112, 591–593; Angew. Chem. Int. Ed. Engl. 2000, 39, 581–583. A. Balog, C. Harris, K. Savin, X.-G. Zhang, T.-C. Chou, S. J. Danishefsky, Angew. Chem. 1998, 110, 2821–2824; Angew. Chem. Int. Ed. Engl. 1998, 37, 2675–2678. C. B. Lee, Z. Wu, F. Zhang, M. D. Chappel, S. J. Stachel, T.-C. Chou, Y. Guan, S. J. Danishefsky, J. Am. Chem. Soc. 2001, 123, 5249–5259
1
1
Silver, Gold, and Palladium Lewis Acids Akira Yanagisawa 1.1
Introduction
Silver(I), gold(I), and palladium(II) salts have moderate Lewis acidity and have been exploited as catalysts in organic reactions in recent years. Among these salts, Pd(II) compounds are the most well-known reagents for catalyzing a variety of carbon–carbon bond-forming reactions such as allylic alkylations [1]. Ag(I) salts are also popular reagents for promoting transformations, including glycosylation, cycloadditions, and rearrangements, which make use of their halophilicity or thiophilicity [2]. There are, however, few examples of organic reactions employing Au(I) or Au(III) compounds as Lewis acid catalysts. This chapter focuses on aldol reactions catalyzed by silver(I), gold(I), or palladium(II) Lewis acids. The Mukaiyama aldol reaction of silyl enol ethers or ketene silyl acetals and related reactions using silver(I) and palladium(II) compounds are reviewed in Section 1.2. The next section covers the diastereo- and enantioselective aldol-type reactions of activated isocyanides with aldehydes.
1.2
Mukaiyama Aldol Reaction and Related Reactions
Silver(I) compounds are known to promote the aldol condensation between silyl enol ethers or ketene silyl acetals and aldehydes (the Mukaiyama aldol reaction). For example, the adduct 3 is obtained in 72% yield when ketene silyl acetal 1 is treated with a,b-unsaturated aldehyde 2 in the presence of a catalytic amount of Ag(fod) (Scheme 1.1). Eu(fod)3 or Yb(fod)3 catalyzes a hetero-Diels–Alder reaction of 1 and 2 [3]. A [2þ2] cycloaddition followed by a ring opening of the resulting oxetane is an alternative possible route to the adduct 3. A BINAP-silver(I) complex is a superior asymmetric catalyst for allylation of aldehydes with allylic stannanes [4]. The chiral phosphine-silver(I) Modern Aldol Reactions. Vol. 2: Metal Catalysis. Edited by Rainer Mahrwald Copyright 8 2004 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim ISBN: 3-527-30714-1
2
1 Silver, Gold, and Palladium Lewis Acids
OSiMe3
O +
MeO
OSiMe3
Ag(fod) (5 mol%)
OHC
Ph 2
OMe
Ph
MeO
CH2Cl2, r.t.
OMe 3 (dr 60:40)
72% yield
1 Scheme 1.1
Ag(fod)-catalyzed Mukaiyama aldol reaction of ketene silyl acetal.
catalyst is prepared simply by stirring a 1:1 mixture of BINAP and silver(I) compound in THF at room temperature. The BINAP-silver(I) complex can be also used as a chiral catalyst of asymmetric aldol reaction. Although a variety of beneficial methods have been developed for catalytic asymmetric aldol reaction, most of these are chiral Lewis acid-catalyzed Mukaiyama aldol reactions using ketene silyl acetals or silyl enol ethers [5] and there has been no example on enol stannanes. Yanagisawa, Yamamoto, and their colleagues first reported the enantioselective aldol addition of tributyltin enolates 4 to aldehydes catalyzed by a BINAP-silver(I) complex (Scheme 1.2) [6]. OSnBu3 2
R + R4CHO
R1 R
(R)-BINAP·AgOTf (10 mol%) THF, -20 °C, 8 h
3
4
O
OH
R1
R4 R2
R
3
5
Scheme 1.2
Enantioselective aldol reaction of tributyltin enolates catalyzed by BINAPsilver(I) complex.
The tributyltin enolates 4 are easily generated from the corresponding enol acetates and tributyltin methoxide without any solvent [7]. The tin compounds thus prepared exist in the O-Sn form and/or the C-Sn form. Although the tin reagents themselves have sufficient reactivity toward aldehydes [7c], under the influence of the BINAP-silver(I) catalyst the reaction advances faster even at 20 C. The results employing optimum conditions in the catalytic enantioselective aldol reaction of a variety of tributyltin enolates or a-tributylstannylketones with aromatic, a,b-unsaturated, and aliphatic aldehydes are summarized in Table 1.1. The characteristic features are: (i) all reactions occur to provide the corresponding aldol adducts 5 in moderate to high yield in the presence of 10 mol% (R)-BINAP-AgOTf complex at 20 C, and no dehydrated aldol adduct is formed; (ii) with an a,bunsaturated aldehyde, the 1,2-addition reaction is predominant (entry 3); (iii) use of a sterically hindered tin enolate results in an increase in the
1.2 Mukaiyama Aldol Reaction and Related Reactions
3
Tab. 1.1
Diastereo- and enantioselective aldol addition of tin compounds to aldehydes in the presence of 10 mol% of (R)-BINAPAgOTf complex in THF at 20 C. Entry Tin Compound
Aldehyde
O
O
1d
SnBu3
Ph
5a O
O t-Bu
OH
PhCHO
6
2d
Yield (%)a anti:syn b ee (%)c
Product
SnBu3
PhCHO
t-Bu
7
Ph
* Ph
5b
Ph
t-Bu
t-Bu
69
86
75
94
OH
t-Bu
4a
Ph
81
<1:99
95
77
<1:99
95
94
92:8
93i
95
93:7
94i
5e O
6e
Ph
5d O
PhCHO
95
OH
CHO
OSnBu3
5e
Ph
*
5c O
4d
78
OH
CHO
t-Bu
77
OH
O
3d
73
Ph
OH
CHO t-Bu
Ph 5f
OSnBu3
7f
O PhCHO
O Ph +
5g-anti
4b
8f,h
OH
PhCHO
OH Ph 5g-syn
a Isolated
yield. by 1 H NMR analysis. c The value corresponds to the major diastereomer. Determined by HPLC analysis with chiral columns. d OaSn:CaSn < 1:99. e OaSn:CaSn > 99:1. The E:Z ratio for the OaSn isomer was < 1:99. f OaSn:CaSn > 99:1. g The syn isomer: 25% ee. h 1 mol% catalyst was used. i The syn isomer: 33% ee. b Determined
enantioselectivity of the aldol reaction. For example, ee higher than 90% are observed when pinacolone and tert-butyl ethyl ketone-derived tin compounds 7 and 4a are treated with aldehydes (entries 2 and 4–6); (iv) addition of the enol tributylstannane 4b derived from cyclohexanone ((E)-enolate) to
4
1 Silver, Gold, and Palladium Lewis Acids
P
H R R2
O
E
R
Ag+
O
R3
P SnBu3
P
H
*
1
H
*
1
Ag+
O
R3
O
Z
P SnBu3
R2
H A
anti
B
syn
Fig. 1.1
Probable structures of cyclic transition states.
benzaldehyde in the presence of 10 mol% (R)-BINAP-AgOTf in THF at 20 C yields the non-racemic anti aldol adduct 5g selectively with an anti:syn ratio of 92:8, in contrast with the syn selectivity afforded by representative chiral Lewis acid catalysts [5]. The anti isomer indicates 93% ee (entry 7). The amount of catalyst can be reduced to 1 mol% without losing the isolated yield or diastereo- and enantioselectivity (entry 8). In contrast, the (Z) enolate generated from tert-butyl ethyl ketone 4a produces the synaldol adducts 5e and 5f almost exclusively with 95% ee in the reaction with benzaldehyde and hydrocinnamaldehyde (entries 5 and 6). These results reveal unambiguously that the diastereoselectivity relies on the geometry of tin enolate, and that cyclic transition-state structures (A and B, Figure 1.1) are plausible models. Accordingly, from the (E) enolate, the anti-aldol product forms via a model A, and another model B for the (Z) enolate leads to the syn product. Analogous six-membered cyclic models including a BINAP-coordinated silver atom in place of a tributylstannyl group are also probable substitutes when the transmetalation to silver enolate is sufficiently rapid. Although the above-mentioned reaction is a superior asymmetric aldol process with regard to enantioselectivity and diastereoselectivity, it has a disadvantage of requiring the stoichiometric use of toxic trialkyltin compounds. The same group has shown that the amount of trialkyltin compounds can be reduced to a catalytic amount when an enol trichloroacetate is employed as a substrate for the reaction [8]. For example, treatment of benzaldehyde with the enol trichloroacetate of cyclohexanone 8 under the influence of (R)BINAP-AgOTf complex (5 mol%), tributyltin methoxide (5 mol%), and MeOH (200 mol%) in dry THF at 20 C to room temperature for 20 h provides a 92:8 mixture of non-racemic anti and syn aldol adduct, 5g-anti and 5g-syn respectively, in 82% yield (Scheme 1.3). The anti isomer 5g-anti affords 95% ee, a grade of enantiomeric excess similar to that obtained from a BINAP-silver(I)-catalyzed aldol reaction with enol tributylstannanes [6]. A suggested catalytic cycle of this asymmetric aldol reaction is shown in Figure 1.2. To start with, Bu3 SnOMe reacts with enol trichloroacetate 9 to yield trialkyltin enolate 4 and methyl trichloroacetate. The tin enolate 4 then adds enantioselectively to an aldehyde under the influence of BINAP-AgOTf
1.2 Mukaiyama Aldol Reaction and Related Reactions
(R)-BINAP·AgOTf (5 mol%) Bu3SnOMe (5 mol%) MeOH (200 mol%)
OCOCCl3 +
PhCHO
O
5
OH
O Ph +
Ph
THF, -20 °C (8 h) ~ r.t. (12 h) 82% yield
8
5g-anti (2S,1'R)
5g-syn (2R,1'R)
anti:syn = 92 (95% ee):8 Scheme 1.3
Enantioselective aldol reaction catalyzed by tin methoxide and BINAPsilver(I) complex.
as an asymmetric catalyst to furnish the tin alkoxide of non-racemic aldol adduct 10. Last, protonolysis of 10 by MeOH produces the optically active aldol product 5 and regenerates the tin methoxide. The rate of methanolysis is considered to be the key to success in the catalytic cycle. The BINAP-Ag(I)-catalyzed asymmetric Mukaiyama aldol reaction using trimethylsilyl enol ethers was first developed by Yamagishi and co-workers, who found that the reaction was accelerated by BINAP-AgPF6 in DMF containing a small amount of water, to give the aldol product with high enantioselectivity [9] (Scheme 1.4). In the reaction with BINAP-AgOAc, much higher catalytic activity and opposite absolute configuration of the aldol adduct were observed and ee was low [9]. Yanagisawa, Yamamoto, and their colleagues independently examined different combinations of BINAP-Ag(I) catalysts and silyl enol ethers and found that high enantioselectivity and chemical yields were obtained in the p-Tol-BINAP-AgF-catalyzed aldol reaction of trimethoxysilyl enol ethers in
O
(R)-BINAP·AgOTf R
OSnBu3
1
R4 R2 R 3 10
R4CHO
R1
OH
MeOH
OSnBu3 R2
O
3 4 R
Bu3SnOMe
MeOCOCCl3 R1
OCOCCl3 R2 9 R3
Fig. 1.2
A proposed catalytic mechanism for the asymmetric aldol reaction catalyzed by (R)-BINAPAgOTf and tin methoxide.
OH
R1
R4 R2 R 3 5
1 Silver, Gold, and Palladium Lewis Acids
6
OSiMe3
O
(S)-BINAP·AgPF6 (2 mol%)
+ Ph
Ph
H
O
HCl
DMF + 2% H2O, 25 °C, 2 h
THF
OH
Ph
11
Ph
12, 69% ee (S)
100% yield Scheme 1.4
BINAPsilver(I)-catalyzed asymmetric Mukaiyama aldol reaction.
methanol [10]. In addition, remarkable syn selectivity was observed for the reaction irrespective of the E:Z stereochemistry of the silyl enol ethers. For example, when the (Z)-trimethoxysilyl enol ether of t-butyl ethyl ketone 13 was treated with benzaldehyde the reaction proceeded smoothly at 78 to 20 C and syn-aldol adduct 5e was obtained almost exclusively with 97% ee (Scheme 1.5). In contrast, cyclohexanone-derived (E)-silyl enol ether gave the aldol adduct with an anti:syn ratio of 84:16 [10]. Use of a 1:1 mixture of MeOH and acetone as a solvent in the reaction of the trimethoxysilyl enol ethers resulted in higher enantioselectivity [10b]. O
OSi(OMe)3 +
OH
(R)-p-Tol-BINAP·AgF (10 mol%) PhCHO
t-Bu
MeOH, -78 ~ -20 °C, 6 h
13
84% yield
t-Bu
Ph
5e, syn:anti > 99 (97% ee):1
Scheme 1.5
Enantioselective aldol reaction of trimethoxysilyl enol ether catalyzed by p-Tol-BINAPAgF complex.
The BINAP-silver(I) complex was further applied to asymmetric Mannich-type reactions by Lectka and coworkers [11]. Treatment of silyl enol ether 11 with a solution of a-imino ester 14 in the presence of 10 mol% (R)-BINAP-AgSbF6 at 80 C leads the corresponding a-amino acid derivative 15 in 95% yield with 90% ee (Scheme 1.6). They showed that (R)BINAP-Pd(ClO4 )2 was also an effective chiral Lewis acid for the reaction though it gave lower ee (80%). Asymmetric Mukaiyama aldol reactions can also be catalyzed by cationic BINAP-Pd(II) complexes. In 1995 Sodeoka, Shibasaki et al. first reported Ts
OSiMe3
N
+ H
Ph 11
O
(R)-BINAP·AgSbF6 (10 mol%) CO2Et 14
THF, -80 °C, 24 h 95% yield
Ph
N
Ts
CO2Et 15, 90% ee
Scheme 1.6
Enantioselective Mannich-type reaction catalyzed by BINAPsilver(I) complex.
1.2 Mukaiyama Aldol Reaction and Related Reactions
(R)-BINAP·PdCl2 (5 mol%) AgOTf (5 mol%)
OSiMe3 + OHC
Ph
Ph 16
11
O
H+
7
OH
Ph
MS 4A, DMF-H2O, 23 °C
Ph 17, 73% ee (S)
86% yield Ar P
Ar
OH2 Pd2+ 2BF4– OH2 P Ar Ar 22, Ar = Ph 23, Ar = p-Tol
Ar P
H Ar
O
Ar
Ar P
Pd+ Pd+ O P P Ar Ar H Ar Ar 24, Ar = Ph 25, Ar = p-Tol
Scheme 1.7
Asymmetric Mukaiyama aldol reaction catalyzed by cationic BINAPPd(II) complexes.
that (R)-BINAP-PdClþ , prepared from a 1:1 mixture of (R)-BINAP-PdCl2 and AgOTf in wet DMF is an effective chiral catalyst for asymmetric aldol condensation of silyl enol ethers and aldehydes [12]. For instance, when hydrocinnamaldehyde (16) is treated with trimethylsilyl enol ether of acetophenone 11 under the influence of 5 mol% of this catalyst followed by desilylation the desired aldol adduct 17 is obtained in 86% yield with 73% ee as shown in Scheme 1.7. Some examples of the aldol reaction are summarized in Table 1.2. The same group subsequently succeeded in generating chiral palladium diaquo complexes 22 and 23 from (R)-BINAP-PdCl2 and (R)- pTol-BINAP-PdCl2 , respectively, by treatment with 2 equiv. AgBF4 in wet acetone [13]. These complexes are inert toward air and moisture, and have similar reactivity and enantioselectivity in the aldol reaction of 11 with the aliphatic aldehyde 16. Sodeoka et al. have further developed catalytic asymmetric Mannich-type reactions of silyl enol ethers with imines employing binuclear m-hydroxo palladium(II) catalysts 24 and 25 generated from the diaquo complexes 22 and 23, respectively [14]. In the reaction, a chiral palladium(II) enolate is assumed to be formed from the corresponding silyl enol ether. They later developed palladium complexes with polymer-supported BINAP ligands and showed that these reusable complexes are good catalysts for the asymmetric aldol reactions and Mannich-type reactions mentioned above [15]. Doucet and coworkers have shown that the complex dppe-Pd(OAc)2 is an efficient catalyst for Mukaiyama aldol addition of ketene silyl acetals to aldehydes and ketones under neutral conditions [16]. The reaction proceeds smoothly, even in the presence of 0.1 mol% of the catalyst. [Bis(diphenylphosphino)alkane]bis(propenyl)ruthenium complexes also catalyze the aldol addition, furnishing a variety of 3-hydroxymethyl esters in good yields, as do other late transition metal complexes; platinum(II) cationic complexes are known to act as Lewis acids. Fujimura reported the first
2BF4–
8
1 Silver, Gold, and Palladium Lewis Acids Tab. 1.2
Catalytic asymmetric aldol reaction of silyl enol ethers with benzaldehyde in the presence of 5 mol% (R)-BINAPPdCl2 aAgOTf in wet DMF. Entry
Silyl Enol Ether
Product
OSiMe3
1c
O
Ph
ee (%)b
87d
71
80
73
58e
72f
OSiMe3
Ph 11
Yield (%)a
Ph 18
OSiMe3
O
OH Ph
2 20
19 OSiMe3
O
OH
3
Ph 21
5g
a Isolated
yield. by HPLC analysis with chiral columns. c Desilylation with acid was not done. d Desilylated product was formed in 9% yield with 73% ee. e The syn:anti ratio was 74:26. f The value corresponds to the major diastereomer. b Determined
example of platinum-catalyzed enantioselective aldol reaction of ketene silyl acetals with aldehydes [17]. The chiral catalysts are prepared by treatment of chiral bisphosphine-Pt acyl complexes with triflic acid. In the aldol reaction, a C-bound platinum enolate is assumed to be an intermediate, on the basis of on 31 P NMR and IR studies.
1.3
Asymmetric Aldol Reactions of a-Isocyanocarboxylates
In 1986, Ito, Sawamura, and Hayashi showed that chiral ferrocenylphosphine 26-gold(I) complexes catalyzed the aldol-type reaction of isocyanoacetate with aldehydes to provide optically active 5-alkyl-2-oxazoline-4carboxylate (Scheme 1.8) [18]. Since then, they have extensively studied the chiral gold(I)-catalyzed reaction [19] as have Pastor and Togni [20]. The gold complexes can be generated in situ by mixing bis(cyclohexyl isocyanide)gold(I) tetrafluoroborate and (R)-N-methyl-N-[2-(dialkylamino)ethyl]-1-[(S)-1 0 ,2-bis(diphenylphosphino)ferrocenyl]ethylamine (26). Examples of the reaction of methyl isocyanoacetate (27) and different aldehydes in the presence of 1 mol% of 26c-Au(I) complex are summarized in
1.3 Asymmetric Aldol Reactions of a-Isocyanocarboxylates
Me
H N
Fe
NR'2 + [Au(c-HexNC)2]BF4
PPh2
Me PPh2 26
26·Au(I) complex
CH2Cl2
26a: NR'2 = NMe2 26b: NR'2 = N 26c: NR'2 = N
CO2Me + RCHO
O
26·Au(I) complex (1 mol%)
R
CH2Cl2, 25 °C
O
NC
CO2Me R
CO 2Me
+
27
N
O
trans-28
N
cis-28
H3O+ NH2 R
CO2H OH syn-29
NH2
NH2 OH
n-C13H27 OH D-syn-sphingosine
OH
n-C13H27 OH
(30)
D-anti-sphingosine
(31)
NHMe CO2H OH MeBmt [(4R)-4-((E)-But-2-enyl)-4,N-dimethyl-L-threonine, 32] Scheme 1.8
Asymmetric aldol reaction of methyl isocyanoacetate with aldehydes catalyzed by chiral ferrocenylphosphine 26–gold(I) complexes.
Table 1.3. Benzaldehyde and substituted aromatic aldehydes, except 4nitrobenzaldehyde, are transformed into the corresponding trans-oxazolines 28 with high enantio- and diastereoselectivity (entries 1–6). Secondary and tertiary alkyl aldehydes give trans-28 nearly exclusively with high ee (entries 9 and 10). The trans-oxazolines 28 can be readily hydrolyzed to threo-b-
9
1 Silver, Gold, and Palladium Lewis Acids
10 Tab. 1.3
Diastereo- and enantioselective aldol reaction of methyl isocyanoacetate (27) with aldehydes catalyzed by chiral ferrocenylphosphine 26cgold(I) complex. Entry Aldehyde
Yield, %a trans:cis b % ee c
Product Ph
1
CO2Me
Ph
PhCHO
O
N
O
trans-28a
N
CO2Me 2-MeC6H4
O Me
O
N
trans-28b 2-MeOC6H4
CHO
trans-28c CO2Me
O
4-ClC6H4
N
CO2Me 4-O2NC6H4
O
O
N
N
CO2Me
O CHO
O
+
N
O
83:17
86
86
95:5
96
85
87:13
92
99
89:11
89
99
96:4
87
N
CO2Me +
CHO
Me
O
N
CO2Me
N
cis-28g Me
CO2Me
+ O
N
O
trans-28h i-Bu i-BuCHO
80
cis-28f
trans-28g
9
94
n-Pr
O
MeCHO
94:6
CO2Me
O
CO2Me
8d
97
O
n-Pr n-Pr
92
cis-28e
trans-28f
7
92:8
CO2Me
+ O
O O
98
cis-28d
trans-28e
6
95
CO2Me
O
N
4-O2NC6H4 CHO
96:4
cis-28c
trans-28d
O 2N
N
+
CHO
98
CO2Me
O
N
4-ClC6H4 Cl
95
cis-28b
CO2Me 2-MeOC6H4
O OMe
5
N
+
3
95:5
CO2Me
+
2
93
cis-28a
2-MeC6H4
CHO
4
CO2Me
+
N cis-28h
CO2Me
i-Bu
CO 2Me
+ O
N
trans-28i
O
N cis-28i
1.3 Asymmetric Aldol Reactions of a-Isocyanocarboxylates
11
Tab. 1.3
(continued) Entry Aldehyde
CO2Me
t-Bu
10
Yield, %a trans:cis b % ee c
Product CO2Me
t-Bu +
t-BuCHO
O
N
O
trans-28j
N
94
cis-28j
a Isolated
yield. by 1 H NMR analysis. c Determined by 1 H NMR analysis with chiral shift reagent Eu(dcm) . 3 d 0.2 mol% of the catalyst was used. b Determined
hydroxy a-amino acids 29. The gold-catalyzed aldol reaction has been applied to the asymmetric synthesis of the biologically important compounds d-threo-sphingosine (30) [21], d-erythro-sphingosine (31) [21], and MeBmt (32) [22]. The enantioselective synthesis of ()-a-kainic acid has also been achieved using this aldol reaction [23]. A proposed transition-state model for the reaction is shown in Figure 1.3. The presence of the 2-(dialkylamino)ethylamino group in 26 is necessary to obtain high selectivity [24]. The terminal amino group abstracts one of the a-protons of isocyanoacetate coordinated with gold, and the resulting ion pair causes advantageous arrangement of the enolate and aldehyde around the gold. In contrast, Togni and Pastor proposed an alternative acyclic transition-state model [20d]. The chiral ferrocenylphosphine-gold(I)-catalyzed aldol reaction of a-alkyl a-isocyanocarboxylates 33 with paraformaldehyde gives optically active 4alkyl-2-oxazoline-4-carboxylates 34 with moderate to good enantioselectivity [25]. The absolute configuration (S) of the product indicates that the reaction proceeds selectively at the si face of the enolate, as illustrated in Figure 1.3. These oxazolines 34 can be converted into a-alkylserine derivatives 35 (Scheme 1.9).
H
Ph Ph P
+ Au
Fe P
Ph
Me Me
Ph
O C
R N
O– OMe
+ NHR'2 H
N
Fig. 1.3
Transition-state assembly in the gold-catalyzed asymmetric aldol reaction.
>99:1
97
12
1 Silver, Gold, and Palladium Lewis Acids
CO2Me + (CH2O)n
R
L*·[Au(c-HexNC)2]BF4 (1 mol%) CH2Cl2, 25 °C
NC
MeO2C R O
33 R = Me, Et, i-Pr, Ph L* = 26a or 26b
N
(S)-34 63~81% ee H 3O + MeO2C R NH2 HO (S)-35
Scheme 1.9
Catalytic asymmetric synthesis of a-alkylserines.
This enantioselective aldol reaction using isocyanoacetate 27 is quite effective for aromatic aldehydes or tertiary alkyl aldehydes, but not for sterically less hindered aliphatic aldehydes, as described above. Ito and coworkers found that very high enantioselectivity is obtained even for acetaldehyde (R ¼ Me) in the aldol reaction with N,N-dimethyl-a-isocyanoacetamide (36) (Scheme 1.10) [26]. Use of a-keto esters in place of aldehydes also results in moderate to high enantioselectivity of up to 90% ee [27]. The same group also developed an asymmetric aldol reaction of Nmethoxy-N-methyl-a-isocyanoacetamide (a-isocyano Weinreb amide) with aldehydes (Scheme 1.10). For instance, reaction of the Weinreb amide 37 with acetaldehyde in the presence of 26c-Au(I) catalyst gives the optically active trans-oxazoline 39 (E ¼ CON(Me)OMe; R ¼ Me) with high diastereoand enantioselectivity similar to those of 36 [28]. The oxazoline can be transformed into N,O-protected b-hydroxy-a-amino aldehydes or ketones. (Isocyanomethyl)phosphonate 38 is also a beneficial pronucleophile that leads to optically active (1-aminoalkyl)phosphonic acids, which are
E +
RCHO
NC 36~38
L*·[Au(c-HexNC)2]BF4 (1 mol%)
R O
N
O
trans-39 E
R
L*
CONMe2 (36) CON(Me)OMe (37) PO(OPh)2 (38)
Me Me Ph
26b 26c 26b
Gold(I)-catalyzed asymmetric aldol reaction of isocyanoacetamides and (isocyanomethyl)phosphonate.
E
+
CH2Cl2, 25 °C
Scheme 1.10
R
E
N
cis-39
trans (% ee) : cis 91 (99) : 9 95 (97) : 5 >98 (96) : 2
1.3 Asymmetric Aldol Reactions of a-Isocyanocarboxylates
E +
R
E
O
N
26b·Ag(I) (1~2 mol%)
E
+
RCHO solvent, 25~30 °C
NC 27 or 40
R O
trans-39
E
R
Ag(I)
Solvent
CO2Me (27)a CO2Me (27)a SO2(p-Tol) (40) SO2(p-Tol) (40)
Ph i-Pr Ph i-Pr
AgOTf AgClO4 AgOTf AgOTf
ClCH2CH2Cl ClCH2CH2Cl CH2Cl2 CH2Cl2
N
cis-39
trans (% ee) : cis 96 (80) : 4 99 (90) : 1 >99 (77) : 1 >99 (86) : 1
a) slow addition of 27 over 1 h. Scheme 1.11
Asymmetric aldol reaction of methyl isocyanoacetate and tosylmethylisocyanide catalyzed by chiral ferrocenylphosphinesilver(I) complex.
phosphonic acid analogs of a-amino acids, via trans-5-alkyl-2-oxazoline-4phosphonates 39 (E ¼ PO(OPh)2 , Scheme 1.10) [29]. Ito and coworkers found that chiral ferrocenylphosphine-silver(I) complexes also catalyze the asymmetric aldol reaction of isocyanoacetate with aldehydes (Scheme 1.11) [30]. It is essential to keep isocyanoacetate at a low concentration to obtain a product with high optical purity. They performed IR studies on the structures of gold(I) and silver(I) complexes with chiral ferrocenylphosphine 26a in the presence of methyl isocyanoacetate (27) and found a significant difference between the coordination numbers of the isocyanoacetate to the metal in these metal complexes (Scheme 1.12). The P 26a Au+ CNCH2CO2Me P
41 RCHO high ee
low ee
RCHO
RCHO P
P 26a Ag
+
+27 CNCH2CO2Me
P
42
-27
Scheme 1.12
A difference in the coordination number of methyl isocyanoacetate to metal between gold(I) and silver(I) complexes.
26a Ag+ P
CNCH2CO2Me CNCH2CO2Me 43
13
14
1 Silver, Gold, and Palladium Lewis Acids
gold(I) complex has a tricoordinated structure 41, which results in high ee, whereas the silver(I) complex is in equilibrium between tricoordinated structure 42 and tetracoordinated structure 43, which results in low enantioselectivity. Slow addition of isocyanoacetate 27 to a solution of the silver(I) catalyst and aldehyde effectively reduces the undesirable tetracoordinated species and results in high enantioselectivity. The asymmetric aldol-type addition of tosylmethyl isocyanide (40) to aldehydes can also be catalyzed by the chiral silver(I) complex giving, almost exclusively, trans-5-alkyl-4-tosyl-2-oxazolines 39 [E ¼ SO2 ( p-Tol)] with up to 86% ee, as shown in Scheme 1.11 [31]. The slow addition method described above is not necessary for this reaction system. Soloshonok and Hayashi used chiral ferrocenylphosphine-gold(I) complexes in asymmetric aldol-type reactions of fluorinated benzaldehydes with methyl isocyanoacetate (27) and N,N-dimethyl-a-isocyanoacetamide (36). Interestingly, successive substitution of hydrogen atoms by fluorine in the phenyl ring of benzaldehyde causes a gradual increase in both the cis selectivity and the ee of cis oxazolines [32]. Cationic chiral palladium complexes are known to catalyze the aldol reaction of methyl isocyanoacetate (27) and aldehydes. For example, Richards et al. prepared cationic 2,6-bis(2-oxazolinyl)phenylpalladium(II) complex 44 from the corresponding bromopalladium(II) complex and AgSbF6 in wet CH2 Cl2 and showed that an increase in rate was observed for the aldol reaction of 27 with benzaldehyde in the presence of 1 mol% 44 and 10 mol% Hu¨nigs base [33]. Zhang and coworkers developed a palladium(II) complex of PCP-type chiral ligand 46 (PCP is the monoanionic ‘‘pincer’’ ligand [C6 H3 (CHMePPh2 )2 -2,6] ). Removal of the chloride with AgOTf produces an active cationic chiral Pd(II) catalyst for the asymmetric aldol reaction of aldehydes (Scheme 1.13) [34]. Several examples of the reaction under the influence of 1 mol% of catalyst 46 are summarized in Table 1.4. When the effects of solvent on enantioselectivity were examined in the reaction with benzaldehyde, THF was found to be solvent of choice (trans-47a: 24% ee, cis47a: 67% ee, entry 1). The trans isomers were usually obtained as major products though with lower ee. In the reaction with aromatic aldehydes the enantioselectivity is almost constant (entries 1–5) and the trisubstituted aromatic aldehyde gives the highest ee (entry 5). It is noteworthy that higher enantioselectivity is observed with aliphatic aldehydes than with aromatic aldehydes with regard to their cis product (entries 6 and 7). l-Valine-derived NCN-type Pd(II) complex 48 (NCN is the monoanionic, para-functionalized ‘‘pincer’’ ligand [C6 H2 (CH2 NMe 2 )2 -2,6] ) synthesized by van Koten and coworkers is also an active catalyst for the aldol reaction after conversion into the corresponding cationic complex by treatment with AgBF4 in wet acetone [35]. Motoyama and Nishiyama have shown that excellent trans diastereoselectivity (> 99% trans) and moderate enantioselectivity (57% ee) was obtained in the asymmetric aldol-type condensation of tosylmethyl isocyanide with benzaldehyde employing cationic Pd(II) aqua complex 45 [36].
1.4 Summary and Conclusions
+ X– O
O N i-Pr
Pd
Ph2P
N
H H2O i-Pr 44 (X = SbF6) 45 (X = BF4)
CO2Me + RCHO
PPh2
46
46/AgOTf (1 mol%) (i-Pr)2NEt (10 mol%)
R
THF, 23 °C
O
NC
Pd Cl
H
27
CO2Me R
CO2Me
+ N
trans-47
O
N
cis-47
NMe2 Pd Br NH NMe2
HO2C 48 Scheme 1.13
Asymmetric aldol reaction of methyl isocyanoacetate with aldehydes catalyzed by cationic chiral palladium(II) complexes.
Other notable examples of the aldol-type reaction using a variety of palladium complexes have also appeared [37–41].
1.4
Summary and Conclusions
Described herein are examples of aldol reactions using silver(I), gold(I), or palladium(II) Lewis acids. The BINAP-silver(I) catalyst has made possible the aldol reaction of silyl enol ethers or trialkyltin enolates with high enantio- and diastereoselectivity. This silver catalyst is also effective in Mannich-type reactions of silyl enol ethers with a-imino esters. The remarkable affinity of the silver ion for halides is useful for accelerating chiral palladium-catalyzed asymmetric Mukaiyama aldol reactions. Isolated chiral palladium diaquo complexes and binuclear m-hydroxo palladium(II) complexes can catalyze asymmetric Mannich-type reactions and the aldol reaction. The chiral ferrocenylphosphine gold(I)-catalyzed asymmetric aldol reaction results in high stereoselectivity, although the substrates are restricted to a-isocyanocarboxylates and their derivatives, and has proven to be an excellent method for synthesizing optically active a-amino acid derivatives and
15
PhCHO
1
CH3
O 2N
3
4
2
Aldehyde
Entry
CHO
CHO
CHO
N
N
+
N
+
N
N
CO2Me
cis-47d
O
N
CO2Me
cis-47b
O
CO2Me
cis-47c
O
CO2Me 4-O2NC6H4
trans-47d
O
4-O2NC6H4
+
CO2Me 4-MeC6H4
trans-47c
O
4-MeC6H4
N
CO2Me
cis-47a
O
Ph
CO2Me N
+
trans-47b
O
CO2Me
trans-47a
O
Ph
Product
60
80
81
85
Yield, %a
74:26
82:18
81:19
78:22
trans:cis b
21
11
23
24
trans
% ee c
Asymmetric aldol reaction of methyl isocyanoacetate (27) with aldehydes catalyzed by a cationic Pd(II) complex generated from 46 and AgOTf.
Tab. 1.4
57
61
66
67
cis
16
1 Silver, Gold, and Palladium Lewis Acids
EtCHO
CHO
CHO
b Determined
yield. by 1 H NMR analysis. c Determined by GC analysis.
a Isolated
7
6
5
N
CO2Me
trans-47g
O
Et
N
+
CO2Me
trans-47f
O
c-C6H11
N
+
N
CO2Me
cis-47g
O
Et
N
N
CO2Me
cis-47e
O
CO2Me
cis-47f
O
c-C6H11
+
CO2Me 2,4,6-Me3C6H2
trans-47e
O
2,4,6-Me3C6H2
91
97
84
91:9
72:28
86:14
30
11
26
70
74
71
1.4 Summary and Conclusions 17
18
1 Silver, Gold, and Palladium Lewis Acids
amino alcohols. The examples given here unambiguously indicate that silver(I), gold(I), and palladium(II) compounds in combination with chiral ligands are chiral Lewis acid catalysts of great promise for asymmetric synthesis.
1.5
Experimental Procedures Typical Procedure for Asymmetric Aldol Reaction of Benzaldehyde with 3,3Dimethyl-1-tributylstannyl-2-butanone (7) Catalyzed by BINAP-AgOTf Complex. Synthesis of (R)-4,4-Dimethyl-1-hydroxy-1-phenyl-3-pentanone (5b, entry 2 in Table 1.1) [6]. A mixture of AgOTf (26.7 mg, 0.104 mmol) and (R)BINAP (64.0 mg, 0.103 mmol) was dissolved in dry THF (3 mL) under argon atmosphere and with direct light excluded and stirred at 20 C for 10 min. To the resulting solution was added dropwise a THF solution (3 mL) of benzaldehyde (100 mL, 0.98 mmol), and then 3,3-dimethyl-1tributylstannyl-2-butanone (7, 428.1 mg, 1.10 mmol) was added over a period of 4 h with a syringe pump at 20 C. The mixture was stirred for 4 h at this temperature and treated with MeOH (2 mL). After warming to room temperature, the mixture was treated with brine (2 mL) and solid KF (ca. 1 g). The resulting precipitate was removed by filtration and the filtrate was dried over Na2 SO4 and concentrated in vacuo. The crude product was purified by column chromatography on silica gel to afford the aldol adduct 5b (161.7 mg, 78% yield as a colorless oil). TLC RF 0.22 (1:5 ethyl acetate–hexane); IR (neat) 3625–3130, 3063, 3033, 2971, 2907, 2872, 1701, 1605, 1495, 1478, 1455, 1395, 1368, 1073, 1057, 1011, 984, 914, 878, 760, 747, 700 cm1 ; 1 H NMR (CDCl3 ) d (ppm) 1.14 (s, 9 H, 3 CH3 ), 2.89 (d, 2 H, J ¼ 5.7 Hz, CH2 ), 3.59 (d, 1 H, J ¼ 3.0 Hz, OH), 5.13 (m, 1 H, CH), 7.29–7.39 (m, 5 H, aromatic); [a] 30 D þ61.5 (c 1.3, CHCl3 ). The enantioselectivity was determined to be 95% ee by HPLC analysis using a chiral column (Chiralcel OD-H, Daicel Chemical Industries, hexane–i-PrOH, 20:1, flow rate 0.5 mL min1 ); t minor ¼ 17.7 min, t major ¼ 20.2 min. Typical Procedure for Silver(I)-catalyzed Asymmetric Mukaiyama Aldol Reaction of Benzaldehyde with Acetophenone Silyl Enol Ether 11. Synthesis of (S)-1Hydroxy-1,3-diphenyl-3-propanone (12, Scheme 1.4) [9]. Wet DMF containing 2% H2 O (206 mL) was added under nitrogen atmosphere to a mixture of AgPF6 (4.0 mg, 0.013 mmol) and (S)-BINAP (8.4 mg, 0.013 mmol) and the solution was stirred at room temperature for 10 min. Benzaldehyde (69 mL, 0.67 mmol) was added and stirring was continued for 10 min. Acetophenone silyl enol ether 11 (276 mL, 1.35 mmol) was added and the mixture was stirred for 2 h at 25 C. It was filtered through a short silica gel column, concentrated in vacuo, and clear oil was obtained. The oil was hydrolyzed
1.5 Experimental Procedures
with 1 m HCl THF/H2 O (1:1) solution, extracted with ether, dried over anhydrous sodium sulfate, concentrated in vacuo to afford a pale clear oil. This oil was purified by column chromatography on silica gel (1:1 ethyl acetate– hexane) to give the (S)-enriched aldol adduct 12 (100% yield, 69% ee). 1 H NMR (CDCl3 ) d (ppm) 3.38 (d, 2 H, J ¼ 5.9 Hz, CH2 ), 3.56 (d, 1 H, J ¼ 3.0 Hz, OH), 5.35 (dt, 1 H, J ¼ 3.0, 5.9 Hz, CH), 7.26–7.62 (m, 8 H, aromatic), 7.95 (d, 2 H, J ¼ 7.3 Hz, aromatic); FAB-MS calcd. for C15 H14 O2 , 226 (Mþ ); found 227 ((M þ 1)þ ), 209 ((M-OH)þ ); HPLC analysis using a chiral column (Chiralcel OB-H, Daicel Chemical Industries, hexane–i-PrOH, 9:1, flow rate 0.9 mL min1 ); t minor ¼ 22.5 min (R), t major ¼ 33.5 min (S). Typical Procedure for Asymmetric Aldol Reaction of Trimethoxysilyl Enol Ether 13 with Benzaldehyde Catalyzed by (R)- p-Tol-BINAP-AgF Complex. Synthesis of 1-Hydroxy-2,4,4-trimethyl-1-phenyl-3-pentanone (5e, Scheme 1.5) [10]. A mixture of AgF (13.0 mg, 0.102 mmol) and (R)- p-Tol-BINAP (67.9 mg, 0.100 mmol) was dissolved in dry MeOH (6 mL) under an argon atmosphere and with direct light excluded, and stirred at 20 C for 10 min. Benzaldehyde (100 mL, 0.98 mmol) and t-butyl ethyl ketone-derived trimethoxysilyl enol ether 13 (236.9 mg, 1.01 mmol) were successively added dropwise, at 78 C, to the resulting solution. The mixture was stirred at this temperature for 2 h, then at 40 C for 2 h, and finally at 20 C for 2 h. It was then treated with brine (2 mL) and solid KF (ca. 1 g) at ambient temperature for 30 min. The resulting precipitate was removed by filtration through a glass filter funnel filled with Celite and silica gel. The filtrate was dried over Na2 SO4 and concentrated in vacuo after filtration. The crude product was purified by column chromatography on silica gel (1:5 ethyl acetate–hexane as eluent) to afford a mixture of the aldol adduct 5e (181.2 mg, 84% yield). The syn/anti ratio was determined to be >99/1 by 1 H NMR analysis. The enantioselectivity of the syn isomer was determined to be 97% ee by HPLC analysis using a chiral column (Chiralcel OD-H, Daicel Chemical Industries, hexane–i-PrOH, 40:1, flow rate 0.5 mL min1 ); tsyn-minor ¼ 17.1 min, tsyn-major ¼ 18.0 min. Specific rotation of the syn isomer (95% ee) [a] 30 D 67.1 (c 1.3, CHCl3 ). Other spectral data (IR and 1 H NMR) of the syn isomer were in good agreement with reported data [6]. Typical Procedure for Asymmetric Mukaiyama Aldol Reaction of Silyl Enol Ethers with Aldehydes Catalyzed by Cationic BINAP-Pd(II) Complexes. Synthesis of (R)-1,3-Diphenyl-1-trimethylsiloxy-3-propanone (18, Scheme 1.7, and entry 1 in Table 1.2) [12, 13]. Wet DMF (8 mL dry DMF with 144 mL H2 O) was added to a mixture of (R)-BINAP-PdCl2 (160 mg, 0.20 mmol), AgOTf (51 mg, 0.20 mmol), and MS 4 A˚ (powder, 1.2 g) and the suspension was stirred at 23 C for 20 min. After cannula filtration, benzaldehyde (410 mL, 4.0 mmol) and acetophenone silyl enol ether 11 (1.23 mL, 6.0 mmol) were added to the resulting orange solution and the mixture was stirred for 13 h at 23 C. Dilution of the reaction mixture with diethyl ether, filtration
19
20
1 Silver, Gold, and Palladium Lewis Acids
through a short silica gel column, and concentration afforded pale yellow oil. This crude product was purified by column chromatography on silica gel to give the (R)-enriched silylated aldol adduct 18 (1.04 g, 87% yield, 71% ee) and its desilylated product (82 mg, 9% yield, 73% ee). The enantioselectivity of the silylated product 18 was determined by HPLC analysis using Chiralcel OJ (hexane–i-PrOH, 9:1) after conversion to the corresponding desilylated product (1 m HClaTHF, 1:2). Specific rotation of the desilylated aldol adduct (70% ee) [a]D þ32.4 (c 0.74, MeOH). General Procedure for Asymmetric Aldol Reaction of Methyl Isocyanoacetate (27) with Aldehydes Catalyzed by Chiral Ferrocenylbisphosphine-Gold(I) Complexes (Scheme 1.8 and Table 1.3) [18]. Methyl isocyanoacetate (27, 5.0 mmol) was added to a solution of bis(cyclohexyl isocyanide)gold(I) tetrafluoroborate (0.050 mmol), chiral ferrocenylbisphosphine 26 (0.050–0.055 mmol), and aldehyde (5.0–5.5 mmol) in CH2 Cl2 (5 mL) and the mixture was stirred under nitrogen at 25 C until 27 was not detected by silica gel TLC (hexane–ethyl acetate, 2:1) or IR. Evaporation of the solvent followed by bulb-to-bulb distillation gave oxazoline 28. The trans/cis ratio was determined by 1 H NMR spectroscopy and the enantiomeric purity of trans-28 and cis-28, readily separated by MPLC (hexane–ethyl acetate), were determined by 1 H NMR studies using Eu(dcm)3 . The OCH3 singlet of the major enantiomer of trans-28 always appeared at a higher field than that of the minor enantiomer. General Procedure for Asymmetric Aldol Reaction of Tosylmethyl Isocyanide (40) with Aldehydes Catalyzed by Chiral Ferrocenylbisphosphine-Silver(I) Complexes (Scheme 1.11) [31]. Aldehyde (1.5 mmol) was added to a solution of silver(I) triflate (0.011 mmol), chiral ferrocenylbisphosphine 26 (0.010 mmol), and tosylmethyl isocyanide (40, 1.0 mmol) in dry CH2 Cl2 (5 mL). The mixture was stirred under nitrogen at 25 C for 2 h. The catalyst was removed by passing the mixture through a bed of Florisil (17 mm 30 mm, EtOAc), and MPLC purification (silica gel, CH2 Cl2 aEtOAc, 15:1) gave oxazoline 39. The trans/cis ratio was determined by 1 H NMR spectroscopy and the enantiomeric excess of trans-39 was determined by HPLC analysis with a chiral stationary phase after conversion to the corresponding anaphthylurea derivative of amino alcohol (1. LiAlH4 , 2. a-naphthyl isocyanate). Experimental Procedure for Pd(II)-Catalyzed Asymmetric Aldol Reaction of Methyl Isocyanoacetate (27) with Aldehydes (Scheme 1.13 and Table 1.4) [34]. Preparation of [(1R,1OR)-2,6-bis[1-(diphenylphosphino)ethyl]phenyl]chloropalladium(II) (46). PdCl2 (PhCN)2 (383 mg, 1.0 mmol) was added to a solution of (1R,1 0 R)-1,3-bis[1-(diphenylphosphino)ethyl]benzene (502 mg, 1.0 mmol) in CH2 Cl2 (15 mL). The resulting orange solution was stirred at room tem-
References
perature for 24 h. The reaction mixture was then reduced to one-third of its volume and absolute ethanol was added to precipitate the product. Filtration gave the desired product 46 as a yellow powder (418 mg, 85%), mp 249–252 C; [a]D 323.6 (c 1.0, CHCl3 ). 1 H NMR (360 MHz, CDCl3 ) d (ppm) 1.19 (m, 6H, CH3 ), 4.04 (m, 2H, CH), 7.10 (m, 3H), 7.34–7.45 (m, 12H), 7.70– 7.74 (m, 4H), 7.95–7.97 (m, 4H); 13 C NMR (90 MHz, CDCl3 ) d (ppm) 22.1 (s, 2C, CH3 ), 46.7 (m, 2C, CH), 122.5–156.8 (twelve different aromatic carbon atoms); 31 P NMR (145 MHz, CDCl3 ) d (ppm) 46.5. HRMS calculated for C34 H31 P2 PdCl (Mþ ) 642.0624; found 642.0634. General Procedure for the Aldol Reaction. A solution of Pd complex 46 (7 mg, 0.011 mmol, 1.0 mol%) and AgOTf (3 mg, 0.011 mmol) in CH2 Cl2 (2 mL) was stirred for ca. 30 min at room temperature. The resulting cloudy solution was filtered through Celite and the solvent was removed under reduced pressure to give the active catalyst. The catalyst was then dissolved in EtOAc and passed through a plug of silica gel to remove excess AgOTf. After removal of EtOAc the catalyst was dissolved in THF (6 mL), and methyl isocyanoacetate (27, 110 mL, 1.1 mmol) was added followed by introduction of diisopropylethylamine (19 mL, 0.11 mmol) and aldehyde (1.1 mmol). The reaction was monitored by TLC (EtOAc–hexane, 1:1, visualized with KMnO4 ). After removal of solvent, the pure product 47 was obtained by bulb-to-bulb distillation under reduced pressure (0.1 mmHg). The trans/cis ratio was determined by 1 H NMR spectroscopy by integration of the methyl ester protons and the enantiomeric excess for trans-47 and cis-47 were determined by GC analysis. References 1 (a) B. M. Trost, in Comprehensive Organometallic Chemistry,
Vol. 8, (ed.: G. Wilkinson), Pergamon Press, Oxford, 1982, Chapter 57. (b) S. A. Godleski, in Comprehensive Organic Synthesis, Vol. 4, (eds.: B. M. Trost, I. Fleming), Pergamon Press, New York, 1991, p. 585. (c) A. Pfaltz, M. Lautens, in Comprehensive Asymmetric Catalysis, Vol. 2, (eds.: E. N. Jacobsen, A. Pfaltz, H. Yamamoto), Springer, Heidelberg, 1999, Chapter 24, p. 833. (d) B. M. Trost, C. B. Lee, in Catalytic Asymmetric Synthesis, 2nd ed., (ed.: I. Ojima), Wiley– VCH, New York, 2000, Chapter 8E, p. 593. 2 (a) D. R. Rae, in Encyclopedia of Reagents for Organic Synthesis, Vol. 6, (ed.: L. A. Paquette), John Wiley & Sons, Chichester, 1995, p. 4461. (b) J. C. Lanter, in Encyclopedia of Reagents for Organic Synthesis, Vol. 6, (ed.: L. A. Paquette), John Wiley & Sons, Chichester, 1995, p. 4469. (c) L.-G. Wistrand, in Encyclopedia of Reagents for Organic Synthesis, Vol. 6, (ed.: L. A. Paquette), John Wiley & Sons, Chichester, 1995, p. 4472. (d) T. H. Black, in Encyclopedia of Reagents for Organic Synthesis, Vol. 6, (ed.: L. A. Paquette), John Wiley & Sons, Chichester, 1995, p. 4476.
21
22
1 Silver, Gold, and Palladium Lewis Acids 3 S. Castellino, J. J. Sims, Tetrahedron Lett. 1984, 25, 4059. 4 (a) A. Yanagisawa, H. Nakashima, A. Ishiba, H. Yamamoto,
5
6 7
8
9
10
11 12
13 14
15 16 17 18
19
J. Am. Chem. Soc. 1996, 118, 4723. See also: (b) C. Bianchini, L. Glendenning, Chemtracts–Inorg. Chem. 1997, 10, 339; (c) P. G. Cozzi, E. Tagliavini, A. Umani-Ronchi, Gazz. Chim. Ital. 1997, 127, 247. Reviews: (a) T. Bach, Angew. Chem. Int. Ed. Engl. 1994, 33, 417; (b) T. K. Hollis, B. Bosnich, J. Am. Chem. Soc. 1995, 117, 4570; (c) M. Braun, in Houben–Weyl: Methods of Organic Chemistry, Vol. E 21, (eds.: G. Helmchen, R. W. Hoffmann, J. Mulzer, E. Schaumann), Georg Thieme Verlag, Stuttgart, 1995, p. 1730; (d) S. G. Nelson, Tetrahedron: Asymmetry 1998, 9, 357; (e) H. Gro¨ger, E. M. Vogl, M. Shibasaki, Chem. Eur. J. 1998, 4, 1137. A. Yanagisawa, Y. Matsumoto, H. Nakashima, K. Asakawa, H. Yamamoto, J. Am. Chem. Soc. 1997, 119, 9319. (a) M. Pereyre, B. Bellegarde, J. Mendelsohn, J. Valade, J. Organomet. Chem. 1968, 11, 97; (b) I. F. Lutsenko, Y. I. Baukov, I. Y. Belavin, J. Organomet. Chem. 1970, 24, 359; (c) S. S. Labadie, J. K. Stille, Tetrahedron 1984, 40, 2329; (d) K. Kobayashi, M. Kawanisi, T. Hitomi, S. Kozima, Chem. Lett. 1984, 497. (a) A. Yanagisawa, Y. Matsumoto, K. Asakawa, H. Yamamoto, J. Am. Chem. Soc. 1999, 121, 892. (b) A. Yanagisawa, Y. Matsumoto, K. Asakawa, H. Yamamoto, Tetrahedron 2002, 58, 8331. (a) M. Ohkouchi, M. Yamaguchi, T. Yamagishi, Enantiomer 2000, 5, 71. (b) M. Ohkouchi, D. Masui, M. Yamaguchi, T. Yamagishi, J. Mol. Catal. A: Chem. 2001, 170, 1. (a) A. Yanagisawa, Y. Nakatsuka, K. Asakawa, H. Kageyama, H. Yamamoto, Synlett 2001, 69. (b) A. Yanagisawa, Y. Nakatsuka, K. Asakawa, M. Wadamoto, H. Kageyama, H. Yamamoto, Bull. Chem. Soc. Jpn. 2001, 74, 1477. D. Ferraris, B. Young, T. Dudding, T. Lectka, J. Am. Chem. Soc. 1998, 120, 4548. (a) M. Sodeoka, K. Ohrai, M. Shibasaki, J. Org. Chem. 1995, 60, 2648. Review: (b) M. Sodeoka, M. Shibasaki, Pure Appl. Chem. 1998, 70, 411. M. Sodeoka, R. Tokunoh, F. Miyazaki, E. Hagiwara, M. Shibasaki, Synlett 1997, 463. (a) E. Hagiwara, A. Fujii, M. Sodeoka, J. Am. Chem. Soc. 1998, 120, 2474. (b) A. Fujii, E. Hagiwara, M. Sodeoka, J. Am. Chem. Soc. 1999, 121, 5450. A. Fujii, M. Sodeoka, Tetrahedron Lett. 1999, 40, 8011. H. Doucet, J.-L. Parrain, M. Santelli, Synlett 2000, 871. O. Fujimura, J. Am. Chem. Soc. 1998, 120, 10032. (a) Y. Ito, M. Sawamura, T. Hayashi, J. Am. Chem. Soc. 1986, 108, 6405; (b) Y. Ito, M. Sawamura, T. Hayashi, Tetrahedron Lett. 1987, 28, 6215; (c) T. Hayashi, M. Sawamura, Y. Ito, Tetrahedron 1992, 48, 1999. Reviews: (a) M. Sawamura, Y. Ito, Chem. Rev. 1992, 92, 857; (b) M. Sawamura, Y. Ito, in Catalytic Asymmetric Synthesis, (ed.: I. Ojima), VCH, New York, 1993, p. 367.
References 20 (a) S. D. Pastor, Tetrahedron 1988, 44, 2883; (b) S. D. Pastor,
21 22 23 24 25
26 27 28 29
30 31 32
33 34 35 36 37 38 39
40 41
A. Togni, J. Am. Chem. Soc. 1989, 111, 2333; (c) A. Togni, S. D. Pastor, Helv. Chim. Acta 1989, 72, 1038; (d) A. Togni, S. D. Pastor, J. Org. Chem. 1990, 55, 1649; (e) A. Togni, R. Ha¨usel, Synlett 1990, 633; (f ) S. D. Pastor, A. Togni, Tetrahedron Lett. 1990, 31, 839; (g) A. Togni, S. D. Pastor, G. Rihs, J. Organomet. Chem. 1990, 381, C21; (h) S. D. Pastor, A. Togni, Helv. Chim. Acta 1991, 74, 905. Y. Ito, M. Sawamura, T. Hayashi, Tetrahedron Lett. 1988, 29, 239. A. Togni, S. D. Pastor, G. Rihs, Helv. Chim. Acta 1989, 72, 1471. M. D. Bachi, A. Melman, J. Org. Chem. 1997, 62, 1896. M. Sawamura, Y. Ito, T. Hayashi, Tetrahedron Lett. 1990, 31, 2723. (a) Y. Ito, M. Sawamura, E. Shirakawa, K. Hayashizaki, T. Hayashi, Tetrahedron Lett. 1988, 29, 235. See also: (b) Y. Ito, M. Sawamura, E. Shirakawa, K. Hayashizaki, T. Hayashi, Tetrahedron 1988, 44, 5253. Y. Ito, M. Sawamura, M. Kobayashi, T. Hayashi, Tetrahedron Lett. 1988, 29, 6321. Y. Ito, M. Sawamura, H. Hamashima, T. Emura, T. Hayashi, Tetrahedron Lett. 1989, 30, 4681. M. Sawamura, Y. Nakayama, T. Kato, Y. Ito, J. Org. Chem. 1995, 60, 1727. (a) A. Togni, S. D. Pastor, Tetrahedron Lett. 1989, 30, 1071; (b) M. Sawamura, Y. Ito, T. Hayashi, Tetrahedron Lett. 1989, 30, 2247. T. Hayashi, Y. Uozumi, A. Yamazaki, M. Sawamura, H. Hamashima, Y. Ito, Tetrahedron Lett. 1991, 32, 2799. M. Sawamura, H. Hamashima, Y. Ito, J. Org. Chem. 1990, 55, 5935. (a) V. A. Soloshonok, T. Hayashi, Tetrahedron Lett. 1994, 35, 2713; (b) V. A. Soloshonok, T. Hayashi, Tetrahedron: Asymmetry 1994, 5, 1091; (c) V. A. Soloshonok, A. D. Kacharov, T. Hayashi, Tetrahedron 1996, 52, 245. M. A. Stark, C. J. Richards, Tetrahedron Lett. 1997, 38, 5881. J. M. Longmire, X. Zhang, M. Shang, Organometallics 1998, 17, 4374. G. Guillena, G. Rodrı´guez, G. van Koten, Tetrahedron Lett. 2002, 43, 3895. Y. Motoyama, H. Kawakami, K. Shimozono, K. Aoki, H. Nishiyama, Organometallics 2002, 21, 3408. ¨ntener, M. Wo¨rle, Helv. R. Nesper, P. S. Pregosin, K. Pu Chim. Acta 1993, 76, 2239. C. Schlenk, A. W. Kleij, H. Frey, G. van Koten, Angew. Chem. Int. Ed. 2000, 39, 3445. A. W. Kleij, R. J. M. Klein Gebbink, P. A. J. van den Nieuwenhuijzen, H. Kooijman, M. Lutz, A. L. Spek, G. van Koten, Organometallics 2001, 20, 634. M. D. Meijer, N. Ronde, D. Vogt, G. P. M. van Klink, G. van Koten, Organometallics 2001, 20, 3993. G. Rodriguez, M. Lutz, A. L. Spek, G. van Koten, Chem. Eur. J. 2002, 8, 45.
23
25
2
Boron and Silicon Lewis Acids for Mukaiyama Aldol Reactions Kazuaki Ishihara and Hisashi Yamamoto 2.1
Achiral Boron Lewis Acids 2.1.1
Introduction
The classical boron Lewis acids, BX3 , RBX2 and R2 BX (X ¼ F, Cl, Br, I, OTf ) are now popular tools in organic synthesis. B(III) can act as a Lewis acid because there is an empty p-orbital on the boron. Enthalpy values indicate that when pyridine is the reference base, the Lewis acidities of Group IIIB halides increase in the order AlX3 > BX3 > GaX3 . The Lewis acidity of BX3 generally increases in the order fluoride < chloride < bromide < iodide, i.e. the exact reverse of the order expected on the basis of relative sdonor strengths of the halide anions. The main reason for this anomaly is that in these BX3 compounds the BaX bonds contain a p-component which is formed by overlap of a filled p-orbital on the halogen with the empty porbital on the boron. Because the latter orbital is used to form a s-bond when BX3 coordinates with a Lewis base, this p-component is completely destroyed by complex formation. The strength of the p-component now increases in the order iodide < bromide < chloride < fluoride, i.e. the amount of p-bond energy that is lost on complex formation increases as the atomic weight of the halogen decreases. Evidently, as far as the extent of complex formation is concerned, this is a more important factor than the corresponding decrease in the s-donor strength of the halogen. The BF3 and BCl3 complexes of diethyl ether are less stable than those of dimethyl ether, and the same order of stability is observed for complexes of diethyl and dimethyl sulfides. As expected, steric interaction decreases as the distance between the metal and ligand atom is increased. Thus, it decreases when the metal atom is changed from boron to aluminum, and when the ligand atom is changed from oxygen to sulfur. The classical boron Lewis acids are used stoichiometrically in Mukaiyama Modern Aldol Reactions. Vol. 2: Metal Catalysis. Edited by Rainer Mahrwald Copyright 8 2004 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim ISBN: 3-527-30714-1
26
2 Boron and Silicon Lewis Acids for Mukaiyama Aldol Reactions
aldol reactions under anhydrous conditions, because the presence of even a small amount of water causes rapid decomposition or deactivation of the promoters. To obviate some of these inherent problems, the potential of arylboron compounds, Arn B(OH)n3 (n ¼ 1–3), bearing electron-withdrawing aromatic groups as a new class of boron catalyst has recently been demonstrated. For example, tris(pentafluorophenyl)borane, B(C6 F5 )3 , is a convenient, commercially available Lewis acid of strength comparable with that of BF3 , but without the problems associated with reactive BaF bonds. Although its primary commercial application is as a co-catalyst in metallocenemediated olefin polymerization, its potential as a Lewis acid catalyst for Mukaiyama aldol reactions is now recognized as being much more extensive. Diarylborinic acids and arylboronic acids bearing electron-withdrawing aromatic groups are also highly effective Lewis acid catalysts [1]. 2.1.2
BF3 .Et2 O
Although TiCl 4 is a better Lewis acid at effecting aldol reactions of aldehydes, acetals, and silyl enol ethers, BF3 .Et2 O is more effective for aldol reactions with anions generated from transition metal carbenes and with tetrasubstituted enol ethers such as (Z)- and (E)-3-methyl-2-(trimethylsilyloxy)-2-pentane [2, 3]. One exception is the preparation of substituted cyclopentanediones from acetals by aldol condensation of protected fourmembered acyloin derivatives with BF3 .Et2 O rather than TiCl 4 (Eq. (1)) [2, 4]. Use of the latter catalyst results in some loss of the silyl protecting group. The pinacol rearrangement is driven by the release of ring strain in the four-membered ring and is controlled by an acyl group adjacent to the diol moiety.
O + R
R'
Me3SiO
OSiMe3
BF3•Et2O 89% yield
SiMe3 HO O O R R' O
(1)
R R' O
This reagent is the best promoter of the aldol reaction of 2-(trimethylsiloxy)acrylate esters, prepared by the silylation of pyruvate esters, to afford galkoxy-a-keto esters (Eq. (2)) [5] These esters occur in a variety of important natural products.
2.1 Achiral Boron Lewis Acids
OSiMe3 OEt
OMe + Ph
27
OMe
O
ð2Þ
OMe O
BF3•Et2O
OEt
Ph
CH2Cl2 –78 °C to 0 °C 86% yield
O
BF3 .Et2 O can improve or reverse aldehyde diastereofacial selectivity in the aldol reaction of silyl enol ethers with aldehydes, to give syn adducts. For example, Heathcock and Flippin have reported that the reaction of the silyl enol ether of pinacolone with 2-phenylpropanal using BF3 .Et2 O results in enhanced Felkin selectivity (up to 36:1) compared with addition of the corresponding lithium enolate [6, 7]. When the a-substituents are more subtly differentiated, however, it is still difficult to achieve acceptable levels of selectivity. Davis et al. have reported that use of triisopropylsilyl enol ether and i-Pr3 SiB(OTf )4 results in selectivity of ca. 100:1 with 2-phenylpropanal and a useful level of 7:1 with 2-benzylpropanal (Eq. (3)) [8]. Control experiments employing BF3 .Et2 O catalysis and 2-benzylpropanal as substrate results in lower selectivity (ca. 3:1) that does not depend substantially on the bulk of the silyl group in the enolate (Eq. (3)). In contrast, both levels of 1,2asymmetric induction in the i-Pr3 SiB(OTf )4 (5 mol%)- and the BF3 .Et2 O (1 equiv.)-promoted additions of silyl ketene thioacetals to a-asymmetric aldehydes are affected by the bulk of the silyl group (Eqs. (4) and (5)) [8].
OTIPS + Bn
CHO
X
X=Me, t-Bu, OMe, Ot-Bu
Lewis acid
X
Bn TIPSO
i-Pr3SiB(OTf)4 BF3•Et2O
+
O
Cram 7 3
X
Bn TIPSO
: :
O
anti-Cram 1 1
ð3Þ
OR + Bn
CHO
i-Pr3SiB(OTf)4
St-Bu (5 mol%)
St-Bu + Bn
Bn
R=TIPS R=TBDMS
RO
O
Cram 5.5 3.6
St -Bu RO
:
O
anti-Cram 1 1
ð4Þ
28
2 Boron and Silicon Lewis Acids for Mukaiyama Aldol Reactions
OR
BF3•Et2O
+ Bn
CHO
St-Bu
(1 equiv)
St-Bu + Bn
Bn HO
R=TIPS R=TBDMS
St-Bu
O
Cram 13 5.8
HO
O
anti-Cram 1 1
:
ð5Þ
Addition of the tetrasubstituted selenoketene silyl acetal to b-benzyloxy aldehyde in the presence of Et2 BOTf leads to good yields and high ratios of products with 3,4-anti relative stereochemistry (Cram chelate model) (Eq. (6)). In contrast, reversed diastereoselectivity and a synthetically interesting ratio of 1:11 in favor of the 3,4-syn products is obtained when the bulky bsilyloxy aldehyde is used in the presence of the monodentate Lewis acid BF3 .OEt2 (Felkin–Anh model) (Eq. (7)) [9].
BnO
OSiMe3
O +
H
OMe SePh
Et2BOTf (1.2 equiv) CH2Cl2, –78 °C
BnO
OH O
OMe SePh 86% yield, syn:anti=<1:20
ð6Þ
TBDPSO
OSiMe3
O H
BnO
+
OMe SePh
BF3•OEt2 (1.5 equiv) CH2Cl2, –78 °C
TBDPSO
OMe SePh 84% yield, 2,3-(syn:anti )=11:1
BEt2OTf Me O
O Me
H H
enol ether
Cram chelate
enol ether
OH O
BF3
HH Felkin-Anh
OTBDPS
ð7Þ
The subsequent free-radical-based hydrogen transfer reaction of the products obtained from the Mukaiyama reactions occurs under the control of the exocyclic effect. Excellent diastereoselectivity favoring the 2,3-anti relative stereochemistry is obtained from the reduction with Bu3 SnH in the presence of Et2 BOTf and N,N-diisopropylethylamine (Eq. (8)) [9]. The initial product of the aldol condensation is a b-hydroxy carbonyl compound, which is often transformed into the corresponding a,bunsaturated derivative. Interestingly, gaseous BF3 , which is a much stronger Lewis acid than BF3 .Et2 O promotes the fragmentation reaction from b-aryl-
2.1 Achiral Boron Lewis Acids
Et2BOTf (1.2~1.5 equiv) i-Pr2NEt (1.5 equiv) Et3B (0.2 equiv)
OR OH O
OR OH O
+ Bu3SnH OMe (2 equiv) CH2Cl2, –78 °C SePh
OMe 2,3-(syn:anti )=<1:20
RO TfOEt2B
Me
CO2Me
O
H
ð8Þ
HSnBu3 Exocyclic effect
b-hydroxyketones to (E)-arylalkenes and carboxylic acids in good yields (Eq. (9)) [10]. The combination of powerful Lewis acid and non-nucleophilic solvents, for example CCl 4 , are keys to this unexpected behavior. BCl3 and BBr3 are less effective in this reaction. OH O Ph
BF3 (excess) R'
O
R
Ph
+ HO
CCl4, reflux
R BF3
Ph
–BF3
H O+ OB–F3 R' R
+
R'
(9)
HO R' OB–F3
Ph R
2.1.3
B(C6 F5 )3
B(C6 F5 )3 is an air-stable, water-tolerant Lewis acid catalyst, which can be readily prepared as a white solid by reacting BCl3 with C6 F5 Li [11, 12]. This compound does not react with pure oxygen [12]. It is very thermally stable, even at 270 C, and is soluble in many organic solvents [12]. Although B(C6 F5 )3 catalyzes reactions most effectively under anhydrous conditions, B(C6 F5 )3 exposed to air is also available (not anhydrous grade). Mukaiyama aldol reactions of a variety of silyl enol ethers or ketene silyl acetals with aldehydes or other electrophiles proceed smoothly in the presence of 2 mol% B(C6 F5 )3 [13a,c]. The following characteristic features can be noted:
. the products can be isolated as b-trimethylsilyloxy ketones when crude adducts are worked-up without exposure to acid;
29
30
2 Boron and Silicon Lewis Acids for Mukaiyama Aldol Reactions
. the reaction can be conducted in aqueous media, so reaction of the silyl . .
enol ether derived from propiophenone with a commercial aqueous solution of formaldehyde does not present any problems; the rate of an aldol reaction is markedly increased by use of an anhydrous solution of B(C6 F5 )3 in toluene under an argon atmosphere; and silyl enol ethers can be reacted with chloromethyl methyl ether or trimethylorthoformate; hydroxymethyl, methoxymethyl, or dimethoxymethyl C1 groups can be introduced at the position a to the carbonyl group.
These aldol-type reactions do not proceed when triphenylborane is used (Eq. (10)).
R1CHO
OSiMe3 R
+
or other electrophiles
2
R4 R3
Examples (yield) OH O Ph
Et
1) B(C6F5)3 (2-10 mol%)
Ph
65%
Ph
O MeO
(10)
OMe O Ph
72%
OMe
96%
90%
Ph
R4 R2 R3
OH O Et
O HO
R1
2) HCl or TBAF
OH O
94%
OH O
MeO
Ph
65%
2.1.4
Ar2 BOH
Diarylborinic acids, Ar2 BOH, bearing electron-withdrawing aromatic groups are effective catalysts for Mukaiyama aldol condensation and subsequent selective dehydration of b-hydroxy carbonyl compounds [14]. The catalytic activity of diarylborinic acids (C6 F5 )2 BOH and [3,5-(CF3 )2 C6 H3 ]2 BOH in Mukaiyama aldol reactions is much higher than that of the corresponding arylboronic acids. It is worthy of note that small amounts of E-isomeric dehydrated product has been isolated in reactions catalyzed by diarylborinic acids (C6 F5 )2 BOH and [3,5-(CF3 )2 C6 H3 ]2 BOH. In contrast, no dehydrated products have been isolated in the presence of (C6 F5 )3 B, despite its extremely high catalytic activity (Eq. (11)). Significant features of these active borinic acid catalysts are that they are strong Lewis acids and have a hydroxy group on the boron atom. Dehydration is strongly favored in THF. The reaction usually proceeds smoothly, and a,b-enones are obtained in high yields as E isomers. In reactions of a-substituted b-hydroxy carbonyl compounds, a,b-enones are preferentially
2.1 Achiral Boron Lewis Acids
+
PhCHO
OSiMe3
ArnB(OH)3-n (2 mol%)
Ph
CH2Cl2, -78 °C
1) 1N NaOH 2) 1N HCl-THF
OH O Ph
O
+ Ph
Ph
Ph
C6F5B(OH)2
0%
(C6F5)2BOH
89%
7%
[3,5-(CF3)2C6H3]2BOH
89%
10%
B(C6F5)3
98%
0%
(11)
0%
obtained from anti aldols whereas most of the syn aldols are recovered. This dehydration is, therefore, a useful and convenient method for isolating pure syn aldols from syn/anti isomeric mixtures (Eq. (12)). Reaction of the bhydroxy function with the diarylborinic acid leads to a cyclic intermediate, which should be susceptible to dehydration. Subsequent transformation to a,b-enones occurs via an enolate intermediate resulting from selective abstraction of a pseudo-axial a-proton perpendicular to the carbonyl face. A cyclic intermediate formed from a syn aldol and a diarylborinic acid would be thermodynamically less stable than the cyclic intermediate. Thus, dehydration to (E)-a,b-enones occurs selectively for anti-aldols. (C6F5)2BOH (5-10 mol%)
OH O R1
R2 R3
O
THF, ambient temp.
R1
OH O
+ R1
R2 R3
R2 R3
Ar2BOH H 2 R
O Ar O B Ar
R3 R1
R1
O
R2 O B– Ar
R3 H
Ar
H
H+
(12)
Examples O Ph
O Ph
Ph
Ph
Ph
Bu
>99%
>99% OH O Ph
O
97% OH O
O Ph
syn:anti=71:29
Ph
Ph
35%
+
Ph
Ph
65% (>99% syn)
Diphenylborinic acid (10 mol%), which is stable in water, is an effective catalyst for the Mukaiyama aldol reaction in the presence of benzoic acid (1
31
32
2 Boron and Silicon Lewis Acids for Mukaiyama Aldol Reactions
mol%) as a co-catalyst and sodium dodecyl sulfate (10 mol%) as a surfactant (Eq. (13)) [15]. Use of water as solvent is essential in this reaction. The reaction proceeds sluggishly in organic solvents such as dichloromethane and diethyl ether. Much lower yield than in water is obtained under neat conditions. Not only aromatic aldehydes but also a,b-unsaturated and aliphatic aldehydes give high syn selectivity. Although lower diastereoselectivity is observed when E enolates are used, reverse diastereoselectivity is observed when both stereoisomers of the silyl enolate derived from tert-butyl thiopropionate are used. Ph2BOH (10 mol%) C12H25SO3Na (10 mol%) PhCO2H (1 mol%)
OSiMe3
PhCHO +
H2O, 30 °C <24 h 72 h
St-Bu 98% E 97% Z
OH O Ph
St-Bu
62% yield, 96% syn 84% yield, 61% anti
ð13Þ This reaction can be explained by a mechanism via the boron enolate as reaction intermediate generated by SiaB exchange (Figure 2.1). That the diastereoselectivity is reversed by using the stereoisomers of the silyl enolate supports the hypothesis because this type of reversal has also been observed in the traditional boron enolate mechanism which involves a chair-like sixmembered transition-state. Furthermore, the trend that anti selectivity is poorer than syn selectivity in the reactions is also found in the traditional boron enolate-mediated aldol reactions. The mechanism is based on the hypothesis that Ph2 BOH can react with a silyl enolate to form the corresponding boron enolate under these conditions. When a Z enolate is used, an aldehyde and the boron enolate react via a chair-like six-membered tranOH O Ph
OSiMe3 St-Bu
St-Bu Ph2BOH
H2O Ph2BO Ph
Me3SiOH O
OBPh2 St-Bu
St-Bu
PhCHO Fig. 2.1
Proposed boron enolate mechanism.
2.2 Chiral Boron Lewis Acids
sition state to give the syn aldol product. The BaO bond of the initial aldol product is presumed to be easily cleaved by hydrolysis, and Ph2 BOH can be regenerated. In this mechanism benzoic acid might accelerate the SiaB exchange step, which is thought to be rate-determining.
2.2
Chiral Boron Lewis Acids 2.2.1
Introduction
Asymmetric aldol synthesis has recently been the focus of intense interest. Especially worthy of note is the development of homogeneous catalytic enantioselective Mukaiyama aldol reactions in which a small amount of chiral ligand can induce asymmetry for a given reaction. The possible applications depend on the selectivity of the homogeneous catalysts, which are of great interest because they provide simple methods for synthesizing complex molecules for which enantiocontrol is needed. This section addresses chirally modified boron Lewis acid complexes, in which there has been increased interest because of their capacity to induce chirality. They have been successfully used for Mukaiyama aldol reactions. 2.2.2
Chiral Boron Lewis Acids as Stoichiometric Reagents
This reaction of silyl ketene acetals with aldehydes using 1 as a stoichiometric chiral reagent was originally reported by Reetz et al. (Eq. (14)) [16]. The aldol addition of 1-(trimethylsiloxy)-1-methoxy-2-methyl-1-propene and 3-methylbutanal provides the aldol in only 57% yield, but with 90% ee.
Ph
i-BuCHO +
OTMS OMe
Ph B Cl 1 (1 equiv)
CH2Cl2 -78 °C to rt
OH i-Bu
(14) CO2Me
57% yield, 90% ee
The use of chiral acyloxyborane (CAB) as a chiral reagent seems to be more effective for this reaction, which proceeds faster and with higher yields and enantiomeric excess. Kiyooka and his colleagues first described the use of a variety of chiral oxaborolidines, derived from sulfonamides of a-amino acids and borane, in the course of the selective aldol reaction between silyl ketene acetals and aldehydes (Eq. (15)) [17a]. This reaction gives b-hydroxy esters in high enantioselectivity and yields.
33
34
2 Boron and Silicon Lewis Acids for Mukaiyama Aldol Reactions
O
i-Pr TsN
OTMS
+
R1CHO
OEt
O B 2a H (1 equiv)
R1 *
CH2Cl2 -78 °C to rt
(15)
OH CO2Et
77-87% yield, 83-93% ee
The role played by the trialkylsilyl group is unclear. Changing the trimethylsilyl group increases not only the selectivity but also the product of the reaction – b-hydroxy acetals are now obtained instead of b-hydroxy esters. They investigated the course of the reaction of a variety of tert-butyldimethylsilyl ketene acetals and aldehydes with 2a (Eq. (16)). The acetal is probably formed by hydride transfer to an intermediate ester. The tert-butyl group apparently stabilizes the second intermediate and consequently changes the course of the reaction. It should be noted that the first cyclic intermediate is stabilized by coordination of the borane with the oxygen of the carbonyl. The results are outstanding when R2 ¼ Me (92–98%). Selectivity and yield decrease, however, when R2 ¼ H (45–62%) (Eq. (16)). R2 R1CHO +
OTBDMS
R2
OEt i-Pr TsN O Ph
B
2a (1 equiv) CH2Cl2, -78 °C
O
i-Pr
O TBDMS
TsN
H CO2Et
O
O
B
O OTBDMS
(16) OEt
Ph R2 R 2
R2 R 2 OH OTBDMS 1
OEt R * R2 R2 R2=H: 77-82% yield, 45-62% ee R2=Me: 79-85% yield, 92-98% ee
A stoichiometric amount of 2a catalyzed the asymmetric aldol reaction of aldehydes with enol silyl ethers and subsequent asymmetric reduction in one pot to afford syn 1,3-diols with high enantioselectivity (Eq. (17)) [17b]. With a variety of aldehydes, 1,3-diols were obtained in moderate yields (53– 70%) with high syn diastereoselectivity. The syn 1,3-diols prepared from aliphatic aldehydes in the reaction (EtCN) are almost enantiomerically pure
2.2 Chiral Boron Lewis Acids
(96–99% ee). Propionitrile was the best solvent for reaction selectivity. The TBDMS substituent of enol silyl ether reduced the syn selectivity. OTMS
2a (1 equiv)
OH OH
OH O +
i-PrCHO + Ph
EtCN –78 °C, 3 h
i-Pr
Ph
i-Pr
65% yield syn:anti=97:3 99% ee
Ph
17% yield 60% ee (S)
ð17Þ Thus, good to excellent diastereo- and enantioselectivity are achieved simultaneously with 1,3-diols whereas the enantioselectivity for b-hydroxy ketones is substantially lower. These observations on the selectivity of the products suggest that syn-selective reduction of the reaction intermediate occurs after enantioselective aldol addition. On the basis of Kiyooka’s working hypothesis for the aldol reaction mechanism, the reduction proceeds via intramolecular hydride transfer, which is accelerated by a matching mode between the promoter’s chirality and that of the newly formed aldol (Eq. (18)). An alternative mechanism without chelation is also possible; this involves hydride delivery to the preferred Osilyl oxocarbenium ion conformer (Eq. (19)). i-Pr
i-Pr
O
i-Pr
Ts N B O O H i-Pr
H
O
SiMe3
O N O B H OTMS O
O
Ts
i-Pr
(18)
O
i-Pr
Ts N B O O H
Ts N O B O H Ph i-Pr
i-Pr
i-Pr
H
O
SiMe3 Ph
Ph
i-Pr
Ph
Ph
Ts N B O O OTMS
i-Pr O
O+TMS
i-Pr Ts N O O B O H + O TMS i-Pr Ph
O
Ts N B O O OTMS i-Pr
Ph
(19)
35
36
2 Boron and Silicon Lewis Acids for Mukaiyama Aldol Reactions
A very short asymmetric synthesis of an insect attractant, (1S,3S,5R)1,3-dimethyl-2,9-dioxabicyclo[3.3.1]nonane, a host-specific substance for the ambrosia beetle that infests the bark of the Norway spruce, has been realized with a 2a-mediated aldol reaction strategy; enantio- and diastereoselectivity were high (Eq. (20)) [17c].
O
O
O
EtCN –78 °C, 3 h
OH OTMS
O
2a (1 equiv)
OTMS
+
CHO
+
36% yield, 94% ee
OH OH
O
O
+
21% yield, 72% ee
O
O
OH O
24% yield, 43% ee
1. TBAF, THF 2. TsOH, CH2Cl2
ð20Þ O
O 78% yield
The chiral borane 2a-mediated aldol reaction proceeds with a-chiral aldehydes in a reagent-controlled manner. Both enantiomers are obtained almost optically pure from one racemic aldehyde (Eqs. (21) and (22)) [17d].
(S)-2a (1 equiv) CH2Cl2, -78 °C, 3 h
Ph
CO2Et
+
Ph
OH
CO2Et
ð21Þ
OH
44% yield, >99% ee
20% yield, >99% ee
OTMS + Ph
CHO
OEt
(R)-2a (1 equiv) CH2Cl2, -78 °C, 3 h
Ph
CO2Et OH
18% yield, >99% ee
+
Ph
CO2Et OH
(22)
41% yield, >99% ee
The reaction of b-chiral aldehydes with ketene silyl acetals gives both syn and anti aldols in similar yields without any Cram selectivity (Eq. (23)) [17d].
2.2 Chiral Boron Lewis Acids
OTMS CHO +
OEt
OBn
ð23Þ
(S)-2a (1 equiv) CH2Cl2, -78 °C, 3 h
CO2Et
+
OBn OH 46% yield, 98% ee
CO2Et OBn OH 42% yield, 82% ee
In Kiyooka’s approach to acetate aldols using a stoichiometric amount of 2a, a serious reduction (ca. 10–20%) in enantiomeric excess was observed in the reaction with silyl ketene acetals derived from a-unsubstituted acetates, compared with the high level of enantioselectivity (> 98% ee) in the reaction with 1-ethoxy-2-methyl-1-(trimethylsiloxy)-1-propene. Introduction of an eliminable substituent, e.g. a methylthio or bromo substituent, after aldol reaction at the a-position of chiral esters resolves this problem [17e]. Asymmetric synthesis of dithiolane aldols has been achieved in good yields by using the silyl ketene acetal derived from 1,3-dithiolane-2-carboxylate in the 2a-promoted aldol reaction; desulfurization of the dithiolane aldols produces the acetate aldols in high enantiomeric purity (Eq. (24)).
PhCHO +
S
OTMS
S
OEt
OH O
2a (1 equiv) Ph CH2Cl2, -78 °C, 3 h
S
S
OEt
88% yield Ni2B-H2
(24)
OH O Ph
OEt
85% yield, 98% ee (S)
A very short asymmetric synthesis of the bryostatin C1 aC9 segment has been achieved using three sequential 2a-promoted aldol reactions under reagent control [17f ]. This synthetic methodology is based on the direct asymmetric incorporation of two acetate and one isobutyrate synthones into a framework (Scheme 2.1). The 2a-promoted asymmetric aldol reaction of a variety of aldehydes with a silyl nucleophile derived from phenyl propionate (E isomer 98%) results in moderate anti diastereoselectivity with relatively low enantioselectivity. On the other hand, with pivalaldehyde and the silyl nucleophile derived from ethyl propionate (E/Z ¼ 85:15), the syn isomer is obtained as a major product (22:1) with 96% ee (Eq. (25)) [17g]. This unexpected switching of diastereoselectivity observed in the reaction of the bulky aldehyde can be explained by merging Corey’s hydrogen-bond model between the aldehyde hydrogen and the catalyst borane-ring oxygen [18e] and Yamamoto’s ex-
37
38
2 Boron and Silicon Lewis Acids for Mukaiyama Aldol Reactions
HO MeO2C
OAc
9
O
OH OH OH O
7
1
O
BnO OH
OH O
OEt
O O
AcO
OH CO2Me Bryostatin
CHO +
BnO
S
OTMS
1. (R)-2a (1 equiv) CH2Cl2, -78 °C, 8 h
S
OEt
2. Ni2B-H2
OH CO2Et
BnO >98% ee OTMS
S 1.
OTBDMS CHO
1. TBDMACl 2. DIBAH
BnO
TBDMSO
OH O
BnO
S OEt (S)-2a (1 equiv) CH2Cl2, -78 °C, 8 h 2. Ni2B-H2
TBDMSO
1. TBDMACl OEt
2. DIBAH
BnO
OTBDMS CHO
~100% de OTMS 1. OEt (R)-2a (1 equiv) CH2Cl2, -78 °C, 3 h 2. Ni2B-H2
TBDMSO
TBDMS O OH O
BnO
OEt ~100% de
Scheme 2.1
tended transition model 3 (see also Figure 2.4) [19] as depicted in Figure 2.2, where 4 is destabilized by gauche interaction between the methyl and tert-butyl groups. Important limitations have been observed with regard to reagent control in reactions with highly sterically hindered aldehydes involving a chiral hydroxy function at the b-position (Eq. (26)) [17g]. When (S)-2a is used for 5, the diastereo- and enantioselectivity are less satisfactory. When (R)-2a,
2.2 Chiral Boron Lewis Acids
Ts
BH O O Me H
H t-Bu O
Ts
i-Pr
N
O
>>
N
i-Pr
BH O O H H
Me t-Bu
O
O
O
O 4
3 Fig. 2.2
Kiyooka’s transition-state models.
OTMS t-BuCHO + OEt OH O
(S)-2a (1 equiv) CH2Cl2 –78 °C, 3 h
t-Bu
OH O OEt
+
ð25Þ
t-Bu
OEt
22:1 96% ee
95% ee
is used, however, the reaction proceeds more smoothly to give the corresponding aldols with moderate syn selectivity in 87% yield. Each of the isomers obtained is almost enantiomerically pure. The spatial orientation of the siloxy group at C-3, which is presumably fixed by introduction of two methyl groups at C-2, affects the entire conformation of the aldehydes, and when the chiral borane coordinates to the aldehyde an adequate fit might be needed between the stereocenters of the reagent and the substrate (at C3) for the stereochemical outcome expected from reagent control. Reaction with (S)-2a loses reagent control because of stereochemically mismatched interactions. Even in such complex circumstances, however, the reaction with (R)-2a gives products with stereochemistry at C-3 similar to that expected on the basis of reagent control. Effective approach of the silyl nucleophile might occur via a path similar to 11 in Figure 2.3.
Me TMSO Blocking
Me TMSO
Me H
O H B O 10
Fig. 2.3
Kiyooka’s transition-state models.
2a part
Me H
O H B O 11
Nu
39
40
2 Boron and Silicon Lewis Acids for Mukaiyama Aldol Reactions
TBDMSO
OTMS 2 CHO 3
2a (1 equiv)
OTMS +
1
OEt
CH2Cl2 –78 °C, 24 h
5 TMSO
OH O
TBDMSO
TMSO OEt
+
TBDMSO
OEt 7
6 TMSO +
OH O
TBDMSO
OH O
TMSO OEt
+
OH O
TBDMSO
8
OEt 9
(S)-2a
34% yield, syn(6+8):anti(7+9)=2:1, 6:8=7:5, 7:9=5:3
(R)-2a
87% yield, syn(6+8):anti(7+9)=4:1, 6:8=>50:1, 7:9=>50:1
ð26Þ
2.2.3
Chiral Boron Lewis Acids as Catalytic Reagents
CAB 12, R ¼ H, derived from monoacyloxytartaric acid and diborane, is an excellent catalyst (20 mol%) for the Mukaiyama condensation of simple enol silyl ethers of achiral ketones with a variety of aldehydes. The reactivity of aldol-type reactions can be improved without reducing enantioselectivity by using 10–20 mol% 12, R ¼ 3,5-(CF3 )2 C6 H3 , prepared from 3,5-bis(trifluoromethyl)phenylboronic acid (13) and a chiral tartaric acid derivative. Enantioselectivity could also be improved, without reducing the chemical yield, by using 20 mol% 12, R ¼ o-PhOC6 H4 , prepared from o-phenoxyphenylboronic acid and a chiral tartaric acid derivative. The 12-catalyzed aldol process enables preparation of adducts highly diastereo- and enantioselectively (up to 99% ee) under mild reaction conditions [19a,c]. These reactions are catalytic, and the chiral source is recoverable and reusable (Eq. (27)). The relative stereochemistry of the major adducts is assigned to be syn, and the predominant re-face attack of enol ethers at the aldehyde carbonyl carbon has been confirmed when a natural tartaric acid derivative is used as Lewis acid ligand. The use of an unnatural form of tartaric acid as a chiral source gives the other enantiomer, as expected. Almost perfect asymmetric induction is achieved with the syn adducts, reaching 99% ee, although a slight reduction in both enantio- and diastereoselectivity is observed in reactions with saturated aldehydes. Irrespective of the stereochemistry of the starting enol silyl ethers generated from ethyl ketone, syn aldols are obtained with high selectivity in these reactions. The observed high syn selectivity, and its lack of dependence on the stereoselectivity of the silyl enol ethers, in 12-catalyzed reactions are fully consistent with Noyori’s TMSOTf-
2.2 Chiral Boron Lewis Acids
Oi-Pr O 1)
OTMS R1CHO + R2
HO
R3
O O B Oi-Pr 12 (10~20 mol%) R HO EtCN, -78 °C
HO Ph
(99%), 88% ee (12 (10 mol%), R=3,5-(CF3)2C6H3) HO
O
Ph
HO
Ph
Ph
O Et
(99%), 96% ee syn syn:anti=94:6 (12 (20 mol%), R=H)
O
Pr
(83%), 97% ee syn syn:anti=>95:5 (12 (20 mol%), R=3,5-(CF3)2C6H3)
HO
(92%), 96% ee syn syn:anti=99:1 (12 (10 mol%), R=3,5-(CF3)2C6H3)
O
R3 R2
O
Ph
O
R1
2) 1N HCl
O
Ph
CO2H O
HO Et
(27)
O Et
(61%), 88% ee syn syn:anti=80:20 (12 (20 mol%), R=H)
(95%), 93% ee syn syn:anti =94:6 (12 (20 mol%), R=3,5-(CF3)2C6H3)
catalyzed aldol reactions of acetals, and thus might reflect the acyclic extended transition state mechanism postulated in the latter reactions (Figure 2.4). Judging from the product configurations, 12 (from natural tartaric acid) should effectively cover the si face of the carbonyl after its coordination, and selective approach of nucleophiles from the re face should result. This behavior is totally systematic and in good agreement with the results from previously described 12-catalyzed reactions for all of the aldehydes examined. A catalytic enantioselective aldol-type reaction of ketene silyl acetals with achiral aldehydes also proceeds smoothly with 12, R ¼ H; this can furnish erythro b-hydroxy esters with high optical purity (Eq. (28) [19b,c]. R2
TMSO
H H
TMSO
R
R1
O
CAB
<
anti Fig. 2.4
Extended transition-state model.
H
2
R
R H
syn
R1 O
CAB
41
42
2 Boron and Silicon Lewis Acids for Mukaiyama Aldol Reactions
OTMS R
1CHO
+ R2
HO
1) 12 (R=H, 20 mol%) EtCN, -78 °C
Ph
HO OPh
OR3 R2
O
Pr
O
R1
OR3 2) TBAF O
HO
HO OPh
Ph
O OPh
(28) 84% ee HO Pr
O
76% ee HO
O
OPh Pr
88% ee syn syn:anti=79:21
92% ee syn syn:anti=79:21 HO OPh
97% ee syn syn:anti=96:4
O OPh
94% ee syn syn:anti=95:5
A remarkable finding is the sensitivity of this reaction to the substituents of the starting silyl ketene acetals. The reactions of silyl ketene acetals derived from more common ethyl esters are totally stereorandom, and give a mixture of syn and anti isomers in even ratios with improved chemical yields. In sharp contrast, the use of silyl ketene acetals generated from phenyl esters leads to good diastereo- and enantioselectivity with excellent chemical yields. The reason for this finding is not clear, but a secondary interaction between electron-rich silyl ketene acetals derived from alkyl esters and Lewis acid might be responsible. Analogous to the previous results with silyl enol ethers of ketones, nonsubstituted silyl ketene acetals lead to lower levels of stereoregulation. On the other hand, propionate-derived silyl ketene acetals lead to high asymmetric induction. Reactions with aliphatic aldehydes, however, result in a slight reduction in optical yields. With phenyl ester-derived silyl ketene acetals, erythro adducts predominate, but the selectivity is usually moderate compared with the reactions of silyl enol ethers. Exceptions are a,bunsaturated aldehydes, for which diastereo-and enantioselectivity are excellent. The observed erythro selectivity and re-face attack of nucleophiles on the carbonyl carbon of aldehydes are consistent with the aforementioned aldol reactions of silyl enol ethers [19]. After the enantioselective aldol reaction using CAB 2a under stoichiometric conditions has been reported by Kiyooka and his colleagues in 1991 [17], Masamune [20], Kiyooka [21a], and Corey [22] and their co-workers all independently developed CAB-catalyzed systems of enantioselective aldol reactions (Eq. (29)). Masamune and colleagues examined several oxazaborolidines derived from a series of simple a-amino acid ligands derivatized as the corresponding N-p-toluenesulfonamides. A dramatic improvement in reaction enantio-
2.2 Chiral Boron Lewis Acids
R2 1
R CHO
2 (20 mol%) OTMS
+ R3
EtCN or EtNO2
X
i-Pr O 2b
TMSO
O
R1
X R2 R3
O
Ts N BH O
O BH N Ts
MeO MeO
(29)
2c
Masamune et al. (for X=OR4 or SR4) O
O
O
BH N SO2C6H4-p-NO2
O BBu N Ts
HN
2d
2e
Kiyooka et al.
Corey et al.
(for X=OR4 or SR4)
(for X=R4)
selectivity was observed when complexes prepared from a,a-disubstituted glycine arylsulfonamides were used. This suggests that the initial aldol adduct must undergo ring-closure to release the final product 15 and to regenerate the catalyst 2 (Figure 2.5) [20]. Slow addition of the aldehyde to the reaction mixture (making enough time available for 14 to undergo ring closure) has often been beneficial in improving the enantioselectivity of the reaction. Kiyooka and his colleagues have reported a straightforward improvement of this reaction to a catalytic version by using an N-p-nitro-
TMSO
O
O
X R1 * R2 R3 15
R
O BR" N SO2R' 2
R'SO2N
B O
O R"
TMS
O
X R1 * R2 R3 14 Fig. 2.5
The proposed catalytic cycle.
+
R2 OTMS
R3
O R
R1CHO
X
43
44
2 Boron and Silicon Lewis Acids for Mukaiyama Aldol Reactions
benzenesulfonyl-derived ligand and nitroethane instead of dichloromethane as solvent [21a]. Product enantioselectivity has also been optimized as a function of substitution of the arylsulfonamide. (Eq. (30)) [20]. Thus, for complexes with the general structure 2c, the enantiomeric excess of the benzaldehyde adduct varies along the series R 0 ¼ 3,5-bis(trifluoromethyl)phenyl (52% ee); mesityl (53% ee); 1-naphthyl (67% ee); 2-naphthyl (78% ee); 4-tertbutylphenyl (81% ee); phenyl (83% ee); 4-methoxyphenyl (86% ee); 4acetamidophenyl (86% ee). O
OSiMe3 PhCHO
+
O BH N SO2R'
MeO MeO
OH
(20 mol%)
OEt
EtCN
Ph
CO2Et
F3C Ar= X
CF3 52% ee
53% ee
67% ee
78% ee
X=t-Bu: 81% ee X=H: 83% ee X=MeO 86% ee X=AcNH 86% ee
ð30Þ An AM1-optimized structure of the chiral borane complex was used as the centerpiece of a model proposed by Kiyooka and co-workers to account for the stereochemical outcome of the reaction (Figure 2.6) [21a]. It was suggested the aldehydes coordinate with the boron on the face opposite the isopropyl substituent, thereby minimizing steric interactions. The Kiyooka model places the formyl-H over the five-membered ring chelate subtending an obtuse HaBaOaC dihedral angle. Analogous modes of binding have i-Pr O O O S N B O H
i-Pr O O O S N B O H
O
O
H
R O 2N The Kiyooka model
H
R O 2N The Corey model
Fig. 2.6
The proposed transition-state models.
2.2 Chiral Boron Lewis Acids
been proposed in other chiral acid boron compounds that have been ingeniously used for Diels–Alder cycloaddition reactions [23]. The preference for this orientation might result from presence for a stabilizing anomeric interaction. Alternatively, the bound aldehyde might be locked in the conformation invoked by Kiyooka as a result of a formyl CaH hydrogen bond to the acyloxy donor, in accordance with the bonding model proposed by Corey [18e, 21a]. Kiyooka et al. reported that the 2d-catalyzed aldol reaction of a silyl ketene acetal involving a dithiolane moiety with a b-siloxy aldehyde results in the production of syn- and anti-1,3-diols with complete stereoselectivity if the stereochemistry of the catalyst is chosen appropriately [21b]. This method has been applied to enantioselective synthesis of the optically pure lactone involving a syn-1,3-diol unit, which is known to be a mevinic acid lactone derivative of the HMG-CoA reductase inhibitors mevinolin and compactin (Scheme 2.2).
HO
O
HO
O
O
O
O
O Ph R R=H: Mevinolin R=Me: Compactin OTMS
S CHO +
Ph
S
OEt
1. 2d (20 mol%) EtNO2, -78 °C, 1 h
OH CO2Et
Ph
2. Ni2B-H2
>98% ee OTMS
S 1.
OH
1. TBDMACl Ph
2. DIBAH
S OEt 2d (20 mol%) EtNO2, -78 °C, 1 h CHO
2. Ni2B-H2 HO
TBDMSO
OH
100% de Scheme 2.2
O
1. Bu4NF CO2Et
Ph
O
2. TsOH Ph
45
46
2 Boron and Silicon Lewis Acids for Mukaiyama Aldol Reactions
Corey et al. used 2e in the conversion of aldehydes to 2-substituted 2,3dihydro-4H-pyran-4-ones by reacting them with 1-methoxy-3-trimethylsilyloxy-1,3-butadiene in propionitrile at 78 C for 14 h and then treating them with trifluoroacetic acid (Eq. (31)) [22]. OTMS R1CHO
2e (20 mol%)
+ EtCN, -78 °C OMe
R1
O
TMSO
(31) CF3CO2H
R1
O O
OMe
67-82% ee
Corey’s tryptophan-derived chiral oxazaborolidine 2e is highly effective for not only the Mukaiyama aldol reaction of aldehydes with silyl enol ethers [22] but also the Diels–Alder reaction of a-substituted a,b-enals with dienes [23], although more than 20 mol% 2e is required for the former reaction. Other chiral oxazaborolidines that have been developed for enantioselective aldol reaction of aldehydes with relatively more reactive ketene silyl acetals also require large amounts (more than 20 mol%) to give aldol adducts in good yield [20, 21]. Yamamoto and his colleagues succeeded in enhancing the catalytic activity of CAB derived from 2,6-di(isopropoxy)benzoyltartaric acid and borane.THF by using 13 instead of borane.THF [19c]. In a similar manner they developed a new and extremely active Corey’s catalyst, 2f, using arylboron dichlorides bearing electron-withdrawing substituents as Lewis acid components [24]. A new chiral oxazaborolidine catalyst 2f has been prepared by treating N-( p-toluenesulfonyl)-(S)-tryptophan with an equimolar amount of 3,5bis(trifluoromethyl)phenylboron dichloride (15) in dichloromethane and subsequent removal of the resulting HCl and the solvent in vacuo (Scheme 2.3). Moisture-sensitive boron dichloride 15 and boron dibromide 16 are synthesized by dehydration of 13 to trimeric anhydride 14 and subsequent halogenation of 14 with 2 equiv. of BCl3 and BBr3, respectively [24]. The preparation of oxazaborolidines from arylboron dichlorides has been also reported by Reilly and Oh [25] and Harada and co-workers [26]. Although Bbutyloxazaborolidine 2e has been prepared from N-( p-toluenesulfonyl)-(S)tryptophan and butylboronic acid by dehydration [22], B-aryloxazaborolidine cannot be prepared from arylboronic acid, as observed by Nevalainen et al. [27] and by Harada et al. [26b]. In contrast, CAB derived from 2,6di(isopropoxy)benzoyltartaric acid in place of N-sulfonylamino acids has been easily prepared by adding an equimolar amount of the corresponding arylboronic acid at room temperature [19c]. According to Corey and co-workers [22], terminal trimethylsilyloxy (vinylidene) olefins seem to be more suitable substrates for enantioselective Mu-
2.2 Chiral Boron Lewis Acids
CF3 benzene (HO)2B
trimer 14
azeotropic reflux (CaH2), 2~4 h
CF3 13
CF3 1. BX3 (2 equiv) hexane or heptane reflux, several hours 2. distillation
X2B CF3
15 (X=Cl) or 16 (X=Br) ca. 40~50% yield from 13 CF3 O HN
OH
1. 15, CH2Cl2, rt, 1 h
NH Ts
2. pump on 3. EtCN
O
O B N Ts 2f
HN
CF3
Scheme 2.3
kaiyama aldol coupling catalyzed by 2e than more highly substituted olefins such as RCHbC(OSiMe3 )R 0 or R2 CbC(OSiMe3 )R 0 . In fact, reaction of the trimethylsilyl enol ether derived from cyclopentanone with benzaldehyde afforded the aldol products in only 71% yield even in the presence of 40 mol% 2e [22]. According to Yamamoto et al. [24], reaction of benzaldehyde with the trimethylsilyl enol ether derived from acetophenone in the presence of 10 mol% 2e gives the trimethylsilyl ether of aldol and the free aldol in yields of only 38% and 15%, respectively (Eq. (32)). When the B-3,5-bis(trifluoromethyl)phenyl analog 2f is used, however, catalytic activity and enantioselectivity are increased to a turnover of 25 and 91–93% ee, respectively. The absolute configuration of the aldol adducts is uniformly R.
PhCHO +
OSiMe3 Ph
cat. 2
Me3SiO
EtCN, –78 °C
Ph
2e (10 mol%): 2f (10 mol%): 2f (4 mol%):
O
HO
O
+ Ph
38% yield, 82% ee 91% yield, 93% ee 94% yield, 91% ee
Ph
Ph
ð32Þ
15% yield, 82% ee 4% yield, 68% ee 4% yield, 72% ee
These results indicate that introduction of an electron-withdrawing substituent such as the 3,5-bis(trifluoromethyl)phenyl group to the B atom of
47
48
2 Boron and Silicon Lewis Acids for Mukaiyama Aldol Reactions
chiral boron catalysts is an effective method for enhancing their catalytic activity. The method is especially attractive for large-scale synthesis (Eq. (33)).
PhCHO + 10 mmol
OSiMe3 Ph 12 mmol
1. 2f (5 mol%), EtCN, –78 °C, 5 h 2. 1M HCl-THF
HO
O
Ph Ph 2.23 g, 99% yield 94% ee (R)
ð33Þ
CAB 2d is effective for reaction not only with terminal trimethylsilyloxy olefins but also trisubstituted (E)- and (Z)-trimethylsilyl enol ethers (Table 2.1). In the reaction of aromatic aldehydes such as benzaldehyde with the trimethylsilyl enol ether of cyclohexanone, both substrates should be sequentially added to a solution of 2f in propionitrile at 78 C according to Corey’s procedure (method A) [22]. The reaction proceeds quantitatively to give only the aldol products in a 78:22 syn/anti ratio, and the optical yield of the syn isomer 17 is 89% ee. Reaction of aliphatic aldehydes such as isobutyraldehyde with the same silyl enol ether does not proceed well, however, probably because of decomposition of isobutyraldehyde in the presence of the strong Lewis acid 2f before addition of the trimethylsilyl enol ether. On the other hand, sequential addition of silyl enol ethers and aldehydes to a solution of catalyst 2f (method B) gives the aldol adducts in higher yield, but the enantioselectivity is relatively low. High enantioselectivity is also observed in the reaction with acyclic (E)- and (Z)-silyl enol ethers. Reaction with (Z)-trimethylsilyl enol ethers also gives syn aldol adducts as major diastereomers. The syn preference and the absolute preference for carbonyl re-face attack observed in the reactions of aldehydes with (E)- and (Z)-trimethylsilyl enol ethers suggests that the reaction occurs via an extended-transition state assembly (Figure 2.7) [19, 22]. Anti preference has been observed in the reaction of aldehydes with (E)-ketene trimethylsilyl acetals catalyzed by other chiral oxazaborolidines [20, 21]. Harada and co-workers reported that arylboron complex 2g derived from N-tosyl-(aS,bR)-b-methyltryptophan [23] and ( p-chlorophenyl)dibromoborane is an excellent catalyst for enantioselective ring-cleavage reactions of 2substituted 1,3-dioxolanes with enol silyl ethers [26c]. Interestingly, chiral boron complexes prepared by reacting the sulfonamide ligands with BH3 THF do not have appreciable catalytic activity [26a,b]. Successful results have been obtained in the ring cleavage of 1,3-dioxolanes with aryl and alkenyl groups at the 2-position. Reaction of 2-alkyl derivatives is, however, very sluggish under these conditions. The 2-hydroxyethyl group in the ring-
2.2 Chiral Boron Lewis Acids Tab. 2.1
Mukaiyama aldol reaction of aldehydes with (E)- and (Z)-silyl enol ethers OSiMe3 R1CHO
R2
+
EtCN, –78 °C, 12 h
R3 OH O
R1
OH O R2
Ph
cat. 2f (5 or 10 mol%)
R2
+ Ph
R3
R3
17
18
Silyl Enol Ether
Methoda
Yield (%)b
17:18c
ee (%)d 17
18
OSiMe3
Ph i-Pr
Pr
OSiMe3
A Ae
>99 36
78:22 77:23
89 96
5 96
B
>99
48:52
95
93
A B B B Be B B
23 >99 >99 >99 94 85 92
>99:1 >99:1 62:38 97:3 83:17 95:5 89:11
96 >99 92 98 92 97 90
– – 77 – 91 – 58
f
Et
Pr Pr Pr i-Pr i-Pr (E)-MeCHbCH PhCcC
Ph (>99:1) Ph (>99:1) Et (97:3) Ph (>99:1) Et (97:3) Ph (>99:1) Ph (>99:1)
a Method A: A solution of silyl enol ether (0.96 mmol) in propionitrile (0.32 mL) was added over 2 min to a mixed solution of 2f (0.08 mmol) and an aldehyde (0.8 mmol) in propionitrile (0.65 mL). Method B: A solution of aldehyde (0.8 mmol) in propionitrile (0.32 mL) was added over 10 min to a mixed solution of the silyl enol ether (0.96 mmol) and 2f (0.08 mmol) in propionitrile (0.65 mL). b Isolated yield. c Determined by 1 H NMR analysis. d Determined by HPLC. e 5 mol% of 2d was used. f E:Z ¼ 70:30.
cleavage products can be removed simply by conversion to the iodides then treatment with zinc powder (Eq. (34)). Desymmetrization of meso-1,2-diols has been realized by chiral Lewis acid 2h-mediated enantioselective ring-cleavage of dioxolane derivatives [26d]. Transacetalization of 3,3-diethoxy-1-phenylpropyne with meso-2,3-butanediol gives a 86:14 mixture of syn- and anti-19 stereoselectively. Treatment of syn19 with 3 equiv. Me 2 CbC(OTMS)OEt and 1.0 equiv. 2h at 78 C gives the ring-cleavage product 20 (> 20:1 diastereoselectivity) in 72% yield with 94%
49
50
2 Boron and Silicon Lewis Acids for Mukaiyama Aldol Reactions
π-π stacking
HN
R1 H O
O
O B
S
Me3SiO R
H
O
O R2
1
R3
R3 re-face attack CF3
N O
OSiMe3
R2
CF3
CH3 Fig. 2.7
Proposed extended-transition state assembly.
O NH
1.
B N Ts 2g (10 mol%) CH2Cl2, –20 °C
R3 O
O
+
R2
R1
OSiMe3
Cl
2. TBAF
R2 HO
O R
O
O
1
OH
1. I2, PPh3 R3
R 2. Zn
R2 R2
O
1
(34) R3
R2 R2
Examples HO
O
HO
O
Ph
OEt
O O
HO
O
O
O StBu
Ph MeO
88% yield 86% ee
73% yield 93% ee
80% yield 85% ee
ee (Eq. (35)). A separate experiment using pure anti-19 showed that it is unreactive under these conditions. Boron complex 2h is also effective in the ring-cleavage of other dioxolanes that can be prepared stereoselectively (syn:anti > 20:1) from the diols under kinetically controlled conditions. The
2.2 Chiral Boron Lewis Acids
results obtained by using other catalysts, for example 2i and 2j, suggest that the structure of the N-sulfonyl moiety affects the enantioselectivity.
O
O
Ph
2h (1 equiv)
Ph OH + HO
O
O
OEt CO2Et
EtO2C
OTMS
Ph syn-19
20 (major)
ent-20 (minor)
(3 equiv)
Ph
O
2h: R1=tol → 20: 94% ee
O O2S N B R1 Ph
2i: R1=Me → 20: 48% ee 2j:
R1
ð35Þ
=CF3 → 20: 58% ee
Other examples
Et
Et
Ph
Ph O
OH
CO2Et 2h → 96% ee
Ph O
OH
CO2Et 2h → 93% ee
O
OH
CO2Et 2h → 85% ee
Itsuno et al. have developed novel polyaddition reactions based on the Mukaiyama aldol reaction of silyl enol ethers with aldehydes. Bis(triethylsilyl enol ether) and bis(triethylsilyl ketene acetal) are prepared as stable and isolable monomers. In the presence of Lewis acid catalysts these monomers react smoothly with dialdehydes to afford the poly(b-hydroxy carbonyl) compounds. By asymmetric synthetic polymerization of such monomers with chiral modified Lewis acid it is possible to obtain optically active poly(b-hydroxycarbonyl) compounds with main-chain chirality [28]. For example, CAB 21, which is highly efficient in the asymmetric aldol reaction of silyl enol ether with aldehyde, has been examined as a chiral catalyst for asymmetric aldol polymerization of 22 with 23. Unfortunately, CAB 21 is not sufficiently active to polymerize these monomers at 78 C. Increasing the temperature made it possible to obtain the chiral polymer in low yield, accompanied by partial decomposition of the catalyst. The polymer obtained is optically active, however (Eq. (36)) [28a]. Silyl ketene acetals also react enantioselectively with aldehydes in the presence of a chiral Lewis acid. Several useful chiral Lewis acids have recently been developed for this reaction. Itsuo et al. found that Kiyooka’s catalyst 2a.SMe 2 acts as a chiral catalyst of asymmetric aldol polymerization
51
52
2 Boron and Silicon Lewis Acids for Mukaiyama Aldol Reactions
OMe O
CO2H O O
O O B•SMe 2 H 21 (50 mol%) OMe
OSiEt3 CHO +
CH2Cl2, –78 °C to –20 °C
OHC OSiEt3 22
23
O
OSiEt3
Et3SiO
O
5% yield, Mn=1300, Mw/Mn=1.67, [Φ]=–64
ð36Þ
OHC
OSiEt3 O
O
+
O
O
O
OSiEt3
O
24 O O 2a•SMe2 (200 mol%) CH2Cl2, –78 °C
CHO
25
O
OSiEt3
O
O O
O O
Et3SiO 62% yield, Mn=1900, Mw/Mn=2.21, [Φ]=–49
ð37Þ of 24 with 25 even at 78 C. The aldol polymer with optical activity is again obtained in 62% yield (Eq. (37)) [28a]. Itsuno and co-workers also reported that CAB 2d is a more effective catalyst than other chiral oxazaborolidines 2 for asymmetric polymerization of bis(triethylsilyl enol ether)s and dialdehydes [28b]. The reactivity of dialdehydes containing ether linkages is quite low for formation of polymers, mainly because of the low solubility of dialdehyde monomers in propionitrile. Introduction of a silyl group into the monomeric structure of the dialdehyde dramatically improves the solubility. The asymmetric polymerization of silyl-containing dialdehyde 26 with 22 affords the chiral polymer in high yield with high molecular weight (Eq. (38)). This polymer is soluble in
2.3 Silicon Lewis Acids
O
O
22 + H
2d (20 mol%)
H
EtCN, –78 °C to –20 °C
Si Me2 26
O
O
OSiEt3
Et3SiO
ð38Þ
Si Me2
71% yield, Mw=48200, Mw/Mn=10.3, [Φ]435=1670
common organic solvents such as THF, CH2 Cl2 , CHCl3 , DMF, and DMSO. All the chiral polymers obtained using 2d as catalyst have positive optical rotation.
2.3
Silicon Lewis Acids 2.3.1
Introduction
Silicon Lewis acids have advantages over traditional metal-centered activators. For example, silicon Lewis acids are compatible with many synthetically valuable C-nucleophiles, such as silyl enol ethers. Unlike metal halides, silicon Lewis acids are not prone to aggregation, which substantially simplifies the analysis of the reaction mechanisms. Furthermore, the reactivity of silicon Lewis acids of R3 SiX structure can be finely controlled by varying the steric volume of alkyl substituents. The most advantageous circumstance is the opportunity to realize the processes in the presence of catalytic amounts of silicon Lewis acids if silicon Lewis acids and silyl enol ethers have identical trialkylsilyl fragments. Thus, depending on the type of electrophile, two mechanistically different pathways can be considered (Scheme 2.4). For acetals and acetal-like compounds, silicon Lewis acids abstract the heteroatomic substituent, followed by reaction of electrophilic species formed with a nucleophile (left circle). When the substrates have a carbon–heteroatom double bond (e.g. carbonyl compounds, imines) silicon Lewis acids bind to their basic function leading, after carbon–carbon bond formation, to products containing the silyl group (right circle). The approach generalized in Scheme 2.4 was first realized by Noyori and co-workers in the early eighties [29]. Subsequently silicon Lewis acid gained wide acceptance as mediators of a variety of transformations. This section
53
54
2 Boron and Silicon Lewis Acids for Mukaiyama Aldol Reactions
Y–E Y–E R3SiY +
E+X–
R3Si–Y+=E X–
Nu–SiR3
Nu–SiR3 R3SiX
E–Nu+–SiR3 X
R3Si–Y–E–Nu+–SiR3
–
X– E–Nu
R3Si–Y–E–Nu
Scheme 2.4
surveys data on the behavior of silicon Lewis acids of general formula R3 SiX in Mukaiyama aldol reactions [30]. 2.3.2
Lewis Acidity of Silicon Derivatives
In the last two decades, the problem of observation of trialkylsilyl cations R3 Siþ , apparently the strongest silicon Lewis acids, attracted considerable attention. According to the results of ab initio calculations [31] and experimental data [32] the equilibrium shown in Eq. (39) is substantially to the right. R3SiH + R3C+
R3Si+ + R3CH
(39)
Correspondingly, R3 Siþ can be readily formed in the gas phase where they can be characterized and studied [33]. Observation of these cations in the condensed state (in solution or in the crystalline state) is, however, very difficult [34]. Nevertheless, Lambert demonstrated recently that silyl cations containing bulky substituents which hinder the approach of nucleophilic reagents to the silicon atom can be observed in solution. He succeeded in detecting Mes3 Siþ B(C6 F5 )4 ( 29Si NMR d (ppm) ¼ 225.5) [35], or Dur3 Siþ B(C6 F5 )4 ( 29Si NMR d ¼ 226:8) [36] (Mes ¼ 2,4,6-trimethylphenyl, Dur ¼ 2,3,5,6-tetramethylphenyl) in benzene, the chemical shifts being very close to the calculated value (d (Mes3 Siþ , calcd.) ¼ 230.1) [37]. Hence, covalent compounds of the type R3 SiX, where X is either the conjugated base of a strong acid (for example CF3 SO2 or ClO4 ) or a solvent molecule (for example, MeCN), generally serve as Lewis acids in carbon– carbon bond-forming reactions. Several approaches have been proposed for estimation of the Lewis acidity of R3 SiX. One of these assumes that the positive charge on the silicon atom is proportional to the chemical shift in 29Si NMR spectra. This scale can,
2.3 Silicon Lewis Acids
however, only be used as a reliable indication of the relative reactivity of compounds in which the silicon atom is bound to the same heteroatom. Another procedure for estimating the Lewis acidity of Me3 SiX, suggested by Hergott and Simchen, is based on comparison of the silylation rate constants of cyclopentanone and diisopropyl ketone with these reagents in the presence of triethylamine in dichloroethane [38]. Bassindale et al. have proposed estimating the strength of silicon Lewis acids from their ability to form the N,N-bis(trimethylsilyl)imidazolium cation in reactions with Ntrimethylsilylimidazole [39]. On the basis of results from studies of the kinetics and thermodynamics of this reaction, silicon Lewis acids were arranged Me3 SiCl < Me3 SiBr < Me3 SiI < Me3 SiOTf < Me3 SiClO4 in order of silyl-donating capacity. Although quantitative data on Me3 SiNTf2 and Me3 SiN(SO2 F)2 derivatives are lacking, the results of comparative experiments provide evidence that these reagents are much more reactive than Me3 SiOTf. The results obtained by different research groups make it possible to arrange the most commonly used neutral silicon Lewis acids in the quantitative activity series: Me3 SiCl < Me3 SiOMs < Me3 SiOTs < Me3 SiBr f Me3 SiOTf A Me3 SiOSO2 F a Me3 SiI a Me3 SiClO4 < Me3 SiN(SO2 F)2 < Me3 SiNTf2 . Positively charged species such as MeCNaSiMe3 þ or complexes generated from neutral silicon Lewis acids and metal-centered Lewis acids might be even more reactive than Me3 SiNTf2 . 2.3.3
Silicon Lewis Acids as Catalytic Reagents
The reactions of carbonyl compounds with silyl enol ethers can be described by the mechanism shown in Scheme 2.5. Thus, the reaction of a substrate with a silicon Lewis acid initially affords a five-coordinate complex 27 which can exist in equilibrium with cation 28 [40]. Subsequent nucleophilic attack on the carbon atom of complexes 27 or 28 is accompanied by formation of the carbon–carbon bond to give intermediate 29 or 30, respectively. The intermediate 30 is rapidly transformed into the final product 31. The position of the equilibrium between RCHO þ Me3 SiX, 27, and 28 depends on the cation-stabilizing effect of the substituents R1 and R2 and on the nature of the leaving group X. Attempts to observe complexes 27 or 28 generated from benzaldehyde and Me3 SiOTf by NMR spectroscopy have failed (only the starting component provided unambiguous evidence of a very small contribution of 27 and 28 to the equilibrium mixture). Hence, it can be tentatively assumed that cation 28 is not formed if the SiaX bond is sufficiently strong, e.g. an SiaO bond. Neutral complex 27, in turn, is a much weaker electrophile than 28 or the oxocarbenium cation generated from acetals on elimination of the alkoxy group. Consequently, one would expect carbonyl compounds to be less reactive than the corresponding acetals in reactions with nucleophiles.
55
56
2 Boron and Silicon Lewis Acids for Mukaiyama Aldol Reactions
SiMe3
+
O
R2
R1 X–
O R2
R1
+
+ Me3SiX
–
O
28
X SiMe3 R2
R1
Nu–SiMe3 O R1
Nu–SiMe3 –
27
O R1
X SiMe3
SiMe3 +
R2 30
Nu SiMe3 X–
+
R2
Nu SiMe3
–Me3SiX
29 O R1
SiMe3
Nu R2 31
Scheme 2.5
The different reactivity of the acetal and carbonyl groups is demonstrated by the bifunctional substrate 32, which reacts with 1-trimethylsiloxycyclohexene exclusively at the acetal fragment (Eq. (40)) [41]. OSiMe3
OMe +
O
MeO 32
Me3SiOTf
(40) O
OMe O
In the early 1980s, Noyori demonstrated that aldehydes and ketones do not react with 1-siloxycyclohexene in the presence of Me3 SiOTf in CH2 Cl2 at 78 C [30, 41, 42]. The reaction of benzaldehyde with 1-trimethylsiloxycyclohexene catalyzed by Me3 SiOTf proceeds only at room temperature to give the target silyl ether of aldol (in toluene the yield was 60%, syn:anti ¼ 49:51) or benzylidene-cyclohexanone (in CH2 Cl2 , 85%). Aliphatic aldehydes are not involved in this reaction. According to results from other studies benzaldehyde reacts smoothly with silyl enol ethers on catalysis by Me3 SiOTf (5 mol%) in CH2 Cl2 at 78 C to give the silyl ether of aldol in 89% yield in the ratio syn:anti ¼ 63:37 [43]. The latter reaction is probably catalyzed by traces of TfOH rather than by Me3 SiOTf itself. Reaction of trimethylsiloxycyclohexene with benzaldehyde or isobutyraldehyde in the presence of 5 mol% TfOH in CH2 Cl2 at 78 C is complete in 30 min to give aldol products in 86% (syn:anti ¼ 69:31) and 82% (syn:anti ¼ 73:27) yields, respectively [41, 44].
2.3 Silicon Lewis Acids
Me3 SiNTf2 , however, a considerably stronger silyl donor than Me3 SiOTf, efficiently catalyzes addition of silyl enol ethers to aldehydes and ketones (Eq. (41)). The reaction is best performed in diethyl ether as solvent at 78 C with as little as 0.5–1.0 mol% silicon Lewis acid, generated in situ from HNTf2 and silyl enol ether. OSiMe3 R2
3. HCl or Bu4NF
R1 R1,
1. 0.5–1.0 mol% HNTf2, Et2O, –78 °C 2. Addition of R3R4CO over 2 h
R2=H,
OH O R3
Alkyl, Ph
R4
R2 1
R
87–92% yield
R3, R4=H, Ph, (CH2)4 Examples (yield) OH O Ph
OH O Ph
Ph
92%
87%
OH O Ph
OH O
92% (syn:anti=70:30)
OH O Ph
88% (syn:anti=76:24) (silyl enol ether, 96% cis)
OH O Ph
87%
(41)
Ph
Ph
Ph 92%
To minimize the formation of side products it is necessary to add the carbonyl compound slowly [45]. The presence of excess molar amounts of carbonyl compounds per desired adducts produced in the reaction concurrently promotes at least three reactions (Scheme 2.6): (1) cyclic trimerization of the aldehyde (path a), (2) dimerization of the desired adducts (path b), and (3) acetalization of the desired adducts (path c). Slow addition of the carbonyl compound to a mixed solution of silyl enol ether and Me3 SiNTf2 is the best way to obtain the desired products selectively. The following mechanism has been proposed for this aldol reaction pathway [45b]. Electrophilic attack of silyl-activated aldehyde species on the silyl enol ether produces cationic species 33 which subsequently acts as a source of Lewis acidic silyl group without regeneration of Me3 SiNTf2 (Scheme 2.7). In accord with such a mechanism is the observation that the silylated aldol initially formed by coupling of benzaldehyde with silyl enol ethers derived from acetophenone contains the silyl group derived from the nucleophile, and not from R3 SiNTf2 (Eqs. (42) and (43) [45b]. In a similar experiment with Me3 SiOTf performed at 78 C a mixture of 34 and 35 is obtained (Eq. (44)), suggesting that after carbon–carbon bond formation the silyl triflate with a silyl group originating from the enol ether is generated.
57
58
2 Boron and Silicon Lewis Acids for Mukaiyama Aldol Reactions
Me3SiNTf2 (1 equiv)
OSit-BuMe2
PhCHO +
Ph
Me3SiO
O
Ph (43) 35 34:35=<1:99
Et2O, –100 °C
Ph
Me3SiOTf (1 equiv)
OSit-BuMe2
PhCHO + 1 mmol
Ph (42) 34 34:35=>99:1
t-BuMe2SiNTf2 (1 equiv)
Ph
O
Ph
Et2O, –100 °C
OSiMe3
PhCHO +
t-BuMe2SiO
34 + 35 Et2O
Ph
(44)
Et2O (50 mL), –100 °C, 0.5 h: 24% yield, 34:35=1:99 Et2O (12.5 mL), –78 °C, 5 h: 61% yield, 34:35=17:83
When, moreover, two enol ethers of different ketones bearing different silyl groups are used simultaneously scrambling of the silyl groups occurs [45b, 46]. These observations indicate that the ligand (X) of the silicon Lewis acid (R3 SiX) plays a crucial role in the Mukaiyama aldol reaction of trimethylsilyl enol ethers (Me3 SiNu). In the R3 SiOTf-induced reaction transfer of TfO from siloxocarbenium ion 36 is expected to occur by electrophilic attack of
–
O R
Me3SiNTf2
+
O
R
H
NTf2 SiMe3
R
O
R
path a O
O
H
R R R O
OSiMe3
Me3SiNu
O R
OSiMe3
Nu
path c
O
R
Nu
R
R Me3SiNu
path b R
O R Scheme 2.6
Nu
Nu Nu
Nu
2.3 Silicon Lewis Acids
–
O R1
+
O
Me3SiNTf2 R1
H
NTf2 SiMe3
NTf2 – Me3Si O
OSiMe3 R2
+O
SiMe3 R2
R1
H
59
33 O R
1
H
NTf2 – Me3Si O
OSiMe3
Me3 H +O Si O R1 –
R2
+
etc.
R2
R1 Scheme 2.7
–
OTf SiR3
OSiMe3
+
O
R1
R2
OTf − R3Si O
+
SiMe3
O
R3SiO
+ Me3SiOTf
R2
R1
R2
R1
H
O
36 Scheme 2.8
the ‘‘Me3 SiaOþ silicon’’ of 36 (Scheme 2.8). Me3 SiOTf would be generated by electrophilic attack of the ‘‘Me3 SiaOþ silicon’’ on the ‘‘SbO oxygens’’ or the ‘‘SaO oxygen’’ of OTf. In the R3 SiNTf2 -induced reaction, in contrast, less nucleophilicity and/or more bulkiness of NTf2 might suppress electrophilic attack of the ‘‘Me3 SiaOþ silicon’’ on the nitrogen or oxygen atoms of NTf2 , and might increase the Lewis acidity of siloxocarbenium ion 33 (Scheme 2.7). Unlike silyl enol ethers, silyl ketene acetals react with aldehydes and ketones on catalysis by Me3 SiOTf [47], and carbonyl compounds often seem to be more reactive in these reactions than their acetals (Eq. (45)) [47b]. Bis(silyl)methylacetoacetate is a synthetic equivalent of the corresponding dianion and its terminal carbon atom is involved in reactions with carbonyl compounds in the presence of Me3 SiOTf, ketones being more reactive than aldehydes (Eq. (46)) [48].
OSit-BuMe2 OEt
O +
+ Ph
MeO OMe
1. Me3SiOTf (10 mol%) CH2Cl2, –78 °C 2. work up
Ph
OH O
OMe O +
Ph
OEt 91% yield
Ph
OEt 0% yield
(45)
60
2 Boron and Silicon Lewis Acids for Mukaiyama Aldol Reactions
OSiMe3
Me3SiO
+
+ n-C5H11
OMe
1. Me3SiOTf (10 mol%) CH2Cl2, –78 °C
O
O
OH O n-C5H11
H
n-C7H15
2. work up OH O
CO2Me +
CO2Me
n-C7H15
52% yield
not detected
ð46Þ
2.3.4
Activation of Silicon Lewis Acids by Combination with Other Lewis Acids
Binding of silicon Lewis acid (R3 SiX) with another Lewis acid (LA) leads to the shift of the electron density from the silicon atom (confirmed by 29Si NMR spectroscopic data). As a consequence, the resulting R3 SiX ! LA complexes are much stronger donors of the silyl group than the starting SLA. Olah and colleagues demonstrated that reaction of Me3 SiBr with AlBr3 produces the Me3 SiBr ! AlBr3 complex ( 29Si NMR, d ¼ 62:7) [49a]. Even SbF5 , one of the strongest Lewis acids, cannot abstract the fluoride anion from Me3 SiF and gives the Me3 SiF ! SbF5 complex ( 29Si NMR, d ¼ 102) rather than the silyl cation [49b]. The possibility of using R3 SiX ! LA complexes as mediators in carbon– carbon bond-forming reactions was first demonstrated by Mukaiyama et al. in 1987 [51]. While quite inactive separately, Lewis acids Me3 SiCl and SnCl2 taken together have properties of strong R3 SiX Lewis acids. Thus, aldehydes, a,b-unsaturated ketones, and acetals smoothly react with silyl enol ethers in the presence of this LA pair (Scheme 2.9). The Me3 SiClaZnCl2 system can function analogously although it is less efficient than Me3 SiClaSnCl2 [50].
O
OH
O
Ph
O
OMe
O Ph
Ph
Ph PhCHO
Ph
OSiMe3 15–20 mol% Me3SiCl 8–12 mol% SnCl2 Ph CH2Cl2, –78 °C O Ph
OMe OMe
Scheme 2.9
HC(OMe)3
EtCH(OMe)2 Ph
O
2.3 Silicon Lewis Acids
It has also been reported that R3 SiCl can be activated by addition of InCl3 [51]. The reactivity of the R3 SiClaInCl3 mixture is highly dependent on the nature of the alkyl groups on the silicon atom. For example, the Me3 SiClaInCl3 system catalyzes the reactions of trimethylsilyl enol ethers both with aldehydes and acetals (Eq. (47)) yet only aldehydes react with tertbutyldimethylsilyl enol ethers in the presence of t-BuMe 2 SiClaInCl3 . This behavior enables selective nucleophilic addition at the carbonyl group in the presence of the acetal fragment (Eq. (48)). Me3SiO
O R1
H or
OSiMe3 +
OMe R1
R3
R3 R2
Me3SiCl/InCl3 (10 mol%) CH2Cl2, –43 °C or –23 °C
R2
O
R1 or MeO
R3
R1
OMe
(47)
O 2
R 68~93% yield O H
MeO
+
OSit-BuMe2
t-BuMe2SiCl/InCl3 (10 mol%) CH2Cl2, –78 °C
OEt OMe
t-BuMe2SiO
(48)
O OEt
MeO OMe 77% yield
Boron and aluminum compounds can also activate R3 SiX, leading to silicon species with very high catalytic activity. The high reactivity of these systems is probably associated with the complete transfer of the silyl group to the carbonyl oxygen atom to form the siloxycarbonium species RCHbOþ SiR3 . The exothermic reaction of B(OTf )3 with Me3 SiOTf gives the Me3 SiB(OTf )4 adduct ( 29Si NMR, d ¼ 62:0). The 11 B NMR spectrum (d ¼ 3:17, Dv1=2 ¼ 28 Hz) corresponds to the B(OTf )4 anion whereas the 13 C NMR spectrum shows the presence of only one trifluoromethyl group (d ¼ 118, q, 1 JC; F ¼ 318 Hz) [52a]. It is highly probable the trifluoromethyl group on this complex very rapidly migrates among all the triflate groups. Trace amounts of Me3 SiB(OTf )4 are sufficient for reaction of aldehydes with silyl enol ethers. In the presence of an asymmetric center adjacent to the carbonyl group, the diastereoselectivity of the process can be changed by varying the volumes of the substituents on the silicon atom (Eq. (49)). Apparently, an increase in the size of the silyl group bound to the carbonyl
61
62
2 Boron and Silicon Lewis Acids for Mukaiyama Aldol Reactions
oxygen leads to limitation of possible pathways of approach of the nucleophile, thereby improving the diastereoselectivity of the reaction (See also Eqs. (3) and (4) [8]) [52b]. A particularly useful property of B(OTf )3 is its ability to form complexes with chlorosilanes R3 SiCl, giving silylating reagents which compare favorably with the R3 SiOTf/B(OTf )3 system [52c]. The possibility of generating very strong silylating reagents based on sterically hindered chlorosilanes enables the use of these compounds instead of more expensive silyl triflates. OSiR3 Me3SiOTf/B(OTf)3 (5 mol%)
+ Ph
CHO
CH2Cl2, –80 °C
Ph
Ph
Ph R3SiO
R3Si
O
(49)
syn : anti 8:1 97 : 1
Me3Si i-Pr3Si
A combination of Me3 SiOTf and sterically hindered organoaluminum compounds MAD or MABR is another example of the formation of very active R3 SiX [53a]. As follows from Eq. (50), these organoaluminum compounds coordinate the triflate anion more efficiently than B(OTf )3 . The Me3 SiOTf/MABR system makes it possible to perform the reactions of silyl enol ethers even with poorly reactive carbonyl compounds, such as pivalaldehyde and methyl isopropyl ketone. The Me3 SiOTf/MAD or MABR/ PhCHO combinations are also useful for initiating cationic polymerization of silyl enolates [53b].
OSiMe3
+ Ph
CHO
Ph
t-Bu R
O t-Bu
1. cat. (5 mol%) CH2Cl2, –78 °C, 1 h 2. HCl
t-Bu O
Al Me
t-Bu
R=Me: MAD; R=Br: MABR
HO cat.
R
Ph
Ph
Me3SiOTf Me3SiOTf/B(OTf)3 Me3SiOTf/MAD Me3SiOTf/MABR MABR
O
yield, %
(50)
15 43 62 76 7
Study of complex formation between benzaldehyde, with MAD, and Me3 SiOTf by 13 C NMR spectroscopy at 50 C showed that addition of 2 equiv. Me3 SiOTf to the PhCHO ! MAD adduct afforded a new electrophilic species of unknown nature. The 13 C NMR spectrum of the latter has a signal which is shifted downfield by approximately 3 ppm compared with the signal of the PhCHO ! MAD complex. This species probably consists of benzaldehyde and two different Lewis acids, and it behaves as a true electrophile, which attacks the double bond of silyl enol ether [53b].
Representative Experimental Procedures
In addition to these examples, it should be noted that activation of R3 SiX might cause undesirable transformations. Thus, it is difficult to achieve high enantioselectivity when performing catalytic asymmetric aldol reactions of aldehydes with silyl enol ethers in the presence of chiral metalcentered Lewis acids. These difficulties are generally attributed to the effect of R3 SiX, which is generated in the early steps of the process and then promotes carbon–carbon cross-coupling yielding a racemic product [45b, 46, 54]. Noyori also demonstrated that aldehydes do not react with silyl enol ethers under the action of Me3 SiOTf [29, 41, 42]. In this connection it is reasonable to assume that the low enantioselectivity observed might result from formation of a complex between R3 SiX and a chiral Lewis acid. Under the action of this complex the trialkylsilyl fragment can transferred to the carbonyl group, producing a racemic product.
Representative Experimental Procedures Typical Procedure for the Mukaiyama Aldol Reaction Catalyzed by B(C6 F5 )3 [13]. An anhydrous solution of B(C6 F5 )3 in toluene (81 mL, 0.02 mmol, 0.247 m) is added dropwise, at 78 C, under argon, to a solution of aldehyde (1.0 mmol) and silyl enol ether (1.2 mmol) in dichloromethane (2 mL). The mixture is stirred for several hours at the same temperature and then 1 m HCl (10 mL) and THF (10 mL) are added. The reaction mixture is stirred for 0.5 h, poured into NaHCO3 solution, extracted with diethyl ether, dried over MgSO4 and concentrated, and the residue is purified by column chromatography on silica gel to give the corresponding aldol in high yield. Preparation of 3,5-Bis(trifluoromethyl)phenylboron Dichloride (15) [24]. A solution of 13 (Lancaster Synthesis; 1 H NMR (C6 D6 , 300 MHz) d (ppm) 7.81 (s, 1H), 8.01 (s, 2H); 3.86 g, 15 mmol) in benzene (30 mL) is heated under reflux with removal of water (CaH2 in a Soxhlet thimble) for 2–5 h (oil bath: 100–105 C) then cooled to room temperature and concentrated in vacuo to give trimeric anhydride 14 as a white solid ( 1 H NMR (C6 D6 , 300 MHz) d 8.01 (s, 1H), 8.46 (s, 2H)). A 1 m solution of BCl3 (30 mL, 30 mmol) in hexane and a 1 m solution of BBr3 (30 mL, 30 mmol) in heptane are added separately to 14 at room temperature under argon. The two reaction mixtures are heated under reflux for 4 h (oil bath 100–105 C) and 56 h (oil bath 105–110 C), respectively, and the solvents are removed by distillation. Dichloroboron compound 15 is isolated as colorless oils by distillation under reduced pressure from the residues in ca. 40–50% yield: 38–40 C (0.05–0.06 torr); 1 H NMR (C6 D6 , 300 MHz) d 7.80 (s, 1H), 8.12 (s, 2H); 11 B NMR (C6 D6 , 96 MHz) d 53.2; 13 C NMR (C6 D6 , 75.5 MHz) d 123.1 (q, J ¼ 272:8 Hz, 2C), 127.1 (s, 1C), 131.0 (q, J ¼ 33:5 Hz, 2C), 134.8–135.2 (m, 1C), 135.5 (s, 2C); 19 F NMR (C6 D6 , 282 MHz) d 64.3.
63
64
2 Boron and Silicon Lewis Acids for Mukaiyama Aldol Reactions
Preparation of Chiral Oxazaborolidine Catalyst 2f [24]. 15 (22.1 mg, 0.075 mmol) is added at room temperature, under argon, to a solution of N-( ptoluenesulfonyl)-(S)-tryptophan [23a] (32.3 mg, 0.09 mmol) in dichloromethane (0.75 mL). The mixture is stirred for 1 h then concentrated in vacuo to give 2f as a white solid. This is dissolved in propionitrile and used for Mukaiyama aldol reactions. 1 H NMR (CD2 Cl2 , 300 MHz) d 2.37 (s, 3H), 3.56 (dd, J ¼ 2:6, 15.0 Hz, 1H), 3.83 (dd, J ¼ 4:5, 15.0 Hz, 1H), 4.56–4.59 (m, 1H), 7.08–7.30 (m, 4H), 7.26 (d, J ¼ 8:1 Hz, 2H), 7.54 (d, J ¼ 8:1 Hz, 2H), 7.82 (d, J ¼ 7:5 Hz, 1H), 7.95 (s, 1H), 8.04 (s, 2H), 8.22 (brs, 1H); 11 B NMR (CD2 Cl2 , 96 MHz) d 33.8; 19 F NMR (C6 D6 , 282 MHz) d 64.2. Representative Procedure for the Mukaiyama Aldol Reaction Catalyzed by 2f (Method A, Table 2.1) [24]. Propionitrile (1 mL) is added at room temperature to 2f (0.075 mmol, 6 mol%) prepared as described above. After being cooled to 78 C, benzaldehyde (127 mL, 1.25 mmol) is added and a solution of 1-phenyl-1-(trimethylsiloxy)ethylene (308 mL, 1.5 mmol) in propionitrile (0.5 mL) is subsequently added dropwise over 2 min. The reaction mixture is stirred at 78 C for 12 h and then quenched by addition of saturated aqueous NaHCO3 . The mixture is extracted with ether and the combined organic phases are dried over MgSO4 and evaporated. The residue is dissolved in THF (2 mL) and 1 m aqueous HCl (2 mL), and the resulting solution is left to stand for 30 min. Saturated aqueous NaHCO3 is added and the mixture is extracted with ether. The combined organic phases are dried over MgSO4 and evaporated to furnish an oily residue. Silica gel chromatography (hexane–ethyl acetate, 4:1) affords 282 mg (> 99% yield) of the known aldol product. The enantiomeric ratio and the absolute configuration are determined by HPLC analysis (Daicel OD-H column with hexane–iPrOH, 20:1, flow rate 1.0 mL min1 ): tR ¼ 21:2 min ((S), minor enantiomer), 24.4 min ((R), major enantiomer). Preparation of Me3 SiOTf [30b]. Allyltrimethylsilane (1.6 g, 14 mmol) is added dropwise, with stirring, to a solution of TfOH (1.5 g, 10 mmol) in dry dichloromethane (8 mL) and the reaction temperature is maintained between 15 and 20 C for 1 h. The resulting mixture is transferred directly to a distillation apparatus and distillation under reduced pressure gives Me3 SiOTf as a colorless liquid (1.9 g, 85%), bp 52–53 C at 31 Torr; 1 H NMR (CDCl3 ) d 0.50 ppm. Preparation of Me3 SiNTf2 [30b]. HNTf2 (0.85 g) is reacted with a 3:1 molar excess of Me3 SiH in an FEP reactor. When the mixture is left to warm from 196 C an initial rapid reaction occurs near 22 C. After 4 h and occasional agitation, the homogeneous mixture is cooled slowly to 196 C. A quantitative amount of hydrogen is recovered and the excess silane is pumped away at 10 C, giving Me3 SiNTf2 (0.98 g, 92%) as a colorless liquid of low volatility. 19 F NMR (CFCl3 ) 77.47 (s) ppm; 1 H NMR 0.57 (s) ppm; major
References
m/e [Cl] 163 (Me3 SiOHþ ), 147 (TfNþ ), 77(?), 73 (Me3 Siþ ) with weak ions at 282 (Tf2 NH2 þ ) and 354 (Mþ ). Preparation of Me3 SiB(OTf )4 [30b]. TfOH (531 mL, 6 mmol) is added to BBr3 (distilled from Al powder; 190 mL, 2 mmol) at 0 C. After evolution of HBr has ceased the flask is evacuated for 1 h to give B(OTf )3 as a viscous yellow liquid. In a separate flask, a solution of Me3 SiOTf is prepared by addition of TfOH (177 mL, 2 mmol) to a solution of allyltrimethylsilane (320 mL, 2 mmol) in dichloromethane (5 mL), and the resulting mixture is left to stand for 10 min. Addition of this solution to the B(OTf )3 at 0 C results in evolution of heat and formation of a pale yellow solution of Me3 SiB(OTf )4 (0.4 m). Typical Procedure for the Mukaiyama Aldol Reaction Catalyzed by Me 3 SiNTf [45a]. Commercially available triflylimide (0.072 m solution in diethyl ether, 1.11 mL, 0.08 mmol) is added at 78 C under argon to a solution of silyl enol ether (8.8 mmol) in diethyl ether (2 mL). After stirring the mixture for 15 min, aldehyde or ketone (1.0 m solution in diethyl ether, 8.0 mL, 8.0 mmol) is added dropwise over a period of 2 h at 78 C. After stirring for 15 min at the same temperature, 1 m HCl (10 mL) and THF (10 mL) are added. The reaction mixture is stirred for 0.5 h, poured into NaHCO3 solution, extracted with diethyl ether, dried over MgSO4 and concentrated, and the residue is purified by column chromatography on silica gel to give the corresponding aldol in high yield. References 1 (a) Ishihara, K. In Lewis Acids in Organic Synthesis;
2 3 4 5 6 7 8 9 10
Yamamoto, H. Ed.; Wiley–VCH: Weinheim, 2000; Volume 1, pp. 89–190. (b) Ishihara, K. In Lewis Acids Reagents; Yamamoto, H. Ed.; Oxford University Press: Oxford, 1999; pp. 31–63. Wulf, W. D.; Gilbertson, S. R. J. Am. Chem. Soc. 1985, 107, 503. Yamago, S.; Machii, D.; Nakamura, E. J. Org. Chem. 1991, 56, 2098. Nakamura, E.; Kuwajima, I. J. Am. Chem. Soc. 1977, 99, 961. Sugimura, H.; Shigekawa, Y.; Uematsu, M. Synlett 1991, 153. Heathcock, C. H.; Flippin, L. A. J. Am. Chem. Soc. 1983, 105, 1667. Evans, D. A.; Gage, J. R. Tetrahedron Lett. 1990, 31, 5053. Davis, A. P.; Plunkett, S. J.; Muir, J. E. Chem. Commun. 1998, 1797. Guindon, Y.; Pre´vost, M.; Mochirian, P.; Gue´rin, B. Org. Lett. 2002, 4, 1019. Kalbaka, G. W.; Tejedor, D.; Li, N.-S.; Malladi, R. R.; Trotman, S. J. Org. Chem. 1998, 63, 6438.
65
66
2 Boron and Silicon Lewis Acids for Mukaiyama Aldol Reactions 11 A review of B(C6 F5 )3 : Piers, W. E.; Chivers, T. Chem. Soc.
Rev. 1997, 26, 345. 12 For preparation of B(C6 F5 )3 , see: (a) Massey, A. G.; Park, A. J.
13
14 15
16 17
18
19
20
21
22 23
24
J. Organomet. Chem. 1964, 2, 245. (b) Massey, A. G.; Park, A. J. J. Organomet. Chem. 1966, 5, 218. (a) Ishihara, K.; Hanaki, N.; Yamamoto, H. Synlett 1993, 577. (b) Ishihara, K.; Funahashi, M.; Hanaki, N.; Miyata, M.; Yamamoto, H. Synlett 1994, 963. (c) Ishihara, K.; Hanaki, N.; Funahashi, M.; Miyata, M.; Yamamoto, H. Bull. Chem. Soc. Jpn. 1995, 68, 1721. Ishihara, K.; Kurihara, H.; Yamamoto, H. Synlett 1997, 597. (a) Mori, Y.; Manabe, K.; Kobayashi, S. Angew. Chem. Int. Ed. 2001, 40, 2816. (b) Mori, Y.; Kobayashi, J.; Manabe, K.; Kobayashi, S. Tetrahedron 2002, 58, 8263. Reetz, M.; Kunish, F.; Heitmann, P. Tetrahedron Lett. 1986, 27, 4721. (a) Kiyooka, S.-I.; Kaneko, Y.; Komura, M.; Matsuo, H.; Nakano, M. J. Org. Chem. 1991, 56, 2276. (b) Kaneko, Y.; Matsuo, T.; Kiyooka, S. Tetrahedron Lett. 1994, 35, 4107. (c) Kiyooka, S.; Kaneko, Y.; Harada, Y.; Matsuo, T. Tetrahedron Lett. 1995, 16, 2821. (d) Kiyooka, S.; Kira, H.; Hena, M. A. Tetrahedron Lett. 1996, 37, 2597. (e) Kiyooka, S.; Hena, M. A. Tetrahedron: Asymmetry 1996, 7, 2181. (f ) Kiyooka, S.; Maeda, H. Tetrahedron: Asymmetry 1997, 8, 3371. (g) Kiyooka, S.; Maeda, H.; Hena, M. A.; Uchida, M.; Kim, C.-S.; Horiike, M. Tetrahedron Lett. 1998, 39, 8287. (a) Goodman, J. M. Tetrahedron Lett. 1992, 33, 7219. (b) Corey, E. J.; Rohde, J. J.; Fischer, A.; Azimioara, M. D. Tetrahedron Lett. 1997, 38, 33. (c) Corey, E. J.; Rohde, J. J. Tetrahedron Lett. 1997, 38, 37. (d) Corey, E. J.; BarnesSeeman, D.; Lee, T. W. Tetrahedron Lett. 1997, 38, 1699. (e) Corey, E. J.; Brans-Seeman, D.; Lee, T. W. Tetrahedron Lett. 1997, 38, 4351. (f ) Corey, E. J.; Lee, T. W. Chem. Commun. 2001, 1321. (a) Furuta, K.; Maruyama, T.; Yamamoto, H. J. Am. Chem. Soc. 1991, 113, 1041. (b) Furuta, K.; Maruyama, T.; Yamamoto, H. Synlett 1991, 439. (c) Ishihara, K.; Maruyama, T.; Mouri, M.; Gao, Q.; Furuta, K.; Yamamoto, H. Bull. Chem. Soc. Jpn. 1993, 66, 3483. (a) Parmee, E. R.; Tempkin, O.; Masamune, S. J. Am. Chem. Soc. 1991, 113, 9365. (b) Parmee, E. R.; Hong, Y.; Tempkin, O.; Masamune, S. Tetrahedron Lett. 1992, 33, 1729. (a) Kiyooka, S.; Kaneko, Y.; Kume, K. Tetrahedron Lett. 1992, 33, 4927. (b) Kiyooka, S.; Yamaguchi, T.; Maeda, H.; Kira, H.; Hena, M. A.; Horiike, M. Tetrahedron Lett. 1997, 38, 3553. Corey, E. J.; Cywin, C. L.; Roper, T. D. Tetrahedron Lett. 1992, 33, 6907. (a) Corey, E. J.; Loh, T.-P. J. Am. Chem. Soc. 1991, 113, 8966. (b) Corey, E. J.; Loh, T.-P.; Roper, T. D.; Azimioara, M. D.; Noe, M. C. J. Am. Chem. Soc. 1992, 114, 8290. (a) Ishihara, K.; Kondo, S.; Yamamoto, H. Synlett 1999, 1283. (b) Ishihara, K.; Kondo, S.; Yamamoto, H. J. Org. Chem. 2000, 65, 9125.
References 25 Reilly, M.; Oh, T. Tetrahedron Lett. 1995, 36, 221. 26 (a) Kinugasa, M.; Harada, T.; Fujita, K.; Oku, A. Synlett
27 28 29 30
31
32 33
34 35 36 37 38 39
40
41 42
43
1996, 43. (b) Kinugasa, M.; Harada, T.; Egusa, T.; Fujita, K.; Oku, A. Bull. Chem. Soc. Jpn. 1996, 69, 3639. (c) Kinugasa, M.; Harada, T.; Oku, A. J. Org. Chem. 1996, 61, 6772. (d) Kinugasa, M.; Harada, T.; Oku, A. J. Am. Chem. Soc. 1997, 119, 9067. (e) Kinugasa, M.; Harada, T.; Oku, A. Tetrahedron Lett. 1998, 39, 4529. (f ) Harada, T.; Egusa, T.; Kinugasa, M.; Oku, A. Tetrahedron Lett. 1998, 39, 5531. (g) Harada, T.; Egusa, T.; Oku, A. Tetrahedron Lett. 1998, 39, 5535. (h) Harada, T.; Nakamura, T.; Kinugasa, M.; Oku, A. Tetrahedron Lett. 1999, 40, 503. Nevalainen, V.; Mansikka, T.; Kostiainen, R.; Simpura, I.; Kokkonen, J. Tetrahedron: Asymmetry 1999, 10, 1. (a) Komura, K.; Nishitani, N.; Itsuno, S. Polym. J. 1999, 31, 1045. (b) Itsuno, S.; Komura, K. Tetrahedron 2002, 58, 8237. Noyori, R.; Murata, S.; Suzuki, M. Tetrahedron 1981, 37, 3899. (a) Dilman, A. D.; Loffe, S. Chem. Rev. 2003, 103, 733. (b) Oishi, M. In Lewis Acids in Organic Synthesis; Yamamoto, H. Ed.; Wiley–VCH: Weinheim, 2000; Volume 1, pp. 355–393. (c) Hosomi, A.; Miura, K. In Lewis Acids Reagents; Yamamoto, H. Ed.; Oxford University Press: Oxford, 1999; pp. 159–168. Maerker, C.; Kapp, J.; Schleyer, P. v. R. In Organosilicon Chemistry II; Auner, N., Weis, J.; VCH: Weinheim, 1996; pp. 329–359. Shin, S. K.; Beauchamp, J. L. J. Am. Chem. Soc. 1989, 111, 990. (a) Schwarz, H. In The Chemistry of Organic Silicon Compounds; Patai, S., Rappoport, Z., Eds.; Wiley: Chichester, 1989; Part 1, pp 445–510. (b) Chojnowski, J.; Stanczyk, W. A. Adv. Organomet. Chem. 1990, 30, 243. Lambert, J. B.; Zhao, Y.; Zhang, S. M. J. Phys. Org. Chem. 2001, 14, 370. Lambert, J. B.; Zhao, Y. Angew. Chem. Int. Ed. Engl. 1997, 36, 400. Lambert, J. B.; Lin, L. J. Org. Chem. 2001, 66, 8537. ¨ller, T.; Zhao, Y.; Lambert, J. B. Organometallics 1998, 17, Mu 278. Hergott, H. H.; Simchen, G. Liebigs Ann. Chem. 1980, 1718. (a) Bassindale, A. R.; Stout, T. J. Chem. Soc., Perkin Trans. 2 1986, 221. (b) Bassindale, A. R.; Lau, J. C.-Y.; Stout, T.; Tayor, P. G. J. Chem. Soc. Perkin Trans. 2 1986, 227. Mayr, H.; Gorath, G. J. Am. Chem. Soc. 1995, 117, 7862. (b) Kira, M.; Hino, T.; Sakurai, H. Chem. Lett. 1992, 555. (c) Prakash, G. K. S.; Wang, Q.; Rasul, G.; Olah, G. A. J. Organomet. Chem. 1998, 550, 119. (d) Prakash, G. K. S.; Bae, C.; Rasul, G.; Olah, G. A. J. Org. Chem. 2002, 67, 1297. Murata, S.; Suzuki, M.; Noyori, R. Tetrahedron 1988, 44, 4259. (a) Murata, S.; Suzuki, M.; Noyori, R. J. Am. Chem. Soc. 1980, 102, 3248. (b) Murata, S.; Suzuki, M.; Noyori, R. Tetrahedron Lett. 1980, 21, 2527. Mukai, C.; Hashizume, S.; Nagami, K.; Hanaoka, M. Chem. Pharm. Bull. 1990, 38, 1509.
67
68
2 Boron and Silicon Lewis Acids for Mukaiyama Aldol Reactions 44 Kawai, M.; Onaka, M.; Izumi, Y. Bull. Chem. Soc. Jpn 1988,
61, 1237. 45 (a) Ishihara, K.; Hiraiwa, Y.; Yamamoto, H. Synlett 2001,
46 47
48 49
50 51 52
53
54
1851. (b) Ishihara, K.; Hiraiwa, Y.; Yamamoto, H. Chem. Commun. 2002, 1564. Hollis, T. K.; Bosnich, B. J. Am. Chem. Soc. 1995, 117, 4570. (a) Ooi, T.; Tayama, E.; Takahashi, M.; Maruoka, K. Tetrahedron Lett. 1997, 38, 7403. (b) Chen, J.; Sakamoto, K.; Orita, A.; Otera, J. J. Org. Chem. 1998, 63, 9739. (c) Otera, J.; Chen, J. Synlett 1996, 321. Molander, G. A.; Cameron, K. O. J. Org. Chem. 1991, 56, 2617. (a) Olah, G. A.; Field, L. D. Organometallics 1982, 1, 1485. (b) Olah, G. A.; Heiliger, L.; Li, X.-Y.; Prakash, G. K. S. J. Am. Chem. Soc. 1990, 112, 5991. Iwasawa, N.; Mukaiyama, T. Chem. Lett. 1987, 463. Mukaiyama, T.; Ohno, T.; Han, J. S.; Kobayashi, S. Chem. Lett. 1991, 949. (a) Davis, A. P.; Jaspars, M. Angew. Chem. Int. Ed. Engl. 1992, 31, 470. (b) Davis, A. P.; Plinkett, S. J. J. Chem. Soc., Chem. Commun. 1995, 2173. (c) Davis, A. P.; Muir, J. E.; Plunkett, S. J. Tetrahedron Lett. 1996, 37, 9401. (a) Oishi, M.; Aratake, S.; Yamamoto, H. J. Am. Chem. Soc. 1998, 120, 8271. (b) Oishi, M.; Yamamoto, H. Macromolecules 2001, 34, 3512. (a) Carreira, E. M.; Singer, R. A. Tetrahedron Lett. 1994, 35, 4323. (b) Denmark, S. E.; Chen, C.-T. Tetrahedron Lett. 1994, 35, 4327. (c) For detailed mechanistic discussion of catalytic asymmetric Mukaiyama aldol reaction, see: Carreira, E. M. In Comprehensive Asymmetric Catalysis, Jacobsen, E. N., Pfaltz, A.; Yamamoto, H., Eds.; Springer: Heidelberg, 1999; Vol. 3, pp 997–1065.
69
3
Copper Lewis Acids Jeffrey S. Johnson and David A. Nicewicz 3.1
Introduction
Copper complexes serve as structurally diverse Lewis acids that promote additions of enolates and latent enolates to carbonyl compounds. The exact mode of activation depends on the complex: many copper(II) complexes are known to effectively activate the electrophilic component in aldol additions whereas copper(I) complexes are implicated in aldol reactions that feature nucleophile activation (Scheme 3.1). Irrespective of the mechanistic details, when the metal complex carries stereochemical information in its ligand framework, chirality transfer to the nascent carbinol stereogenic center can be nearly complete. This review will survey nucleophilic addition of enolates and latent enolates to carbonyl compounds catalyzed by copper Lewis acids. Particular attention will be paid to stereoselective variants and the development of stereochemical models to account for observed enantiomeric enrichment. Applications to natural product synthesis will be highlighted. A distinction is drawn between carbonyl activation in a Mukaiyama aldol sense and nucleophile activation via a metalloenolate; because each of these reaction-types do involve Lewis acid–Lewis base interactions, however, both reaction families will be included in this chapter. Coverage will focus on catalytic examples.
3.2
Early Examples
The ability of Cu(II) ion to promote the addition of acetone to aromatic aldehydes in crossed-aldol condensation reactions was demonstrated by Iwata and Emoto in 1974 [1]. Subsequent extension to a regioselective crossed aldol reaction with 2-butanone was later described by Irie and Watanabe [2]. Both of these early examples employ more than one equivalent of Cu(II) source relative to the aldehyde. As a forerunner to his pioneering Au(I) work, Ito reported in 1985 that Modern Aldol Reactions. Vol. 2: Metal Catalysis. Edited by Rainer Mahrwald Copyright 8 2004 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim ISBN: 3-527-30714-1
70
3 Copper Lewis Acids
O
[Cu]
X
or
X
2
OSiR3 1 R 2
3
R R electrophile activation
O R
OSiR3 1 R
[Cu]
O R2 OH
3
R
3
R
X 1
O 1
R
X
O
[Cu]
R
[Cu] 1
R
X
O
nucleophile activation
2
3
R
R
[Cu] = Cu(I) or Cu(II) complex Scheme 3.1
Modes of activation for Cu-catalyzed aldol reactions.
catalytic quantities of a Cu(I) catalyst could be employed to promote addition of ethyl isocyanoacetate (1) to a,b-unsaturated aldehydes (Eq. (1)) [3]. The reactions are selective for formation of the trans-4,5-disubstituted oxazoline adducts (3). A footnote of that paper indicates that enantioselective variants of this reaction are possible employing ()-ephedrine as a scalemic additive. CO2Et
CO2Et C
5 mol % CuCl/Et 3N
O
R
N
N
H 1
R
CO2Et N O 3a 60% trans:cis 4:1
THF, r.t.
O 3
2 CO2Et Me
CO2Et Ph
N O 3b 75%
N
Me
O 3c ca. 100% trans:cis 2:1
CO2Et N
(1)
CH(Et)2
O 3d 75% trans only
3.3
Mukaiyama Aldol Reactions with Cu(II) Complexes 3.3.1
Enolsilane Additions to (Benzyloxy)acetaldehyde Scope and Application In 1996 Evans and coworkers reported highly enantioselective additions of latent enolates to (benzyloxy)acetaldehyde (7) catalyzed by enantiomerically pure pyridyl bis(oxazoline) Cu(II) complexes (4, hereafter (pybox)CuL n ) [4, 3.3.1.1
3.3 Mukaiyama Aldol Reactions with Cu(II) Complexes
5]. The reaction is a Mukaiyama aldol addition in which the aldehyde is activated toward nucleophilic addition by the electropositive Cu(II) center. The adduct is a b-silyloxy ester derivative that is readily desilylated under acidic conditions for the purpose of analyzing the enantiomeric enrichment of the product (Eq. (2)). Simultaneous investigations revealed that a bidentate C2 symmetric bis(oxazoline) ligand is also an effective chiral control element, albeit with slightly reduced levels of enantiocontrol (Eq. (3)). The pendant phenyl substituent is optimal for the pybox ligand, and the tert-butyl group is most effective among those surveyed for the bis(oxazoline) scaffold.
(2)
ð3Þ Catalyst preparation depends on the identity of the counter-anion, which has a marked effect both on rate and selectivity. Bis(oxazoline)Cu(OTf )2 (5, hereafter (box)Cu(OTf )2 ) and (pybox)Cu(OTf )2 complexes are prepared simply by mixing equimolar quantities of the ligand and Cu(OTf )2 in CH2 Cl2 . The corresponding (ligand)Cu(SbF6 )2 complexes are synthesized via anion metathesis of the (ligand)CuCl2 complexes with two equivalents of AgSbF6 . Filtration of the resulting AgCl salt gives a clear blue or green solution of the active catalyst complex. (Ph-pybox)Cu(SbF6 )2 -catalyzed additions to (benzyloxy)acetaldehyde are highly enantioselective for several acetate-type nucleophiles derived from thio- and oxo-esters (Figure 3.1). Less flexibility is possible with the electrophile. p-Methoxybenzyloxyacetaldehyde is an excellent substrate for the addition, but butoxyacetaldehyde is somewhat less selective. Enantiocontrol is significantly less for aldehydes nominally incapable of chelation. The Chan diene (13) and dioxolanone-derived nucleophile (14) both serve as effective acetoacetate nucleophile equivalents in asymmetric catalyzed additions to benzyloxyacetaldehyde (Scheme 3.2). The former example was optimized to employ only 2 mol% chiral catalyst to deliver multigram
71
72
O
OH
X
3 Copper Lewis Acids
8 X = SCMe3 99% ee 98% ee 10 X = SEt OBn 98% ee 11 X = OEt
O
OH
Me3CS
99% ee R = OBn 88% ee R = OBu R = OPMB 99% ee R = OTBS 56% ee R = CH2Ph <10% ee
12a 12b R 12c 12d 12e
Fig. 3.1
Enantioenriched aldol adducts derived from (Ph-pybox)Cu(SbF6 )2 -catalyzed reactions (Eq. (2)).
quantities of essentially optically pure material (15). On these scales the reaction must be initiated at a low temperature, because the reaction is highly exothermic. The d-hydroxy-b-keto ester product has been diastereoselectively reduced to afford either the syn (16) or anti (17) diol product in good yield. The Chan diene addition product provides a useful entry into polyacetate building blocks. To this end, the enantiomeric (R,R-Ph-pybox)Cu(SbF6 )2 TMSO
O
OTMS
OBn
H
Me3CO 13
7 2+
O
N N Cu N 4 Ph 2 mol %
O
O
2 SbF6
OH OH OBn
Me3CO 16
Ph
O
O
OH
OBn 15 10 g, 85%, 99% ee
CH2Cl2, -93 →-78 °C; then PPTS, MeOH
Me3CO
O
OH OH OBn
Me3CO 17 2+ O Me O
N
Me O
OBn
H
MeO
Ph
O
14
7
N Cu N 4 5 mol %
O
Enantioselective aldol reactions of acetoacetate nucleophile equivalents catalyzed by (Ph-pybox)Cu(SbF6 )2 complexes.
Me
Me
O
O
Ph
CH2Cl2, -78 °C; then aq. HCl/THF
Scheme 3.2
2 SbF6
O
OH OBn
18 94%, 92% ee
3.3 Mukaiyama Aldol Reactions with Cu(II) Complexes
73
complex has been used to deliver the needed aldol enantiomer (ent-15) for ultimate transformation to the cytostatic natural product phorboxazole B [6], and the bryostatin family of antitumor agents (Scheme 3.3) [7]. It is noteworthy that in the former reaction a common asymmetric aldol product provides a common starting material for two different pyran rings. A stereoselective catalyzed vinylogous aldol addition was developed for application to the asymmetric synthesis of callepeltoside A (Scheme 3.4) [8]. The reaction makes use of an air-stable hydrated catalyst, [((R,R)-Phpybox)Cu(OH2 )2 ](SbF6 )2 (22), to effect the formation of the d-hydroxy-a,bunsaturated ester 21 with complete E selectivity and excellent enantiocontrol. Substituted (propionate-type) silylketene acetals also add to (benzyloxy)acetaldehyde with high diastereo- and enantiocontrol under the influence of (pybox)Cu(SbF6 )2 catalysis (Figure 3.2). A range of cyclic and acyclic nucleophiles participate in diastereo- and enantioselective aldol reactions to give the syn aldol diastereomer in all cases but one (23a–23e). The syn selectivity predominates irrespective of the geometry of the starting silylketene acetal. The only exception to this trend is 2-trimethylsilyloxyfuran, which affords the anti diastereomer 23f in good chemical and optical yield. Kunieda and coworkers reported a modified catalyst system in 1999 that probes the effect of the backbone spacer connecting the two oxazoline rings and steric congestion about the metal center [9]. Anthracene-based bis(oxazoline)Cu(II) complexes were prepared and tested in the addition of t-butyl thioester silylketene acetal to (benzyloxy)acetaldehyde (Eq. (4)). The methylene-bridged complex 24Cu(OTf )2 strongly favors formation of the R enantiomer, whereas extending the linking chain by one CH2 group (25Cu(OTf )2 ) results in a selectivity turnover to favor the S enantiomer. The authors propose that a change in aldehyde binding geometry could result from the structural perturbation. In neither reaction is selectivity superior to that of the Evans system.
ligand (10 mol %) O
OTMS
OBn
H
Me3CS
OH
O
Cu(OTf)2 (10 mol %) CH2Cl2, -78 °C
O OBn
Me3CS
R
O
O N
R
N
N
R
R 24a, R = H 24b, R = Me
ligand 24a 24b 25a 25b R
N
R
R
8R
O
O
25a, R = H 25b, R = Me
OBn
Me3CS
8S
R
OH
8S:8R 1:24 1:3.3 9:1 3.2:1
ð4Þ
H
O
Me
OBn
2 mol %
N Ph
O
Br
H O HO
*
OMe
O
N Me
H O
Me
O
O OH
O
Me O
O N
*
H O H H O
CH2
H
OH
* ent-15 OBn 85%, >99% ee
Me3CO
2 SbF6
phorboxazole B
CH2Cl2, -93 to -78 °C
Ph
N
N Cu
Application of enantioselective (Ph-pybox) Cu(SbF6 )2 -catalyzed aldol reactions to pyran-containing natural products.
HO
OTMS
MeO Scheme 3.3
Me3CO
TMSO
O
2+
Pr
MeO2C
OH
O
CO2Me
O OH H OH O O Me O Me OH
O
bryostatin 2
Me
* O
Me Me HO
74
3 Copper Lewis Acids
3.3 Mukaiyama Aldol Reactions with Cu(II) Complexes
2+ O
Me
TMSO
Ph
O
EtO
2 SbF 6
Ph
2.5 mol %
H OPMB 19
N N Cu N H2O OH2 22
O
CH2Cl2, -78 ° C; aq. HCl
20 O Me O MeO O
O
Me
EtO
OH
Me
*
Me OPMB
H MeO
21 93%, 95% ee
Me
O
H
O
NH Me
OH O O * Cl
callepeltoside A Scheme 3.4
Application of enantioselective (Ph-pybox) Cu(SbF6 )2 -catalyzed vinylogous aldol reactions to callepeltoside A.
Mechanism and Stereochemistry The proposed mechanism for the (pybox)Cu(SbF6 )2 catalyzed addition reaction involves activation of the chelating electrophile by the metal center (26), nucleophilic addition (26 ! 27), silylation of the metal aldolate (27 ! 28), and release of the neutral product (28 ! 29 þ 4) (Scheme 3.5). The silicon-transfer step of this mechanism has a significant intermolecular component, as evidenced by double-labeling experiments (Scheme 3.6). The identity of the species responsible for intermolecular silyl transfer is not known, although the metal aldolate and Me3 SiSbF6 are potential candidates. What is apparent from the enantiomeric enrichment of the aldols in the crossover experiment is that no stereochemical ‘‘leakage’’ occurs in this process: any potential achiral aldol catalyst [10] is not competitive with the chiral cationic Cu(II) complex. The asymmetric aldol reaction catalyzed by (Ph-pybox)Cu(SbF6 )2 has a significant positive non-linear effect when complexes are prepared from enantioimpure pybox ligands. Experimental evidence points to a catalytically inactive heterochiral dimer as the source of this non-linear effect (reservoir 3.3.1.2
75
76
3 Copper Lewis Acids
O
OH
O OBn
EtS
OH
EtS
Me
Me 23c
85% yield, 95% ee syn:anti 95:5 O
OH OBn
EtO
OBn
23b Me
90% yield, 97% ee syn:anti 97:3
H
OH
Me3CS
Me
23a
O
O OBn
86% yield, 99% ee syn:anti 85:15
OH
H
OBn
O
Me
OH OBn
O
23d
O
23e
60% yield, 87% ee syn:anti 84:16
23f
93% yield, 92% ee syn:anti 9:91
95% yield, 95% ee syn:anti 95:5
Fig. 3.2
Aldol adducts derived from enantio- and diastereoselective (Ph-pybox)Cu(SbF6 )2 catalyzed aldol reactions by use of substituted silylketene acetals.
N O Me3CS
OTMS O
O
2+ 2 SbF6
Bn
7
4
Bn
O
H
N Cu N
29 2+ N 2 SbF N 6 O Cu N O Bn H
2+ N 2 SbF 6
O Me3CS
N OTMS Cu N O Bn 28
26 OTMS 2+ N 2 SbF 6
TMSO Me3CS
N O Cu N O Bn 27
Scheme 3.5
Proposed mechanism for (Ph-pybox) Cu(SbF6 )2 -catalyzed enantioselective aldol reactions.
Me3CS 6
3.3 Mukaiyama Aldol Reactions with Cu(II) Complexes O OSiMe3
OX
O OBn
H
O
EtS
EtS
30 0.5 equiv
O OBn
Scheme 3.6
Crossover experiments to verify intermolecular silicon transfer in enantioselective (Ph-pybox)Cu(SbF6 )2 catalyzed aldol reactions.
effect) [11]. Corroboration was obtained via crystallization of the heterochiral dimer 34, demonstrating that its formation is indeed feasible (Figure 3.3). Semiempirical calculations support the notion that the homochiral dimer is less stable than the heterochiral dimer, accounting for the positive non-linear effect. Substantial insight into the mechanism of asymmetric induction has been obtained via crystallization of monomeric [(pybox)CuL n ](SbF6 )2 complexes. An X-ray structure of [(i-Pr-pybox)Cu(OH2 )2 ](SbF6 )2 (35) reveals square pyramidal geometry with one water molecule occupying the coordination site in the ligand plane and the second water molecule occupying the axial position (Figure 3.4). Neither counter-ion is within the coordination sphere of the metal. It is revealing that the CuaO bond length in the ligand plane is considerably shorter than the CaOaxial bond length (1.985(7) compared with 2.179(7) A˚). For maximum electrophile activation, aldehyde coordination should occur in the ligand plane. The presence of the axial binding site provides a second ‘‘contact point’’ for the chelating carbonyl compound and introduces an additional element of substrate organization.
2+
H
O
O
N N N Cu N H N Ph N Ph H O
O Ph
OBn 8 99% ee
OX
32 X = SiMe3; 23% 33 X = SiMe2Et; 34%
Ph
2 SbF6
H
34 Fig. 3.3
Structure of heterochiral dimer [((R,R)-Ph-pybox)Cu((S,S)-Ph-pybox)](SbF6 )2 (34).
OH
Me3CS
29 X = SiMe3; 30% 31 X = SiMe2Et; 13%
7 1.0 equiv
OSiMe2Et
O OBn
Me3CS
Me3CS 6 0.5 equiv
77
OH OBn
EtS 10 99% ee
78
3 Copper Lewis Acids
2+ O N
N Cu
Me2HC H2O OH2
O
2 SbF6
N CHMe2
35 Fig. 3.4
Structure of [(i-Pr-pybox)Cu(OH2 )2 ](SbF6 )2 (35).
Ultimate corroboration of this mode of activation was obtained via crystallization of the catalyst–substrate complex [(Ph-pybox)Cu(BnOCH2 CHO)](SbF6 )2 (36). The aldehyde coordinates to form a five-membered ring chelate, with the ether oxygen occupying the axial position (Figure 3.5). The aromatic ring of the benzyloxy group is ca. 3.5 A˚ removed from the aromatic pyridyl ring in an offset face–face arrangement, a p–p interaction that might explain the superior selectivities observed for p-PMBOCH2 CHO and BnOCH2 CHO compared with n-BuOCH2 CHO. Thus coordinated, the aldehyde re face is shielded by the proximal phenyl ring of the pybox ligand; addition to the si face is predicted and experimentally observed. This model predicts that (S)- and (R)-a-benzyloxypropionaldehyde will behave as matched and mismatched substrates in the addition. In accord with this proposed transition state assembly, the (S) isomer (R1 ¼ Me, R2 ¼ H) undergoes a highly efficient and diastereoselective addition (2 h, dr ¼ 98.5:1.5) whereas the (R) isomer (R1 ¼ H, R2 ¼ Me) is a sluggish reaction partner and poorly diastereoselective (12 h, dr ¼ 50:50).
O N O
N Ph
Cu O
O
H Bn R2
H
N
R1
H
Ph
X OSiR 3
Fig. 3.5
X-ray structure of [(Ph-pybox)Cu (BnOCH2 CHO)](SbF6 )2 (36) and stereochemical model for enantioselective additions.
3.3 Representative Experimental Procedures
O N O
N Ph
O H
N Cu
O
Ph
Me O H H Bn O H R' R
O
N N Ph
H
R'
R,R' = OTMS, SR
O OBn
EtS
Cu
H Bn O
OH
Me
H
N
Ph O Me H R
OH OBn
EtS Me
Fig. 3.6
Stereochemical models for syn-selective aldol reactions catalyzed by (Ph-pybox) Cu(SbF6 )2 .
The syn diastereoselectivity is accounted for by an open antiperiplanar transition structure that minimizes gauche, dipole, and other through-space effects (Figure 3.6). Representative Experimental Procedures Preparation of (S,S)-Ph-pybox)Cu(SbF6 )2 (4). In a nitrogen atmosphere box (S,S)-bis(phenyloxazolinyl)pyridine (18.5 mg, 0.05 mmol) and CuCl2 (6.7 mg, 0.05 mmol) were placed in an oven-dried round-bottomed flask containing a magnetic stirring bar. In a nitrogen atmosphere box AgSbF6 (34.4 mg, 0.10 mmol) was placed in an oven-dried round-bottomed flask containing a magnetic stirring bar. The flasks were fitted with serum caps and removed from the nitrogen atmosphere box. The flask containing the ligand–CuCl2 mixture was charged with CH2 Cl2 (1.0 mL). The resulting suspension was stirred rapidly for 1 h to give a fluorescent green suspension. AgSbF6 (in 0.5 mL CH2 Cl2 ) was added via a cannula with vigorous stirring, followed by a 0.5 mL rinse. The resulting mixture was stirred rapidly for 3 h in the absence of light and filtered through an oven-dried glass pipet tightly packed with cotton to remove the white AgCl precipitate, yielding active catalyst as a clear blue solution. Catalyzed Addition of Silylketene Acetals to Benzyloxyacetaldehyde Using (S,S)Ph-pybox)Cu(SbF6 )2 . Benzyloxyacetaldehyde (70.0 mL, 0.50 mmol), followed by a silylketene acetal (0.60 mmol), were added to a 78 C solution of 4 in CH2 Cl2 . The resulting solution was stirred at either 78 or 50 C until the aldehyde was completely consumed (15 min to 48 h) as determined by TLC (30% EtOAc–hexanes). The reaction mixture was then filtered through a 1.5
79
3 Copper Lewis Acids
80
cm 8 cm plug of silica gel with Et2 O (50 mL). Concentration of the ether solution gave a clear oil, which was dissolved in THF (10 mL) and 1 m HCl (2 mL). After standing at room temperature for 15 min, this solution was poured into a separatory funnel and diluted with Et2 O (10 mL) and H2 O (10 mL). After mixing, the aqueous layer was discarded, and the ether layer was washed with saturated aqueous NaHCO3 (10 mL) and brine (10 mL). The resulting ether layer was dried over anhydrous MgSO4 , filtered, and concentrated to provide the hydroxy esters. 3.3.2
Enolsilane Additions to a-Keto Esters Scope and Application Dialkylketones are typically poor electrophiles in traditional aldol bond constructions, but the presence of a strong electron-withdrawing group in aketo esters engenders reactivity that more closely resembles that of aldehydes. Evans and coworkers described the first catalytic, enantioselective enolsilane addition to pyruvate esters [12, 13]. The most effective catalyst with regard to yield and enantiocontrol is the (t-Bu-box)Cu(OTf )2 complex 5 (Eq. (5)) and its corresponding hydrated derivative 5 (H2 O)2 (Eq. (6)). The latter is an air-stable solid with identical reactivity when used in the presence of a desiccant. In contrast to the pybox system the cationic complex [(t-Bu-box)Cu](SbF6 )2 results in reduced enantioselectivity [14]. 3.3.2.1
Me
Me
N
N
O
O
OTMS Me3CS
Cu Me3C TfO OTf CMe3
O CO2Me
Me 6
5
O HO Me Me3CS
-78 °C; then aq. HCl
37
CO2Me
38 THF: 95%, 99% ee CH2Cl2: 94%, 99% ee
ð5Þ Me
O N
OTMS Me3CS
37
CO2Me
2 OTf
N
Cu Me3CH O OH CMe3 2 2 5·(H2O)2
O Me
6
2+
Me
O
MS 3Å -78 ° C; then aq. HCl
O HO Me Me3CS
CO2Me 38
THF: 97% ee CH2Cl2: 99% ee
ð6Þ
3.3 Representative Experimental Procedures
81
The addition reactions can be effectively performed in a range of solvents, including THF, Et2 O, CH2 Cl2 , PhMe, hexane, and PhCF3 . The enantiomeric excess is >94% for addition of the tert-butyl thioacetate silylketene acetal to methyl pyruvate in all of these solvents. Catalyst loadings down to 1 mol% are feasible. The temperature–enantioselectivity profile has been studied and shown to be relatively flat (99% ee at 78 C; 92% ee at þ20 C). Interestingly, the catalytic reaction in THF, a relatively good donor solvent, is significantly faster than the identical reaction in CH2 Cl2 . Control experiments with stoichiometric quantities of (t-Bu-box)Cu(OTf )2 demonstrate that the actual addition step is faster in CH2 Cl2 , a fact consistent with the predicted deactivation of the Lewis acidic center in THF via solvent coordination. Accordingly, THF must play a role in promoting catalyst turnover. One postulated role of THF in the catalytic cycle is to act as a silicon shuttle, forming a more reactive silylating species (e.g. [THF-SiMe3 ]OTf ). The ‘‘silicon shuttle’’ hypothesis predicts significant intermolecular crossover, which is experimentally borne out by double-labeling experiments in analogy to those described above for benzyloxyacetaldehyde additions. Silylation of the putative metal aldolate by an exogenous Si(þ) source results in significant rate accelerations. For example, a catalyzed pyruvate addition that requires 14 h in the absence of an additive is complete in 0.5 h in the presence of 1.0 equiv. TMSOTf (Eq. (7)). The presence of stoichiometric quantities of this Lewis acid does not erode the selectivity of the reaction. The Cu(II) complex again reacts to complete exclusion of the achiral complex. Me
Me
N
N
O
O
OTMS Me3CS
O Me
6
CO2Me 37
Cu Me3C TfO OTf CMe3 5 2 mol % n equiv TMSOTf CH2Cl2, -78 °C; then aq. HCl;
O HO Me Me3CS
CO2Me 38 n = 0; reaction time = 14 h; 97% ee n = 1; reaction time = 0.5 h; 97% ee
ð7Þ The scope of the reaction with regard to the carboalkoxy and acyl moieties (electrophile) includes a range of substituents (Figure 3.7). a-Branched substrates (e.g. i-PrC(O)CO2 Me) result in low p-facial selectivity (39e) but comprise the only subset of poorly selective a-keto esters. Enolsilanes derived from acetone and acetophenone are effective and selective nucleophiles in additions to methyl pyruvate (39g–h). Propionate silylketene acetals are also usually effective (39i). As in the [(pybox)Cu](SbF6)2 -catalyzed additions to benzyloxyacetaldehyde, good syn diastereoselectivity is observed. The only
3 Copper Lewis Acids
82
O HO Me Me3CS
39a
CO2Bn
95%, 99% ee O HO
Me3CS
39b
CO2CMe3
Me3CS
i
O HO Me
Pr
CO2Me 39e 36%, 36% ee
CO2Me 39f 97%, 97% ee
Ph
CO2Me 39g 77%, 99% ee
O HO Me
CO2Me
O HO Me
CO2Me
EtS
i
Bu 39j 88%, 93% ee syn:anti 90:10
Pr 39k 80%, 99% ee syn:anti 90:10
Et
39d
Bu CO2Me
94%, 94% ee O HO Me Me
CO2Me 39h 81%, 94% ee HO Me
CO2Me O 39l O 99%, 99% ee syn:anti 5:95
Et
Me
Me O 39m 85% yield syn:anti 93:7 97% ee
Me3CS
i
O
O HO Me EtS
CO2Me
EtS
i
Me 39i 88%, 99% ee syn:anti 97:3
O HO
O HO Me
EtS
O HO Me
39c
CO2Me
84%, 94% ee
91%, 99% ee
Me3CS
Me3CS
O HO Et
O HO Me
O
regioselectivity 98:2
Fig. 3.7
Aldol products derived from enantioselective additions catalyzed by (t-Bu-box) Cu(OTf )2 (5).
exception to this trend is again 2-trimethylsilyloxyfuran, for which anti diastereoselectivity is high (39l). 2,3-Pentanedione also participates in selective aldol reactions with silylketene acetals. In addition to diastereo- and enantioselectivity issues faced in other examples this electrophile contains a subtle regiochemical issue between two nominally similar carbonyl groups. In practice, the (t-Bu-box)Cu(OTf )2 complex performs the subtle discrimination between the two groups and effects a highly regio- and stereoselective aldol reaction with the acetyl group to give 39m. Verdine has described the application of this aldol methodology to the enantio- and diastereocontrolled synthesis of a-hydroxy-a-methyl-b-amino acids (40) in a sequence that uses the carbothioalkoxy group as an amine surrogate via a Curtius rearrangement (Scheme 3.7) [15]. Thus, the desired protected b-amino acid can be obtained in four steps with the needed stereochemical relationships established in the (t-Bu-box)Cu(OTf )2 -catalyzed aldol addition. The asymmetric pyruvate addition can be effected with a complex derived
3.3 Representative Experimental Procedures
Me
83
Me O
O N
O
OTMS
OEt
Me
EtS
O
Me
N Cu Me3C TfO OTf CMe3 5 THF, -78 °C 48 h, 85%
O Me OH EtS
CO2Et Me Me
Me
dr = 10-15:1; >91% ee Me OH
4 steps BocHN
CO2H Me Me 40
Scheme 3.7
Synthesis of a-hydroxy-a-alkyl-b-amino acids from enantioselective pyruvate aldol reactions catalyzed by (t-Bu-box)Cu(OTf )2 (5).
from Cu(OTf )2 and a polystyrene-bound bis(oxazoline) ligand (41) with selectivity approaching that of the solution reaction (Eq. (8)) [16]. As with many solid-supported complexes, catalytic activity was significantly less than the soluble variant. Nonetheless, Salvadori and co-workers demonstrated that the ligand could be reused in multiple reaction cycles with no loss of activity provided that additional Cu(OTf )2 was added to the reaction mixture. In the absence of additional Cu(OTf )2 , recycling is still possible, with
O
Me O
O N Me3C O
OTMS
OMe
Me
Me3CS 6
O 37
N
ð8Þ
41 CMe3 12 mol %
O Me OR
Cu(OTf)2 (7 mol %) THF, 0 °C MS 3Å
Me3CS
CO2Me
38 R = H, TMS
7 cycles; reaction time = 1-4 h, ee = 88-93%
84
3 Copper Lewis Acids
the consequence of extended reaction times in subsequent cycles. It is interesting to note that the relative amounts of the silylated and unsilylated aldol products vary from run to run, but the enantioselectivity is relatively constant. A post-catalytic cycle desilylation seems most reasonable. Jørgenson and co-workers have extended the a-keto ester additions to keto malonate substrates (Eq. (9)) [17]. In these asymmetric additions, the tertiary carbinol is not a stereogenic center; in essence the chiral complex induces asymmetry on the nucleophile. For a range of enolsilane nucleophiles, enantiocontrol in the addition step is moderate to excellent. The optimal promoter for these additions is the (Ph-box)Cu(OTf )2 complex (42). In all instances but one the (E)-enolsilane was employed; the (Z)-enolsilane derived from propiophenone gave excellent results (43e). Me
Me O
O N
O
OTMS EtO2C
R
N Cu Ph TfO OTf Ph 42 10 mol % CO2Et
O
O
43a 82% 58% ee O Ph
OH CO2Et CO2Et
OH CO2Et CO2Et Me 43e 95% 90% ee
R'
OH CO2Et CO2Et
OH CO2Et CO2Et
O
OH CO2Et CO2Et
43b 91% 86% ee O
R
Et2O
R'
OH CO2Et CO2Et
O
43c 88% 93% ee O
O
OH CO2Et CO2Et
43d 90% 85% ee
OH CO2Et CO2Et
ð9Þ 43f 80% 60% ee
43g 26% 36% ee
Dalko and Cossy have employed the Danishefsky diene in additions to ethyl pyruvate catalyzed by an uncharacterized complex prepared by mixing enantiopure stilbene diamine 44 and cyclobutanone 45 (1:1), followed by complexation with Cu(OTf )2 (Eq. (10)) [18]. Cyclobutanone was optimal with regard to yield and enantioselectivity for the ketones and aldehydes surveyed. Reactant stoichiometry and premixing time were found to have a significant effect on enantioselectivity and reaction efficiency. The reaction affords a mixture of both the silylated and desilylated acyclic aldol product
3.3 Representative Experimental Procedures
(48), in addition to the cyclized dihydropyrone (47). Whether the dihydropyrone is formed by a concerted or stepwise mechanism is yet to be determined. In practice, the acyclic aldols are easily cyclized to the dihydropyrone in the presence of trifluoroacetic acid for the purpose of determining the enantiomeric excess. This catalyst system is noteworthy for the simplicity with which the active catalyst is assembled (in situ). OMe
O OEt
Me TMSO
O 46
Ph Ph 44
37
NH2
O
NH2 (1:1)
45
OMe O
Cu(OTf)2 (10 mol %), MS 4Å THF, -72 °C
O
(10)
OH(TMS)
CO2Et Me
47 85%, >98% ee
O
CO2Et Me 48
F3CCO2H
Mechanism and Stereochemistry The mechanism of Cu(II)-catalyzed additions to a-keto esters is thought to proceed via a Mukaiyama aldol pathway, with the difunctional electrophile undergoing bidentate activation by the Cu(II) Lewis acid (49). This coordination event lowers the LUMO of the ketone to a point that facilitates addition of the silylketene acetal (49 ! 50). Silylation of the Cu(II) aldolate via an intra- or intermolecular silicon transfer gives the neutral metalcoordinated adduct (52) that decomplexes to regenerate the catalytically active Lewis acid and release the product, 53 (Scheme 3.8) [13]. A distorted square-planar metal center is implicated in all reactions involving (t-Bu-box)CuL n [19]. This is suggested both by X-ray crystallographic studies of the hydrated complex [(t-Bu-box)Cu(OH2 )2 ](SbF6 )2 and by PM3 calculations designed to probe the structure of activated intermediates. The X-ray structure reveals that the coordinated water molecules are tilted out of the ligand plane by approximately 30 (Figure 3.8). This is a steric effect, as water molecules in the corresponding [(i-Pr-box)Cu(OH2 )](SbF6 )2 complex are nearly coplanar with the ligand (approximately 7 out of plane). By inspection, replacing the water molecules with the oxygen atoms of the pyruvate ester should result in a complex in which the enantiotopic faces of the carbonyl are significantly differentiated. This has been con3.3.2.2
85
86
3 Copper Lewis Acids O
Me3CS
O R OTMS O
N
N Cu TfO OTf 5
OMe
53
O R OTMS N O Cu N Me3CS L 52 OMe
L TMS
Me3CS
N
N O R O Cu O 51
OMe 37
R
N O Cu O
49 OMe
N TMS
-L
2+ 2 OTf
N
2+ 2 OTf
2+ 2 OTf
O
R
N O R O Cu O
2+ 2 OTf
OTMS Me3CS 6
Me3CS +L 50 OMe OMe Scheme 3.8 Proposed mechanism for (t-Bu-box)Cu(OTf )2 -catalyzed enantioselective aldol reactions.
firmed by PM3 calculations. The pyruvate ester additions are all consistent with the stereochemical model shown in Figure 3.9. The bulky t-butyl group effectively shields the re face of the ketone, directing nucleophilic addition to the si face. This complexation mode is now well established with this family of catalysts. The diastereoselectivity in additions of substituted enolsilanes to a-keto esters can be rationalized by an open, antiperiplanar transition structure that minimizes steric interactions between the enolsilane substituent and
Me
2+
Me O
O N
N
2 SbF6
Cu Me3CH O OH CMe3 2 2
Fig. 3.8
X-ray crystal structure of [(t-Bu-box)Cu(H2 O)2 ](SbF6 )2 .
3.3 General Experimental Procedure
Me O
O CMe3 N N Cu O O
Me
H CMe3 OMe
H
R
OTMS SR Fig. 3.9
Model for enantioselective addition to a-keto esters catalyzed by (t-Bu-box)Cu(OTf )2 .
the pendant ligand substituent (Figure 3.10). The disposition of the aOTMS and aSR groups are less important in this model, a point that is supported by the relative insensitivity of reaction diastereoselectivity as a function of enolsilane geometry.
General Experimental Procedure
In an inert atmosphere box, (S,S)-bis(tert-butyloxazoline) (15 mg, 0.050 mmol) and Cu(OTf )2 (18 mg, 0.050 mmol) were placed in an oven-dried
Me
Me
Me
2+ O
O N
N Cu CMe3 Me3C O Me O H Me
Me
N
N Cu CMe3 Me3C O H O Me Me
OMe R'
2+ O
O
R
OMe R' R
R,R' = OTMS, SR
O HO Me Me3CS
CO2Me
O HO Me Me3CS
CO2Me
Me
Me
anti disfavored
syn favored
Fig. 3.10
Stereochemical models for syn-selective aldol reactions catalyzed by (t-Bu-box)Cu(OTf )2 .
87
88
3 Copper Lewis Acids
10-mL round-bottomed flask containing a magnetic stirring bar. The flask was fitted with a serum cap, removed from the inert atmosphere box, and charged with solvent (1.5–3.0 mL). The resulting suspension was stirred rapidly for 4 h with CH2 Cl2 to give a slightly cloudy bright green solution or 1 h with THF to give a clear dark green solution. The catalyst was cooled to 78 C, and the pyruvate (0.50 mmol) was added, followed by the silylketene acetal (0.60 mmol). The resulting solution was stirred at 78 C until the pyruvate was completely consumed (0.5 to 24 h) as determined by TLC (2.5% Et2 OaCH2 Cl2 ). The reaction mixture was then filtered through a 2 cm 4 cm plug of silica gel with Et2 O (60 mL). Concentration of the Et2 O solution gave the crude silyl ether which was dissolved in THF (5 mL) and treated with 1 m HCl (1 mL). After being stirred at room temperature for 1–5 h this solution was poured into a separatory funnel and diluted with Et2 O (20 mL) and H2 O (10 mL). After mixing the aqueous layer was discarded and the ether layer was washed with saturated aqueous NaHCO3 (10 mL) and brine (10 mL). The resulting ether layer was dried over anhydrous Na2 SO4 , filtered, and concentrated to provide the hydroxy esters. Purification was achieved by flash chromatography. 3.3.3
Enolsilane Additions to Unfunctionalized Aldehydes
In 1998, Kobayashi made the counterintuitive observation that the Lewis acid-catalyzed addition of enolsilanes to aldehydes could be conducted in wet organic solvents (e.g. 10% H2 O in THF) [20]. The initial study documented that a wide range of metal salts are effective in promoting Mukaiyama aldol reactions in an aqueous environment. It is particularly relevant to this chapter that Cu(ClO4 )2 acts as a catalyst (Eq. (11)), but is not particularly efficient (one turnover in 12 h at ambient temperature). The carbonyl addition pathway is clearly faster than Lewis or Brønsted acidcatalyzed decomposition of the enolsilane.
Ph
OTMS Me
O H
O
Cu(ClO 4)2 (20 mol %) h Ph
OH
Ph H2O/THF (1:9) 25 °C, 12 h
Ph
ð11Þ
Me 47%
This discovery led to the development of an enantioselective variant. Implicit requirements for aqueous enantioselective Mukaiyama aldol reactions include a strong association between the chiral ligand and the metal center that is not disrupted by water, and/or a ligand–metal complex that is considerably more active than the corresponding hydrated complex, M m (OH2 )n Xm . Given the documented activity of Cu(ClO4 )2 in water, attention was directed to bis(oxazoline) ligands, known to have strong affinity for Cu(II). The optimal catalyst with regard to both chemical and optical yield was the (i-Pr-
3.3 General Experimental Procedure
box)Cu(OTf )2 complex; H2 OaEtOH (1:9) was identified as the best solvent. Under the optimized reaction conditions a range of substituted enolsilanes underwent asymmetric catalyzed addition to aromatic, heteroaromatic, alkenyl, and aliphatic aldehydes with moderate to good enantioselectivity (Eq. (12)) [21]. The absolute stereochemistry of these aldol adducts is unfortunately not known, so speculation about the mechanism of asymmetric induction is premature at this time. Me
Me
N
N
O
O
CHMe2 53 24 mol % Cu(OTf)2 (20 mol %)
Me2HC
1
R
OTMS Me
O H
R
O
2
R
H2O/EtOH (1:9)
R
OH
O
Me 54a 74%, syn/anti = 3.2/1 67% ee (syn) O
OH
O iPr
Me 54b 81%, syn/anti = 3.5/1 81% ee (syn)
Me 54c 95%, syn/anti = 4.0/1 77% ee (syn)
O
O
OH
Et
Et Me 54d 91%, syn/anti = 4.0/1 79% ee (syn) O
Me
Cl 54e 88%, syn/anti = 2.6/1 76% ee (syn) O
iPr
54f 87%, syn/anti = 2.9/1 75% ee (syn) O
OH
O
Me
OH
S Me
54j 78%, syn/anti = 5.7/1 75% ee (syn)
54i 86%, syn/anti = 4.0/1 76% ee (syn)
54h 97%, syn/anti = 4.0/1 81% ee (syn) O
OH
Et
O
Me
54g 77%, syn/anti = 4.6/1 42% ee (syn)
OH
Et
iPr Me
OH OMe
Et Me
OH
OH
Et
OH
ð12Þ
Me
-10 °C, 20 h O
OH
1
2
O
OH
Et Me 54k 56%, syn/anti = 1.6/1 67% ee (syn)
Cl
Me 54l 94%, syn/anti = 2.3/1 57% ee (syn)
Subsequent experiments demonstrated that pure H2 O, rather than mixtures of H2 O and organic solvent could be used as the solvent, either by the
89
90
3 Copper Lewis Acids
use of an additive (Triton-X100, Eq. (13)) or a lipophilic Cu(II) salt in conjunction with a fatty acid additive (Eq. (14)) [22, 23]. Me
Me
N
N
O
O
MeO
OTMS Me
53 Me2HC (20 mol %) CHMe2 Cu(OTf) 2 (20 mol %)
OHC
Triton X-100 (3 mol %) H2O
Me
O
OH
MeO Me Me 54m
0 °C, 24 h
86%, 53% ee
ð13Þ Me
Me O
O
N 53 Me2HC 24 mol % CHMe2 Cu(O 3SOC12H25)2 (20 mol %) N
Me
OTMS Me
OHC
CH3(CH2)9CO2H (10 mol %) H2O
O
OH
Me Me
54b 23 ° C, 20 h 76%, syn/anti = 74/26, 69% ee (syn)
ð14Þ
3.4
Additions Involving In-Situ Enolate Formation
A continuing goal of organic chemists is the development of ‘‘direct’’ reactions in which the compounds undergoing reaction are activated in situ. The Mukaiyama aldol reaction, despite its broad utility, is not an example of a direct reaction, because preformation of an enolsilane in a separate step is a necessary requirement. Direct enolization and subsequent aldol reaction have been achieved in a handful of asymmetric Cu(II)-catalyzed reactions. 3.4.1
Pyruvate Ester Dimerization
Additions to pyruvate esters without pre-activation of the nucleophilic reactant have been explored by Jørgenson and co-workers. Ethyl pyruvate is enantioselectively dimerized in the presence of a chiral Cu(II) Lewis acid and catalytic quantities of a trialkylamine base to afford diethyl 2-hydroxy-2-
3.4 Additions Involving In-Situ Enolate Formation
methyl-4-oxoglutarate, 55 (Eq. (15)) [24]. Formation of the aldol was achieved with good enantiocontrol by use of (t-Bu-box)Cu(OTf )2 as catalyst in conjunction with a dialkylaniline base. Subtle interplay between the identity of the solvent, the counter-anion, and base were observed. The initial aldol adduct cyclizes in the presence of base and TBS-Cl to afford a highly substituted g-lactone 56 in moderate yield and with high enantioselectivity (Eq. (16)). The scope of this reaction beyond use of ethyl pyruvate was not described. Me
Me O
O N
N Cu Me3C TfO OTf CMe3 5 10 mol %
O 2 Me
CO2Et 37
PhNBn2 (10 mol %) Et2O
O Me OH EtO2C
(15)
CO2Et 55
>80% conversion, 93% ee Me
Me O
O N
N Cu 1) Me3C TfO OTf CMe3 5 10 mol %
O 2 Me
CO2Et
PhNMe2 (5 mol %)
37 2) Et3N, TBSCl
O
O
Me
(16)
CO2Et TBSO
56 48%, 96% ee
3.4.2
Addition of Nitromethane to a-Keto Esters
The enantioselective addition of nitroalkanes to carbonyl compounds (Henry reaction) has been documented by Jørgenson and co-workers [25]. With nitromethane as solvent, a combination of the (t-Bu-box)Cu(OTf )2 complex 5 (20 mol%) and Et3 N (20 mol%) effect room-temperature aldol reactions with a range of a-keto esters (Eq. (17)). The reaction is especially enantioselective with alkyl and aromatic groups on the ketone moiety. b,gUnsaturated-a-keto esters react with nitromethane to afford aldol products in good yield, but enantiocontrol is significantly lower than for aromatic or aliphatic substrates. Product partitioning is completely selective, however, for the 1,2-mode of addition compared with 1,4-conjugate addition. This selectivity is not observed when the reaction is conducted in the absence of (t-Bu-box)Cu(OTf )2 , leading the authors to propose that the nitronate anion might be coordinated to the metal center during the catalytic reaction. Triethylamine is uniquely suited as catalytic base in this reaction: N-
91
92
3 Copper Lewis Acids
methylmorpholine, dimethylaniline, tribenzylamine, pyridine, ethyl diisopropylamine, and potassium carbonate are all inferior with regard to both yield and enantiocontrol. Enantioselectivity is optimal for the t-Bu-box ligand and triflate counter-ion (as compared with hexafluoroantimonate). Me
Me O
O N
N Cu Me3C TfO OTf CMe3 5 20 mol %
O CO2Et
R
Et3N (20 mol %) CH3NO2 25 °C
HO Me
HO Et
O2N
CO2Et 57a 95%, 92% ee
HO R O2N
CO2Et
Ph HO C6H13
HO
O2N
CO2Et 57b 46%, 90% ee
ð17Þ
57
O2N
O2N
CO2Et 57c 47%, 77% ee
CO2Et 57d 91%, 93% ee
Me Me
Me HO
HO O2N
CO2Et
57e 97%, 94% ee
O2N
HO CO2Et
57f 92%, 94% ee
O2N
CO2Et
57g 90%, 94% ee
Cl
HO CO2Et 57i 81%, 86% ee
O2N
CO2Et 57j 91%, 88% ee
CO2Me 57m 95%, 35% ee
OMe
HO
HO
O2N
CO2Et 57k 99%, 93% ee
Ph
O2N
CO2Et 57l 68%, 57% ee
Me
HO O2N
Me CO2Et 57h 99%, 92% ee
O2N
NO2
HO
O2N
HO
HO O2N
CO2Me 57n 95%, 30% ee
HO O2N
CO2Et 57o >96%, 60% ee
Reactant stoichiometry is critical in the catalyzed Henry reaction. With a 20% loading of (t-Bu-box)Cu(OTf )2 catalyst optimum enantiocontrol (92% ee for the reaction of nitromethane with ethyl pyruvate) is realized by use of 20 mol% Et3 N. In contrast, using 15 mol% Et3 N under otherwise identical conditions leads to a product enantiomeric excess of only 56%. Use
3.4 Additions Involving In-Situ Enolate Formation
of 25 mol% Et3 N leads to a product with 73% ee. The diminished enantioselectivity when employing excess base relative to Lewis acid can be accounted for by a racemic pathway – Et3 N alone catalyzes non-selective nitroaldol addition. The reason for reduced selectivity in the presence of excess Lewis acid (relative to base) is less clear. Another distinctive feature of the (t-Bu-box)Cu(OTf )2 -catalyzed Henry reaction is reversed p-facial selectivity relative to that normally obtained with this catalyst (vide supra). Indeed, the usual distorted square-planar arrangement (cf. Figures 3.8 and 3.9) cannot correctly account for the stereochemistry observed (the absolute stereochemistry of 57j was determined by X-ray crystallography). Jørgenson and co-workers instead propose that the ketone carbonyl and the nitronate anion coordinate to the Cu(II) center in the ligand plane, with the carboethoxy group bound in the axial position to complete the square pyramidal complex (Figure 3.11). The Zimmerman– Traxler chair-like transition structure is proposed on the basis of the observation of complete 1,2-selectivity in additions to b,g-unsaturated-a-keto Me
Me O
O
Me
CMe3 N N Cu O OO
H
O
N
O
H
Me3C
CMe3 Me
EtO
Me H O N Cu N O H OO Me CMe3 N O EtO
Me O
Me O
O
Me
H CMe3 N N Cu O CMe3 O R O N H O OEt
Me3C H R
O EtO
R OH O2N
CO 2Et
disfavored Fig. 3.11
Proposed stereochemical model for enantioselective Henry reactions catalyzed by (t-Bu-box)Cu(OTf )2 .
H N
N O Cu
O N O
Me
CMe3
HO R O2N
CO 2Et favored
O
93
94
3 Copper Lewis Acids
esters. One possible explanation of this selectivity is that the electropositive metal center directs addition to the carbonyl, rather than the CbC p bond. The strong preference for one of the two diastereomeric transition structures illustrated is less clear, because both require interaction of one reaction component (either a-keto ester or nitronate) with the bulky tert-butyl group of the ligand. 3.4.3
Malonic Acid Half Thioester Additions to Aldehydes
Shair and coworkers have developed a mild aldol addition based on the decarboxylative Claisen condensation that is the key step in polyketide biosynthesis [26]. Malonic acid half thioesters (MAHT) are employed as enolate equivalents in addition reactions with aldehydes catalyzed by Cu(2-ethylhexanoate)2 and 5-methoxybenzimidazole. This metal salt and additive were optimized after initial screening experiments that identified Cu(OAc)2 and imidazole as promising leads for the desired transformation. The decarboxylative aldol addition is performed at ambient temperature under ambient atmosphere in wet solvent to afford moderate to excellent yields of the b-hydroxy thioesters (Figure 3.12). The substrate scope is good with regard to the electrophile. A common problem with direct aldol reactions is self-condensation of enolizable aldehydes; the reaction is not observed in this instance, demonstrating the mildness of the reaction. Good levels of diastereocontrol are observed when a-methyl MAHT are used. These diastereomer ratios are kinetic values, not thermodynamic, as judged by resubmission experiments. In the absence of aldehyde, no decarboxylation is observed, suggesting that a Cu(II)-thioacetate enolate is not on the reaction pathway. The authors propose that enolization of the MAHT by the amine base might be required for the reaction to proceed. No incorporation of a second aldehyde into an isolated aldol adduct is observed under the catalyzed reaction conditions – retro-aldol reactions do not occur.
General Experimental Procedure
5-Methoxybenzimidazole (0.11 mmol, 0.22 equiv.) and Cu(2-ethylhexanoate)2 (0.1 mmol, 0.2 equiv.) were added to a stirred solution of malonic acid half benzylthioester (0.5 mmol, 1.0 equiv.) in THF (5 mL; solvent stored in a vial without protection from the air before use) at 23 C. After the reaction became homogeneous (ca. 1 min) aldehyde (0.5 mmol, 1.0 equiv.) was added. The solution was stirred at 23 C for the prescribed time and quenched with 0.5 m HCl solution. The resulting solution was diluted with EtOAc and washed successively with 0.5 m HCl, saturated aq. NaHCO3 , and brine. The organic layer was dried over Na2 SO4 , filtered through cotton,
H
Cu O
Cu O
Et 59
N H (22 mol %) wet THF
N
(20 mol %)
O
N H (22 mol %) wet THF
N
Et 59 (20 mol %)
OMe
2
2
BnS
BnS
O
R
OH
R
OH
Me
60
O
O
CO2Et
Me
Me
70%
81%
97%
85%
Ph 82%
61a R = (CH2)2Ph: 52%, 7:1 syn/anti 82%, 8:1 syn/anti 61b R = CO2Et:
Me
OMe
Me
Direct aldol additions of MAHT catalyzed by Cu(II) complexes.
O R
CO2H
R
CO2H
Me 58b
O
H
O
58a
Fig. 3.12
BnS
BnS
O
O
Ph
Ph OMOM
NO2
74%
22%
82%
65%
3.4 General Experimental Procedure 95
96
3 Copper Lewis Acids
and concentrated under reduced pressure. The product was purified by continuous gradient flash column chromatography. 3.4.4
Dienolate Additions to Aldehydes Scope and Application Activation of silyl enolates toward aldol additions can be achieved by desilylation. Carreira and coworkers developed this approach in highly enantioselective additions of silyl dienolates to aromatic, heteroaromatic, and a,b-unsaturated aldehydes in the presence of an (S-Tol-BINAP)CuF2 catalyst [27]. The copper fluoride catalyst is generated in situ by treatment of S-Tol-BINAP with Cu(OTf )2 , followed by addition of a crystalline, anhydrous fluoride source, (Bu 4 N)Ph3 SiF2 (TBAT). When as little as 2 mol% is used, (S-Tol-BINAP)CuF2 (63) catalyzes enantioselective addition of a silyl dioxolanone-derived dienolate to a range of aldehydes at 78 C (Eq. (18)). Selectivity ranged from good to excellent (83–95% ee) for all substrates except a-methylcinnamaldehyde, for which the level of enantioinduction was somewhat lower (65% ee). Aliphatic aldehydes are also selective electrophiles, but alkylnals suffered from low yields (< 40%). 3.4.4.1
(pTol)2 P CuF2 P (pTol)2
RCHO
Me
Me
O
O
63 2 mol %
+
THF, -78 °C; then CF3CO2H
OSiMe3 62
Me
Me
O
O
OH R
O 64a-j
CHO
CHO
S
CHO
O
CHO
ð18Þ a: 92%, 94% ee
b: 86%, 93% ee
c: 98%, 95% ee
CHO
CHO
CHO OMe
MeO e: 93%, 94% ee
Me
d: 91%, 94% ee
f: 83%, 85% ee
Me
CHO
h: 48%, 91% ee
Me
CHO
i: 81%, 83% ee
g: 82%, 90% ee
Ph
CHO Me
j: 74%, 65% ee
3.4 General Experimental Procedure
(S-Tol-BINAP)CuF2 -catalyzed addition of silyl dienolates to aldehydes has found synthetic utility in the construction of the polyol subunit of amphotericin B (Scheme 3.9) [28]. Both key fragments of the polyol chain (C1 aC13 ) were derived from the same aldol reaction of furfural and the trimethylsilyl dienolate, differing only in the antipode of (Tol-BINAP)CuF2 catalyst used. It is noteworthy that the furfural aldol adduct can be obtained in >99% ee after a single recrystallization of the aldol product. Chiral copper enolate methodology has also been employed for the total synthesis of leucascandrolide A [29]. Crotonaldehyde reacts with the aforementioned trimethylsilyl dienolate in the presence of 2 mol% (R-TolBINAP)CuF2 to afford the allyl alcohol adduct in 91% ee and 42% yield (Scheme 3.10). Yields were hampered in this instance because of crotonaldehyde polymerization, as noted by the authors. Further elaboration of this aldol product furnished a highly convergent synthesis of leucascandrolide A. Mechanistic Considerations [30] The hard fluoride anion is an effective desilylating agent. When mismatched with a soft Cu(II) cation the fluoride anion is designed to serve as an in-situ means of enolate formation. This is achieved by desilylation of the enolsilane, then by metalation. Supporting evidence for copper enolate formation was obtained by independent synthesis – when silyldienolate 62 is subjected to MeLi (10 mol%) followed by (S-BINAP)Cu(OTf )2 and benzaldehyde the expected aldol adduct is obtained in good yield and enantioselectivity. Similar results are obtained by employing (Bu 4 N)Ph3 SiF2 as the desilylating reagent. Mechanistic studies by Carreira and coworkers have concluded that the catalytically active species is the Cu(I) dienolate depicted in Scheme 3.11. Cu(II) complexes are known to undergo a one-electron reduction in the presence of enolsilanes. Thus desilylation of the silyl enolate via the hard fluoride anion of the copper complex followed by copper metalation gives the putative Cu(I) dienolate 66. The same (S-Tol BINAP)Cu(dienolate) has been observed independently via desilylation of the trimethylsilyl dienolate by (Bu 4 N)Ph3 SiF2 , followed by treatment with (S-Tol-BINAP)Cu(ClO4 ). Formation of the (S-Tol BINAP)Cu(dienolate) species and its disappearance after addition of benzaldehyde was closely monitored by IR spectroscopy (ReactIR). Regeneration of the catalytically active species is achieved by desilylation of another molecule of silyldienolate by the resulting Cu(I) alkoxide complex (68 ! 69 þ 66). Reactivity is also observed in the presence of catalytic quantities of (S-Tol-BINAP)Cu(O t Bu), with identical yields and selectivity as with the corresponding Cu(I) or Cu(II) fluoride catalysts, providing corroborating evidence for the proposed mechanism. 3.4.4.2
General Procedure. A mixture of Cu(OTf )2 (3.6 mg, 0.010 mmol, 2 mol%) and (S)-Tol-BINAP (7.5 mg, 0.011 mmol, 2.2 mol%) in 2 mL THF was stirred at 23 C in an inert gas atmosphere for 10 min to yield a clear yellow
97
Me
HO
Me
O
Me
THF, -78 °C
ent-63 2 mol%
Application of (S-Tol-BINAP)CuF2 -catalyzed additions of silyl dienolates to the polyol subunits of amphotericin B.
*
O
Me
O
Me BuPh2SiO
Scheme 3.9
t
O
*
OH
ent-64d
O
O O
Me
Me
1
O
(pTol)2 P CuF2 P (pTol)2
O
+
OSiMe3
* OH
THF, -78 °C
63 2 mol%
OH
13
OH
CO2H
OMycosamine
OH OH O
CHO
O
Me
amphotericin B
*
OH OH
O
Me
(pTol)2 P CuF2 P (pTol)2
H O
*
O
Me
O
Me
O
Me
O
Me t OSi BuMe2
O 64d 95%, > 99% ee *
OH O
98
3 Copper Lewis Acids
3.4 General Experimental Procedure
Me
Me
O
O
(pTol) 2 P CuF 2 P (pTol) 2 OTMS
62 +
OH O
Me O
*
Me
THF, -78 °C
O Me
Me ent-63 2 mol%
O
ent-64h 42%, 91% ee
H Me *
O
OM O
O
O
O
N O
HN
O
MeO
Me
O Me leucascandrolide A
Scheme 3.10
Application of an (S-Tol-BINAP)CuF2 catalyzed addition of a silyl dienolate to the leucascandrolide A.
solution. A solution of Ph3 SiF2 (Bu 4 N) (10.8 mg, 0.02 mmol, 4 mol%) in 0.5 mL THF was added via a cannula and stirring was continued for 10 min. The mixture was cooled to 78 C and the dioxenone-derived dienolate (0.16 mL, 0.75 mmol) was added dropwise, followed by a solution of the aldehyde (0.50 mmol) in 0.5 mL THF. The progress of the reaction was monitored by TLC (reaction times 0.5–8 h). On completion trifluoroacetic acid (0.2 mL) was added at 78 C and the solution was left to warm to 23 C. Stirring was continued an another hour. The reaction mixture was diluted with ether (5 mL) and a saturated aqueous solution of NaHCO3 was added dropwise until evolution of gas ceased. The organic layer was washed with brine (3 mL), dried over Na2 SO4 , and concentrated in vacuo. Purification of the crude material by chromatography on silica gel with 3:1 ether– hexanes afforded the aldol adduct. The enantiomeric excess of the alcohol products was determined by HPLC analysis using a racemic sample as reference. 3.4.5
Enantioselective Cu(II) Enolate-Catalyzed Vinylogous Aldol Reactions
The traditional challenge associated with vinylogous aldol reactions is competition between reactivity at the a or g positions of the vinyl enolate. For-
99
OSiMe3
-FSiMe3
62
O
O
Proposed catalytic cycle for (S-TolBINAP)CuF2 -catalyzed additions of silyl dienolates to aldehydes.
(pTol) 2 P Cu(OTf) 2 P (pTol) 2
Ph3SiF 2(NBu4)
Scheme 3.11
65
63
(pTol) 2 P CuF2 P (pTol) 2
Me
Me
O
Me
OCu
R
Me3SiO
66
O
Me
RCHO
69
O
Me
P
P
62
O
O O
R
Cu O
O
Me
68
OSiMe3
P
P
Me
Me
Me
O H 67
Me O O
Me
O
P R Cu O P
O
Me
O
100
3 Copper Lewis Acids
3.5 Conclusions
mation of the a-aldolate product has been suppressed by employing bulky Lewis acids such as aluminum tris(2,6-diphenyl)phenoxide (ATPH). Campagne and Bluet also discouraged a-aldolate formation and rendered the vinylogous aldol enantioselective by use of Carreira’s catalyst system (Eq. (19)) [31]. In the presence of 10 mol% (S-Tol-BINAP)CuF2 (63), the authors observed only the g-aldol products 70 in moderate enantioselectivity at ambient temperature. The authors propose that the catalytic cycle is analogous to that of the Carriera system, although no mechanistic studies of this system have yet been reported.
(pTol)2 P CuF2 P (pTol)2 63 10 mol%
OSiEt3 RCHO
+
OEt
OH R
THF, RT
OEt
Me OH
70a-d Me OH
O
O OEt
OEt 70a
O
Me
70b
80%, 70% ee
Me
OH
O
OH
O
OEt 70c
ð19Þ
70%, 48% ee
Me
35%, 56% ee
OEt 70d Me 68%, 77% ee
3.5
Conclusions
Copper complexes enable mechanistically diverse and synthetically useful approaches to the synthesis of b-hydroxy ketones. The Cu(II)-catalyzed asymmetric Mukaiyama aldol reaction developed by Evans provides facile stereocontrolled access to a range of aldol adducts derived from chelating electrophiles. Subsequent extension of this system in the context of ‘‘green’’ chemistry, described by Kobayashi, enabled access to aldols from unfunctionalized aldehydes. Recent efforts have focused on the use of copper complexes to effect direct aldol unions by way of in-situ enolization. Under this general mechanistic umbrella, reports of addition of nitromethane to pyr-
101
102
3 Copper Lewis Acids
uvate esters, malonic half thioester additions to aldehydes, and desilylative dienolate additions have been described. It is both remarkable and exciting that these mechanistically dissimilar reactions are all catalyzed by the same metal. Given that nearly all of the examples from this chapter were reported after 1995 it is reasonable to expect continued interest and development in these fundamental bond constructions.
References 1 M. Iwata, S. Emoto, Chem. Lett. 1974, 959–960. 2 K. Irie, K.-i. Watanabe, Chem. Lett. 1978, 539–540. 3 Y. Ito, T. Matsuura, T. Saegusa, Tetrahedron Lett. 1985, 26,
5781–5784. 4 D. A. Evans, J. A. Murry, M. C. Kozlowski, J. Am. Chem.
Soc. 1996, 118, 5814–5815. 5 D. A. Evans, M. C. Kozlowski, J. A. Murry, C. S. Burgey,
6 7
8 9 10 11 12 13 14
15 16 17 18 19 20
K. R. Campos, B. T. Connell, R. J. Staples, J. Am. Chem. Soc. 1999, 121, 669–685. D. A. Evans, D. M. Fitch, T. E. Smith, V. J. Cee, J. Am. Chem. Soc. 2000, 122, 10033–10046. D. A. Evans, P. H. Carter, E. M. Carreira, A. B. Charette, J. A. Prunet, M. Lautens, J. Am. Chem. Soc. 1999, 121, 7540– 7552. D. A. Evans, E. Hu, J. D. Burch, G. Jaeschke, J. Am. Chem. Soc. 2002, 124, 5654–5655. H. Matsunaga, Y. Yamada, T. Ide, T. Ishizuka, T. Kunieda, Tetrahedron: Asymmetry 1999, 10, 3095–3098. T. K. Hollis, B. Bosnich, J. Am. Chem. Soc. 1995, 117, 4570– 4581. C. Girard, H. B. Kagan, Angew. Chem. Int. Ed. 1998, 37, 2923–2959. D. A. Evans, M. C. Kozlowski, C. S. Burgey, D. W. C. MacMillan, J. Am. Chem. Soc. 1997, 119, 7893–7894. D. A. Evans, C. S. Burgey, M. C. Kozlowski, S. W. Tregay, J. Am. Chem. Soc. 1999, 121, 686–699. For recent modifications to the bis(oxazoline) ligand and application to the pyruvate addition, see: H. L. van Lingen, J. K. W. van de Mortel, K. F. W. Hekking, F. L. van Delft, T. Sonke, F. P. J. T. Rutjes, Eur. J. Org. Chem. 2003, 317–324. R. Roers, G. L. Verdine, Tetrahedron Lett. 2001, 42, 3563– 3565. S. Orlandi, A. Mandoli, D. Pini, P. Salvadori, Angew. Chem. Int. Ed. 2001, 40, 2519–2521. F. Reichel, X. M. Fang, S. L. Yao, M. Ricci, K. A. Jorgensen, Chem. Commun. 1999, 1505–1506. P. I. Dalko, L. Moisan, J. Cossy, Angew. Chem. Int. Ed. 2002, 41, 625–628. J. S. Johnson, D. A. Evans, Acc. Chem. Res. 2000, 33, 325– 335. S. Kobayashi, S. Nagayama, T. Busujima, J. Am. Chem. Soc. 1998, 120, 8287–8288.
References 21 S. Kobayashi, S. Nagayama, T. Busujima, Tetrahedron 1999,
55, 8739–8746. 22 K. Manabe, S. Kobayashi, Chem. Eur. J. 2002, 8, 4095–4101. 23 S. Kobayashi, K. Manabe, Acc. Chem. Res. 2002, 35, 209–217. 24 K. Juhl, N. Gathergood, K. A. Jorgensen, Chem. Commun.
2000, 2211–2212. 25 C. Christensen, K. Juhl, R. G. Hazell, K. A. Jorgensen, J.
Org. Chem. 2002, 67, 4875–4881. 26 G. Lalic, A. D. Aloise, M. S. Shair, J. Am. Chem. Soc. 2003,
125, 2852–2853. 27 J. Krueger, E. M. Carreira, J. Am. Chem. Soc. 1998, 120,
837–838. 28 J. Kruger, E. M. Carreira, Tetrahedron Lett. 1998, 39, 7013–
7016. 29 A. Fettes, E. M. Carreira, Angew. Chem. Int. Ed. 2002, 41,
4098–4101. 30 B. L. Pagenkopf, J. Kruger, A. Stojanovic, E. M. Carreira,
Angew. Chem. Int. Ed. 1998, 37, 3124–3126. 31 G. Bluet, J. M. Campagne, J. Org. Chem. 2001, 66, 4293–
4298.
103
105
4
Tin-promoted Aldol Reactions and their Application to Total Syntheses of Natural Products Isamu Shiina 4.1
Introduction
Stereoselective aldol reactions are frequently used for synthesis of complicated natural and unnatural oxygenated products, because b-hydroxy carbonyl groups are now easily prepared by several effective methods. Among the three stable valences of tin, the stannic and stannous species are generally used for effective formation of the desired aldol adducts from two starting materials. These tin-promoted reactions are divided into two types according to the principles: (i) directed Mukaiyama aldol reaction of silyl enolates with carbonyl compounds promoted by Sn(IV) or Sn(II) Lewis acids, and (ii) the crossed aldol addition of C- or O-enolates with Sn(IV) or Sn(II) to other carbonyl components. This review first covers Sn(IV)mediated aldol reactions of enol silyl ethers (ESE) or ketene silyl acetals (KSA) with carbonyl compounds or acetals, which have been developed as powerful tools for stereoselective synthesis of b-hydroxy or b-alkoxy carbonyl groups. Chiral diamine–Sn(II) complex-promoted aldol and related addition reactions for preparation of a variety of optically active polyoxy compounds will be the second subject discussed. Finally, recent applications of the reactions to highly enantioselective syntheses of optically active natural products will be described.
4.2
Tin-promoted Intermolecular Aldol Reactions 4.2.1
Achiral Aldol Reactions
In 1973, Mukaiyama and Narasaka developed an acid-catalyzed aldol reaction of silyl enolates with electrophiles and revealed that Lewis acids such as TiCl 4 , SnCl 4 , AlCl3 , BF3 OEt2 , and ZnCl2 promoted the reaction quite Modern Aldol Reactions. Vol. 2: Metal Catalysis. Edited by Rainer Mahrwald Copyright 8 2004 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim ISBN: 3-527-30714-1
106
4 Tin-promoted Aldol Reactions and their Application to Total Syntheses of Natural Products
effectively, affording a variety of b-hydroxy ketones from ESE and carbonyl compounds (Eq. (1)) [1]. The synthetic capacity of KSA in the new aldol reaction was also reported in 1975, and the corresponding b-hydroxy- and b-siloxycarboxylic esters were obtained in good combined yields by use of TiCl 4 (Eq. (2)). OTMS
O + Ph
Ph
H
(1)
CH2Cl 2, -78 °C 83% OTMS
O + R
OH O
SnCl 4
H
R1
OR' O
TiCl 4
OR3
CH2Cl 2, -78 °C 84~99%
R2
OR3
R
(2)
R1 R2 R' = H or TMS
Although it is mentioned in their reports that TiCl 4 seems to be superior to other Lewis acids with regard to yield, SnCl 4 was also a popular reagent because of its mild activity and good chelation ability. For example, Wissner applied the SnCl 4 -mediated aldol reaction of tris(trimethylsiloxy)ethene with several aldehydes to the synthesis of a,b-dihydroxycarboxylic acids (Eq. (3)) [2] and Ricci and Taddai prepared a bicyclic g-lactone in good yield by aldol addition of 2,5-disiloxyfuran to two molar amounts of acetone using SnCl 4 (Eq. (4)) [3].
O R
2
OTMS
+
TMSO
H
O
+
TMSO
OTMS
O
OTMS
OH O
SnCl4 R
OH
58~82%
SnCl 4
(3)
OH O
O
(4) CH2Cl 2, -78 °C 70%
O
O
In 1983, Kuwajima and Nakamura reported a novel method for generation of a-stannylketones from ESE and SnCl 4 and studied the properties of the new metallic species in the reaction with carbonyl compounds giving aldol adducts (Eq. (5)) [4]. This facile method for preparing trichlorostannyl enolates was successfully employed in the regioselective synthesis of aldols, as shown in Eq. (6) [5]. Interestingly, syn selectivity was observed in this alternative method, in contrast with the anti selectivity obtained in the direct SnCl 4 -promoted aldol reaction of ESE with the electrophiles (Eqs. (5) and (7)) [1]. Therefore, dif-
4.2 Tin-promoted Intermolecular Aldol Reactions
O OTMS
O
SnCl 4
Ph
CI3Sn
α-stannylketone O + Ph
ð5Þ
Ph CH2Cl 2, -70 °C 80%
CH 2Cl 2, 20 °C
O
OH O
H
OH O
SnCl 4
TMS
syn/anti =93/7
Ph
H
CH2 Cl2 -78 to -50 ˚C 81%
Ph
(6)
Ph
ferent mechanisms were proposed for these reactions, and it was assumed that the silyl nucleophiles could directly attack the carbonyl compounds activated by the Lewis acid at low temperature. OTMS
SnCl4
O Ph
H
O
OH O
SnCl 4
(7) Ph
CH2Cl 2, -78 °C
Ph
H
activated aldehyde
CH2Cl 2, -78 °C 83%
syn/anti = 24/76
Structural features and reactivity of the Sn(IV) C- or O-enolates have been investigated [6, 7]. Yamamoto and Stille independently studied the aldol reaction of stannyl enolates derived from ketones with aldehydes, and showed that stereoselectivity depended on the substituents on the tin and the reaction temperature (Eqs. (8) and (9)) [8, 9]. O OLi
Ph3SnCl
OSnPh3
Ph
OH O
H Ph
rt Sn(IV) enolate
THF -70 °C 80%
(8)
syn/anti = 71/29
O OAc
Bu3SnOMe
OSnBu3
rt isolated Sn(IV) enolate
Ph
H
OH O
Ph ð9Þ THF -78 °C; 78% -78 °C; syn/anti = 20/80 45 °C; 86% 45 °C; syn/anti = 77/23
107
108
4 Tin-promoted Aldol Reactions and their Application to Total Syntheses of Natural Products
Mukaiyama and Iwasawa developed a facile method for the generation of Sn(II) enolates in situ from the corresponding carbonyl compounds with Sn(OTf )2 and a tertiary amine (Eqs. (10) and (11)) [10], and excellent syn selectivity of the aldol reaction was observed in the course of their studies of Sn(II) enolate chemistry (described in a later section). O O
OSnOTf
Sn(OTf) 2
Ph
OH O
H Ph
-78 °C 41%
NEt Sn(II) enolate
syn/anti =>95/5
CH2 Cl2, -78 °C
S
O N
(10) O
OTf Sn S O
Sn(OTf) 2
Ph
S N
NEt CH2Cl 2, -78 °C
S
-78 °C 94%
S
OH O
H Ph
N
S
syn/anti =97/3
Sn(II) enolate
ð11Þ
4.2.2
The Reaction of Silyl Enolates with Aldehydes or Ketones
Diastereoselective addition of ESE and KSA to aldehydes using SnCl 4 were systematically studied by Heathcock, Reetz, and Gennari, who produced a variety of synthetic intermediates. As shown in Eqs. (12)–(15), Heathcock and Reetz independently examined the stereoselectivity of the Mukaiyama aldol reaction of ESE with many kinds of aldehyde, promoted by SnCl 4 [11, 12]. Their results can be summarized: 1. good 2,3-anti or 2,3-syn asymmetric induction was observed in the reaction between achiral simple or a-heteroatom-substituted aliphatic aldehydes and ESE derived from ethyl ketones (Eqs. (12) and (13)); OTMS
O + R
Bu
OTMS
O BnO
t
H
Ph
(12)
syn/anti = 5/>95 OH O
SnCl 4 BnO CH2Cl 2, -78 °C >95% (conversion)
t Bu
R
CH2Cl 2, -78 °C 60~72%
+ H
OH O
SnCl 4
Ph
syn/anti = >95/5 [TiCl4 ; 90/10]
(13)
4.2 Tin-promoted Intermolecular Aldol Reactions
2. high 3,4-syn asymmetric induction was observed in the reaction between a-heteroatom-substituted aliphatic aldehydes and ESE derived from methyl ketones (Eq. (14)); and O
OH O
SnCl 4
OTMS +
H
Ph
OBn
Ph CH2Cl 2, -78 °C 68%
(14)
OBn syn/anti =>99/1
3. good 2,3-syn and high 3,4-syn asymmetric induction was observed in the reaction between a-heteroatom-substituted aliphatic aldehydes and ESE derived from ethyl ketones (Eq. (15)). O
OH O
SnCl 4
OTMS +
H
Ph
OBn
Ph CH2Cl 2, -78 °C 85%
BnO 2,3-syn/anti = 95/5 3,4-syn exclusively
(15)
The observed excellent 3,4-syn selectivity for the a-branched aldehyde was explained by the formation of a Lewis acid–aldehyde complex (so-called chelation model, Scheme 4.1). Good stereoselectivity was not achieved, however, when KSA was employed, even in the reaction with a-benzyloxypropionaldehyde, except when tetrasubstituted KSA were used (Eqs. (16)– (18)).
M O BnO
Nu-TMS
OH
β-face attack
H H Chelation Model
Nu BnO 3,4-syn selection
Me
M BnO Me
O
H R'
H TMSO
R' BnO R 2,3-syn-3,4-syn selection
OTMS
M O BnO R Me
OH O
favorable R H
OH O
unfavorable H R'
R' BnO R 2,3-anti-3,4-syn selection
Scheme 4.1
Chelation model for producing 3,4-syn aldols.
109
110
4 Tin-promoted Aldol Reactions and their Application to Total Syntheses of Natural Products
O H
O t Bu
OBn
O
CH2Cl 2, -78 °C 65%
OTMS +
H
CH2Cl 2, -78 °C >85%
OTMS +
H
syn/anti = 65/35
OH O
CH2Cl 2, -78 °C 93%
(17)
BnO syn/anti = >97/3
OH O
SnCl 4
OTMS
OBn
(16)
OBn
OMe
OMe
MeO
O t Bu
SnCl 4
OBn
O
OH O
SnCl 4
OTBS
+
OH OMe
BnO
(18)
2,3-syn/anti = 5/95 3,4-syn/anti =>99/1
Gennari further studied the Mukaiyama aldol addition of KSA to aldehydes and found that S- t Bu propanethioate or ethanethioate is a quite suitable precursor of the required KSA for stereoselective reactions [13]. Although the reaction of KSA derived from S- t Bu propanethioate with simple achiral aliphatic aldehydes gave poor 2,3-diastereoselectivity (Eq. (19)), it reacted with a-alkoxy aldehydes highly stereoselectively to afford 2,3-syn-3,4syn isomers as shown in Eq. (20). O
OTMS +
H
St Bu
SnCl 4
OH O
S t Bu CH2Cl 2, -78 °C E/Z=93/7; 86% E/Z=93/7; syn/anti = 42/58 E/Z=10/90; 80% E/Z=10/90; syn/anti =42/ 58
ð19Þ O
OTBS H
OBn
SnCl 4
+ St Bu
CH2Cl 2, -78 °C
OH O S t Bu
OBn E/Z = >95/5; 89% E/Z=>95/5; 2,3-syn/anti = 97/3 E/Z = 5/>95; 90% 3,4-syn exclusively E/Z=5/>95; 2,3-syn/anti = 76/24 3,4-syn exclusively
ð20Þ Furthermore, KSA derived from S- t Bu ethanethioate also gave a 3,4-syn adduct preferentially in good yield (Eq. (21)). The highly 3,4-syn asymmetric induction by chelation control using SnCl 4 is quite effective for the con-
4.2 Tin-promoted Intermolecular Aldol Reactions
111
struction of natural complex molecules (as is described at the end of this section). O H OBn
St Bu
OH O
SnCl4
OTBS +
CH2Cl 2, -80 °C 70%
St Bu
(21)
OBn syn/anti =>98/2
It is worthy of note that a-stannylthioesters, instantly generated from KSA by treatment with SnCl 4 , also react with aldehydes to afford the corresponding aldol adducts, but the stereoselectivity of this reaction is sometimes very different from that in the reaction involving KSA and an SnCl 4 – aldehyde complex (compare Eqs. (19) and (22), and Eqs. (20) and (23)). The order of addition of KSA and aldehydes to a solution of Lewis acid catalysts such as SnCl 4 should therefore be selected carefully in accordance with the stereoselectivity desired. O H
OTMS
O
SnCl4
S tBu CH2Cl 2, -78 °C
CH2 Cl2 -78 to 0 °C 45%
CI3Sn
St Bu
OH O St Bu syn/anti =>98/2
ð22Þ O H
α-stannylthioester OBn
OH O St Bu
CH2 Cl2 OBn -78 to -20 °C 2,3-syn/anti =10/90 75% 3,4-syn exclusively
(23) Further examples of the construction of multi-functional b-hydroxy carbonyl compounds using SnCl 4 are given in Eqs. (24)–(28). Although sulfursubstituted ESE derived from methylthioacetone reacted with a-alkoxy aldehyde to give a 3,4-syn adduct preferentially (Eq. (24)) [14], the reaction of KSA prepared from methyl a-methylthiopropionate afforded an almost equimolar mixture of the corresponding 3,4-syn and anti diol groups (Eq. (25)) [15]. A 2,3-anti-3,4-syn a-amino carboxylic ester was stereoselectively prepared by reaction of amino-substituted KSA with a-benzyloxypropionaldehyde (Eq. (26)), and the adduct was converted to the corresponding g-lactone which is known as a synthetic intermediate of l-daunosamine and l-vancosamine [16].
112
4 Tin-promoted Aldol Reactions and their Application to Total Syntheses of Natural Products
O
OTMS H
OH O
SnCl4
+
OBn
CH2Cl 2, -78 °C OBn SMe E/Z =80/20; 58% E/Z =17/83; 53% E/Z=80/20; 3,4-syn/anti =80/20 E/Z=17/83; 3,4-syn/anti =82/18
SMe
(24) O
OTMS H
+ MeS
OBn
OMe
OH O
SnCl4 CH2Cl 2, -78 °C
OMe SMe
BnO
E/Z=25/75
(25)
OH O
i) NaIO 4
OMe
ii) ∆
BnO 65%, syn/anti =52/48
O
OTMS H
OBn
+
Bn 2N
OtBu
OH O
SnCl4
OtBu CH2 Cl2 -78 to -40 °C 50%
OBn NBn2 2,3-syn/anti =16/84 3,4-syn/anti =>98/2 HO
NHZ O
ð26Þ
O
a known intermediate in the synthesis of aminosugars NH2
NH2
HO
HO O
OH
L-Daunosamine
O
OH
L-Vancosamine
It is notable that the reaction of KSA derived from ethyl acetate with an a-amino aldehyde in the presence of SnCl 4 gave a 3,4-syn amino alcohol under chelation-control conditions (Eq. (27)) [17] whereas the opposite diastereoselectivity was observed when an a-phenylthio aldehyde was used as the electrophile (Eq. (28)) [18] and a 3,4-syn aldol adduct was obtained when TiCl 4 was employed for the latter reaction instead of SnCl 4 . The 3,4-anti selectivity in the reaction promoted by SnCl 4 was therefore explained, as an exception, by the non-chelation model.
4.2 Tin-promoted Intermolecular Aldol Reactions
O
OH O
SnCl4
OTMS +
H NHBoc
OEt
OEt
CH2Cl 2, -78 °C 60%
NHBoc syn/anti =91/9
ð27Þ O
OH O
SnCl4
OTMS +
H
OMe
CH2Cl 2, -78 °C 78%
SPh
OMe PhS syn/anti = 2/>98 (non chelation) [TiCl 4; 86%, 80/20 (chelation)]
ð28Þ The SnCl 4 -promoted diastereoselective aldol reaction has been applied to the synthesis of some parts of complex molecules such as oligopeptides, oligosugars, and polyoxyamides (Eqs. (29)–(36)). Joullie´ obtained a 2,3-syn3,4-syn thioester by reaction of KSA derived from S- t Bu propanethioate with an a-alkoxy aldehyde, as shown in Eq. (29) [19]. The prepared intermediate was successfully converted to the macrocyclic peptides didemnin A, B, and C in 1990. O H
+
OH O
SnCl4
OTBS
St Bu
St Bu CH2Cl 2, -78 °C 74%
OBn
OBn exclusively
O Me N
N
ð29Þ PMP O
O O
O
NH
R=
O
Me N
OH
O O O
O
HO
O
NHR NH
Didemnin C
Danishefsky employed a trisubstituted butadiene for reaction with an aldehyde connected to a ribonucleoside, with promotion by SnCl 4 (Eq. (30)); subsequent desilylation of the adduct afforded the corresponding dihydropyran which was transformed to tunicamycins [20]. Cox and Gallagher employed a cyclic ESE as a nucleophile for reaction with ribosyl aldehyde, as depicted in Eq. (31); the aldol isomers formed could be used as precursors of tetracyclic hemiketals [21]. Akiyama and
113
114
4 Tin-promoted Aldol Reactions and their Application to Total Syntheses of Natural Products
OTBS BzO O
PMB N O N
MOMO O
O
PMB N O
OMe O
O SnCl 4
H
MOM TBS O O
O
N
OBz
CH2Cl 2, -78 °C
O
O
O
PMB N O
O HF
OMe
O
N
MeCN, 0 °C 61% (2 steps)
MOMO O
O
O
Bz O
5 4
O
O
with another 4,5-cis isomer
O
H N
O N HO
HO
OH
H O
O
O
H N
R O
O
NHAc
O
OH HO
OH OH
Tunicamycins, R = unsaturated alkyl chains
ð30Þ Ozaki developed a new chiral auxiliary group in the diastereoselective synthesis of optically active aldols with a tertiary hydroxyl group (Eq. (32)) [22]. For example, (R)-dimethyl citramalate was synthesized from an adduct produced by the SnCl 4 -accelerated aldol reaction of KSA derived from ethyl acetate with the chiral pyruvate. O O
O O
OTBS H
OBn
OH O SnCl4
O
O
+ O
CH2Cl 2, -78 °C 35%
O OBn syn/anti = 50/50 O
(31) H
H 2, Pd/C 50%
H O
O
H
O
O O
H
O
OH
4.2 Tin-promoted Intermolecular Aldol Reactions
115
OTBS O
OTBS O
O
OEt SnCl 4
O
O
OTBS HO O
O
OEt
O
O
O
O
CH2Cl 2, -20 °C 80%
O
O
O
>98% de O
HO MeO
OMe
O (R)-Dimethyl citramalate
ð32Þ Mukai and Hanaoka reported the formal synthesis of AI-77B in which they successfully used the stereoselective direct aldol reaction of KSA derived from S- t Bu ethanethioate with an a-alkoxy aldehyde (Eq. (33)) [23].
TBSO
O
Ph
OTBS H
OBn
+
S t Bu
SnCl 4
TBSO
OH O St Bu
Ph CH2Cl 2, -78 °C 53% (2 steps, from the corresponding thiol ester)
OBn
O O
OH NH2 O
H N
OH O
OH
AI-77B
ð33Þ
They also used an a-trichlorostannyl thioester generated from KSA with SnCl 4 in a reaction with an a-alkoxy aldehyde to produce a 2,3-anti-3,4-syn aldol group which was employed as an intermediate in the total synthesis of bengamide E, as shown in Eq. (34) [24]. Recently, Boeckman re-applied this methodology for the practical preparation of bengamide B, E, and Z (Eq. (35)) [25]. Mukai and Hanaoka also used SnCl 4 as catalyst in the reaction of the KSA derived from S- t Bu ethanethioate with an a,b-dibenzyloxy aldehyde possessing a Co complex part, to produce a new synthetic intermediate of
116
4 Tin-promoted Aldol Reactions and their Application to Total Syntheses of Natural Products
OTMS MeO
TBSO
O
SnCl 4 Cl 3Sn
St Bu CH Cl , -78 °C 2 2
St Bu
O H
+ OBn
OMe
E/Z=75/25 TBSO
OH O StBu
CH 2Cl2, -78 to 0 °C 73% (2 steps, from the corresponding thiol ester)
OBn OMe 2,3-syn/anti =8/92 3,4-syn exclusively OH OH O
OH OMe
NH
N H
O
ð34Þ
Bengamide E
OTMS MeO
SnCl 4
SPh CH Cl , -78 °C 2 2
TBSO
O Cl 3Sn
SPh
O
+
H OR
OMe TBSO
OH O
SPh CH2Cl 2, -78 °C OR OMe R = Bn; 73% R = Bn; 2,3-syn/anti =8/92 R = 2-naphthylmethyl; 73% R = 2-naphthylmethyl; 2,3-syn/anti =11/89 R2 OH OH O
OH OMe
N H
Bengamide B, E, Z
NR1 O
ð35Þ
bengamide E under direct Mukaiyama aldol-reaction conditions (Eq. (36)) [26]. In contrast, non-metalated a,b-dibenzyloxy aldehyde stereorandomly reacted with the same KSA to give a mixture of isomers, and a similar result was also observed in Liu’s recent research (Eq. (37)) [27].
4.2 Tin-promoted Intermolecular Aldol Reactions
BnO
BnO
O + MeO
OH O
SnCl 4
OTMS
H OBn Co(CO)3 Co (CO) 3
St Bu
E/Z =75/25
117
St Bu OBn OMe Co(CO)3 Co (CO) 3
CH2 Cl 2 -78 to 0 °C
BnO
CAN
OH O St Bu
MeOH, 0 °C 47% (3 steps, from the corresponding alcohol)
OBn OMe exclusively
OH OH O NH
N H
O
OH OMe Bengamide E
ð36Þ BnO
O H + MeO
SPh
OBn
BnO
SnCl 4
OTMS
OH O SPh
any Lewis Acid
OBn OMe no selectivity
ð37Þ 4.2.3
The Reaction of Silyl Enolates with Acetals
Mukaiyama reported that acetals are also activated by Lewis-acid catalysts and are effectively coupled with nucleophilic ESE and KSA to give the desired b-alkoxy carbonyl compounds in high yields (Eq. (38)) [28]. Kuwajima showed that trichlorostannyl C- or O-enolates could be used as nucleophiles in reactions with acetals and aldehydes (Eq. (39)) [5]. OTMS
OEt + Ph
CH2Cl 2, -78 °C 95% O
CI
(38)
Ph
OEt
OMe
OEt O
TiCl 4
+
TMS
OMe Ph
SnCl 4 CH2 Cl2 -78 to -40 °C 72%
OMe O CI
(39) Ph
118
4 Tin-promoted Aldol Reactions and their Application to Total Syntheses of Natural Products
Some examples of reactions using ESE and KSA with acetals to produce the corresponding b-alkoxy carbonyl compounds are given in Eqs. (40)–(43) [29–32]. This method is useful for the synthesis of protected aldols directly from the silyl enolates and acetals. OMe +
OMe
N SO2Ph
OMe O
SnCl 4
OTMS Ph
Ph
N SO2Ph
CH2Cl 2, -70 °C 93%
(40)
Ph
N H
TMS
SnCl 4
OTMS
TMS
O
+ C5H 11
F F Br
O
OMe
Ph
OTMS
OEt
O
Ph
(41)
F F
SnCl 4
+
OEt O
Br
OEt
CH2Cl 2, -78 °C 83%
AcO + O
C5H 11
CH2Cl 2, -78 °C 92%
OEt
OTMS
SnCl 4 CH2Cl 2, -78 °C 87%
(42)
AcO
O O
ð43Þ Although little systematic research has been performed on the stereoselectivity of this reaction, some approaches to the use of chiral acetal parts for asymmetric synthesis have been reported. Kishi successfully accomplished the preparation of an optically active synthetic intermediate of aklavinone by reaction of a-stannylketone with a chiral aromatic aldehyde acetal as depicted in Eq. (44) [33]. A similar achiral acetal was also used for synthesis of racemic 4-demethoxydaunomycinone by Rutledge in 1986 (Eq. (45)) [34]. Rutledge’s and Yamamoto’s approaches are noteworthy for the stereoselective synthesis of optically active b-alkoxy carbonyl compounds in SnCl 4 promoted aldol reactions (Eqs. (46) and (47)) [35, 36].
4.2 Tin-promoted Intermolecular Aldol Reactions
OH O
OH
O
O O
OH O
OH O
+ MeCN, -20 °C 83%, ds 10/1
TMS O
OH O
SnCl 4
119
CO2Me
CO2Me
O OH O
OH OH OH
O
CO2Me
Aklavinone
ð44Þ O
OH OMe OMe
O
O OTMS
SnCl 4
O
MeCN, -23 °C 70%
OH OMe O
+
OMe CO2Me
O O
OMe CO2Me
O
OH OH OH
O OH O rac-4-demethoxydaunomycinone
ð45Þ MeO O Ph O OTMS
SnCl 4
O
MeO
MeO
H O
Cl 3Sn
MeCN, -23 °C
MeCN, -23 °C 73%
Ph
O
O MeO 3α/3β=64/36
ð46Þ TMS TMS
OTMS O O
O O
1 + R
R3 R2
O
SnCl 4 TMS
CH2 Cl2 -78, -97 or -125 °C 55~91%
R3
O R1 R2 64~94% ee
ð47Þ
120
4 Tin-promoted Aldol Reactions and their Application to Total Syntheses of Natural Products
Otera discovered that Sn(IV) Lewis acids such as Bu2 Sn(OTf )2 , Bu2 Sn(ClO4 )2 , Bu3 SnClO4 , and (C6 F5 )2 SnBr2 are suitable activators for the aldol reaction of ESE and KSA with aldehydes [37]. Interestingly, it was proved by elaborate research that reactions of ESE with ketones and of KSA with acetals do not proceed under the influence of these catalysts. It was also shown that a,b-unsaturated aldehydes are much more reactive than aromatic and saturated aliphatic aldehydes. They expanded this concept to ‘‘parallel recognition’’, in which some reaction patterns proceed exclusively, affording the desired adducts only, on treatment of several different nucleophiles and electrophiles in one pot. When an ambident electrophile is used in this new strategy ESE and KSA, respectively, react with one of the electrophilic points in the substrate to produce a single adduct in high yield with perfect selectivity (Eqs. (48) and (49)). TMSO t
OMe O
+
+
OTBS
MeO
Bu
TBS
(C 6F5 )2SnBr2
O MeO
O
O
OEt CH Cl , -78 °C t 2 2 Bu 73%
OEt
ð48Þ OTMS
OH O
+
O
Ph
(C 6F5 )2SnBr2
Ph
H OTBS +
O
OEt
CH2Cl 2, -78 °C 58%
CO2Et OTBS
ð49Þ
4.2.4
Reaction of Dienol Silyl Ethers
Siloxyheteroaromatic compounds function as nucleophilic dienol silyl ethers with carbonyl compounds or acetals under the influence of a Lewis acid catalyst. For example, Takei showed that 2-siloxyfurans react with aldehydes and acetals to give the corresponding g-substituted g-lactones in high yields (Eqs. (50) and (51)) [38]. O + R1
OTMS
R2
MeO OMe R1
O
R2
SnCl 4 CH2Cl 2, -78 °C 70~96%
+
O
OTMS
SnCl 4 CH2Cl 2, -78 °C 66~92%
R1 R2
OH
R1 R2
O
O
(50)
OMe O
O
(51)
4.3 Tin-promoted Intramolecular Aldol Reactions
2-Siloxypyrrole has also been used as a suitable nucleophile in the SnCl 4 promoted aldol reaction with aldehydes shown in Eq. (52). Several polyoxy a-amino acids and carbocyclic amines were synthesized by Rassu and Casiraghi using a stereoselective aldol reaction of 2-siloxypyrrole with protected glyceraldehyde in the presence of SnCl 4 [39]. O H
O
Boc N OTBS
+
O
OH Boc N O
SnCl 4 O O
Et 2O, -80 °C 80% >95% ds OH O
HO
NH2
HO OH
OH
NH2
(52) NH2
HO OH
HO
HO
OH
OH
Baldwin successfully used the reaction of functionalized 2-siloxypyrrole with 2-methylpropionaldehyde for synthesis of an intermediate of lactacystin, a natural g-lactam (Eq. (53)) [40]. Ph
Ph O
O H
+
O
SnCl4 N
OTBS
N
HO
Et 2O, -78 °C 61%
O
5
5α/5β=9/1
(53) AcHN O HO2C
S HO
H N
O
OH Lactacystin
4.3
Tin-promoted Intramolecular Aldol Reactions 4.3.1
The Intramolecular Aldol Reaction of Silyl Enolates
Not only intermolecular additions of ESE and KSA to acetals, but intramolecular reactions of acetals with a silyl enolate moiety are also quite
121
122
4 Tin-promoted Aldol Reactions and their Application to Total Syntheses of Natural Products
effective, especially for synthesis of strained cyclic compounds. Kocienski fully studied the intramolecular reaction of ESE to give medium-sized compounds (Eq. (54)), and this method was even found to be applicable to the synthesis of an eight-membered carbocycle (Eq. (55)) [41]. Paquette also succeeded in preparing a bicyclic eight-membered ring compound as shown in Eq. (56) [42]. OSiMe 2Ph O
SnCl 4
(54) O
CH2Cl 2, -78 °C 30%
O
OH
O
cis/trans=50/50 OTMS O
O
SnCl 4
O
HO
O
(55)
CH2Cl 2, -40 °C 35% OSiMe 2Ph
O
SnCl 4 proton sponge
(56) O
CH2Cl 2, -78 °C 69%
O MeO
Tatsuta recently reported a total synthesis of pyralomicin 1c in which SnCl 4 -catalyzed cyclization was effectively employed for formation of a 6membered ring core as shown in Eq. (57) [43].
O
TBS TBS O OMe
PhO2S TBSO
O SnCl 4
PhO2S
OTBS
OMe CH2Cl 2, -78 °C OTBS 71%
OTBS OTBS OH OH
HO
N
(57)
OH O
Cl Cl O
OH
Pyralomicin 1c
4.3 Tin-promoted Intramolecular Aldol Reactions
[1,3] rearrangement of ESE with anomeric carbon was developed by Ley in 1998, and several 6- and 5-membered C-glycosides have been prepared by SnCl 4 acceleration (Eqs. (58) and (59)) [44]. OTMS C6H13
O
R = Ph, C
O
CPh, tBu
CH2Cl 2, -30 °C 79~86%
SnCl 4 O
C6H13
R
OTMS O
OH
SnCl 4
C7H 15
O
R
(58)
O α/β=75/25 O
HO
O
CH2 Cl2 56%
(59)
C7H 15
4.3.2
Reaction of Dienol Silyl Ethers or g-Silyl-a,b-enones
In 1986, Kuwajima established a method for generation of g-stannyl-a,benones as nucleophilic species. It was found that these reactions with acetals proceeded smoothly to afford the corresponding coupling products in good yields (Eq. (60)) [45].
O
O
SnCl 4 CH 2Cl2 , 0 °C
TMS
Cl 3Sn γ-stannylenone
O
OMe
γ-stannylenone O
OMe
(60) O
OMe
CH 2Cl2 , 0 °C 71%
Remarkable results from SnCl 4 -induced aldol cyclization using dienol silyl ethers have been observed in synthetic studies on taxane diterpenoids [46]. In the initial approach for construction of the basic skeleton of a taxane ring using a g-stannyl-a,b-enone generated from a g-silyl-a,b-enone by SiaSn metal exchange, the yield of the desired tricyclic compound was unsatisfactory (Eq. (61)). Cyclization of acetals with a dienol silyl ether moiety promoted by SnCl 4 occurred rapidly, however, to afford the aromatic taxanes in high yields (Eqs. (62) and (63)). Kuwajima recently accomplished the total synthesis of paclitaxel (taxol), using this intermediate as the main component with the eight-membered ring core.
123
124
4 Tin-promoted Aldol Reactions and their Application to Total Syntheses of Natural Products
TMS
O
TIPSO H
OBn OBn
TIPSO HO
SnCl4
OMe
MeO
PhS
OMe
OMe OMe
OH
E/Z=60/40
CH2 Cl2, rt 15~17% [SnCl 4/TiCl 4; -23 °C; 73%]
OMe OMe
OH OMe
(61)
O
OMe
H
MeO
OMe
SnCl4
(62)
CH2Cl 2, -45 °C Z ; 77% E ; 66%
(MeBO)3 pyridine benzene, rt 90%
O H
i) SnCl4 CH2Cl2 -78 to -45 °C
OH OMe
PhS
ii) pinacol DMAP benzene, rt 76% (2 steps)
O HO
OBn
OH
AcO O Ph
NH
O
OH
O
Ph
O
OH
H O O Ac Bz Paclitaxel (Taxol®)
O
HO
ð63Þ
4.4
Chiral Diamine–Sn(II) Complex-promoted Aldol Reactions
Enantioselective aldol addition is one of the most powerful tools for construction of new carbon–carbon bonds with control of the absolute configurations of new chiral centers, and the utility of this reaction has been demonstrated by several applications to the synthesis of natural products such as carbohydrates, macrolide and polyether antibiotics, etc. In the asymmetric aldol reactions reported chiral auxiliary groups are usually attached to the reacting ketone-equivalent molecules. Until the early 1980s there had been no example of an aldol-type reaction in which two achiral carbonyl compounds were used to form a chiral molecule with the aid of a chiral ligand.
4.4 Chiral Diamine–Sn(II) Complex-promoted Aldol Reactions
Chiral auxiliaries derived from (S)-proline seemed to be particularly attractive, because they have conformationally rigid pyrrolidine rings. Chiral diamines derived from (S)-proline, especially, are successfully employed for creation of an efficient chiral environment because almost all the main and transition metals having vacant d orbitals are capable of accepting a bidentate ligand. An intermediate derived from the chiral ligand and an organometallic reagent would have a conformationally restricted cis-fused five-membered ring chelate and would afford optically active organic compounds by reaction with appropriate substrates. 4.4.1
Asymmetric Aldol and Related Reactions of Sn(II) Enolates
Enantioselective aldol reaction via Sn(II) enolates coordinated with chiral diamines was explored by Mukaiyama and Iwasawa in 1982 [10c, 47]. In the presence of chiral diamine 1a, various optically active aldol adducts were produced by reactions between aromatic ketones and aldehydes (Eqs. (64) and (65)). This is the first example of the formation of crossed aldol products in high optical purity, using chiral diamines as chelating agents, starting from two achiral carbonyl compounds.
N
N Me Sn(OTf) 2
O
1a
OSnOTf
N N Me Sn O OTf
Ph
Ph NEt
Ph chiral Sn(II) enolate
CH2 Cl2, -78 °C
O R
OH O
H
-95 °C 57~78%
R * *
Ph
syn/anti=80/20~100/0 75~90% ee (syn)
ð64Þ O Sn(OTf) 2
O Ph
NEt CH2 Cl2, -78 °C
diamine 1a
Ph
H
-95 °C 35%
OH O Ph
Ph 75% ee
(65)
125
126
4 Tin-promoted Aldol Reactions and their Application to Total Syntheses of Natural Products
This procedure is successfully applied to the reactions of carboxylic acid derivatives such as thioamides and thione esters (Eqs. (66) and (67)) [48]. 3-Acetylthiazolidine-2-thiones are quite suitable substrates for the Sn(II) enolate-mediated asymmetric aldol reaction, and various optically active bhydroxy 3-acylthiazolidine-2-thiones are obtained by use of chiral diamine 1a (Eq. (68)) [49]. O LDA / THF
S NMe2
diamine 1a
Ph
OH S
H Ph
Sn(OTf) 2 -78 °C
CH2 Cl2 -20 °C 93%
NMe2
(66)
syn/anti =92/8 85% ee (syn)
O diamine 1a
Sn(OTf) 2
S
Ph
OH S
H Ph
OMe
OMe
(67)
73%
NEt
syn/anti =78/22 90% ee (syn)
CH2Cl 2, -78 °C O S
O N
diamine 1a
Sn(OTf) 2
R
S
-95 °C 63~81%
NEt
S
OH O
H R
N
S
(68)
65~>90% ee
CH2Cl 2, -78 °C
A complex formed from chiral diamine 2a with the Sn(II) enolate of 3acetylthiazolidine-2-thione reacts with some a-keto esters to afford aldol adducts with tertiary hydroxyl groups and high ee, as shown in Eq. (69) [50].
N Me
S
O N
Sn(OTf) 2
N H
S
R
O
NEt
OMe
R CH2Cl 2, -78 °C
S
MeO2C OH O
2a
N
S
(69)
85~>95% ee
O 65~80%
When 3-(2-benzyloxyacetyl)thiazolidine-2-thione is treated under these reaction conditions the corresponding anti-diol groups are produced with
4.4 Chiral Diamine–Sn(II) Complex-promoted Aldol Reactions
good diastereoselectivity and high enantioselectivity by addition of chiral diamine 1a (Eq. (70)) [51]. O S
O BnO
N
Sn(OTf) 2
diamine 1a
S
R
OH O
H R
N S OBn syn/anti =19/81~7/93 87~94% ee (anti )
68~93%
NEt
S
CH2Cl 2, -78 °C
ð70Þ Because Sn(II) enolates of thioesters are generated by the reaction of Sn(II) thiolates with ketenes, the optically active b-hydroxy thioesters are also readily synthesized by way of an aldol reaction with aldehydes in the presence of Sn(OTf )2 and chiral diamine 1a (Eq. (71)) [52]. O O
Sn(StBu)2
Sn(OTf) 2
diamine 1a
CH2Cl2, -78 °C
R
OH O
H
-100 ˚C 55~70%
StBu
R
(71)
58~80% ee
Mukaiyama and Iwasawa also developed an enantioselective Michael Addition reaction using Sn(OTf )2 with chiral diamines [48, 53]. For example, Sn(II) enolate of methyl ethanedithioate reacts with benzalacetone in the presence of chiral diamine 2a and trimethylsilyl trifluoromethanesulfonate (TMSOTf ) to give the corresponding Michael adduct in 82% yield with good enantioselectivity (Eq. (72)). Sn(OTf) 2
S SMe
NEt
diamine 2a
TMSOTf
O
O
SMe * (72) 82%, 70% ee (after hydrolysis)
Ph CH2 Cl2, -78 °C
Ph
S
The Michael adducts were obtained from trimethylsilyl enethioate and a,b-unsaturated ketones in high yields with moderate to good enantioselectivity by use of a catalytic amount of chiral diamine–Sn(OTf )2 complex (Eq. (73)) [48, 54]. As shown in Scheme 4.2, SiaSn metal exchange occurs rapidly to generate chiral Sn(II) enolate and TMSOTf in situ, because the silicon–sulfur bond is rather weak and tin has high affinity for sulfur. Activation of the a,b-unsaturated ketone by TMSOTf would lead to the Michael reaction, affording the silyl enolate of the Michael adduct and regeneration of the chiral diamine–Sn(II) complex. To preclude the competitive
127
128
4 Tin-promoted Aldol Reactions and their Application to Total Syntheses of Natural Products
N NRR' Me Sn TfO OTf
STMS SMe
R2
TMSO
chiral Sn(II) complex
1
R
S SMe
* O R1
R2
N NRR' Me Sn S OTf SMe + TMSOTf Scheme 4.2
Catalytic asymmetric Michael reaction using chiral Sn(II) enolate.
direct reaction of KSA with a,b-unsaturated ketone under the influence of TMSOTf, the concentration of the KSA is kept low by slow addition of a solution of the KSA to the reaction mixture.
O
STMS
diamine 2a (0.11 eq) Sn(OTf) 2 (0.1 eq)
R2
O
S
+ R1
R2
SMe
CH2Cl 2, -78 °C 79~82% (after hydrolysis)
R1
SMe * 40~70% ee
(73)
These chiral enolate preparations and reactions with several electrophiles giving the optically active aldols have been applied to the synthesis of natural compounds such as b-lactam antibiotics. References in reviews by Mukaiyama et al. [10c, 48, 55] describe advanced studies on Sn(II) enolate chemistry. 4.4.2
Chiral Diamine–Sn(II) Complex-promoted Aldol Reactions
Chiral Sn(II) Lewis acids prepared in situ by coordination of chiral pyrrolidine derivatives to Sn(OTf )2 were developed by Mukaiyama and Kobayashi in 1989 to promote the asymmetric aldol reaction of ESE or KSA with carbonyl compounds. Some chiral Lewis acids had already been reported and fruitful results were observed in the field of the Diels–Alder and related reactions, in particular, in the late 1980s. The chiral Lewis acids employed for
4.4 Chiral Diamine–Sn(II) Complex-promoted Aldol Reactions
Sn(OTf) 2 N
N Me
N N Me Sn TfO OTf
CH2 Cl2, rt 1a
chiral Sn(II) complex 1a-Sn Sn(OTf) 2
N H
N Me
N N Me Sn H TfO OTf
CH2 Cl2, rt
2a
chiral Sn(II) complex 2a-Sn
Scheme 4.3
Chiral Sn(II) Lewis acids generated from Sn(OTf )2 with diamines.
these reactions were rather strong and hard acidic metals such as aluminum and titanium. Chiral Sn(II) Lewis acids prepared in situ by chelation of a chiral diamine to Sn(OTf )2 , might, on the other hand, be effective because Sn(II) is a soft metal and the complex has one vacant d orbital to be coordinated with oxygen in the carbonyl group of an aldehyde without losing the favorable asymmetric environment (Scheme 4.3). On this basis a variety of efficient asymmetric aldol reactions between achiral silyl enolates and achiral carbonyl compounds have been developed. Some chiral diamines used in the asymmetric aldol reaction of KSA with carbonyl compounds promoted by Sn(OTf )2 are listed in Scheme 4.4. 4.4.3
Asymmetric Aldol Reaction of Silyl Enolates
Asymmetric aldol reaction of a KSA derived from S-Et ethanethioate with aldehydes achieves high ee by employing a chiral promoter, the combined use of Sn(OTf )2 coordinated with the chiral diamine (1a or 2a), and tributyltin fluoride (Eq. (74)) [56]. diamine 1a or 2a Sn(OTf) 2 OTMS
O R
OH O
+ H
SEt
Bu3SnF CH2Cl 2, -78 °C 50~90%
R
SEt
(74)
78~>98% ee
The complex consisting of Sn(OTf )2 with 2a is quite effective for reaction of KSA generated from S-Et propanethioate with aldehydes to afford the corresponding syn aldol adducts with excellent diastereoselectivity and enantioselectivity (Eq. (75)) [56b, 57]. A highly enantioselective aldol reac-
129
130
4 Tin-promoted Aldol Reactions and their Application to Total Syntheses of Natural Products
N
N Me
N H
N Me 1a
2a N
N Et 1b
N Me 3a
N
N 6
N
N Et
1d
N
5 N
N Me
1c
N Pent
N Me
2b N
N
4
N H
N Me
N Pr
N Pr
N Me
N 7
3b
Scheme 4.4
Useful chiral diamines for asymmetric aldol reaction.
tion of the KSA of benzyl acetate with achiral aldehydes can be conducted using the chiral promoter formed from Sn(OTf )2 with 1b (Eq. (76)) [58].
OTMS
O + R
H
O + R
H
SEt
OTBS OBn
diamine 2a Sn(OTf) 2 Bu3 SnF [Bu 2Sn(OAc)2 ] CH2Cl 2, -78 °C 48~91% [70~96%]
OH O R
(75) syn/anti =>99/1 >98% ee (syn)
diamine 1b Sn(OTf) 2 Bu3SnF mesitylene CH2Cl 2, -95 °C 51~79%
SEt
OH O R
OBn
(76)
89~>98% ee
In the presence of a promoter including the chiral diamine 1d, the KSA of a thioester reacts with a-ketoesters to afford the corresponding aldol-type adducts, 2-substituted malates, in good yields with excellent ee (Eq. (77)) [59].
4.4 Chiral Diamine–Sn(II) Complex-promoted Aldol Reactions
O
OTMS
diamine 1d Sn(OTf) 2
MeO 2C OH O
+ R
CO2Me
SEt
R = Me, iPr, Ph
R SEt 92~>98% ee
Bu3SnF CH2Cl 2, -78 °C 74~81%
(77)
In the course of developments in asymmetric synthesis using Sn(OTf )2 it has also been revealed that a tetrahydrothiophene ligand, an analog of the chiral diamine, also affords an asymmetric environment around the Sn(II) metal suitable for promoting the enantioselective aldol reaction giving the desired adducts with high selectivity (Eq. (78)) [60].
S OTMS
O + R
H
SEt
N H OH O
Sn(OTf) 2 Bu 2Sn(OAc)2 CH2Cl 2, -78 °C 48~98%
R
(78) SEt
syn/anti =86/14~100/0 63~93% ee (syn)
4.4.4
Catalytic Asymmetric Aldol Reaction
Catalytic asymmetric synthesis is an extremely desirable method for producing optically active compounds from achiral substrates. If asymmetric amplification could be realized by employing a catalytic amount of a chiral source, substantial amounts of optically active compounds could be synthesized in a convenient and rational way. The promoter, consisting of a chiral diamine and Sn(OTf )2 , has mild acidity which accelerates the asymmetric aldol reaction of KSA with aldehydes; these reactions always required a stoichiometric amount of the chiral diamines, however. From experimental examination of the mechanism of the stoichiometric asymmetric aldol reaction, Mukaiyama and Kobayashi considered the possibility of catalytic use of the chiral diamine–Sn(OTf )2 complex. Their hypothesis was:
. the reaction first produces Sn(II) alkoxides and TMSOTf (Scheme 4.5); . if the substrates (KSA and aldehyde) are added quickly to a solution of .
the chiral diamine–Sn(OTf )2 complex, the initially formed TMSOTf promotes the achiral asymmetric process to produce the racemic aldol from the remaining substrates; and if the substrates are added slowly to a solution of the chiral diamine– Sn(OTf )2 complex, in accordance with the reaction rate of KSA with aldehyde, transmetalation from Sn(II) on the formed Sn(II) alkoxide to Si would occur by sequential reaction with TMSOTf in situ.
131
4 Tin-promoted Aldol Reactions and their Application to Total Syntheses of Natural Products
132
O R
N NRR' Me Sn TfO OTf
H +
TMSO
chiral Sn(II) complex
R
OTMS
O SEt
SEt
N NRR' Me Sn TfO O O R
SEt
+ TMSOTf Scheme 4.5
Catalytic asymmetric aldol reaction using chiral Sn(II) complex.
Actually, an optically active trimethylsilyl ether of the aldol was obtained by the reaction of KSA derived from S-Et propanethioate with aldehydes by slow addition of a mixture of substrates to a solution including a catalytic amount of the chiral diamine–Sn(OTf )2 complex (Eq. (79)) [61].
OTMS
O + R
H
SEt
diamine 2a or 2b (0.22 eq) Sn(OTf) 2 (0.2 eq)
OH O
R SEt CH2Cl 2, -78 °C 64~86% syn/anti =93/7~100/0 (after hydrolysis) 91~>98% ee (syn)
(79)
The rate of this transmetalation is affected by the conditions, particularly the solvent. Propionitrile was found to be a suitable reaction medium for the catalytic process, and a variety of the optically active aldol adducts were prepared with high ee when a solution of aldehydes and KSA derived from S-Et propane- or ethanethioate was added to the catalyst consisting of a chiral diamine and Sn(OTf )2 in propionitrile (Eqs. (80) and (81)) [61, 62].
OTMS
O + R
H
SEt
diamine 2a (0.11~0.22 eq) Sn(OTf) 2 (0.1~0.2 eq)
OH O R
(80) SEt
EtCN, -78 °C 65~80% syn/anti = 89/11~100/0 (after hydrolysis) 89~>98% ee (syn)
4.4 Chiral Diamine–Sn(II) Complex-promoted Aldol Reactions
O
OTMS
diamine 2a or 2b (0.22 eq) Sn(OTf) 2 (0.2 eq)
OH O
(81)
+ R
H
SEt
EtCN, -78 °C 48~90% (after hydrolysis)
R
SEt 68~93% ee
A novel combined catalyst generated from SnO and TMSOTf was also developed for catalytic synthesis of the desired compounds, as shown in Eq. (82) [63]. Although the exact structure of the complex is unclear, SnO interacted with TMSOTf and formed an acidic species which functions as a chiral catalyst in this reaction. Kobayashi employed SnO as an effective additive for aldol reaction of KSA with aldehydes, promoted by the chiral diamine–Sn(OTf )2 complex, that is, the optically active aldol adducts were synthesized with high stereoselectivity by using a new combination, a chiral diamine–Sn(OTf )2 aSnO (Eq. (83)) [64].
OTMS
O R
+
+ H
SEt R' R' = H, Me
OH O
R SEt CH2Cl 2, -78 °C 58~82% syn/anti = 91/9~98/2 (after hydrolysis) 67~94% ee (syn)
diamine 2a (0.22 eq) Sn(OTf) 2 (0.2 eq) OTMS SnO (0.2~0.4 eq)
O R
SEt
H
diamine 2a (0.5 eq) SnO (1.0 eq) TMSOTf (0.65 eq)
(82)
OH O
R SEt EtCN, -78 °C R' 50~85% syn/anti = 95/5~100/0 (after hydrolysis) 84~>98% ee (syn)
(83)
Evans recently designed an original chiral Sn(II) catalyst generated from bis(oxazoline) and Sn(OTf )2 [65]. Bis(oxazoline) functions as a bidentate ligand to Sn(OTf )2 and the complex formed might have a rigid C2 -symmetric structure creating an excellent asymmetric environment. This asymmetric aldol reaction proceeds with high diastereoselectivity and enantioselectivity to give the corresponding adducts when bis-functionalized electrophiles such as alkyl glyoxylates, a-ketoesters, and a-diketones are used, because of the formation of suitable complexes with bis(oxazoline) and Sn(OTf )2 . For example, the desired optically active anti aldols were obtained by reaction of KSA derived from thiol esters with ethyl glyoxylate using a catalytic amount
133
134
4 Tin-promoted Aldol Reactions and their Application to Total Syntheses of Natural Products
of the Bn/Box–Sn(II) complex. Anti-(2R,3S) selectivity is also observed in the construction of b-hydroxy-a,b-dimethyl thioesters by aldol addition of the KSA of S-Et propanethioate to an a-ketoester in the presence of a Bn/ Box–Sn(II) complex. A distinctive feature of this asymmetric aldol reaction is that an anti-(2S,3R) adduct, corresponding to the optical antipode of the above anti-(2R,3S) adduct, was produced on use of a Ph/PyBox–Sn(II) complex with the same chirality at the C4 position in the oxazoline moiety of Bn/Box (Eqs. (84) and (85)).
O
O N
N
Sn Bn TfO OTf Bn O R3O
OTMS 2
R
+
SR R1
O
OTMS
MeO
+
N
Ph
N Sn N TfO OTf
O
Ph
(85)
OH O
(0.1 eq) MeO
SR CH2Cl 2, -78 °C 81~94% (after hydrolysis)
R1
O
(84)
R3O
SR CH2Cl 2, -78 °C O R1 72~90% syn/anti =10/90~4/96 (after hydrolysis) 92~98% ee (anti )
O
O
HO R2 O
(0.1 eq)
SR O
R1
syn/anti =5/95~1/99 92~99% ee (anti )
KSA prepared from acetic acid and a,a-dialkyl-substituted acetic acid derivatives also reacted with ethyl glyoxylate to produced the desired aldol adducts with high enantioselectivity, as shown in Eqs. (86) and (87) [65, 66].
O
Bn O EtO
OTMS H
O
+
O N N Sn TfO OTf Bn (0.1 eq)
SPh CH2Cl 2, -78 °C 90% (after hydrolysis)
(86)
OH O EtO
SPh O 98% ee
4.4 Chiral Diamine–Sn(II) Complex-promoted Aldol Reactions
O
O N
Bn O EtO
OTMS +
H
N Sn TfO OTf Bn (0.1 eq)
OH O EtO
SEt
SEt CH2Cl 2, -78 °C 89% (after hydrolysis)
O
(87)
O 95% ee
4.4.5
Asymmetric Synthesis of syn- and anti-1,2-Diol Groups
Optically active 1,2-diol groups are often observed in nature as carbohydrates, macrolides, or polyethers, etc. Several excellent asymmetric dihydroxylation reactions of olefins using osmium tetroxide with chiral ligands have been developed to give the optically active 1,2-diol groups with high enantioselectivity. Some problems remain, however, for example, preparation of the optically active anti-1,2-diols, etc. The asymmetric aldol reaction of a KSA derived from an a-benzyloxy thioester with aldehydes has been developed by Mukaiyama et al. to introduce two hydroxyl groups simultaneously with stereoselective carbon–carbon bond-formation using the chiral Sn(II) Lewis acid. First, a variety of optically active anti-a,b-dihydroxy thioester derivatives were obtained in good yield with excellent diastereoselectivity and enantioselectivity when the chiral diamine 1a or 1b, Sn(OTf )2 , and dibutyltin diacetate were employed together (Eq. (88)) [67]. By means of current aldol methodology, two hydroxyl groups can be stereoselectively introduced at the 1,2-position during formation of the new carbon–carbon bond.
OTMS
O + R
H
diamine 1a or 1b Sn(OTf) 2
SEt OBn
OH O R
Bu 2Sn(OAc)2 CH2Cl 2, -78 °C 59~88%
SEt OBn
(88)
syn/anti = 2/98~1/99 95~98% ee (anti )
On the other hand, several syn-aldol adducts are obtained under the same reaction conditions, i.e. in the presence of chiral diamine 1a, Sn(OTf )2 , and dibutyltin diacetate. The reaction of a KSA with a t-butyldimethylsiloxy group at the 2-position with achiral aldehydes smoothly proceeds to give the corresponding syn-a,b-dihydroxy thioester derivatives in high yield with good stereoselectivity. When a chiral diamine 1c, which is similar to 1a in possessing a propyl group on the nitrogen of the pyrrolidine ring, is used
135
136
4 Tin-promoted Aldol Reactions and their Application to Total Syntheses of Natural Products
the ee increases up to 94% (Eq. (89)) [68, 67b]. Now it becomes possible to control the enantiofacial selectivity of the KSA derived from a-hydroxy thioester derivatives just by choosing the appropriate protective groups of the hydroxy parts of the KSA, and the two diastereomers of the optically active a,b-dihydroxy thioesters can be synthesized. OTMS
O + R
H
SEt OTBS
diamine 1c Sn(OTf) 2
OH O R
Bu 2Sn(OAc)2 CH2Cl 2, -78 °C 46~93%
SEt OTBS
(89)
syn/anti = 88/12~97/3 82~94% ee (syn)
Kobayashi also introduced several new types of chiral diamine, for example 4 and 5, to obtain rather higher selectivity for the synthesis of syn-a,bdihydroxy thioester derivatives, as shown in Eq. (90) [69, 70]. OTMS
O + R
H
SEt OTBS
diamine 4 or 5 Sn(OTf) 2
OH O R
Bu 2Sn(OAc)2 CH2Cl 2, -78 °C 4; 69~89% 5; 61~86%
SEt OTBS
(90)
4; syn/anti = 94/6~99/1 86~96% ee (syn) 5; syn/anti = 98/2~>99/1 96~99% ee (syn)
Diastereoselective and enantioselective synthesis of both stereoisomers of a,b-dihydroxy-b-methyl thioester derivatives has also been achieved by reaction of KSA with a benzyloxy or t-butyldimethylsiloxy group at the 2position, promoted by an Sn(II) Lewis acid including chiral diamine 1c or 4 (Eqs. (91) and (92)) [69, 71].
OTMS
O + R
CO2Me
R = Me, Ph
OTMS +
R
CO2Me
R = Me, Ph
SEt OTBS
MeO 2C OH O R
SEt OBn
O
diamine 1c Sn(OTf) 2 Bu3SnF CH2Cl 2, -78 °C 66~93%
diamine 4 Sn(OTf) 2
(91)
syn/anti =13/87~7/93 91% ee (anti)
MeO 2C OH O R
Bu3SnF CH2Cl 2, -78 °C 76~89%
SEt OBn
SEt OTBS syn/anti = 84/16~94/6 87~88% ee (syn)
(92)
4.4 Chiral Diamine–Sn(II) Complex-promoted Aldol Reactions
KSA derived from phenyl esters have a unique capacity to promote remarkable stereoselectivity in asymmetric aldol reactions involving a chiral diamine–Sn(II) complex [72–74]. For instance, Kobayashi found that (E)KSA derived from p-methoxyphenyl (t-butyldimethylsiloxy)acetates reacts with aldehydes to afford the corresponding anti-1,2-diol derivatives with high diastereoselectivity and enantioselectivity when promoted by an Sn(II) Lewis acid complexed with chiral diamine 1a (Eq. (93)) [74].
OTMS
O + R
H
OPMP OTBS
diamine 1a Sn(OTf) 2
OH O R
Bu 2Sn(OAc)2 CH2Cl 2, -78 °C 31~95%
OPMP OTBS
(93)
syn/anti = 31/69~2/98 84~95% ee (anti )
Reaction of (Z)-KSA derived from phenyl benzyloxyacetate with aldehydes, using chiral diamine 3b, also affords the optically active anti-1,2aldols preferentially (Eq. (94)). However, the corresponding syn aldols were formed when the reaction was conducted in the presence of chiral diamine 6 (Eq. (95)) [75]. The latter reaction also proceeded when accelerated by a catalytic amount of chiral diamine 2a or 2b under Kobayashi conditions (Eq. (96)) [76].
O
OTMS +
R
H
+ H
BnO
OPh
OTMS
O R
OPh
OTMS
O R
BnO
+ H
BnO
OPh
diamine 3b Sn(OTf) 2
OH O R
Bu 2Sn(OAc)2 CH2Cl 2, -78 °C 51~80%
OPh OBn syn/anti =12/88~7/93 90~94% ee (anti )
diamine 6 Sn(OTf) 2
OH O R
Bu 2Sn(OAc)2 CH2Cl 2, -78 °C 85~90%
diamine 2a or 2b (0.2 eq) Sn(OTf) 2 (0.2 eq)
(94)
OPh
(95)
OBn syn/anti =94/6~>99/1 91~98% ee (syn)
OH
O
R OPh SnO (0.2 eq) OBn EtCN, -78 °C syn/anti =90/10~>98/2 68~87% 80~96% ee (syn) (after hydrolysis)
(96)
137
138
4 Tin-promoted Aldol Reactions and their Application to Total Syntheses of Natural Products
This method of producing chiral aldols is also applicable to the construction of an asymmetric quarternary carbon included in the 1,2-diol groups. In the presence of a chiral promoter consisting of the chiral diamine 1a, Sn(OTf )2 , and dibutyltin diacetate, optically active anti-a,b-dihydroxy-amethyl thioester and phenyl ester derivatives were synthesized in good yields with high stereoselectivity (Eqs. (97) and (98)) [72, 73].
OTMS
O + Ph
H
E/Z =12/88
OTMS +
Ar
H
OH O
SEt OBn
O
diamine 1a Sn(OTf) 2 Ph Bu 2Sn(OAc)2 CH2Cl 2, -78 °C 58% diamine 1a Sn(OTf) 2
OH O Ar
Bu 2Sn(OAc)2 CH2Cl 2, -78 °C 44~72%
(97)
syn/anti = 2/98 97% ee (anti )
OPh OBn E/Z =58/42
SEt OBn
OPh OBn
(98)
syn/anti = 26/74~8/92 73~95% ee (anti)
Another interesting phenomenon in which the corresponding syn-a,bdihydroxy-a-methyl ester derivatives were produced from similar KSA using a stoichiometric or catalytic amount of the chiral catalyst containing diamine 2a as shown in Eqs. (99) and (100) [73].
OTMS
O + R
H
OR OBn
R = Et, iPr, Ph E/Z =58/42~71/29
OTMS
O Ph
+ H
diamine 2a Sn(OTf) 2 Bu 2Sn(OAc)2 CH2Cl 2, -78 °C 52%~quant.
R OR BnO syn/anti = 81/19~98/2 80~97% ee (syn)
diamine 2a (0.24 eq) Sn(OTf) 2 (0.2 eq)
Oi Pr OBn E/Z =71/29
OH O
EtCN, -78 °C 60% (after hydrolysis)
(99)
OH O Ph BnO
Oi Pr
(100)
syn/anti = 90/10 96% ee (syn)
Similarly, it was found that KSA (E=Z ¼ 38 to 62) derived from p-methoxyphenyl a-benzyloxypropionate reacted with aldehydes in the presence of a Sn(II) catalyst containing diamine 3a to give the corresponding anti-aldol groups (Eq. (101)), whereas asymmetric aldol reaction of (E)-KSA, derived from p-methoxyphenyl a-benzyloxypropionate with a variety of aldehydes,
4.4 Chiral Diamine–Sn(II) Complex-promoted Aldol Reactions
promoted by Sn(OTf )2 coordinated by chiral diamine 2a, afforded the stereoisomeric syn compounds with high ee (Eq. (102)) [77]. Tetrasubstituted KSA with an alkylthio group also reacted with aldehydes to produce the syn-aldol compounds preferentially [78]; these were used as synthetic intermediates of anti-b-hydroxy-a-methyl groups in the total synthesis of octalactins, described in a later section (Eq. (103)).
OTMS
O + R
H
BnO
OPMP
E/Z=38/62
O
OTMS +
R
H
OPMP OBn
OTMS
O + R
H
MeS
OEt
E/Z=12/88
diamine 3a Sn(OTf) 2
OH O R
Bu 2Sn(OAc)2 CH2Cl 2, -78 °C 53~69%
diamine 2a Sn(OTf) 2
OPMP OBn syn/anti = 6/94~3/97 88~92% ee (anti )
OH O
R OPMP Bu 2Sn(OAc)2 BnO CH2Cl 2, -78 °C syn/anti = 93/7~>99/1 64~79% 95~97% ee (syn) diamine 2a Sn(OTf) 2 Bu 2Sn(OAc)2 [Bu3SnF] CH2Cl 2, -78 °C 52~87%
(101)
(102)
OH O R MeS
OEt
(103)
syn/anti = 91/9~99/1 90~95% ee (syn)
4.4.6
Enantioselective Synthesis of Both Enantiomers of Aldols Using Similar Diamines Derived from L-Proline
Kobayashi recently reported remarkable results in the synthesis of optically active aldol compounds using new chiral diamine–Sn(II) complexes as promoters. Reaction of KSA derived from S-Et (t-butyldimethylsiloxy)ethanethioate with aldehydes using chiral diamine 6 mainly yielded the syn-(2R,3S) compounds which are optical antipodes of aldol adducts (syn(2S,3R)) prepared by the reaction using chiral diamine 1c (Eqs. (89) and (104)) [70, 79]. Optically active syn-(2R,3R) aldols were also prepared from propionic acid derivatives and promotion with an Sn(II) complex with chiral diamine 7, whereas syn-(2S,3S) aldols were produced if chiral diamine 2a was used in the same reaction (Eqs. (75) and (105)) [80]. Chiral diamines 1c, 2a, 6, and 7 were all prepared starting from l-proline and have identical chirality at the C2 position. Artificial switching of the enantiofacial selectiv-
139
140
4 Tin-promoted Aldol Reactions and their Application to Total Syntheses of Natural Products
ity of the aldol reaction by using only one chiral source could therefore be achieved by use of these methods.
OTMS
O + R
H
SEt OTBS
OTMS
O + R
H
SEt
diamine 6 Sn(OTf) 2
OH O R
Bu 2Sn(OAc)2 CH2Cl 2, -78 °C 63~86%
(104)
syn/anti =>99/1 98~>99% ee (syn)
diamine 7 Sn(OTf) 2 Bu 2Sn(OAc)2 CH2Cl 2, -78 °C 67~83%
SEt OTBS
OH O R
SEt
(105)
syn/anti =>99/1 80~92% ee (syn)
4.5
Asymmetric Total Syntheses of Complex Molecules Using Chiral Diamine–Sn(II) Catalysts
Enantioselective aldol reactions can be powerful tools for the stereoselective synthesis of complex molecules, especially for construction of optically active 1,2-diol groups in the carbon backbones of the target compounds. Recent progress in this area will be illustrated by means of successful methods for stereoselective synthesis of natural and unnatural polyoxy compounds. 4.5.1
Monosaccharides
In the last decade chemical synthesis of monosaccharides has made a great advance as a result of stereoselective addition reactions of 2,3-Oisopropylidene-d- or -l-glyceraldehyde or 4-O-benzyl-2,3-O-isopropylidene-lthreose with enolate components or allyl nucleophiles, and many examples of the effective synthesis of sugars, both natural and unnatural, have been demonstrated [81]. In these syntheses one of the starting materials, glyceraldehyde or a threose derivative, is prepared from a natural chiral pool, mannitol and tartaric acid, respectively. In contrast, a general method has been developed for synthesis of a variety of sugars starting from both achiral KSA and a,b-unsaturated aldehydes (Scheme 4.6). Chiral induction can be accomplished by means of an asymmetric aldol reaction using a complex consisting of Sn(OTf )2 and an appropriate chiral diamine. Subsequent dihydroxylation or epoxidation of the double bond in the aldol adducts affords several tetrahydroxy thioester derivatives which can be useful precursors for the syntheses of a variety of monosaccharides, including rare sugars.
4.5 Asymmetric Total Syntheses of Complex Molecules Using Chiral Diamine–Sn(II) Catalysts
R2
OSiMe 3
O
R1
H
+
R3
N N R Sn TfO OTf
SEt
R2 R1
OP
R2
OH O or
SEt OTBS
R3
2,3-syn
R1
HO R2 OH O
SEt R3
HO R2 OH O 2,3-anti
R1
HO R2 OH O H R1
R1
HO R2 OH O
H R1 H HO R3 OTBS HO R3 OTBS
HO R2 OH O H
OBn
2,3-anti
HO R2 OH O
H R1 H HO R3 OTBS HO R3 OTBS
OH O
R1
2,3-syn HO R2 OH O
141
R1
HO R2 OH O H R1
H
HO R3 OBn
HO R3 OBn
HO R3 OBn
HO R3 OBn
4,5-syn-3,4-anti
4,5-anti-3,4-anti
4,5-anti-3,4-syn
4,5-syn-3,4-syn
Scheme 4.6
Synthesis of monosaccharides by use of the asymmetric aldol reaction.
One example, synthesis of 6-deoxy-l-talose, is shown in Scheme 4.7 [82]. The asymmetric aldol reaction between crotonaldehyde and the KSA of a-benzyloxy thioester was carried out in the presence of Sn(OTf )2 , chiral diamine 1a, and dibutyltin diacetate, and the corresponding aldol adduct was obtained in 85% yield with >97% enantiomeric excess. Dihydroxylation of this chiral synthon, subsequent reduction of the resulted lactone, and deprotection of the benzyl group gave the desired 6-deoxy-l-talose in good yield.
OSiMe 3
O H
+
N N Me Sn TfO OTf
OH O
SEt OBn
SEt Bu 2Sn(OAc)2 CH2Cl 2, -78 °C 85%
OBn syn/anti=2/>98 >97%ee (anti ) O HO
OH OH
OH 6-Deoxy- L-talose Scheme 4.7
Synthesis of 6-deoxy-l-talose.
4 Tin-promoted Aldol Reactions and their Application to Total Syntheses of Natural Products
142
O
OH
4-C-Methy-D-ribose H
O
HO
OBn
R
OH
O
HO
OH
SEt
OH
HO
HO
OH O
D-Ribose
R = H, Me HO
OH O
OH
OH
H
O
OH
SEt OBn
HO NHAc N-Acetyl-L -fucosamine
AcHN
H
HO
O
AcHN OH 3-Acetamido-3,6-dideoxy-L -idose
OH OH
5-Acetamido-5,6-dideoxy-D-allose Scheme 4.8
Synthesis of d-ribose, 4-C-methyl-d-ribose and several amino sugars.
By use of this universal methodology, several monosaccharides including branched and amino sugars were synthesized as shown in Scheme 4.8 (d-ribose and 4-C-methyl-d-ribose (1990) [82], N-acetyl-l-fucosamine, 3acetamide-3,6-dideoxy-l-idose and 5-acetamide-5,6-dideoxy-d-allose (1993) [83]). Scheme 4.9 shows the syntheses of two stereoisomers of 6-deoxy-l-talose from the corresponding intermediates generated via asymmetric aldol reaction (6-deoxy-d-allose (1992) [84] and l-fucose (1993) [76]). Several 2-branched saccharine acid g-lactones, 2-C-methyl-d- or l-threono1,4-lactones and 2-C-methyl-d-erythrono-1,4-lactone have been effectively prepared using this strategy, by enantioselective construction of asymmetric quaternary carbons developed in the former section (Schemes 4.10 and 4.11) [72, 73, 69]. Because the key asymmetric aldol reaction has wide flexibility in controlling newly created chiral centers, these methods are expected to provide useful routes to the synthesis of a variety of monosaccharides from achiral KSA and aldehydes. 4.5.2
Leinamycin and a Part of Rapamycin
Fukuyama used the asymmetric formation of a 1,2-diol group for the total synthesis of leinamycin in which it was shown that KSA with a p-methoxybenzyloxy group at the C2 position functions as a suitable nucleophile for the multifunctional aldehyde (Scheme 4.12) [85]. White also reported that
4.5 Asymmetric Total Syntheses of Complex Molecules Using Chiral Diamine–Sn(II) Catalysts
N N Me Sn TfO OTf
OTMS
O +
H
SEt OBn
Bu 2Sn(OAc)2 CH2Cl 2, -78 °C 82%
143
OH O SEt OBn syn/anti=6/94 92% ee (anti) O
OH
HO
OH OH
6-Deoxy-D-allose
N N Me Sn H TfO OTf OTMS
O
BnO
+ H
OH O
(0.2 eq)
OPh
OPh SnO (0.2 eq) EtCN, -78 °C 87% (after hydrolysis)
OBn syn/anti=97/3 92% ee (syn) O
OH
HO
OH OH L-Fucose
Scheme 4.9
Synthesis of 6-deoxy-d-allose and l-fucose.
OTMS
O TIPSO
+ H
N N Me Sn H TfO OTf
O iPr OBn E/Z=71/29
Bu 2Sn(OAc)2 CH2Cl 2, -78 °C 45%
OH O TIPSO
OiPr BnO
syn/anti=91/9 90% ee (syn) O
O
OH HO 2-C-Methyl- D-threono-1,4-lactone Scheme 4.10
Synthesis of 2-C-methyl-d-threono-1,4-lactone.
144
4 Tin-promoted Aldol Reactions and their Application to Total Syntheses of Natural Products
N N Pr Sn TfO OTf
OTMS
O + CO 2Me
MeO2C OH O
SEt
SEt Bu3SnF CH2Cl 2, -78 °C 93%
OBn
OBn syn/anti=13/87 91% ee (anti ) O
O
HO OH 2-C-Methyl-L -threono-1,4-lactone
N N Pr Sn TfO OTf
OTMS
O + CO 2Me
SEt OTBS
MeO2C OH O SEt OTBS syn/anti=94/6 88% ee (syn)
Bu3SnF CH2Cl 2, -78 °C 89%
O HO
O
OH
2-C-Methyl-D-erythrono-1,4-lactone Scheme 4.11
Synthesis of 2-C-methyl-l-threono- and d-erythrono-1,4-lactones.
tBu
O
O
O
OTMS
H +
O O O
OMe O
N N Me Sn TfO OTf
SEt OPMB
Bu 2Sn(OAc)2 CH2Cl 2, -78 °C 92%
tBu
O
OH O
O
SEt OPMB
O O
OMe
O
O HO
H O O S
H N
S O O
Leinamycin Scheme 4.12
Synthesis of leinamycin.
O
N S
4.5 Asymmetric Total Syntheses of Complex Molecules Using Chiral Diamine–Sn(II) Catalysts
OTMS
OH O N N Me Sn TfO OTf
SEt O
O
SEt O
+
H
Bu 2Sn(OAc)2 CH2Cl 2, -78 °C 80%
OMe OMe
OMe OMe syn/anti =5/95 92% ee (anti )
OTMS
OTBS N N Me Sn TfO OTf
SEt OTBS
O
O H
OH O SEt O
+ Bu 2Sn(OAc)2 CH2Cl 2, -78 °C 80%
OMe OMe
HO O N
OMe OMe syn/anti =8/92 H
O O MeO
O MeO HO
H
O OH O O OMe Rapamycin
Scheme 4.13
Synthesis of a part of rapamycin.
reaction of the KSA generated from S-Et (3,4-dimethoxybenzyloxy)ethanethioate with a,b-unsaturated aldehydes proceeded smoothly to afford the corresponding diol groups in high yields with excellent stereoselectivity, as shown in Scheme 4.13 [86]. 4.5.3
Sphingosine, Sphingofungins, and Khafrefungin
Kobayashi used asymmetric reactions for stereoselective synthesis of a variety of polyoxygenated natural compounds. Initially, a new method for the preparation of sphingosine was developed using the catalytic asymmetric aldol reaction of KSA with a,b-eynal as a key step (Scheme 4.14) [87].
145
146
4 Tin-promoted Aldol Reactions and their Application to Total Syntheses of Natural Products
N N Me Sn H TfO OTf O H
+
BnO
OPh
TMS
OH O
(0.2 eq)
OTMS
OPh SnO (0.2 eq) TMS OBn EtCN, -78 °C syn/anti =97/3 87% 91% ee (syn) (after hydrolysis) OH C13H 27
OH NH2
Sphingosine Scheme 4.14
Synthesis of sphingosine.
Sphingofungins B and F were also totally synthesized from small molecules by the asymmetric aldol strategy as shown in Scheme 4.15 [87b, 88]. Here the optically active polyol part was obtained by reaction of trisubstituted KSA using a chiral diamine ent-2a, and the sole asymmetric center in the side chain was synthesized by the reaction of KSA derived from an acetic acid derivative using the chiral diamine 2a. These segments were coupled to form the basic skeleton of sphingofungins in the total synthesis. A diastereoselective aldol reaction using an a-alkoxyaldehyde was also mentioned in this research (Eq. (106)) [88c]. TBSO
O
C13H 27
OTMS H
+
OBn
SEt TBSO
SnCl 4 C13H 27 CH2Cl 2, -78 ˚C 82% ds 100/0
ð106Þ
OH O SEt OBn
Total synthesis of khafrefungin and the determination of its stereochemistry was recently achieved by Kobayashi, who used chiral induction technology to give the optically active aldol compounds (Scheme 4.16) [89]. The asymmetric aldol reaction of KSA derived from S-Et propanethioate with aldehydes was applied not only to the first step to afford the corresponding thioester with high ee but also to the following stage to give the multifunctional linear thioester with excellent diastereoselectivity.
4.5 Asymmetric Total Syntheses of Complex Molecules Using Chiral Diamine–Sn(II) Catalysts
N N Me Sn H TfO OTf O H
+
BnO
OPh
TMS
OH O
(0.2 eq)
OTMS
OPh SnO (0.2 eq) TMS OBn CH 3CN, -78 °C syn/anti =97/3 87% 91% ee (syn) (after hydrolysis)
N N Me Sn H TfO OTf C6H 13CHO
+
(0.2 eq)
OTMS SEt
OH O
SnO (0.2 eq) CH2Cl 2, -78 °C 87% (after hydrolysis)
HO C6H 13
C6H 13
SEt
94% ee
OH OH O (CH2)6
OH HO
NH2
Sphingofungin B O C6H 13
OH OH O (CH2)6 HO
OH NH2
Sphingofungin F Scheme 4.15
Synthesis of sphingofungins B and F.
4.5.4
Febrifugine and Isofebrifugine
Kobayashi also reported the enantioselective total synthesis of febrifugine and isofebrifugine using the Sn(II)-mediated catalytic asymmetric aldol reaction giving the optically active diol groups (Scheme 4.17) [90]. The correct absolute stereochemistries of natural febrifugine and isofebrifugine were shown by comparison with spectral data and the sense of the optical rotations of four synthetic samples, including enantiomorphs.
147
148
4 Tin-promoted Aldol Reactions and their Application to Total Syntheses of Natural Products
N N Me Sn H TfO OTf OTMS C9H 19CHO
+
SEt
OPMB
O
C10H 21
H
OH O
(0.2 eq) SnO (0.2 eq) CH2Cl 2, -78 °C 83% (after hydrolysis)
C9H 19
SEt
syn/anti =97/3 94% ee (syn)
N N Me Sn H TfO OTf
OPMB
OH O
C10H 21 OTMS +
SEt
SEt
Bu 2Sn(OAc)2 CH2Cl 2, -78 °C 90% >98% ds OH
O
C10H 21
OH OH
O
OH
O OH O Khafrefungin
Scheme 4.16
Synthesis of khafrefungin.
4.5.5
Altohyrtin C (Spongistatin 2) and Phorboxazole B
Asymmetric aldol reaction accelerated by the chiral bis(oxazoline)– Sn(OTf )2 complex also provides a powerful means of construction of polyfunctionalized natural compounds. Evans succeeded in the total synthesis of altohyrtin C (spongistatin 2), a macrocyclic compound with many oxygenated functional groups (Scheme 4.18) [91]. Part of the tetrahydropyran segment (F ring) in altohyrtin C was stereoselectively obtained from the corresponding anti-b-hydroxy-a-methyl thioester generated by the asymmetric aldol reaction using the Ph/Box–Sn(II) complex catalyst. This asymmetric aldol reaction is effective when using chelating electrophiles such as ethyl glyoxylate; therefore, a-oxazole aldehyde might be employed in the preparation of an optically active oxazole derivative. Indeed, the reaction of KSA generated from S- t Bu ethanethioate with a-oxazole al-
4.5 Asymmetric Total Syntheses of Complex Molecules Using Chiral Diamine–Sn(II) Catalysts
149
N N Me Sn H TfO OTf O TBSO
H
OPh
OH O
(0.2 eq)
OTMS
+ BnO
TBSO SnO (0.2 eq) EtCN, -78 °C 70% (after hydrolysis)
OPh OBn
syn/anti =95/5 >96% ee (syn) O TBSO
H OBn
OH O N H
N
O
N
N O Febrifugine
N
H O
N H
O Isofebrifugine
Scheme 4.17
Synthesis of febrifugine and isofebrifugine.
dehyde took place as expected to afford the corresponding aldol with high ee, and the total synthesis of phorboxazole B was successfully achieved using the adduct as a part of the complex structure (Scheme 4.19) [92]. 4.5.6
Paclitaxel (Taxol)
Mukaiyama and Shiina accomplished the total synthesis of paclitaxel (taxol) by the strategy shown in Scheme 4.20, i.e. synthesis of the eight-membered B ring first, starting from an optically active polyoxy precursor generated by the highly controlled enantioselective aldol reaction and subsequent construction of the fused A and C ring systems on to the B ring [93]. The optically active diol unit 9 was prepared by the asymmetric aldol reaction of a KSA with a benzyloxy group at the C2 position with an achiral aldehyde 8 using a chiral diamine–Sn(II) complex (Scheme 4.21). Synthesis of the eight-membered ring aldols from an optically active polyoxy-group 10 containing all the functionality necessary for the construction of taxol was performed by the intramolecular aldol cyclization using SmI2 . Subsequent acetylation of this mixture of isomeric alcohols and treatment with DBU gave the desired eight-membered enone 11 in good yield.
150
4 Tin-promoted Aldol Reactions and their Application to Total Syntheses of Natural Products
O
O N
Ph O EtO
OTMS H
+
OH O EtO
SPh
CH2Cl 2, -78 °C 97% (after hydrolysis)
O
TESO EtO
N Sn TfO OTf Ph (0.1 eq)
SPh O syn/anti=4/96 94% ee (anti ) O H O
OH O SEt
OMe
O
OTES OH
HO H O
O OH H O
F HO
O HO
HO
OMe
O
O
O O
O
AcO
OAc
OH Altohyrtin C (Spongistatin 2) Scheme 4.18
Synthesis of altohyrtin C (spongistatin 2).
As shown in Scheme 4.22, fully functionalized BC ring system 12 was then synthesized from the optically active eight-membered ring compound 11 by successive Michael addition and intramolecular aldol cyclization of ketoaldehyde. Intramolecular pinacol coupling of the diketone derived from the above BC ring system using a low-valent titanium reagent resulted in the formation of ABC ring system 13, a new taxoid, in good yield. 7-Triethylsilylbaccatin III was prepared from the above new taxoid 13 by oxygenation at the C13 position and construction of the oxetane ring. It was also shown that the asymmetric aldol reaction is useful for preparation of the chiral side chains of taxol (Scheme 4.23). Because reaction of the KSA derived from S-Et benzyloxyethanethioate with benzaldehyde afforded the corresponding aldol adduct 14 in high yield with excellent selectivity, as shown in the last section, this adduct was successfully con-
4.5 Asymmetric Total Syntheses of Complex Molecules Using Chiral Diamine–Sn(II) Catalysts
O
O N
O H
O N
OTMS
+
StBu
Ph
N Sn Ph TfO OTf (0.1 eq)
OH O
Ph
StBu
O N
CH2Cl 2, -78 °C 91% (after hydrolysis)
Ph
94% ee
OH
O O
N
O
Br O
OMe O
HO
O
O
OH N O
OMe Phorboxazole B Scheme 4.19
Synthesis of phorboxazole B.
AcO
O
OH
B RO
A HO
TBS O O
BnO
C
H O O Ac Bz
PMBO
OBn
Scheme 4.20
Retrosynthesis of taxol.
OBn
OTBS OTBS
BnO
B
DO
OPMB
MeO
O
TBSO
+
MeO BnO
O H
OTBS
O H
+
OMe OBn
151
152
4 Tin-promoted Aldol Reactions and their Application to Total Syntheses of Natural Products
MeO MeO
N N Me Sn TfO OTf
OTBS
O +
H
MeO
OMe
MeO
OMe OBn syn/anti =20/80 9; 93% ee (anti )
Bu 2Sn(OAc)2 CH2Cl 2, -23 °C 68%
OBn 8
OH O
BnO
TBS O O
OTBS Br BnO
TBSO
1) SmI2 (70%)
OPMB
OBn 10
O
2) Ac2 O (87%) 3) DBU (91%)
PMBO
OBn 11
Scheme 4.21
Synthesis of the B ring of taxol.
BnO
O
BnO
TBSO
O
AcO
OH
O
OTES
TBSO
PMBO
OBn
PMBO
11
H O
O
OBn 12
O
Scheme 4.22
Synthesis of the ABC ring system of taxol.
O
OTMS H
+
N N Et Sn TfO OTf
OH O SEt
SEt Bu 2Sn(OAc)2 CH2Cl 2, -78 °C 96%
OBn
BzHN
OBn syn/anti=1/99 14; 96% ee (anti) Ph
O SEt OBn
Scheme 4.23
Synthesis of the side chain of taxol.
OH
BzN O PMP
O
15
13
4.5 Asymmetric Total Syntheses of Complex Molecules Using Chiral Diamine–Sn(II) Catalysts
AcO
HO HO
O
OTES
HO O H Bz
O
7-Triethylsilylbaccatin III
1) 15, DPTC DMAP (95%) 2) TFA (93%)
AcO BzHN
O
OH
O
Ph
O OH
HO
HO O H Bz
O
Paclitaxel (Taxol ®)
Scheme 4.24
Synthesis of taxol.
verted into the targeted b-amino acid 15 in good yield, with inversion of chirality at the b-position, by use of the Mitsunobu reaction. Introduction of N-benzoylphenylisoserine 15 to 7-triethylsilylbaccatin III was further studied, and dehydration condensation was found to proceed smoothly using DPTC (O,O-di(2-pyridyl)thiocarbonate) as a novel coupling reagent in the presence of DMAP to afford the desired ester in 95% yield at 93% conversion (Scheme 4.24) [93e, 94]. Finally, deprotection of the intermediate gave the final target molecule taxol in excellent yield. This established a new method for asymmetric synthesis of baccatin III by way of B to BC to ABC to ABCD ring construction and completion of the total synthesis of taxol by preparation of the side chain by asymmetric aldol reaction and subsequent dehydration condensation with 7-TES baccatin III using DPTC. This synthetic route would be widely applicable to the preparation of a variety of derivatives of taxol and related taxoids. 4.5.7
Cephalosporolide D
Shiina developed a method for preparation of cephalosporolide D, a natural eight-membered ring lactone, and the exact stereochemistry of this compound was determined through the first total synthesis (Scheme 4.25) [95]. In this synthetic strategy two asymmetric carbon atoms were constructed by the asymmetric aldol reaction using the KSA derived from S-Et ethanethioate. It is also mentioned that the second diastereoselective aldol reaction afforded the desired compound in 3:97 ratio when using the chiral diamine ent-2a–Sn(II) complex and that the ratio ranges from 97:3 to 59:41 when the 2a–Sn(II) complex or SnCl 4 was used as a catalyst. The desired eightmembered ring lactone moiety was constructed by cyclization of the seco acid via a novel mixed-anhydride method using (4-trifluoromethyl)benzoic anhydride (TFBA) with Hf(OTf )4 [96]. 4.5.8
Buergerinin F
The synthesis of buergerinin F, a natural compound consisting of a unique tricyclic skeleton, was achieved in the course of synthetic studies by Shiina
153
154
4 Tin-promoted Aldol Reactions and their Application to Total Syntheses of Natural Products
N N Me Sn H TfO OTf
OTMS
O
OH O
+ SEt
H
OTBS
O
SEt 96%ee
Bu3SnF CH2Cl 2, -95 °C 78%
N N Me Sn H TfO OTf
OTMS
OTBS
OH O
+ H
OH
SEt
Bu3SnF CH2Cl 2, -78 °C 89%
TFBA Hf(OTf) 4
OBn O OH
SEt ent-2a-Sn(OTf)2 ; syn/anti =3/97 2a-Sn(OTf)2; 62%, syn/anti =97/3 SnCl4; 62%, syn/anti =59/41
H2, Pd/C
O O
OH
MeCN reflux Chephalosporolide D
Scheme 4.25
Synthesis of cephalosporolide D.
on the utilization of the asymmetric aldol strategy [97]. The first key step is producing the optically active a,b,g 0 -trioxy ester including an asymmetric quaternary carbon at the C2 position as shown in Scheme 4.26. It was also revealed that enantioselective aldol reaction of tetrasubstituted KSA with four oxygenated functional groups is quite effective for preparation of this complex synthetic intermediate. Successive intramolecular Wacker-type ketalization and one-carbon elongation of the intermediate afforded the optically active buergerinin F. On completion of the total synthesis using the asymmetric aldol reaction promoted by chiral diamine–Sn(OTf )2 as catalyst, the absolute stereochemistry of natural buergerinin F was determined. 4.5.9
Octalactins A and B
Shiina recently developed a new method for synthesis of octalactin A, an antitumor agent consisting of an eight-membered ring lactone (Scheme 4.29) [98]. Because the lactone moiety includes two pairs of anti-b-hydroxya-methyl groups, enantioselective addition of the KSA derived from ethyl 2methylthiopropanoate was efficiently used for construction of the required
4.5 Asymmetric Total Syntheses of Complex Molecules Using Chiral Diamine–Sn(II) Catalysts
OTMS
O
+
TBSO
H
OMe OBn 84/16
N N Me Sn H TfO OTf
O TBSO BnO
Bu 2Sn(OAc)2 EtCN, -78 °C 62%
OAc
HO H
OSiMe 2CMe 2Ph
OMe
OH H syn/anti =98/2 93% ee (syn)
PdCl2
HO
155
OAc
O O CuCl, O2
H
OSiMe 2CMe 2Ph
O O O H Buergerinin F Scheme 4.26
Synthesis of buergerinin F.
components, i.e. asymmetric aldol reaction of the tetrasubstituted KSA with aldehydes [78] and subsequent treatment of the optically active adducts formed with Guidon’s reduction [99] afforded the desired two chiral segments 16 and 17 (Scheme 4.27). The optically active side chain 18 was also produced by means of the asymmetric aldol reaction of the KSA derived from S-Et ethanethioate with 2-methylpropionaldehyde (Scheme 4.28). A chiral linear precursor having repeated anti-b-hydroxy-a-methyl units was obtained by coupling segments 16 and 17, and the resulting seco acid was eventually cyclized to form the eight-membered ring lactone by a new quite effective mixed-anhydride method using 2-methyl-6-nitrobenzoic anhydride (MNBA) with DMAP, as shown in Scheme 4.29 [100, 98b]. Finally, the side chain 18 was introduced to the eight-membered ring lactone moiety to afford the targeted multioxygenated compounds, octalactins A and B. 4.5.10
Oudemansin-antibiotic Analog
Uchiro and Kobayashi recently reported the synthesis of b-methoxyacrylate antibiotics (MOA) and their analogs (Scheme 4.30) [101]. In accordance with their strategy for preparation of the related compounds, asymmetric aldol reaction of the KSA generated from S-Et propanethioate with cinnamyl aldehyde was used for stereoselective synthesis of the intermediate of an MOA analog, as shown in Scheme 4.30.
156
4 Tin-promoted Aldol Reactions and their Application to Total Syntheses of Natural Products
O +
MeS
OEt
H
TIPSO
N N Me Sn H TfO OTf
OTMS
E/Z=12/88
Bu3SnF CH2Cl 2, -78 °C 56%
OH O OEt
TIPSO MeS syn/anti =96/4 87% ee (syn) OBn TBSO
PPh 3I 16
O +
TIPSO
N N Me Sn H TfO OTf
OTMS MeS
OEt
H
E/Z=12/88
Bu3SnF CH2Cl 2, -78 °C 50%
OH O TIPSO
OEt SMe
syn/anti =87/13 69% ee (syn) PMP O
O
H O 17 Scheme 4.27
Synthesis of two chiral segments of octalactins A and B.
N N Me Sn H TfO OTf O
OTMS H
(0.2 eq.)
OH O
+ SEt
EtCN, -78 °C 48% (after hydrolysis)
SEt 90% ee OTBS I 18
Scheme 4.28
Synthesis of the side chain of octalactins A and B.
4.6 Conclusions
157
O O
OH
OBn
HO
MNBA OTBDPS
DMAP CH2 Cl2 rt, 13 h
TBDPSO
O
O 18 OH
O
OBn
O
O
OH
OH
O
O
O Octalactin A
Octalactin B Scheme 4.29
Synthesis of octalactin A and B.
4.6
Conclusions
In this chapter a variety of Sn(IV) or Sn(II) metallic species-promoted aldol reactions have been presented, with their application in syntheses of complicated molecules with high stereoselectivity. Alkoxy aldehydes were effectively activated by SnCl 4 , and reactions with particular ESE or KSA are highly applicable to the generation of 3,4-syn aldol compounds with high diastereoselectivity. Intramolecular reaction of ESE and KSA with an acetal moiety is also quite attractive for preparation of medium-sized compounds which are generally not available by other methods. Sn(II)-promoted asymmetric aldol reaction could be now used as a general and powerful method for the construction of not only optically active small molecules but highly
OTMS
O + Ph
H
SEt
N N Me Sn H TfO OTf Bu 2Sn(OAc)2 CH2Cl 2, -78 °C 92%
OH O Ph
SEt 98% ee OMe O MeO
OMe
Oudemansin-type Analog Scheme 4.30
Synthesis of oudemansin-antibiotic analog.
OH
158
4 Tin-promoted Aldol Reactions and their Application to Total Syntheses of Natural Products
advanced multifunctional compounds. Progress in aldol reactions using tin reagents has contributed greatly to the syntheses of many useful substrates in the last decade, and this fruitful history might provide valuable information to organic and organometallic chemistry in the future.
4.7
Experimental Typical Procedure for Catalytic Asymmetric Aldol Reaction of a KSA with Simple Achiral Aldehydes (Eqs. (80) and (81)) [61d]. A solution of 2a (21.1 mg, 0.088 mmol) in EtCN (1 mL) was added to a solution of Sn(OTf )2 (33.4 mg, 0.080 mmol, 20 mol%) in EtCN (1 mL). The mixture was cooled to 78 C and a mixture of KSA (0.40 mmol) and an aldehyde (0.40 mmol) in EtCN (1.5 mL) was then added slowly over 3–4.5 h by means of a mechanical syringe. The mixture was further stirred for 2 h, and then quenched with saturated aqueous NaHCO3 . The organic layer was isolated and the aqueous layer was extracted with CH2 Cl2 (three times). The organic solutions were combined, washed with H2 O and brine, then dried over Na2 SO4 . After evaporation of the solvent the crude product was purified by preparative TLC on silica gel to afford an aldol-type adduct as the corresponding trimethylsilyl ether. The trimethylsilyl ether was treated with THF–1 m HCl (20:1) at 0 C to give the corresponding alcohol. Typical Procedure for Catalytic Asymmetric Aldol Reaction of a KSA with Ethyl Glyoxylate (Eqs. (84) and (86)) [65a]. (S,S)-bis(Benzyloxazoline) (19.9 mg, 0.055 mmol) and Sn(OTf )2 (20.8 mg, 0.050 mmol) were placed, within an inert atmosphere box, in an oven-dried 8-mL vial containing a magnetic stirring bar. The flask was fitted with a serum cap, removed from the inert atmosphere box, and charged with CH2 Cl2 (0.8 mL). The resulting suspension was stirred rapidly for 1 h to give a cloudy solution. The catalyst was cooled to 78 C and the KSA (0.50 mmol) was added followed by distilled ethyl glyoxylate–toluene solution (8:2 mixture, 100 mL, 0.75 mmol). The resulting solution was stirred at 78 C until the KSA was completely consumed (0.1–2 h), as determined by TLC. The reaction mixture was then filtered through a 0.3 cm 5 cm plug of silica gel, which was then washed with Et2 O (8 mL). Concentration of the ether solution gave the crude silyl ether which was dissolved in THF (2 mL) and 1 m HCl (0.2 mL). After standing at room temperature for 0.5 h this solution was poured into a separatory funnel and diluted with Et2 O (20 mL) and H2 O (10 mL). After mixing the aqueous layer was discarded and the ether layer was washed with saturated aqueous NaHCO3 (10 mL) and brine (10 mL). The resulting ether layer was dried over anhydrous Na2 SO4 , filtered, and concentrated to furnish the hydroxy esters. Purification by flash chromatography provided the desired aldols.
References
Typical Procedure for Synthesis of an Optically Active Diol Group by Asymmetric Aldol Reaction (Eq. (88)) [67b, 93f ]. A solution of 1a or 1b (0.405 mmol) in CH2 Cl2 (0.5 mL), then a solution of Bu2 Sn(OAc)2 (131.1 mg, 0.373 mmol) in CH2 Cl2 (0.5 mL), were added successively to a suspension of Sn(OTf )2 (141.8 mg, 0.340 mmol) in CH2 Cl2 (1 mL). The mixture was stirred for 30 min at room temperature, then cooled to 78 C. A solution of 2-benzyloxy-1-ethylthio-1-(trimethylsiloxy)ethene (96.1 mg, 0.340 mmol) (Z=E ¼ 9:1, the E isomer has no reactivity) in CH2 Cl2 (0.5 mL), and a solution of aldehyde (0.228 mmol) in CH2 Cl2 (0.5 mL) at 78 C, were then added successively to the reaction mixture. The mixture was further stirred for 20 h then quenched with saturated aqueous NaHCO3 . The organic layer was isolated and the aqueous layer was extracted with CH2 Cl2 (three times). The organic solutions were combined, washed with H2 O and brine, then dried over Na2 SO4 . After evaporation of the solvent the crude product was purified by preparative TLC on silica gel to afford the corresponding antia,b-dihydroxy thioester derivatives. References 1 (a) Mukaiyama, T.; Narasaka, K.; Banno, K. Chem. Lett. 1973,
2 3
4 5
6
7
8 9
1011. (b) Mukaiyama, T.; Banno, K.; Narasaka, K. J. Am. Chem. Soc. 1974, 96, 7503. (c) Saigo, K.; Osaki, M.; Mukaiyama, T. Chem. Lett. 1975, 989. (d) Mukaiyama, T. Org. React. 1982, 28, 203. (e) Mukaiyama, T.; Narasaka, K. Org. Synth. 1987, 65, 6. Wissner, A. Synthesis 1979, 27. (a) Lozzi, L.; Ricci, A.; Taddei, M. J. Org. Chem. 1984, 49, 3408. (b) Brownbridge, P.; Chan, T.-H. Tetrahedron Lett. 1980, 21, 3427. (a) Nakamura, E.; Kuwajima, I. Chem. Lett. 1983, 59. (b) Nakamura, E.; Kuwajima, I. Tetrahedron Lett. 1983, 24, 3347. (a) Kuwajima, I.; Inoue, T.; Sato, T. Tetrahedron Lett. 1978, 4887. (b) Inoue, T.; Sato, T.; Kuwajima, I. J. Org. Chem. 1984, 49, 4671. (a) Ponomarev, S. V.; Bankov, Y. I.; Dukukina, O. V.; Petrosyan, I. V.; Petrovskaya, L. I. J. Gen. Chem. USSR 1967, 37, 2092. (b) Noltes, J. G.; Creemers, H. M. J. C.; Van Der Kerk, G. J. M. J. Organomet. Chem. 1968, 11, 21. (c) Pereyre, M.; Bellegarde, B.; Mendelsohn, J.; Valade, J. J. Organomet. Chem. 1968, 11, 97. (d) Pereyre, M.; Quintard, J.-P.; Rahm, A. Tin in Organic Synthesis, Butterworths, London, 1987. (a) Yasuda, M.; Katoh, Y.; Shibata, I.; Baba, A.; Matsuda, H.; Sonoda, N. J. Org. Chem. 1994, 59, 4386. (b) Yasuda, M.; Hayashi, K.; Katoh, Y.; Shibata, I.; Baba, A. J. Am. Chem. Soc. 1998, 120, 715. Yamamoto, Y.; Yatagai, H.; Maruyama, K. J. Chem. Soc. Chem. Commun. 1981, 162. (a) Shenvi, S.; Stille, J. K. Tetrahedron Lett. 1982, 23, 627. (b) Labadie, S. S.; Stille, J. K. Tetrahedron 1984, 40, 2329.
159
160
4 Tin-promoted Aldol Reactions and their Application to Total Syntheses of Natural Products 10 (a) Mukaiyama, T.; Stevens, R. W.; Iwasawa, N. Chem. Lett.
11
12
13
14 15
16
17 18
19
20
21
22 23 24
1982, 353. (b) Mukaiyama, T.; Iwasawa, N. Chem. Lett. 1982, 1903. (c) Mukaiyama, T.; Iwasawa, N.; Stevens, R. W.; Haga, T. Tetrahedron 1984, 40, 1381. (a) Heathcock, C. H.; Hug, K. T.; Flippin, L. A. Tetrahedron Lett. 1984, 25, 5973. (b) Heathcock, C. H.; Davidsen, S. K.; Hug, K. T.; Flippin, L. A. J. Org. Chem. 1986, 51, 3027. (c) Heathcock, C. H.; Montgomery, S. H. Tetrahedron Lett. 1985, 26, 1001. (d) Montgomery, S. H.; Pirrung, M. C.; Heathcock, C. H. Carbohydrate Res. 1990, 202, 13. (a) Reetz, M. T.; Kesseler, K.; Jung, A. Tetrahedron Lett. 1984, 25, 729. (b) Reetz, M. T.; Kesseler, K.; Jung, A. Tetrahedron 1984, 40, 4327. (c) Reetz, M. T.; Kesseler, K.; Schmidtberger, S.; Wenderoth, B.; Steinbach, R. Angew. Chem. Int. Ed. Engl. 1983, 22, 989. (d) Reetz, M. T. Angew. Chem. Int. Ed. Engl. 1984, 23, 556. (e) Reetz, M. T.; Kesseler, K. J. Org. Chem. 1985, 50, 5434. (f ) Mahrwald, R. Chem. Rev. 1999, 99, 1095. (a) Gennari, C.; Bernardi, A.; Poli, G.; Scolastico, C. Tetrahedron Lett. 1985, 26, 2373. (b) Gennari, C.; Beretta, M. G.; Bernardi, A.; Moro, G.; Scolastico, C.; Todeschini, R. Tetrahedron 1986, 42, 893. (c) Gennari, C.; Cozzi, P. G. Tetrahedron 1988, 44, 5965. (d) Gennari, C. Comprehensive Organic Synthesis, Pergamon Press, 1991, Vol. 2, 629. Uenishi, J.; Tomozane, H.; Yamato, M. Tetrahedron Lett. 1985, 26, 3467. (a) Bernardi, A.; Cardani, S.; Gennari, C.; Poli, G.; Scolastico, C. Tetrahedron Lett. 1985, 26, 6509. (b) Bernardi, A.; Cardani, S.; Colombo, L.; Poli, G.; Schimperna, G.; Scolastico, C. J. Org. Chem. 1987, 52, 888. (a) Guanti, G.; Banfi, L.; Narisano, E.; Scolastico, C. Tetrahedron Lett. 1985, 26, 3517. (b) Banfi, L.; Cardani, S.; Potenza, D.; Scolastico, C. Tetrahedron 1987, 43, 2317. Mikami, K.; Kaneko, M.; Loh, T.-P.; Terada, M.; Nakai, T. Tetrahedron Lett. 1990, 31, 3909. (a) Annunziata, R.; Cinquini, M.; Cozzi, F.; Cozzi, P. G. Tetrahedron Lett. 1990, 31, 6733. (b) Annunziata, R.; Cinquini, M.; Cozzi, F.; Cozzi, P. G.; Consolandi, E. J. Org. Chem. 1992, 57, 456. (a) Ewing, W. R.; Harris, B. D.; Li, W.-R.; Joullie´, M. M. Tetrahedron Lett. 1989, 30, 3757. (b) Li, W.-R.; Ewing, W. R.; Harris, B. D.; Joullie´, M. M. J